AutoConfig questions with other Oracle homes

Similar Questions

• Give advice about uninstalling the database Client Oracle under Windows with multiple Oracle homes

  Hi all.

  Probably a Client of Oracle database uninstall will arrive in a Windows box, where there are several houses of Oracle:

  (1) the Oracle Database 11 g Client is.

  (2) the House of Oracle Oracle database server.

  (3) oracle 6i Oracle Home.

  I have these concerns:

  (1) do I stop Oracle Services NOT related to the Oracle Home being deleted? I guess that's not necessary, but it is recommended?

  (2) the YES program to run must be or is better to use the YES program located at removed Oracle (Oracle Client to Database 11 g in this situation)?

  "(3) I see there are additional post - installation according to section 5.3 steps"manually remove the Oracle database Client components remaining' the Oracle Client Installation Guide for Windows.

  Could someone provide the additional steps or recommendations?

  Sorry but I do not trust the windows plataform much!

  Thanks in advance!

  Best regards, Luis!

  Hello myluism,

  You can use the oracle supplied binary dinstall to uninstall oracle binaries that you can download from this url of Oracle Database 11 g Release 2 for Microsoft Windows (x 64) that looks good in your context.

  In addition, you can also uninstall the binary files by running the dinstall respecitive houses Oracle located in the path: ORACLE_HOME\dinstall.

  Please go through the url: https://docs.oracle.com/cd/E11882_01/install.112/e47959/deinstall.htm#NTCLI1326

  I hope this helps.

  Thank you and best regards.

• WRT160N + RTP300 + questions with others for access with PSP and teamspeak

  Seen with the RTP300 Vonage phone service, I was able to port forward to allow TeamSpeak work properly. In other words, others may join my server. I installed the WRT160N, with a secure network, to work the long side of the RTP300 last night and now nobody is able to join the server. Get the error is that the server is offline, when it is not. I went through and made the redirection of port, as directed by portforwad.com, nothing helped.

  As I have had this set up prior to the installation of the new router, long set my firewall to allow this program to run/gain access.

  In addition to that, my stepson is now having problems when it tries to connect to the internet with his PSP and I don't know exactly how to go about this peripheral access via the wireless router.

  The IP address of your new router is 192.168.1.1.

  Assuming that your RTP300 router running the IP 192.168.15.1 default, connect the router to the ethernet port RTP300 1 for the WRT160N router to the ethernet port 1 (not the Internet Port)... To connect to a computer to Port 2 of the WRT160N router...

  Press and hold the reset button on your router (WRT160N) for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  Access to the web interface of the router WRT160N, open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...

  On the configuration in Network Configuration tab, change the IP Address of the router to 192.168.15.10, disable the DHCP server and click on save settings... Wait a while and unplug the power cable from your router, wait 30 seconds and reconnect the power cable...

  Your wireless router needs to be configured, and the computers connected to the wireless router should be able to access the Internet...

• Can someone give me an answer to confirm if netbooks with Windows XP Home, Vista Home Edition, Windows 7 starter (these BONES other than professional or company) be used in a corporate environment...

  Original title: Netbook Licensing

  Can someone give me an answer to confirm if netbooks with Windows XP Home, Vista Home Edition, Windows 7 starter (these BONES other than professional or company) be used in a business, connected to the server environment to share files?

  I read somewhere that these permits cannot connect to a domain, is this true?

  Of coz these OS has not input parameters are even to join a domain, how can they connect?

  CAN, that my understanding of that statement means that it cannot be connected to a domain server, means that the netbook cannot be connected to the server to access files shared server?

  Can the netbook share files with other computers (vice versa), other than a domain server, on a network of companies?

  So what my final question is a netbook can exist in an enterprise environment? What's a standalone machine?

  I'm not able to get an answer very Microsoft Singapore confirm after the call to them.

  Hello

  Computers running Windows 7 Starter Edition cannot connect to a domain.

  Reference: Networking in Windows 7 Starter

• I have a question why U removed the session of keyboard spelling checker is a very useful sit Apple give it in products. It helps a lot in communicting with others from different countries, even in our studies and the communication

  I have a question why U removed the session of keyboard spelling checker is a very useful sit Apple give it in products. It helps a lot in communicting with others from different countries, even in our studies and communication with our teachers.plz it back... .hope you will do

  Nothing has been deleted. Perhaps if you explain better what it is you are looking for, a person might be able to help. You mean maybe predictive text? All these settings are in settings > general > keyboard.

