Automatic device for DJ volume - what is it called?

Similar Questions

• Toshiba value added logical and device for general use - what is it?

  Hello

  I completely put in place a new system on the Tecra S2, Win XP and everything. All the drivers from the site Web of Toshiba helped but now only a single 'questionmark' remains in the hardware Manager:

  Toshiba added value to general use and logical device

  I cannot find a driver anywhere or so for that. What is it indeed?
  The laptop works fine, no problem.

  Greetings,
  Ben

  I think it is (among other things) an ACPI driver...
  and you can download it-I remember...
  don't forget the 'value added package' and 'common modules' to install

• somehow I have scratched my order of device driver / & audio volume from my hard drive and now I have no sound. What have I done?

  somehow I have scratched my order of device driver / & audio volume from my hard drive and now I have no sound. What have I done?

  Fujitsu lifebook

  Hello

  Thank you for writing to Microsoft Communities.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1. What is the exact model of your computer?

  2. what exactly happens when you try to play sounds on the computer?

  If you are not able to hear sound on the computer, then I suggest you to try the steps mentioned in the link and check if this may help.

  No sound in Windows: http://windows.microsoft.com/en-US/windows/no-sound-help#no-sound=windows-xp&v1h=win8tab2&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Select the appropriate model and try to install the sound drivers from here: http://www.fujitsu-pc-asia.com/driversupport/selectioninterface/selection.html

  Please follow these recommended steps and post if you still experience the problem.

• Need to disable CGI, I have two-factor authentication, but I don't have the phone number or device with me. What can I do?

  Need to disable CGI, I have two-factor authentication, but I don't have the phone number or device with me. What can I do?

  For Apple ID - Apple Support two-factor authentication

  If I can not connect, how I again to access my account?

  If you can't sign in, reset your password, or receive verification codes, you can account recovery application to restore access to your account. Account recovery is an automatic process designed to help you back into your account as soon as possible while denying access to anyone who might be impersonating you. It may take a few days - or more - depending on the specific account information, you provide to verify your identity.

  It will be your option. If you try to find an iPhone with locking Activation that you don't remember the password, you can remove the account from the iPhone with the help of Apple's Support with the receipt of the initial purchase of the iPhone as a way to prove that you are the real owner of this iPhone.

• How can I get automatic updates for windows xp drivers easily?

  How can I get automatic updates for windows xp drivers easily & no frills?   in the same easy way for windows 7

  Thank you, appreciate it.

  Hi Abdellah,

  1. what happens when you try to perform automatic updates?

  2. were you able to perform before automatic updates without any problems?

  Method 1:

  You can read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  Method 2:

  You can also visit the computer manufacturer and try to update the latest version of the drivers for all devices.

  How to manage devices in Windows XP

  Also refer to the following article to improve the performance of the system.

  Slow PC? Optimize your computer for peak performance

• vSphere - KS.cfg: line31: virtualdisk size is too large for vmfs volume

  Can someone tell me what the problem with my script KS.cfg? It contains the following information, but I get an error stating "...". line 31: virtualdisk size is too large for vmfs volume (needed size 27176 MB > size available 26184MB)... »

  He complains, I increase the size of what he said and then, he complained again and again and again and again each time...

  • BEGINNING of KS.cfg *.

  AcceptEULA

  keyboard us

  AUTH - enablemd5 - enableshadow

  bootloader - location = mbr

  clearpart - overwritevmfs - firstdisk

  1. Uncomment the esxlocation line and comment out the clearpart

  2. and physical partitions to do a non-destructive reinstall.

  #esxlocation - uuid = 41cff7dd-4dd9-400D-a262-9ebb06565cc9

  install the cdrom

  rootpw - iscrypted bonnefin

  time zone "America/Vancouver".

  network - addvmportgroup = true - device = vmnic0 - bootproto = dhcp

  part "/ boot" - fstype = ext3 - size = 1100 - onfirstdisk - asprimary

  the part 'none' - fstype = vmkcore - size = 110 - onfirstdisk

  part "Storage1" - fstype = vmfs3 - size = 26184 - grow - onfirstdisk

  VirtualDisk "esxconsole" - size = 26176 - onvmfs = 'Storage1.

