Driver Installation Failed: Could not find media device for this driver

I have a HP with Windows Vista (32 bit) dv6646us and have had a problem with the audio device. The sound works sometimes, but above all the system does not even recognize the audio output device (in this case, I see the speaker icon in the taskbar with a cross mark). Another model is that the laptop does not recognize the audio device, but no sound is produced (in this case, the "speaker" icon doesn't have the cross mark). When the system has at least recognize the audio device, I can solve the problem by using the Microsoft Fix it 50131. However, when the system does not recognize the audio device, nothing seems to work. When I go into Device Manager, there is no sound, not just a pilot section. The laptop is supposed to use Conexant High-Definition Audio Driver, but when I try to install it, I get the following message: failure of the driver Installation: Media not found device for this driver.

In another forum, someone has solved the same problem in a system with the 32-bit version of XP by downgrading his memory from 4 GB to 2 GB, based on his knowledge that a 32-bit system cannot take 4 GB of RAM (it has started having the problem after that first, he upgraded the RAM from 2 GB to 4 GB). However, I don't know if the same applies to my problem because the sound system sometimes works with the current system with 4 GB of RAM and also my laptop is supposed to hold up to 4 GB of RAM (and he does not the 4 GB of RAM). So, I was wondering if there is another possibility for a cause and a solution to this problem.

Hello

·         If it works well before? If so, remember to do recent changes on the computer before this problem?

·         Do you think the audio device when there is no X on the volume icon?

I suggest you follow the steps mentioned below:

Method 1:

You can follow this section "By my speakers is crackled or distorted" in the link below:

http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

Method 2:

If the previous step fails, uninstall and reinstall the audio drivers completely, follow the steps below:

a. click Start, type Device Manager in the Start Search box and press ENTER.

b. click continue. The Device Manager dialog box appears.

c. If you are prompted for an administrator password or a confirmation, type the password, or click continue.

d. in r management device, right click on audio and its driver and click on uninstall.

e. install the last driver audio drivers on the manufacturer's Web site.

Method 3:

If the previous step fails, follow the steps described in the following link:

http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

Tags: Windows

Similar Questions

  • Failed: Could not find the system volume, reconfiguration is not possible

    Hi all

    When converting to a Server 2003 server to server ESXi 6.0.0 I received this message after all 96%.

    (FAILED: could not find the system volume, reconfiguration is not possible. ) )

    I use VMware vCenter Converter Standalone 6.1.1

    Anyone encountered this problem and found a solution?

    The log file is attached.

    Thank you very much!

    Terence

    Your problem is:

    2016 05-18 T 11: 09:48.300 + 08:00 WARNING vmware-converter-agent [02332] [sub Originator@6876 = Default] ERROR: [Mntapi_GetFirstBootDisk] more than * a * found active volume. Current active drive #0, another active drive #1

    Go to diskmgmt.msc and diskpart.exe and delete active indicator second disk/partition 1

    Also, keep in mind that mount point C:\backup\Ext\ is not copied.

    HTH

  • (95%) FAILED: Could not find the system volume, reconfiguration is not possible.

    Hello

    I'm trying to virtualize a physical machine to my VMware infrastructure. I success to another machine, but this time it crashes.

    Here are the features:

    Software: Client VMware Converter standalone 4.0.1

    Machine: Microsoft Windows Server 2003 Enterprise with Exchange 2003 SP1

    Disks: 2 * 80 GB drives used in RAID 1 software mirror (2 partitions C: & D: cross the two discs)

    VMware farm: ESXi 4.1

    Configuration of the converter: http://image.bayimg.com/faackaadc.jpg

    I try to convert the machine but I get the following message "FAILED: could not find the system volume, reconfiguration is not possible." 95 per cent at the stage of reconfiguration (he create only a single vmdk).

    My research, it is likely due to software mirror, implying to dynamic disks.

    But I must not modify the physical machine, I have to migrate the computer because it is unchanged.