• My home, end, PG. PREC and PG. Next buttons do not work in Firefox 4.0.1. They work with other programs.

  My home, end, Page Up and Page down on my keyboard keys do not work in Firefox 4.0.1. They work with other programs and worked with the previous version of Firefox...

  Press F7 and see which suits him.

  http://KB.mozillazine.org/accessibility.browsewithcaret

• Have a Dell PC with Windows XP Home Edition with restoration, internet and the program of the questions that I went into the details in the body of the present.

  I have a Dell with Windows XP Home Edition system that uses the internet connection. Friday, he had a problem with images in line being "pixel-ed", which means that the image was blurred and boxes. So I did a restore of the system back as much as she would in July and concluded that the IAF has a program called accelerator that had been implemented to go faster, but eventually would make very good images. Then, I got that part fixed but now a game that I play "Mahjongg" won't play right and when I go to the area "help and support" to try to reschedule, so it don't open even now. Can someone help me please? Thank you

  Thanks for the help. I returned and reinstalled everything, even if it was already installed and now everything works.

• opatch 10.1.2 Oracle Home - ERROR: OPatch failed due to problems in the area of patch.

  Hi all

  DB: 11.2.0.3.0

  EBS:12.1.3

  Operating systems: Solaris SPARC 64-bit

  I get the following error message on the command below:

  opatch $ apply - invPtrLoc $ORACLE_HOME/oraInst.loc

  Setup Oracle interim Patch version 1.0.0.0.64
  Copyright (c) 2011 Oracle Corporation. All rights reserved...

  Oracle recommends using the latest version of OPatch
  and read the OPatch documentation in the docs/OPatch
  Directory for its use. For more information on the last OPatch and
  other support issues, please refer to document ID 293369.1
  available on My Oracle Support (https://myoraclesupport.oracle.com)

  Oracle home: /d001/test1/apps/tech_st/10.1.2
  The Oracle Home Inventory: /d001/test1/apps/tech_st/10.1.2/inventory
  Inventory Center: / export/home/applmgr/oraInventory
  from: /var/opt/oracle/oraInst.loc
  YES location: /d001/test1/apps/tech_st/10.1.2/oui
  YES shared library: /d001/test1/apps/tech_st/10.1.2/oui/lib/solaris/liboraInstaller.so
  Location of Java: /d001/test1/apps/tech_st/10.1.2/jdk/jre/bin/java
  Location of the log file: /d001/test1/apps/tech_st/10.1.2/.patch_storage/ < patch ID > / *.log

  The patch directory field must be a number.

  ERROR: OPatch failed due to problems in the area of patch.

  $ opatch version

  Setup Oracle interim Patch version 1.0.0.0.64
  Copyright (c) 2011 Oracle Corporation. All rights reserved...

  Oracle recommends using the latest version of OPatch
  and read the OPatch documentation in the docs/OPatch
  Directory for its use. For more information on the last OPatch and
  other support issues, please refer to document ID 293369.1
  available on My Oracle Support (https://myoraclesupport.oracle.com)

  OPatch Version: 1.0.0.0.64

  Tried the underside of the notes but the error persists. Even tried several times 'p6880880_101000_SOLARIS64.zip' to download and unzip on the server, but of no use. This question took place now for a few days.

  (Error: OPatch failed due to problems in the area of the Patch [ID 1281504.1]).

  Opatch error: The Patch Directory area must be a number [258650.1 ID]

  O patch 1.0 . 0.0.55 fails with the error 'the Patch directory field must be a number' [ID 394601.1]

  Patch Directory area must be a number: Opatch returns with the Code error = 170 [369555.1 ID]

  Please let me know any other suggestion is appreciated as the runinstaller from Patch 5983622 -Upgrade to Forms 10 g OracleAS and statement 10.1.2.3 (437878,1) fails after running root.sh Run specific tasks.

  I'm upgrading to 10.1.2.3.0 forms using - reclassification OracleAS g 10 forms and States to 10.1.2.3 (437878.1)

  Thank you for your time

  Kind regards

  user10088255

  Hi user10088255,

  Please follow the procedure under the section 'How to check the contents of the inventory Central' (Doc ID 742477.1) to check whether or not 10.1.2 ORACLE_HOME is registered in the central inventory. If it is not registered then follow one of the methods in the same doc to add.

  Thank you

  Hussein

• SSRS for lack of outer join with the Oracle data source

  It seems to be a problem with the Oracle driver used in the Reporting SERVICES query designer.