  part 'swap' - fstype = swap - size = 1600 - onvirtualdisk = "esxconsole" - asprimary

  the part "/ var/log" - fstype = ext3 - size = 4096 - onvirtualdisk = "esxconsole".

  part ' / var' - fstype = ext3 - size = 4096 - onvirtualdisk = "esxconsole".

  a part "/ home" - fstype = ext3 - size = 2048 - onvirtualdisk = "esxconsole".

  part ' / tmp' - fstype = ext3 - size = 2048 - onvirtualdisk = "esxconsole".

  part "/ opt" - fstype = ext3 - size = 2048 - onvirtualdisk = "esxconsole".

  part ' / ' - fstype = ext3 - size = 10240 - push - onvirtualdisk = "esxconsole" - asprimary

  % post - interpreter = bash

  • END of KS.cfg *.

  VMFS needed his own space for metadata, and you have not left a lot to her (26184-26176 = 8 MB).  You need a minimum of about 500 MB - is better around a gig or 2.

  -Matt

  VCP, vExpert, Unix Geek

• Error E0BB0147: the "Volume Snap" operation is not currently enabled for this Volume

  Hello!

  Since an update of my Windows XP at the end of 2011, I have problems on my HD using Ghost 14.0 backup. I get the following error message:

  -Impossible to create an image of the selected disk virtual volume.

  -E0BB0147 error: "Volume Snap" operation is not currently enabled for this Volume.

  What should I do to fix this?

  Thanking in advance for your help,.

  tico776

  Hello

  I suggest you to see link and check if it helps:

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, see the link:

  Back up the registry

  http://support.Microsoft.com/kb/322756

   

  Error: "error E0BB0147: the 'Snap Volume' operation is not currently enabled for this Volume" when creating a backup using Norton Ghost 14.0

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?LG=English&CT=United+States&docid=20080929121249EN&product=home&version=1&PVID=f-home

• I use a USB device for the first time. My computer windows Xp does not recognize. How can I fix this prob, and where can I get the info to fix it?

  When I insert my USB for the first time, it is said that it has malfunctioned, and windows does not recognize it. Am I missing driver for USB or what? I need step by step instructions on how to fix this prob. I'm an amateur. Thank you.

  I need step by step instructions on how to fix this prob. I'm an amateur. Thank you.

  Step 1.  Identify the make and model of the USB device.
  Step 2: Identify the version of Windows XP you have, including service pack (start > run > winver > OK)

  Although the following steps 1 & 2 you could get extra help, I suspect that the 'USB device' has indeed "defective" and you have to go back to where you got it and request a refund or a replacement.

• Driver Installation Failed: Could not find media device for this driver

  I have a HP with Windows Vista (32 bit) dv6646us and have had a problem with the audio device. The sound works sometimes, but above all the system does not even recognize the audio output device (in this case, I see the speaker icon in the taskbar with a cross mark). Another model is that the laptop does not recognize the audio device, but no sound is produced (in this case, the "speaker" icon doesn't have the cross mark). When the system has at least recognize the audio device, I can solve the problem by using the Microsoft Fix it 50131. However, when the system does not recognize the audio device, nothing seems to work. When I go into Device Manager, there is no sound, not just a pilot section. The laptop is supposed to use Conexant High-Definition Audio Driver, but when I try to install it, I get the following message: failure of the driver Installation: Media not found device for this driver.

  In another forum, someone has solved the same problem in a system with the 32-bit version of XP by downgrading his memory from 4 GB to 2 GB, based on his knowledge that a 32-bit system cannot take 4 GB of RAM (it has started having the problem after that first, he upgraded the RAM from 2 GB to 4 GB). However, I don't know if the same applies to my problem because the sound system sometimes works with the current system with 4 GB of RAM and also my laptop is supposed to hold up to 4 GB of RAM (and he does not the 4 GB of RAM). So, I was wondering if there is another possibility for a cause and a solution to this problem.

  Hello

  ·         If it works well before? If so, remember to do recent changes on the computer before this problem?

  ·         Do you think the audio device when there is no X on the volume icon?