    A machine appears in vCenter. When I started it, it does not start. With QParted, I activated the flag of "boot". Now the machine starts, but I immediately get a blue screen even in safe mode. ( http://image.bayimg.com/faacaaadc.jpg )

    I've added the vmdk to another machine, and run diskmgmt.msc to convert dynamic disk to basic disk, but he saw disc base already.

    Initial configuration of the drives here: http://image.bayimg.com/eaacoaadc.jpg

    Attached files: boot.ini and newspapers

    What can I do to convert my machine?

    Thank you and sorry for my English

    =====================================================================================================

    Hello

    I try to virtualize a physical machine to my VMware infrastructure. I successful already have to pay another machine, but it it crashes.

    Here are the features:

    Software: Client VMware converter standalone 4.0.1

    Machine: Microsoft Windows Server 2003 Enterprise SP1 with Exchange 2003

    Disks: 2 80 GB drives used software mirror RAID 1 (2 partitions C: and D: cross on two discs)

    VMware farm: ESXi 4.1

    Conversion of configuration: http://image.bayimg.com/faackaadc.jpg

    I try to convert the machine but I get the following message "FAILED: could not find the system volume, reconfiguration is not possible." 95%, stage of Reconfiguration (it has created only a single vmdk).

    According to my research, it is probably due to the software mirror, which created from dynamic disks.

    Alternatively, in I am not touching the physical machine, I have to migrate the machine what without changing.

    A machine appears well in vCenter, when I start, it does not start. With QParted I activated the 'boot' flag The machine boot now, but I get a blue screen immediately, same en safe mode. ( http://image.bayimg.com/faacaaadc.jpg )

    I added the vmdk on another machine, with diskmgmt.msc I wanted to convert the dynamic disk to basic disk, but he was already seen as a basic disk.

    Here is the initial configuration of the discs: http://image.bayimg.com/eaacoaadc.jpg

    What can I do pour machine to convert my?

    Thank you

    Have you tried

    Try the option "set up the machine" of the converter against the vmx file that you already have.

    _________________________

    VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

  • Could not find full download for RC build (30.0 RC2). Update fails. Beta channel has my current build (30.0b9).

    Could not find full download for RC build (30.0 RC2). Update fails. Beta channel has my current build (30.0b9). Channel has version 29.

    Update always fails on this work a bit locked machine.

    The Release Candidate of 30.0 build2 is located in http://ftp.mozilla.org/pub/mozilla.org/firefox/candidates/30.0-candidates/

    The 30.0 Firefox will be released June 10 if all goes well.

  • Vista - FAILED: could not find the system volume, reconfiguration is not possible.

    Hi, someone would be able to look at these newspapers please and advise, new to VM and trying to convert my old Vista PC before migrating fully to Windows 7, but its failure to 96% with "FAILED: could not find the system volume, reconfiguration is not possible." error.

    Thanks in advance, Dave

    Make sure your username is Administrator and UAC disabled on your Vista machine. HTH

  • LDAP create event failed: could not find orclpwdexpirationdate

    Hello

    When I try to create a user, I get the following error.


    IAM-2050243: process of Orchestration with id 333, failed with error 3010201-IAM: LDAP create event failed: could not find orclpwdexpirationdate in the list of mandatory or optional attributes...

    Query:
    1. I could create users connect to the OID even earlier. Y at - it no change of OID creating this issue?
    2. I could not find this OID attribute. What is a default setting available in OID?
    3. I could not find this attribute in IOM as well (fields of customer to manage users). I'm looking for this parameter in the IOM?

    Any help to solve this error?

    The complete stack trace is given below:

    [2013 01-28 T 20: 41:41.623 + 05:30] [oim_server1] [NOTIFICATION] [] [oracle.iam.conf.impl] [tid: [ASSETS].] [ExecuteThread: '4' for queue: "(self-adjusting) weblogic.kernel.Default"] [username: xelsysadm] [ecid: 583c10bfdbd326ba:-27ccd12:13c817229bb :-8000-0000000000000521,0] [APP: IOM #11.1.2.0.0] the system with keyword OIM property. There is no such thing as DiagnosticEnabled.
    [2013 01-28 T 20: 41:41.630 + 05:30] [oim_server1] [NOTIFICATION] [] [oracle.iam.platform.kernel.impl] [tid: [ASSETS].] [ExecuteThread: '4' for queue: "(self-adjusting) weblogic.kernel.Default"] [username: xelsysadm] [ecid: 583c10bfdbd326ba:-27ccd12:13c817229bb :-8000-0000000000000521,0] [APP: IOM #11.1.2.0.0] process Orchestration moved to doesn't have a stadium, and the error corresponding East - {0} []
    oracle.iam.platform.kernel.EventFailedException: IAM - 3010201:LDAP create an event failed: could not find orclpwdexpirationdate in the list of mandatory or optional attribute. : could not find orclpwdexpirationdate in the list of mandatory and optional attributes.
    at oracle.iam.ldapsync.impl.util.LDAPSyncUtil.createEventFailedException(LDAPSyncUtil.java:959)
    at oracle.iam.ldapsync.impl.util.LDAPSyncUtil.createEventFailedException(LDAPSyncUtil.java:975)
    at oracle.iam.ldapsync.impl.eventhandlers.user.UserCreateLDAPHandler.execute(UserCreateLDAPHandler.java:98)
    at oracle.iam.platform.kernel.impl.OrchProcessData.runPreProcessEvents(OrchProcessData.java:970)
    at oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:706)
    at oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:268)
    at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:801)
    at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.process(OrchestrationEngineImpl.java:550)
    at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.orchestrate(OrchestrationEngineImpl.java:485)
    at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.orchestrate(OrchestrationEngineImpl.java:439)
    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
    at oracle.iam.platform.utils.DMSMethodInterceptor.invoke(DMSMethodInterceptor.java:25)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
    to $Proxy252.orchestrate (Unknown Source)
    at oracle.iam.request.impl.RequestEngine.startOrchestrationFromPreProcess(RequestEngine.java:5350)
    at oracle.iam.request.impl.RequestEngine.triggerOperation(RequestEngine.java:5297)
    at oracle.iam.request.impl.RequestEngine.doOperation(RequestEngine.java:5028)
    at oracle.iam.impl.OIMServiceImpl.doOperation(OIMServiceImpl.java:43)
    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
    at oracle.iam.platform.utils.DMSMethodInterceptor.invoke(DMSMethodInterceptor.java:25)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
    to $Proxy466.doOperation (Unknown Source)
    at oracle.iam.api.OIMServiceEJB.doOperationx (unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.oracle.pitchfork.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:34)
    at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
    at com.oracle.pitchfork.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:42)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
    to $Proxy465.doOperationx (Unknown Source)
    at oracle.iam.api.OIMService_1soh89_OIMServiceRemoteImpl.__WL_invoke (unknown Source)
    at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
    at oracle.iam.api.OIMService_1soh89_OIMServiceRemoteImpl.doOperationx (unknown Source)
    at oracle.iam.api.OIMService_1soh89_OIMServiceRemoteImpl_WLSkel.invoke (unknown Source)
    at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174)
    at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:345)
    at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
    at oracle.iam.api.OIMService_1soh89_OIMServiceRemoteImpl_1036_WLStub.doOperationx (unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
    to $Proxy464.doOperationx (Unknown Source)
    at oracle.iam.api.OIMServiceDelegate.doOperation (unknown Source)
    at oracle.iam.ui.catalog.model.am.CatalogAMImpl.doOperation(CatalogAMImpl.java:1316)
    at oracle.iam.ui.catalog.model.am.CatalogAMImpl.submitCatalog(CatalogAMImpl.java:1697)
    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at oracle.adf.model.binding.DCInvokeMethod.invokeMethod(DCInvokeMethod.java:657)
    at oracle.adf.model.binding.DCDataControl.invokeMethod(DCDataControl.java:2143)
    at oracle.adf.model.bc4j.DCJboDataControl.invokeMethod(DCJboDataControl.java:3114)
    at oracle.adf.model.binding.DCInvokeMethod.callMethod(DCInvokeMethod.java:261)
    at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1635)
    at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:2150)
    at oracle.jbo.uicli.binding.JUCtrlActionBinding.invoke(JUCtrlActionBinding.java:740)
    at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.executeEvent(PageLifecycleImpl.java:402)
    at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding._execute(FacesCtrlActionBinding.java:252)
    at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding.execute(FacesCtrlActionBinding.java:210)
    at oracle.iam.ui.platform.utils.FacesUtils.executeOperationBinding(FacesUtils.java:165)
    at oracle.iam.ui.platform.utils.FacesUtils.executeOperationBindingFromActionListener(FacesUtils.java:112)
    at oracle.iam.ui.catalog.view.backing.CartReqBean.submitActionListener(CartReqBean.java:833)
    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.sun.el.parser.AstValue.invoke(AstValue.java:187)
    at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:297)
    at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1256)
    at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
    at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:148)
    at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:102)
    to oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$ 1.run(ContextSwitchingComponent.java:92)
    at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
    at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
    at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:96)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:1018)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:386)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:194)
    at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
    to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.adf.view.page.editor.webapp.WebCenterComposerFilter.doFilter(WebCenterComposerFilter.java:117)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
    to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:446)
    at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
    to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:446)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
    at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.help.web.rich.OHWFilter.doFilter (unknown Source)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.iam.ui.platform.servletfilter.IdentityContextFilter.doFilter(IdentityContextFilter.java:50)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.iam.platform.servletfilter.PwdMgmtNavigationFilter.doFilter(PwdMgmtNavigationFilter.java:164)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.bpel.services.workflow.client.worklist.util.WorkflowFilter.doFilter(WorkflowFilter.java:248)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.bpel.services.workflow.client.worklist.util.DisableUrlSessionFilter.doFilter(DisableUrlSessionFilter.java:70)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:179)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:119)
    at java.security.AccessController.doPrivileged (Native Method)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
    at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
    at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
    at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3730)
    to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3696)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    ]]

