Automatic control of the file Backup Log alert

Similar Questions

• DVD how much we need for the files backup with backup and restore program?

  Hello how are you?
  DVD how much we need for the files backup with backup and restore program? Y at - it large differences in the time and space between write backups on DVD and external hard drive?

  I do not understand your question.  Asked how the space has been used on your C: drive and you answered 60 GB.  Now you say your PARTITION C: is 60 GB with only 20 GB used?  I really don't understand what you're so confused.  It's simple arithmetic grade 3rd.  What is space you USED on the C: drive, that multiply by 0.7 to obtain the amount of space will be used on your backup disk after compression.  Divide this number by 4.7 and round.  That's how many DVDs you'll need if you insist on the use of DVDs for backup.  Then

  (1) If you are using 60 GB, the answer is (60 x.7) / 4.7 = 8.936.  I rounded up to 9 and added 1 just to be sure.

  (2) If you use only 20 GB, the answer is (20 x.7) / 4.7 = 2.97 rounded up to 3.  Add 1 and get 4.

  If you use only 20 GB, I am very surprised, because almost any important installation of Windows 7 is going to take more than 20 GB.

  All of this assumes that you do NOT use the Windows backup and restore program, but one that I recommended.  When I used the windows one, the results were several times the space that I used on my C: partition.

  Good luck.

• Warning in the file/var/log/vmkwarning on an ESX Server:

  I ESX3.5 U2 set up with SAN, I get a warning message in the file/var/log/vmkwarning that says the following:

  VMkernel WARNING: Scsi id: 550: supports ANSI version ' SCSI-2' (0x2).» Be used with ESX a device must support the SCSI 3 Protocol.

  Should I be concerned and action?

  see this KB article

  http://KB.VMware.com/kb/1005885

  .. .and U4 seems to solve a difficulty

  http://KB.VMware.com/kb/1007971

• How to check in the metadata without control in the files

  I want to only check in certain metadata for research purposes.
  What should I do to enable DCU to do without control in the files?
  
  Thank you

  Yes, but in the right place is
  [url http://blogs.oracle.com/kyle/2010/10/check-ins_without_files_ucm.html] this one :)

  Points for stellentpmp

• No Version control under the file Menu command

  Version of program:  Adobe RoboHelp 8.0.2 / RoboSource Control 3.1

  Hello!

  I am very experienced with authoring in RoboHelp, but I'm trying to implement the version control for the first time and documentation (PDF version of the manual using Adobe RoboHelp 8, page 29, point 2) says "Choose file > Version Control > add to Version Control.

  I have not found a Version control on the file menu point, even if the menu was fully deployed.

  I found a toolbar icon that seemed to link to the command.

  It is not a big deal, because I could find the icon, but I have other problems with version control (which I will address in a separate post), and I wonder if there is something wrong with my software.  Everyone has the "Version Control" command in the file menu?

  Thank you!

  Andreah

  Hello

  Sometimes it takes to reset a menu. To do this, right click on your menu bar and choose Customize. This should be the tab toolbars at the front. If this is not the case, click it. Then make sure the highlight is on the menu bar. Click on the reset button. Dismiss all dialogs. It shows then?

  Here again, the Source code control is not my cup of witchcraft and I do not use it. So, I've never had a reason to pick up the order. Maybe it's just missing and the docs are wrong.

  See you soon... Rick

  Useful and practical links

  Wish to RoboHelp form/Bug report form

  Begin to learn RoboHelp HTML 7 or 8 days - $24.95!

  Adobe Certified RoboHelp HTML Training

  SorcerStone blog

  RoboHelp EBooks

• ORA-00205: error in the identification of control files, see log alerts for more information

  Hello

  I'm putting it on oracle 11.2.0.1 to 11.2.0.3 DB level but during DBUA, I got error

  "ORA-00205: error in the identification of control files, check the log of alerts for more information.

  
  

  I have check the alerts log in E:\app\kmahalingam\diag\rdbms\orcl\orcl\trace\alert_orcl.txt

  Starting ORACLE instance (normal)

  LICENSE_MAX_SESSION = 0

  LICENSE_SESSIONS_WARNING = 0

  SNA system picked latch-free 3

  With the help of LOG_ARCHIVE_DEST_1 parameter value by default as USE_DB_RECOVERY_FILE_DEST

  Autotune undo retention is enabled.