  I suggest you follow the steps mentioned below:

  Method 1:

  You can follow this section "By my speakers is crackled or distorted" in the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  Method 2:

  If the previous step fails, uninstall and reinstall the audio drivers completely, follow the steps below:

  a. click Start, type Device Manager in the Start Search box and press ENTER.

  b. click continue. The Device Manager dialog box appears.

  c. If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  d. in r management device, right click on audio and its driver and click on uninstall.

  e. install the last driver audio drivers on the manufacturer's Web site.

  Method 3:

  If the previous step fails, follow the steps described in the following link:

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• My computer installs the automatic updates for Vista Home Premium, but fails to set them up.

  original title: Microsoft updates

  My computer installs the automatic updates for Vista Home Premium, but fails to set them up. I'll through in circles, trying to figure out what the problem is. Everything was fine until a week ago. Help please

  Thanks for trying to help. It was too complicated for me to fix, so to get help in. happy to say now, all right.

• Foglight nms up to 100 devices for free

  Hi all,

  What is the correct procedure for a customer to obtain FoglightNMS for 100 devices for free as advertised on the web? When registering, they get a trial for choice license or license key entry.

  Concerning

  I reached out to the and resolved with Rikard directly about this issue - richard

• Disable alerts for specific volume?

  One of my servers monitored with Foglight SQL has a volume that is only used for TempDB. The size configured for TempDB use about 97% of the storage on the volume. Thus the agent host continuously generates an alert.

  My question is what is the best approach to prevent any warning of this host for that particular volume while impeding is not the agent of database to continue to monitor the TempDB?

  Thank you.

  Hi NewUser

  Please take a look at en.community.dell.com/.../19558825 and en.community.dell.com/.../19558825 that detail how you can use the registry to change alerts for specific volumes.

  Brian

• Development for 8700 c: what to install

  I couldn't understand what to install to develop for 8700 c. As far as I understand it, the device uses sorware v4.1.0.194. It would be sufficient to install JDE v.4.1 and device for 8700 c Simulator? or I need something else?

  Help, please

  To my knowledge, the first component plug-in for Eclipse is 4.3.  I think that Rim were requested to provide 4.2 (of course I asked!), and I hope that it appears, however, I suspect that it is unlikely that 4.1.

  You may upgrade your 8700 - Rim released 4.5 for the 8700.  See the post below for more information:

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=9752#M9752

  I suggest, if you really want to develop for a 4.1 8700, you must use the JDE.  I sometimes develop using JDE and just use the default 7290 Simulator, no matter the device no matter what it will actually end up on.  However I think that one of these articles will tell you how to integrate your 8700 c Simulator in the JDE.

  How - to connect the JDE to a specified set of Simulator
  Article number: DB-00059

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800901/How_To_-_Conne...

  Support - BlackBerry JDE does not recognize previously installed simulators
  Article number: DB-00596

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800792/801083/support...

• BlackBerry Smartphones Application Loader said... way has no software of BB device for the connected device.

  Mine is a new 8320.  I installed the Desktop with Media Manager software.  Seems the 8320 on the CD Office and the online version does not include Media Manager so I installed v 4.2 Service Pack 2, which includes the Media Manager.

  Now cannot transfer music files (I get a memory error output) and when I go to the application manager to check the memory, he can't read my 8320 and I see the message "doesn't have a device for the connected device software."

  How can I add 8320 sotware for the Application Loader device so that it can read my memory allocations 8320, etc.?  What else could be the reason I can't transfer music files?

  First of all, without a press card is impossible to move higher to 2.86 MB files to the device.  If you get a media card you can load any file size to him and you don't even need Media Manager.

  Secondly, you will need to install the software on your PC so that DM will recognize it on the device.  You can get the software from your carrier download site.  Here is a link that should help you:

  http://www.BlackBerryFAQ.com/index.php/BlackBerry_Operating_System_Downloads

• How can I install to get the automatic updates for my drivers on a system Windows 8?

  Original title: hardware device

  How can I install to get the automatic updates for my drivers on a system Windows 8?

  Hello
  Go through the links below, it offers you a complete description of the automatic updates.
  http://Windows.Microsoft.com/en-in/Windows-8/Windows-Update 
  http://Windows.Microsoft.com/en-in/Windows-8/Windows-Update-FAQ