    Published by: user10307811 on January 28, 2013 07:28

    Hello

    You must create the orclpwdexpirationdate attribute and add it to the OrclXIDPersonobjec class in OID

  • HP Pavilion 15-p031st: I could not find the drivers for Win7

    Hello!

    I could not find the drivers for win7. Except these things, my computer works perfectly with win7.

    BCM43142A0: USB\VID_0A5C & PID_216C & REV_0112 (I think it's a bluetooth driver)

    Unknown device: ACPI\HPQ6007 (I don't know, but it is a driver of Wi - fi button)

    Driver Finder online from HP could not find those too. I don't want to use win8 on my laptop because ı couldn't figured out. So please help as soon as possible...

    Greetings from the Turkey

    Hello:

    You need this driver for the 6007:

    This package provides the HP 3D Driveguard software (HP ProtectSmart hard drive Protection) for the laptop models running a supported operating system. HP 3D Driveguard protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

    File name: sp67280.exe

  • could not find the drivers for window7 32 bit 15-d018TU hp

    Dear Sir, I recently bought 15-d018TU with window 8.

    I installed 32 bit Windows 7.

    but I could not find the drivers for window7 32 bit.

    I need drivers now

    1 network cards

    Bluetooth 2 controller

    3 network controller

    4 PCI simple communication controller

    5 SM bus controller

    USB 6 bus controllers

    7 Ethernet controller

    Hello:

    You should be able to use all the W7 32-bit drivers and software from the HP Probook 450 G0 on your model, except the audio.

    Your model uses the Intel HD graphics driver.

    DO NOT USE ANY BIOS OR THE FIRMWARE OF THIS MODEL FILES

    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=5359407&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4052%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

    Audio: Accept the agreement.  Download and install the driver first on the list.

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  • Error in the logs when a workflow running on the web client of vSphere WARN {} [TypeQualifierToDecoratorConverter] could not find the mapping for: class ch.dunes.model.type.qualifier.TQCallerParameter, [kind:null, name:contextualParameter, value: __NULL__

    I see this error:

    WARN {} [TypeQualifierToDecoratorConverter] could not find the mapping for: class ch.dunes.model.type.qualifier.TQCallerParameter, [kind:null, name:contextualParameter, value: __NULL__]

    pop up in newspapers of vCO a few times on a workflow when I try to run it from the web client of vSphere.  I wonder if it is somehow contributing to the time it takes to render the page.  We never saw it or someone has a clue about what might be the cause.  Newspapers are clean when I run the workflow of the vCO client.