  IMODE = BR

  ILAT = 51

  LICENSE_MAX_USERS = 0

  SYS audit is disabled

  Commissioning:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  With the options of partitioning, OLAP, Data Mining and Real Application Testing.

  Windows NT Version V6.1 Service Pack 1

  UC: 8 - type 8664, 8 physical cores

  Process affinity: 0 x 0 x 0000000000000000

  Memory (success/Total): Ph: 3241 M / 16383 M, Ph + FCP: 16565 M / 32765 M

  Using parameters in spfile E:\APP\KMAHALINGAM\PRODUCT\11.2.0\DBHOME_2\DATABASE\SPFILEORCL server-side. ORA

  Parameters of the system with default values:

  process = 300

  sessions = 472

  memory_target = 3280M

  control_files = 'E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL01. CTL.

  control_files = 'E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\CONTROL02. CTL.

  DB_BLOCK_SIZE = 8192

  compatible = "11.2.0.0.0."

  db_recovery_file_dest = 'E:\app\kmahalingam\flash_recovery_area. '

  db_recovery_file_dest_size = 3912M

  undo_tablespace = 'UNDOTBS1.

  Remote_login_passwordfile = "EXCLUSIVE."

  db_domain = "cpg.com."

  dispatchers = "(PROTOCOL=TCP) (SERVICE = orclXDB)" "

  audit_file_dest = "E:\APP\KMAHALINGAM\ADMIN\ORCL\ADUMP".

  AUDIT_TRAIL = 'NONE '.

  db_name = "orcl".

  open_cursors = 300

  star_transformation_enabled = 'TRUE '.

  diagnostic_dest = "E:\APP\KMAHALINGAM".

  Fri Mar 07 00:33:15 2014

  PMON started with pid = 2, OS id = 25072

  Fri Mar 07 00:33:15 2014

  PSP0 started with pid = 3, OS id = 25688

  Fri Mar 07 00:33:16 2014

  VKTM started with pid = 4, OS id = 27608 high priority

  VKTM clocked at (10) precision of milliseconds with DBRM quantum (100) ms

  Fri Mar 07 00:33:16 2014

  GEN0 started with pid = 5, OS id = 11484

  Fri Mar 07 00:33:16 2014

  DIAG started with pid = 6, OS id = 16980

  Fri Mar 07 00:33:16 2014

  DBRM started with pid = 7, OS id = 2200

  Fri Mar 07 00:33:16 2014

  DIA0 started with pid = 8, OS id = 8024

  Fri Mar 07 00:33:16 2014

  MA started with pid = 9, OS id = 15688

  Fri Mar 07 00:33:16 2014

  DBW0 started with pid = 10, OS id = 19908

  Fri Mar 07 00:33:16 2014

  LGWR started with pid = 11, OS id = 22616

  Fri Mar 07 00:33:16 2014

  CKPT started with pid = 12, OS id = 12828

  Fri Mar 07 00:33:16 2014

  SMON started with pid = 13, OS id = 10184

  Fri Mar 07 00:33:16 2014

  RECCE has started with pid = 14, OS id = 28984

  Fri Mar 07 00:33:16 2014

  MMON started with pid = 15, OS id = 22288

  Fri Mar 07 00:33:16 2014

  MMNL started with pid = 16, OS id = 12072

  commissioning 1 dispatcher (s) for '(ADDRESS =(PARTIAL=YES) (PROTOCOL = TCP))' network address...

  commissioning or shared server 1...

  Environment ORACLE_BASE = E:\app\kmahalingam

  Fri Mar 07 00:33:16 2014

  ALTER DATABASE MOUNT

  ORA-00210: could not open the specified control file

  ORA-00202: control file: ' E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\CONTROL02. CTL'

  ORA-27041: could not open the file

  04002 - OSD: could not open the file

  S/O-error: (OS 2) the system cannot find the file specified.

  ORA-00210: could not open the specified control file

  ORA-00202: control file: ' E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL01. CTL'

  ORA-27041: could not open the file

  04002 - OSD: could not open the file

  S/O-error: (OS 2) the system cannot find the file specified.

  ORA - 205 marked during: ALTER DATABASE MOUNT...

