Automatic dial twice then get busy signal no fax cannot be sent

Similar Questions

• Call to phone home iphone only gets busy signal

  Phone call home (fixed) to the 6s iphone Gets a busy signal. I don't have any blocked users. How can I fix this?

  Make one

  Force reboot

  http://support.Apple.com/en-us/HT201559

• When calling from my iphone, I get a busy signal, but it does not

  Iphone5S: when calling from my Iphone, they get a busy signal, but I do not use it.

  Is do not disturb on? (icon of Crescent Moon in the right line at the top)

• Incoming callers get the busy signal and AA incorrect

  Hi guys,.

  I have two questions for which I have been unable to get answers from the documentation. I'll give you a bit of background:

  On the SPA9000 I configured line 1 with my VoIP service that uses iiNet here in Australia. She is saved and I can do some incoming and outgoing calls very well. I also have a SPA400 on the network that routes my landline Telstra (PSTN) phone system so that people can receive calls on this as well. For now I unplugged the landline of the SPA400 so that it is only 1 line VoIP which is active.

  1. The first problem is that when I'm on an outgoing call or called someone entering, the next person trying to call on our number gets our Messaging voice iiNet. This suggests that the SPA9000 said VoIP provider that I am on the phone and so busy. The thing is I'm getting the AA to answer calls and their route accordingly which means I can accept more than only 1 call via. Is there a way to stop the SPA9000 to say the VoIP provider who I am on the phone, so that nobody gets a busy signal?
  2. The second problem is that even if I set the AA advanced, and saved my own invite you for 5, 6 and 7... the AA is always respond with the default record (line 1). I thought that once I enabled advanced AA he was supposed to use my custom recordings? Does this mean that I have to record over the other guests (1-4) or have I not correctly cela configured?

  Thank you for taking the time to read this rather long post

  Thank you

  Thanks mate, I thought better meet and close this thread. Indeed, the first problem was with my ISP (VoIP provider). The SPA9000 appears in support of several incoming calls by default however I had to activate call waiting for my VoIP service for calls to never pass through to the SPA9000 if there was already an ongoing call.

  The second issue seems to be resolved from one day to the next, I came this morning and the auto attendant is all behavior suddenly himself. I can only imagine that there may be a period during which the SPA9000 needs before a new script of AA is implemented?

  In any case I have will mark this as a solution in case someone has these problems. If someone has all understand why there was such a delay in my new script 'start-up' AA I'd love to hear it.

  Thank you

  Chris.

• When I plug my HP Officejet 6500 E709a in my telephone jack incoming calls, get a busy signal.

  I have Brighthouse for my phone, internet and television. I recently moved and in my previous House, I have brighthouse and the same in one and same phone. I have a new computer with windows 7.

  If I pull the phone line I can get incoming calls. If I plug the phone line, I get only a busy on the incoming signal. Disconnection of the power or usb it makes no difference.

  I found the problem. When I used the calls a 2 line phone incoming cord has got a busy signal. When I changed to a 1 line cord phone incoming calls came through. I have only 1 line.

• How automatically dial the internet connection in the browser firefox to start the browser in internet Explorer

  I have ADSL modem broadband where I have to connect to the internet by connecting using the sequence of steps

  Control Panel > network connection > create a new connection > Internet > set up my connection manually > Connect using dial-up modem OR connect using a connection braodband including user name and password required
  create this connection, I must provide the user name and password provided by the ISP.

  I have to dial internet connection manually after the modem set automatically connect to the local network
  I found a solution for internet explore and changing the setting internet explore start automatically component internet connection that I start the internet explore.
  is their in mozilla firefox an option to automatically call the internet connection that I open the firefox browser?

  and there is no solution that I began my internet computer connections established automatically without having to open any browser, if this solution is not available, please tell about it.

  The setting that you set in IE also affects Firefox. For example, if you set the following, and then when Firefox makes a connection request to Windows, Windows is supposed to establish the connection:

  Windows Control Panel > Internet Options > connections or
  
  Internet Explorer Tools menu > Internet Options > connections

  "Dial whenever a network connection is not present"

  Source: How to make Firefox automatically dial up

• event twice to get the answer, run

  Hello, newbie here.  I did a little routine to take an identification number entered by the user (usually 4 digits, but not exclusively as such) and structure of the event allows you to add an alpha prefix and this year as a suffix, and then displays the new string.  I'm trying to get a handle on works the structure of the event, as well as text, strings and date functions.  It works as it is, but I have to run the event twice to get the right result.  Any suggestions or explanations are really appreciated.

  PS I also noticed that the string functions and the text don't work in the same way.  The control of the chain added whenever I entered a new identification number and didn't all of its contents to the CONCATENATE node would be out and I couldn't find a way to limit it to the current entry.   The text control gives me what I want, but it appears in my 'Express', not classic or modern menu, which seems to have their own advantages in different situations of the screen formatting, etc.   I guess I could build another function to extract the desired part but that seems like overkill.  Any tips?

  Thanks, Jim

  That does what you want it to do?

