Why Windows Movie Maker publish not my film with a weird color distortion?
I had this problem for a while. I have updated my graphics card and uncontrolled filters ending with that, though, is to always have this problem.
Hello Sunyboy54,
The link below the list out of the free versions of many different Codec Plugins. Please let us know status. Thank you!
http://www.WMPlugins.com/ITEMLIST.aspx?typeid=8 Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
Why Windows Movie Maker does not accept 320 bitrate songs?
When he tries to import the mp3 bitrate 320 song he says "cannot be imported. Not enough memory is available to complete this operation. "But all other files under 320 bitrate will import correctly. Thanks for help.
Hello
See this article on the movie settings in Windows Movie Maker and check if that helps.
Create movie customized for Windows Movie Maker settings
-
Windows Movie Maker is not publish a 10 minute film.
It is not a long film, it is only ten minutes long. There are MOV and MPG files. I tried a DVD publishing and that no longer works. It still load to a certain percentage, but then it just stops. What should I do?
original title: my movie on Windows Movie Maker is not published.Hello
My friend John Papa - MVP - is the expert on Windows Movie Maker.
PapaJohn.org
http://Papajohn.org/PapaJohn - online tutorials
http://www.Papajohn.org/mm2-online-tutorials.htmlWindows Movie Maker Tutorials - see the menu on the left and others on the main screen.
http://www.windowsmoviemakers.NET/tutorials/Windows Live Movie Maker help & how-to and Forums are good sources of information:
Windows Live Movie Maker that works in Vista and Windows 7
http://Windows.Microsoft.com/en-us/Windows-Live/Essentials-Help-Center?T1=T3Official Support of responses - Movie Maker Forums site-
http://answers.Microsoft.com/en-us/windowslive/Forum/MovieMaker?tab=no====================
These might help:
Getting started with Windows Movie Maker
Import video, photos and audio on Windows Movie Maker
Get a movie in Windows Movie Maker
Make a movie quickly in Windows Movie Maker (AutoMovie)
Publish a movie in Windows Movie Maker
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Why not a movie made Windows Movie Maker - do NOT play on some DVD players? What can I do for the DVD player to allow the DVD to play?
Hello
See this link:
-
in windows movie maker, I made a film, but the disc will not play music of any other disk, in the past, I did what I do
Hi Authorsz18,
You are able to hear the music in the preview?
Try to adjust the volume of an audio clip in the audio / music. And add music from the disc hard if you added songs to a DVD.
1. right click on the audio clip > volume
2 adjust the volume with the cursor.http://Windows.Microsoft.com/en-us/Windows-Vista/add-music-to-your-movie
Bindu S - Microsoft Support
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
OP: Window Movie Maker will not import an mp3 file. Why?
I tried to imort a song from my music file which is in mp3 format, but the program won't. She won't tell me why, it just says: "C: {file location} .mp3 cannot be imported." I imported 2 other songs that are the same exact format. Why is it cant import the file?
Hello spardigus,
1 - is the full error you get when you try to import the file?
Some of the Mp3 files can be compressed in various formats. I suggest that you search information below and check out them if you are able to import the files.
It might be possible that the file may be corrupted and is not readable by Movie Maker. I suggest that you copy the file to a different location on your computer and you are trying to import.
Also check the size of the file. If it shows 0 bytes, there are good chances that the file may be damaged.
I suggest that you try to convert this file to avi format using an Audio Converter. There are several converters which helps you convert the file in the required format. Convert the file and try to import.
You can use your favorite search engine to find the program that will help convert the files.
DISCLAIMER OF THIRD PARTY SOFTWARE:
Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
Thank you
Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think. -
Change display Windows Movie Maker publish
When I publish in Windows Movie Maker, the projects dialog box too big for my screen. So I can't click on the buttons at the bottom.
Hello
Try to follow the steps proposed by Srinivas (September-01-2010) of the thread below, that help you solve the problem.
Hope this information is useful.
-
film on windows Movie maker is not compatible with windows live movie maker
My sister made me a video with Windows Movie Maker and I have Windows Live Movie Maker, and he says that is not fully compatible. Please help, his computer crashed and there is a video of my twin nephews has done for me. There are currently on a USB key. I'll do something to make it work. It was during the last two years of their lives with me and I live 16 hours away from them. Any suggestions would be greatly appreciated.
Thank you
Mary
Thank you for your response. I have Windows 7 and I have windows live Director 2011. When I plug in the USB, it says that the file ext is MSWMM
Any information you have would be so appreciated. Thank you very much
Mary
=========================================
. MSWMM is not a video file... it's a project file
Movie Maker XP or Vista Movie Maker 6. It is more useful
for a re-release in Movie Maker on the system, it was created
sure if you have copies of all the original source files...