  Fri Mar 07 00:34:46 2014

  ALTER DATABASE MOUNT

  Fri Mar 07 00:34:46 2014

  ORA-00210: could not open the specified control file

  ORA-00202: control file: ' E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\CONTROL02. CTL'

  ORA-27041: could not open the file

  04002 - OSD: could not open the file

  S/O-error: (OS 2) the system cannot find the file specified.

  ORA-00210: could not open the specified control file

  ORA-00202: control file: ' E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL01. CTL'

  ORA-27041: could not open the file

  04002 - OSD: could not open the file

  S/O-error: (OS 2) the system cannot find the file specified.

  ORA - 205 marked during: ALTER DATABASE MOUNT...

  Fri Mar 07 00:45:51 2014

  change the database editing

  Fri Mar 07 00:45:51 2014

  ORA-00210: could not open the specified control file

  ORA-00202: control file: ' E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\CONTROL02. CTL'

  ORA-27041: could not open the file

  04002 - OSD: could not open the file

  S/O-error: (OS 2) the system cannot find the file specified.

  ORA-00210: could not open the specified control file

  ORA-00202: control file: ' E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL01. CTL'

  ORA-27041: could not open the file

  04002 - OSD: could not open the file

  S/O-error: (OS 2) the system cannot find the file specified.

  ORA - 205 scored at the course: change the editing of the database...

  Fri Mar 07 00:48:13 2014

  change the database editing

  Fri Mar 07 00:48:13 2014

  ORA-00210: could not open the specified control file

  ORA-00202: control file: ' E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\CONTROL02. CTL'

  ORA-27041: could not open the file

  04002 - OSD: could not open the file

  S/O-error: (OS 2) the system cannot find the file specified.

  ORA-00210: could not open the specified control file

  ORA-00202: control file: ' E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL01. CTL'

  ORA-27041: could not open the file

  04002 - OSD: could not open the file

  S/O-error: (OS 2) the system cannot find the file specified.

  ORA - 205 scored at the course: change the editing of the database...

  Fri Mar 07 00:52:34 2014

  Derives from detected time. Check the file path VKTM for more details.

  Fri Mar 07 00:53:46 2014

  Closure of proceedings (immediate)

  Closure of proceedings: in addition to logons disabled

  Stop background MMNL process

  MMON background process stop

  The high waters = 1 license

  All dispatchers/dispatchers and shared servers stop

  ALTER DATABASE CLOSE NORMAL

  ORA-1507 marked during: ALTER DATABASE CLOSE NORMAL...

  ARCH: Disabled archives due to the stop: 1089

  Stop process to archive

  Archiving is disabled

  ARCH: Disabled archives due to the stop: 1089

  Stop process to archive

  Archiving is disabled

  Fri Mar 07 00:53:49 2014

  Stop background VKTM process

  Fri Mar 07 00:53:51 2014

  Instance shutdown complete

  Fri Mar 07 00:54:01, 2014

  Setting the default value of the parameter parallel_max_servers

  320 to 285 because of the value of the process parameters (300)

  Help, please

  Thank you

  According to spfile.

  control_files = 'E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL01. CTL.

  control_files = 'E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\CONTROL02. CTL.

  You mentioned

  Davinapochon wrote:

  E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL02. CTL file is there but there is no CONTROL01. CTL file.

  So little confused here.

  E:\APP\KMAHALINGAM\ORADATA\ORCL\--> must contain CONTROL01. CTL

  E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\--> must contain CONTROL02. CTL

  What is it now?

  Anand

• automatic generation of the files using the time and date system

  Hi guys,.

  IAM trying to build a path for the creation of files automatically using system date and time. I'm running into errors with regard to the special characters in the file name. I'm trying to parse the string to get the date and time without the ' / 'and':' but have failed. is there a better way to do it? Help, please! I try to avoid a dialog box for the user to enter a file name.

  Thank you!

  V

  Here's a little experiment... may help build the %d (day) (month) of %m %(year) type stuff.

• only the file name link alert

  A selected object

  I would like to alert the name

  not the file extension

  var mySel = app.activeDocument.selection;
  alert (mySel.link.name);
  

  Alert: Flower.eps (it is not)

  Alert: Flower (I want)

  OK, the problem is to deal with selection on the top shows the name of the link without extension. Try this:

  mySel = app.selection[0];
  alert (mySel.graphics[0].itemLink.name.replace(/(.+)(\..+)$/, '$1'));
  

  Peter

• Automatic processing of the files in the folder

  Is it possible to use the ODI to automatically process a csv file, immediately it will be deposited in a folder without the user clicking anything?