  You must have control of the string to be read inside the a case for event.

  When you run your VI he read control of the chain before he expected in the case of the event. So if you do not enter the chain before you click on the arrow to run, you will not get the correct string. Then when you run the 2nd time the chain is already in control of the chain so he can read it.

  That's why you had to run it twice.

• Found that this problem was due to windows being disabled "Wireless Zero Configuration" service. Found this automatic setting and then by installing the software corrected the problem.

  How to get through this process of changing windows 'Wireless Zero Configuration' service is disabled.  Found this automatic setting and then by installing the software corrected the problem.

  Hi Joseph,.

  1 are you always face the question or the issue are already fixed?

  2 Windows operating system you are using?

  If you still experience the problem, you can follow this link completely and check if the problem persists.

  In the Windows wireless network connection problems

  You can also read the following article and check.

  How can I disable wireless configuration and enable Windows XP Wireless Auto Configuration services

• BlackBerry Smartphones Re get a signal after being away for a long period of time!

  Hi all

  New to the forum, so I would like to join the thinking and see if someone can help with a small problem I have.

  I work in the middle of nowhere quite often, where the telephone signal is very low or non-existent. (I'm with Orange BTW).

  The problem seems to be that when I was out of range of the signal for a while, (the shortest period up to present about 30 minutes), and I'll be back in range, my BB doesn't automatically drop the signal.

  The only way I know to regain the signal is off the phone (red button does not restart the battery!) and again on.

  The phone then searches the signal and everything returns to normal... that is until I left out of reach!

  Y at - it a shortcut to re capture the mobile signal rather than extinguished/turned on?

  Thanks in advance

  M.

  Usually, you can simply go to manage connections > Mobile network and turn off, pause and turn back on your mobile connection to find your network.

• Get the message "This Mac cannot connect to iCloud due to a problem with my Id, open Preferences to solve iCloud iCloud" after entering my password which is accepted and then after a minute or two messages is.

  Get the message "This Mac cannot connect to iCloud due to a problem with my Id, open Preferences to solve iCloud iCloud" after entering my password which is accepted and then after a minute or two messages is.

  I'm your pain ptapp!

  Through my research for an answer that solves this problem, I have found that not even Apple knows how to solve this problem of password to iCloud.

  All 4 of my devices constantly ask my password because of some problems with xyz account.

  Then I enter the password only to be told that iCloud cannot check my password.

  Then after several repetitions of this I get locked and have to go to the site apple id to change my password.

  I didn't spend $6 000 on these beautiful devices so I could spend countless hours dealing with support (with no positive result) and find themselves just beyond myself in frustration. I have a Mac Pro, 2 iPads, 2 iPhones and an iPod touch. All are behaving this way, no matter what it is I'm doing at the time.

  Apple needs to fix this problem, if they have any idea how to.

• I can't stop the pop-up and adware ads in Safari. When I opened a new take, it is locked until I click a place twice, then two new tabs with advertising and virus detected by safari emerge

  I can't stop the pop-up and adware ads in Safari. When I opened a new take, it is locked until I click a place twice, then two new tabs with advertising and virus detected by safari emerge

  I tried following the instructions on the support page, in Apple, but it did not work.

  Force to leave Safari, then with the SHIFT key, restart Safari.

  Also use EtreCheck of www.etrecheck.com and see what else is running.

• When I click on my documents or my pictures etc nothing happens for a few minutes, then get an error report.

  My documents will not be open. When I click on my documents or my pictures etc nothing happens for a few minutes then get an error report. I tried in safe mode and the same thing happened. Any ideas how to fix this or get my picture back please?

  If it is a recent development, try to perform a system restore to a time before your problem.  You may need to run from the command line as described in the following article:

  "How to start the System Restore tool by using the option of safe mode with the command prompt in Windows XP"

  <>http://support.Microsoft.com/kb/304449 >

  HTH,

  JW

• Getting a signal, the photo and the audi on the Media Center once I moved house

  I had media center in 5 years on this computer and it worked fine all the time. When I moved to the University, I tried to set up the TV and I am unable to get a signal, an image, or any audio device, despite having paid my TV licence. I don't even have the ability to tune the signal! Can I get some advice on how to restart the program, so I can start to catch up on Hollyoaks:?

  Make sure you have a tv tuner, Decoder driver update etc.

  If necessary to uninstall and reinstall.

  S.Sengupta Media Center MVP

• Media Center has stopped to get tv signal

  Original title: units media center problem

  using vista and media center has stopped to get tv signal. I checked the Internet is good, but the Player cannot find a server

  Discussions were merged.

  Deleted duplicate.

  Hello

  See if that helps you.

  Do a system restore to before that the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  See you soon.

• Whenever I try to run a Windows program, with the exception of Windows Live Messenger, Windows Installer opens. Then I get a message that it cannot be opened.

  Then I get a message that it cannot be opened.  It started with Office Word 2007, now it seems to touch almost all Windows programs.

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type sfc in the search box, right-click to SFC. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  I hope this helps. Good luck.