(Photos, video Clips, Audio Clips)...Ask your sister to save the project in the. Film WMV
format, then send the. WMV file to you. You could
who discovered in Windows Media Player.Here is some info on the savings that can be useful to your sister:
XP Windows Movie Maker 2.1...
To save in a .wmv movie file...
Type of... CTRL + P (or go to...) File / save movie file)
to open the wizard movie recording.
Choose... My computer.
Next /.
Enter a name and a location.
Next /.
ICT... "Best quality for my computer.
Next /.
Wait while the movie is saved.
Finishing...Windows VIsta Movie Maker 6...
The following article offers information on editing
(save) in a film format that will play in
Windows Media Player and can be shared.Windows Vista - publish a movie in Windows Movie Maker
http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker -
Windows Movie Maker will not publish my movie on my computer
I tried to post this video to my computer from Windows Movie Maker. The video is long, only 42 seconds, so I doubt that there is a problem of length.
When I try to publish the video, a dialog box appears and says "Windows Movie Maker cannot publish the movie to the specified location. Verify that the original source files used in your movie are still available, that the publishing location is still available, that there is enough available disk space, and then try again. »
I've checked everything and nothing seems wrong or irrelevant. I had to completely wipe my computer about two days due to the 'Blue screen of death' experience, but I was able to install any new drivers and restore my computer to its factory settings. I don't know what to do. Help, please!
More than likely you are using one or more sources
files that are not completely compatible with Movie maker.Several formats are apparently compatible with film
Machine, but the most reliable choices are:Photos - bmp
Video - wmv or dv - avi
Audio - wav, wma, wmvSee also the following links:
Windows Movie Maker error cannot complete the Save Movie Wizard
http://moviemakererror.blogspot.com/ Movie Maker - problem resolution - "cannot record a movie.
http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.htmlThere are many programs that can do conversions...
The following freeware is an example...:(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Format Factory
http://www.videohelp.com/tools/Format_Factory
(the 'direct link' is faster)
(the file you want to download is: > FFSetup260.zip<>
(FWIW... installation..., you can uncheck
('all' boxes on the last screen)First, you will need to decompress the file or just open the
Drag FFSetup260.exe out of the folder
and drop it on your desktop. To install left click.Next, after the download and installation of Format
Factory... you can open the program and
left click on the toolbar, the "Option" button and
"Select an output folder to" / apply / OK.
(this is where you find your files after they)
are converted)Drag and drop your video clips on the main screen...
Select "all to WMV" / OK...
Click on... Beginning... in the toolbar...
That should do it...
Good luck...
-
Windows Movie Maker will not publish my videos properly!
Hey guys. anyway I publish a video Director and 15 Minute long play through it fine, but after its publication, and I watch the video file it freezes at the same image (the media player does not freeze, he continues to play through, the video comes out badly) and all the audio stops and then the screen blacks on entirely for the rest of the video. Does anyone have a solution to this? I'd appreciate any help. Thank you
Hi, Mike Vargas27,.
(1) did you try to post another file to check if the problem is with this particular file or to do it with Windows Movie Maker?(2) what is the format of the file, which you try to publish a movie?(3) remember you to make changes to the computer before the question?Refer to the below mentioned method and check if it helps.Movie Maker 2 stops responding when you try to save a large movie fileSolve problems with publishing a movie to your computerNote: The link above also applies to Windows XP.For reference:Formats supported by Windows Movie Maker in Windows XP fileFIX: Windows Movie Maker crashes when you install more than 100 video transitions or video effects on a computer that is running Windows XPHope this information helps. -
Whenever I try to edit anything to move a clip to the evolution of the duration of a song the Windows movie maker stops working or "restarts". Even adding transistions and effects causes this. Why?
Hello
1. don't you make changes to the computer until the problem occurred?
I suggest you to try the steps below and check if it helps.
Method 1:
Set up your computer in a clean boot state, and check to see if the same problem happens.
By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
Method 2:
Error message when you try to start Windows Movie Maker in Windows Vista: "Movie Maker has stopped working" http://support.microsoft.com/kb/923122
Hope this information is useful.
-
My Windows Movie Maker will not publish my video! Help!
Whenever I try and publish my video, about 19% through, it will say "Windows Movie Maker cannot save the movie to the specified location. "Verify that the original source files used in your movie are still available, that the backup location is still available, and that there is enough available disk space and then try again .
I tried everything that I could find-unchecking filters, reset, settings, shorten, taking the effects, transitions, and even download free audio and put it back later. Please help , I spent all day on this video.
It is 4 minutes and 18,62 megabytes.
Thanks for your help, but they are already all WMV format.
====================================
Still may be worth a try... convert wmv WMV.