  When you use an Oracle data source, if I create an outer join in the graphic designer, it automatically inserts '{OJ' before the join and '} ' after her.  This is an incorrect syntax for Oracle and refuses to start.  The curly braces and the JO editable in designer text, but if I go back to the graphic designer and immediately to reintegrate them.

  Only, this has started to happen a year or two ago - before that it worked, but with the old (+) syntax.

  Can it not be healed?  It makes things very difficult.

  -Geoff

  Hi Geoff,

  Thanks for posting in the Microsoft Community.

  However, the question you posted would be better suited in the Forums of the Oracle Support; We recommend that you post your query in Oracle Support Forums to get help:

  https://forums.Oracle.com/forums/main.jspa;JSESSIONID=8d92100c30d8fb401bcbd10b46c38c9ddf1a3242549a.e34SbxmSbNyKai0Lc3mPbhmSc3aNe0? CategoryID = 84

  If you have any other questions or you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• H9-1150 Pavilion: H9-1150 PC does not start with WIndows 7 Home Premium 64-bit with ASUS 960 GTX card.

  I've seen others have posted simular questions, but I thought id repost this even in the case where there is more help.  I have the Elite Phönix Pavalion h9-1150 desktop with Windows 7 Home premium 64-bit.  and the bios HP 7.07 (seems no possible to upgrade the bios).

  As others have had I install the new graphics card, the 960 Asus GTX card that came out last month and the system start gives about 3 beeps in about 30 seconds and then it goes to a screen that is black with a blinking cursor and nothing else happens. cannot enter bios or settings for HP...

  I tried to disable UEFI boot devices in bios settings and enable only the legacy devices (after him swinging back on my original card, then move on to the new card), but it still gives 3 beeps after the start.   However, I was able to get into windows. Although I think that this may be due to turn off the computer with the old card in without power first. and after 3 beeps (which always blocks you on the bios menu) sometimes it appears the window where you can select the safe mode or normal mode... as sometimes happens if you start your computer with windows 7 If you had just it off without turning off power or something.  There, I can get into windows and run the PC and graphics card without problem, it's just when I try to start the problem happens.

  and suppor HP no. is NOT a fault of the card itself. As much before. I bought an EVGA card earlier a GTX 780 and SAME problem happened (although I have not tried to remove it then devices boot UEFI)...

  There is a problem of spacific with HP computers that seem to lock 'new' start-up equipment.

  Honestly not be blunted. I really think it's bad what I read somewhere that even if HP would never say it they do it on purpose to prevent people ruin of guarantee or any "liabity' that occur by people any other hardware on HP computers inventory installation

  makes no since to me.  the PC SHOULD be able to run the card. in fact his race he now once I was able to circumvent the blocking (temporarily) check markers, everyhting is fine tracks of card 3 times faster then old (that should be the case).

  But it's just this block as HP for some reason any installed on their bios/cards mothers is the question.

  Good news is I got it from amazon and I have about a month, until I return. which I think this time I'll make.  to see if something pops up in a month or something.

  It's the ONLY solution, it seems that HP has officially to deactivate start secure Windows 8

  but this isn't a computer of windows 8. and I guess even if install windows 8. the issue wouldn't disappear because given that its an older bios, there is no way to have a secure boot option to delete?

  HP you really need to get on the ball and give us a straight answer on this subject.  Is it ALL WAY to solve this problem? Can you not just do an older BIOS update to allow this? Or do you simply not want to worry about old PCs?

  anyway I think that it is wrong and very frustrating and to be honest. If this is the case when my pc otherwise MUST run on demand

  It's a PCI express 16 x slot card that is 3.0

  Here are the specifications of deetailed according to the guidelines of your page

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c03273835

  the card SHOULD WORK fine.  I thought the GTX 780 was a little too much for the PC as he had more then a six pin port and needed a little more power, so at first I thought it was the question. so I returned it. and has now got this new card.

  However, the ASUS GTX 960 map requires the SAME power that the card GTX 550 it by default and the SAME SIX connector

  so it SHOULD work.

  and performance tests indicate that it FACT it's just stupid... bios that asks the question.

  I'm afraid to turn off the computer at the moment and try again to see if windows starts normally after you turn off the startup UEPI devvices because he cannot start properly...

  HP you are one of the largest suppliers of computers you know technology what are YOUR computers.  WHY cant you give us a direct awnser on this.