    TQCallerParameter is a kind of decorator that is not exposed in the REST API. This warning message is safe and does not affect performance at all.

    You don't see it during execution of the workflow of vCO customer because the customer vCO does not use the REST API and therefore does not need to run conversions Decorator.

  • When using adjustment layers, I get the message "adobe could not rasterize because pixels for this layer data are not directly editable" what's the problem?

    When using adjustment layers, I get the message "adobe could not rasterize because pixels for this layer data are not directly editable" what's the problem?

    This happens because there is no mask on adjustment and you have selected the Brush tool. You cannot paint on an adjustment. If the masks are not be created by default when you create the adjustment and you want that they be created, select mask add default option in the context menu of adjustments of the

  • Setup failed: Setup could not find a device supported to write the image of the system of

    Hi, I just downloaded VMWare ESXi 3.5 and I can't seem to install on my system. Error, it evokes, installation could not find a support designed to write the ESX 3.5i system image, what device should I see, I have a hard drive works perfectly installed what should I?

    all responses appreciated

    Kind regards

    Mykola

    Take a look at these.

    http://www.VM-help.com/ESX/esx3i/Hardware_support.php

    http://www.VM-help.com/ESX/esx3i/find_PCI_ID.php

    http://www.VM-help.com/ESX/esx3i/ESXi_install_to_IDE_drive/ESXi_install_to_IDE_drive.php

  • Error code 28: could not find the drivers. Windows 7 64 bit could not find the drivers for my Seagate Expansion Portable Drive. The same system works for another 32-bit version of windows 7.

    Hi, I would be grateful for help on this, I bought a new seagate expansion external hard drive not too long ago (abt 3 months old) and tried to use the device only recently (to back up my files). Windows has detected the drive but says that it could not find the drivers. (code 28)

    When I tried the drive on a 32-bit computer, it showed up working find and dandy. When it is plugged in the computer of the alien-ware, same error.
    Tried the uninstall from Device Manager and restart the computer, still the same error.
    Services.msc open and found windows install offshore. He turned on automatic, but the same error came out. Plug and play Windows was already working.
    Checked Windows SP1 worked, still the same error.
    He got me completely baffled.
    Before this, I had other problems with USB and disabled driver signature Verifier (I think that's what it was called) before you boot into windows. Worked very well for my flash drives each time that I did.
    I also had another external HARD drive which was held only 160G and it worked, so I'm not sure what the problem is with this particular external hard drive.
    Please help, I'm going crazy on this problem...

    The specifications of my devices are as follows:
    Computer
    Model:
    Alienware M14x
    Type of system:
    64-bit operating system
    Hard drive model:
    Portable Seagate Expansion 1 TB drive

    Hello

    28 error code means that the device was not fully installed.

    Method 1: Connect the device, run the hardware and devices Troubleshooter and check if that helps.

    To open the Troubleshoot utility equipment follow the given link:

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    Method 2: You can update the drivers and check out them.

    Updated a hardware driver that is not working properly:

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Additional information.

    Install a USB device:

    http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

    Hope this information helps.

  • Could not find a download for Windows Live Family Safety for Windows 7

    Hello

    I want to download Windows Live Family Safety for Windows 7, but I could not find this download anywhere.  I've found directions on how to download and a link to the download, but ultimately I'm directed to a download for Windows Essentials which includes no parental control.  I Googled, tried Windows 7 help & many other sites and have not managed to find a download for this program.  Is it not possible to get this download more?

    Please let know us if anyone has an idea for me.  I've been spinning my wheels on it for hours.  Thank you for reading this.

    Is it the instructions and the page that contains the link you tried: http://windows.microsoft.com/en-us/windows/set-up-family-safety#set-up-family-safety=windows-7

    It contains step by step instructions.