This will create a new version of the file that would work. Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *. -
Windows Movie Maker will not publish my movie - gets 6% & goes no further
I recorded a movie and brought it into Windows Movie Maker without problems. Then I edited the film (not to add anything or only pruned and spliced). Now, I want to save the movie as a movie. However when I do it, he won't get to 6% and then if freezes. It won't convert everything yet, I even left it at night to convert (made sure my computer has not turned off the coast) and he did not always get from 6 percent. Is there another way to change to the film of a project that I can run on a computer as a movie? Or do you have a solution to get movie maker to work? -Thank you
I have exactly the same problem. I imported the file as a wmv file, originally created by Gotowebinar. I was able to edit and cut the file, but when I try to record on my computer, sometimes at 1% ^ and freezes. I've updated all my drivers and still no improvement. I use WMM 2.6, so there must be another problem of compatibility.
=============================================
What kind of editing you did and you have not added a music file?
If_Yes_what was the format?Before you save it... try to go to... Tools / Options / Compatibility tab
and uncheck the box 'All' filters / OK... then try to save. If it still fails...
try to save in the. DV - AVI format.To save a DV - AVI movie file...
Type of... CTRL + P (or go to...) File / save movie file)
to open the wizard movie recording.
Choose... My computer.
Next /.
Enter a name and a location.
Next /.
Show more choices.
Other parameters.
Open the window of the droplet and choose... DV - AVI.
Next /.
Wait while the movie is saved.
Finishing...---
FWIW... There is a compatible version Windows 7 Vista film
Machine 6 you might have better results with:(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Install Windows Movie Maker 6.0 on Windows Vista 7
-
Just 3 days ago my Windows Movie Maker worked and then I downloaded windows movie maker2.6 and it worked always, but I uninstalled version 2.6 and Windows now shows my pictures but not my video just sound and no picture! what the hell is happening? can I re-download the 2.6 movie maker?
Duplicate the content of the Post-
After 3 days of movie maker works correctly, now its does not work and all I get is sound and no picture for my videos from my digital camera and beautiful days ago! going on what?
listen to about 3 days to a week ago my Windows movie maker worked very well, I upgraded my adobe flash player and windows movie maker has always worked correctly and now all of a suddden it does not work and it will only display the image and no video and it's the same thing with the media player, and digital photos from my camera are all ive used , there was never a problem and now all of a sudden thers a problem! is the problem with microsoft, because I know it isn't my camera and not on my computer! I have I have not changed anything ive summer since I started using Windows Movie Maker! my email is * address email is removed from the privacy * if you answered my question. Thanks.i required a response as soon as possible thank you.Just 3 days ago my Windows Movie Maker worked and then I downloaded windows movie maker2.6 and it worked always, but I uninstalled version 2.6 and Windows now shows my pictures but not my video just sound and no picture! what the hell is happening? can I re-download the 2.6 movie maker?
==================================
Might be interesting to try to do a restore of the system at a time
before the installation of 2.6.-Features - Windows 7 system restore
http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restoreIf you want a Movie Maker that has a scenario... it
is a downloadable version of Vista Movie Maker 6:(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Vista Windows Movie Maker Installer for Windows 7
http://noeld.com/programs.asp?cat=video#wmminst -
A film recorded in windows movie maker opens not when-e-by post
My other movies a year ago, opened when they were sent, no problem. So I sent one that makes home and you could open when sent by electronic mail and got the same mess... The project file is in use by another program. I can't figure this out for nothing! All movies are in Linda/documents and recorded in Movie Maker
What is happening with all the movies attached sent by e-mail (I know that's the same films that worked before) or only those sent to a certain person? Try to send one to yourself and see if you can open and view. If so, it may be a problem with the recipient. Make sure that they close all the open files or active in their program, and then try again.
If this does not work, please transfer your question in the Forum Movie Maker:http://social.answers.microsoft.com/Forums/en-US/wlmedia/threads where experts in this program will be happy to help you with your problem.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Maybe you are looking for
-
The field 'description' in iPhoto?
In iPhoto, there is a text field, 'Description '. A lot of my photographs are documents I use the Description field to transcribe the text. With a previous update the contents of this field that is not automatically reported, but the values could be
-
Before I turned off my computer, I stopped all my open applications. This makes startup cleaner. But now, at the start, Firefox 23 automatically... not open Safari, no email, just new Firefox 23. This seems to be the new default. I can't stop this be
-
HP g62: HP G62 system disabled key: 99555936
My son entered a BIOS password, but I am unable to use the laptop because of the restriction password in the post. Can someone please? Thank you. Key: 99555936
-
Satellite Pro L300 - white screen after login
Hi, got a laptop off a friend to watch as not start correctly. Vista Edition running Home Premium, it will start up the screen of the user ok but when a user is selected the screen goes white with just the mouse pointer showing (which moves ok on the
-
Satellite A100 - battery rest led lit Orange
Hello The battery rest light color Orange/orange and the battery symbol on my task bar constantly States ' 87% available (plugged in, load). I'm connected. If I remove the card, the computer is de-energized immediately. I tried a new original Toshiba