  ITS VERY frustrating

  and to be honest if I can't solve this problem, I am very hestient never buy another product HP if their spacifically computers have this new method of hardware locking.

  because I have the card now works on my pc, it runs great! 3 times as fast as it should! and yet, I know in the back of my mind, if I can't understand this bad likely issue just to send it back... less I have time.

  and for now, I did not have money to buy a new pc. This PC is JUST perfect for what I need for now another card then you want a little better...

  He shoudnt be as much hassle there?

  Thank you.

  Hello

  You need update the BIOS that is listed under Windows 8 to support the new graphics.   You must upgrade to Windows 8 or temporarily install Windows 8, you can install the update to the BIOS.  While there may be other ways to install the BIOS update, clearly having Windows 8 running will be the safest way.  8 BIOS version is your best chance to get the latest graphics cards to work.

  You can Windows 8 Enterprise 90 days trial.

  If you decide to install W8, then create external recovery HP Media and backup your data before doing anything.

  The reality is that there is no guarantee that any particular graphics card will work in any particular PC, even if the graphics card works in other PC or even the same or similar model PCs. Know what the return policy is before you buy.

• You want to run the software RAID (more precisely 5) included with Windows Vista Home Premium. Do you know where I can find documentation and how - in?

  You want to run the software RAID (more precisely 5) included with Windows Vista Home Premium.  Do you know where I can find documentation and how - in?

  Hello

  Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.
  Please post your question in the below link:
  http://social.technet.Microsoft.com/forums/en/IECs/threads

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Microsoft version multiscreen 1.5 does not work with windows 7 Home premium

  He says that it is not compatible with windows 7 Home premium, what should I use then?

  I'm not familiar with this program, you have a link where you download from, and details of the product etc. ?

  Have you tried right clicking on the shortcut to the program or the .exe and select "Run As Administrator"?  Perform, even if your user name is an administrator.

  Try right click on the actual Setup.exe and choosing the option "Run As Administrator"?  Perform, even if your user name is an administrator.

  Make older programs in this version of Windows (Windows 7)
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Help with Windows 7 compatibility issues
  http://Windows.Microsoft.com/en-us/Windows7/help/compatibility

  Windows 7 Compatibility Center
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows Virtual PC
  Download Windows XP Mode
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  Windows XP Mode (Windows 7 only, but not one of the Home versions) "you are not eligible to download Windows XP Mode. You must have Windows 7 Professional, enterprise or full to run Windows XP Mode."    If you have an old XP CD (or other older Windows CD) available you can simply download the Virtual Machine and spend the XP Mode download.

  This warranty covers the gambit set of VMS in the 'Home' versions if you want to have a look.  Of course you will need a licensed copy of XP to install and run in any of them (except XP Mode).

  VirtualBox is an impressive VM competitor
  http://WindowsSecrets.com/search/?CX=017937947691920082874%3A_ilcm6kdy_y&COF=FORID%3A11&q=VirtualBox+is+an+impressive+VM+contender+&SA=search&advWS=1&advSAN=1&advPages=15

  Upgrade to another edition of Windows 7 by using Windows Anytime Upgrade
  http://Windows.Microsoft.com/en-us/Windows7/help/videos/upgrade-to-another-edition-of-Windows-7-by-using-Windows-Anytime-Upgrade

  Windows Anytime Upgrade: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Anytime-Upgrade-frequently-asked-questions

• EM. Oracle.Home not set in installation simple soa

  Hello

  I have a script for silent installation that installs and configures a basic installation of 12 c SOA. I founded some of the scripts on an example of middlewaresnippets.com.

  In short, the scripts are;

  • Install Oracle DB SE2
  • Install Oracle JDK 8u60
  • Install the Infrastructure FMW 12.1.3.0.0 (include PS5)
  • Install the BPM (including SOA)
  • Run the RCU
  • Creates areas etc.

  When you are finished, the nodemanager, adminserver, and soa server can be started. There are only a few error messages in the AdminServer.out that are bugging me.