  Hello

  WaitForData works with mask (IE *.csv). For example

  Expect that the sale of 5 minutes *.dat files every second in the c:\sales_in directory, then copy those files in the C:\sales_ok directory. Not crush.

  OdiFileWait-ACTION = COPY - DIR = c:\sales_in-PATTERN = * .dat - TODIR = c:\sales_ok - FILECOUNT = 0 - TIMEOUT = 350000 - POLLINT = 1000 - CRUSH = no

  I copied the wrong link in the previous thread. The correct is

  http://gerardnico.com/doc/ODI/Webhelp/en/ref_tools/snpsfilewait.html

• SOUL CC 2014 (last year) when I import a file, the last game before I used is automatically applied to the file

  And I can't seem to find a way to stop this behavior.

  If I order click on the preset below the file in the queue pane and select delete, it deletes the preset and the queue file.

  Any help appreciated.

  Thank you

  MtD

  A preset will always apply at the same time you import a source. If the preset is not one you like, you can choose a new one drop-down Format/Preset menus or you can drag a new preset browser predefined on top of the existing. If you drag a new preset to the source rather than the existing preset, it will create a second output.

• switch after the hot backup log file

  Hello world
  Why should we change log file after the end of the backup command that is to say, after the end of the backup hot?
  Why we should take a backup control files to database level, but not through operating system level that is to say, order cp?

  Why we should take a backup control files to database level, but not through operating system level that is to say, order cp?

  If you're doing a cold backup, this is where you use cp.

  But when the database is in place, controlfile is used and it is continuing to change the oracle process. Now the question is how to get the consistent image of the controlfile, here's where you their support at the database level (for example backup controlfile). When you do that level database, a snapshot file is created time and she is saved.

  HTH

• Automatic control of the channel select

  I have a text input box that is displayed to the user for the information to be included - this will be done via a bar code reader, but it does not work because to enter in the text (bar code), a user must select the channel control unit where the text should be enter - so my question is how can I automatically select the text entery box , press the tab key also works so is it possible to send the command {tab} in VI?

  Thank you

  If your question is how to give attention to your control, the solution is a proprity (right-click on your control > create > property node > Keyfocus).

  CDT

• Error - can open the file install.log, unable to remove some programs.

  Original title: can not open install.log file.

  I am trying to clean my computer, because it is really slow. I tried to remove some programs and I keep getting this message, "could not open install.log file". Is anyway to fix this?

  Hi njfay,

  The programs that you are trying to uninstall?

  You can run the disk cleanup tool and check if the problem persists.

  Description of the tool in Windows XP disk cleanup

  Reference: optimize the performance of your computer

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Using the file backup 101

  I have never used files back to the top... just try to get a few suggestions and advice on the best way and the easiest way. CD RW how will I need to start? Will I continue to use the same CD - RW over and over or willl I have many different dates? Any help I can get will be greatly apreciated
  Thank you

  I have never used files back to the top... just try to get a few suggestions and advice on the best way and the easiest way. CD RW how will I need to start? Will I continue to use the same CD - RW over and over or willl I have many different dates? Any help I can get will be greatly apreciated
  Thank you

  The easiest way is to use the built-in backup and Restore Center. Here are two tutorials: http://www.vista4beginners.com/How-to-backup-your-data, http://www.ehow.com/how_2058419_backup-files-windows-vista.html. As for the number of CDs you need, depends on how many files you have. I would recommend DVD if possible because they are less expensive for the amount of storage they provide.
  You will be able to reuse the disc until it is full.

• system continue to write to 'windows.edb' and the file 'MSstmp.log '.

  I use Windows 7. The system who writes on hard disk, and through resource monitor, I see that the disk activity is mainly caused by the Service of Index and files that have been written is 'Windows.edb' and 'MSStmp.log' or 'MSS.log', at the speed average 3 MB/s.

  I went in Indexing Options and choose only very few directories, but the system keeps still write to these files above after a few weeks!

  Original title: search search index indexing re-indexing re-index research research research service troubleshooting troubleshooting

  Hi Feipeng,

  You can try to execute the resolution of the problems Windows Search and indexing and check if it helps.

  Open the troubleshooter for search and indexing