    You have a Windows Live ID account / Microsoft account?

    J W Stuart: http://www.pagestart.com

  • Equium A100-320: could not find the drivers for W/Lan and Lan to XP Pro

    Help!

    I installed xp Pro on a laptop of friends (at his request), but I can not find driver that work to install the lan and w/lan.

    I tried the intel lan drivers but they do not appear that to uninstall, the material has the normal yellow question? against it.

    I'm having the same problem with the w/RL, or pickup w/local network after installing drivers. It makes no difference if I install the management software either.

    I have mucked for hours, but just cannot get to be detected and work.

    Any help would be appreciated.

    Thank you

    James

    Model is an Equium A100 - 320
    PSAABE - 00J00HAV

    Hello James

    All the drivers, tools, and utilities are the same for Windows XP Home edition and professional home. Please visit the Toshiba download page and download all the stuff from there. Make sure which model of laptop, you choose. It must be the PSAABE model.

    Before you start facilities, reading document installation instructions and install all things in order. All that s!

  • Pavilion 15 - ab210tx: could not find the drivers for my HP Pavilion 15 - ab210tx

    Hey

    Recently I bought HP Pavilion 15-ab210tx and while I was able to install the graphics driver (NVIDIA) by manually clicking Computer Management > Device Manager. I'm unable to download and install the drivers for: network controller, SM Bus controller, PCI.

    I checked the HP Web site, but it only provides drivers for Windows 10 while my phone is running on Windows 8.1

    When I click on the option to automatically update the drivers on the internet, I get the error: Windows could not install the driver.

    HP Pavilion 15-ab210tx

    Windows 8.1

    Please give the link to install the drivers.

    Thank you

    You are the very welcome.

    I think you need these drivers...

    HECI #1 - 9D3A:

    This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.

    File name: sp72866.exe

    Intel thermal DPTF peripheral frame - 3400 & PCI data acquisition and Signal Processing controller:

    This package contains the driver which allows Intel platform dynamic and thermal firmware setting. Intel platform dynamic and thermal environment information system temperature and power use for the thermal protection of the system to work properly. This package is provided for the laptop models running a supported operating system.

    File name: sp72870.exe

    Unknown device: it's probably either... I need the hardware ID to tell you exactly what it is.

    If it is acpi 6001 you must first driver below and if it is acpi 6007, then you have the other I posted.

    This package provides the pilot button HP wireless for the laptop models running a supported operating system.

    File name: sp71829.exe

    or this:

    This package provides the HP 3D DriveGuard software (HP ProtectSmart Hard Drive Protection) for the laptop models running a supported operating system. HP 3D DriveGuard software protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

    File name: sp71811.exe

Maybe you are looking for

  • Firefox crashes whenever I try to play a YouTube video

    Hi all. I had an annoying problem since this morning. I am able to view the homepage of YouTube, but whenever I try to watch a video, the player will work for a short period of time, usually a few minutes - and then Firefox will freeze. A minute or s

  • Satellite Pro C660-171 - Double entry and/or loss of input key while typing

    Toshiba Satellite Pro C660 As we bought this laptop in November 10, she has had intermittent problems with typing. Find the keyboard will miss the characters typed or type them twice. Fortunately, he can this all day and then stop and return to norma

  • Impossible to install the new Tempro V2.2

    You are prompted to install the new version of Tempro (V2.2). Installation is finished and asked to view and accept the privacy policy. MsDos screen appears with Temprolauncher.exe. Then I went to accept privacy policy screen again. Is there a soluti

  • OPutlook Express does not recognize my password

    Even when I re - get my password it still does not recognize How can I fix theis problem? Please respond to my email address which is * address email is removed from the privacy * I be able to read my gmail account usingin Thanks in advance for any h

  • How to save a playlist as UTF-8 without BOM *.m3u8?

    How can you save a playlist as *.m3u8 UTF-8 without BOM (byte order mark)? A few songs on my playlist appears in the clip because they contain characters such as e, to, e I did a search on this forum and found the solution that saves the playlist as