  [code]

  < 13 November 2015 14:41:23 THIS > < WARNING > < oracle.as.jmx.framework.wls.spi.ComponentMBeans > < J2EE JMX-46714 > < error analysis of the MBean descriptor file "fmwconfig/mbeans/em_mbeans.xml".

  java.io.FileNotFoundException: jar the MBean Config file ' / u01/data/domains/soa12c/config/fmwconfig/mbeans/${em.oracle.home}/jlib/em-core-ccw-pojo.jar ' does not exist.

  at oracle.as.jmx.framework.generic.spi.BaseJMXFrameworkProviderImpl.getMBeanLoader(BaseJMXFrameworkProviderImpl.java:594)

  at oracle.as.jmx.framework.generic.spi.BaseJMXFrameworkProviderImpl.getConfigObjectMBeanAssociationInfo(BaseJMXFrameworkProviderImpl.java:352)

  at oracle.as.jmx.framework.generic.spi.BaseJMXFrameworkProviderImpl.getConfigObjectMBeanAssociationInfo(BaseJMXFrameworkProviderImpl.java:277)

  < 13 November 2015 14:41:39 THIS > < error > < oracle.adf.share.config.ADFMDSConfig > < BEA-000000 > < MDS Configuration Exception encountered in parse ADF ConfigurationMDS-01330: cannot load the MDS configuration document

  MDS-01329: cannot load the item "persistence-config".

  MDS-01370: MetadataStore for metadata-store-use "writable" Configuration is not valid.

  [/ code]

  Most of the other errors seems to be associated with em, specifically the em.oracle.home. When to check the AdminServer.out at the start of the AdminServer environment variable seems also not to be defined.

  The installer is basically;

  • read the weblogic (wls.jar) model, set some basic as etc domain name options and write the field.
  • read the field and add the model bpm (oracle.bpm_template_12.1.3.jar)
  • Set up the domain
    • setOption ('AppDir', domain_app_home);
    • create a machine
    • create a cluster of soa and add the soa server to the cluster

  When validating deployments in the WLC the em.ear aims the AdminServer, but is failing. Targets of the MA has an em, the default (webapp) component and the empty.jar.

  If necessary I can post scripts

  See you soon,.

  Peter

  For the benefit of third parties, the problem has caused a bad addition to the EXTRA_JAVA_PROPERTIES.

  A setUserOverrides.sh in the "/ bin" that contains the following statements.

  [code]

  EXTRA_JAVA_PROPERTIES = ""-Djava .net .preferIPv4Stack = true ' "

  export EXTRA_JAVA_PROPERTIES

  [/ code]

  The setUseOverrides.sh is run after the setSOADomainEnv.sh and therefore replaces the settings.

  By adding the new EXTRA_JAVA_PROPERTIES it is all ok works again... phew :-)

  [code]

  EXTRA_JAVA_PROPERTIES = "-Djava .net .preferIPv4Stack = true, ${EXTRA_JAVA_PROPERTIES}" "

  export EXTRA_JAVA_PROPERTIES

  [/ code]

• The locked but user can access with other users

  Hi all

  I blocked a user in oracle and trying to "Account is locked out" displaying messages of connection.

  But I am able user from other users query tables. How do I block it?

  For example:

  I had blocked a user User1. When I logged in a user named USER2 and when I call SELECT * FROM USER1. Table_name, displays the data.

  I need to block this question from other USERS.

  Help, please

  Thanks in advance...

  Account lockout does not prevent others to get access on user objects. The only change is that the user won't be able to connect more.

  To block others access to objects of this scheme can be done by defining the privileges of law for other users, or with the vault of the database by creating a Kingdom

  around this blocked scheme (DV requires an additional license).

• Why ORACLE HOME USER 12.1.0.2 LIMITED to SINGLE INSTANCE?

  Thank you for taking my question!

  
  I installed my first database 11g to 12.1.0.2 under windows (no cars).  I need help understanding new ORACLE HOME of the USER to affect my c 12 databases.

  
  The documentation below States "when YES creates the account of USER ORACLE HOME it can only be used by a database unique instance".  I don't understand why I can't add another instance and use the same YES program created the USER account to the HOME of ORACLE page?  Why choice is (1) differs from the number of choices (2) given that both can be local accounts?   In addition, if you are unable to sign the USER ORACLE HOME, how that affects the OEM or OEM agent running on the database target?

  Thank you!

  Kathie

  When installing YES offers three options to associate a user Oracle Home of the Oracle home:

  1. leave YES create a new user account to do as a user in the Oracle home page.
  This option of the newly created user has the rights to connect to the server.
  This can only be used for Single Instance databases.

  
  2. Select an existing local or a domain as account being the user Oracle Home.
  If the existing account has login privileges, then Oracle Home user will have login rights to the server.
  This must be a nonadministrator user.

  
  3. Select a built-in account as the user Oracle Home.
  In this local Service option / built-in account Local system will become user Oracle Home.

  So if you do not use CARS, so it's no problem. The documentation seems to say that Option 1 cannot be used with CARS, not Option 1 cannot be used with multiple instances.