Getting a signal, the photo and the audi on the Media Center once I moved house

Similar Questions

• I get an error code 80200053, and he says that my media center of windows has a tuner attached. My system broke down and I can restore?

  Windows Media Center

  I tried the update of the program

  .

  What can I do to another short of replacing the Avermedia card to ensure that the computer recognizes the card

  Manasa P

  Thanks, I tried all that none of this has worked. The system has been corrupted. I finally had to pull the card make the system thinks that the tuner card was again hardwsre and I download driver TV Tuner Avermedia m791 NTSC/ATSC and its applications of microsoft (r) Windows Vista (r) and installed the program that worked, and then I followed your instructions on how to configure the parameters and the tuner all over again now my media guide and everything works. Thanks for the help and suggestions.

  gomea

• How can I find my username and password for Windows xp media center? don't remember setting but cannot get back in after the restart.

  How can I find my username and password for Windows xp media center? don't remember setting but cannot get back in after the restart.

  Hi Carol_971,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  Method 1

  I suggest that you try to start in safe mode and then try to log on to Windows using the default Administrator account and then remove the password for your account, check if it helps.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 2

  If you are unable to log on to Windows in safe mode, refer to the article below and then try the steps mentioned, check if it helps.

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  http://support.Microsoft.com/kb/321305

• How can you get rid of the media library of Pop - Up connection when you reach the office after turning on the PC?

  I don't really know what I did but now I have a pop-up Windows Media Center appears asking to connect when I turn on my computer before it leaves me to the real office and I was wondering how to get rid of it, I can without quite easily but still, there is no need to when I just would rather it just do not attend all.

  Open Media Center, go to: settings, general, startup and Windows behavior, uncheck, start Media Center when Windows starts.

• How to I put online media and program libuary on the Media Center, I have everything expect those two, they are absent

  online media, absent on the media library

  How to I put online media and program libuary on the Media Center, I have everything expect those two, they are absent

  Check the settings of language and the region under the Control Panel, make sure that it is there.

  You can also try a manual download by pressing 'Download now' tab under tasks > settings > General > automatic download in WMC options.

  Make sure that during this firewall or IPSec is does not interfere with the download.

  If the above does not help then run Setup again.

  [Tasks > settings > General > installation Windows Media Center > rerun him.]

  Make sure you have the latest version of Silverlight or Adobe Flash Player installed.

  S.Sengupta Media Center MVP

• I keep losing my connection to the Media Center on my D-Link DSM 750

  I keep losing my connection to the Media Center on my D-Link DSM 750 when you try to view the video library. Music photos and everything else works fine?

  Hi Ghostrider457,

  Are a. When you facing this problem?

  B. you get errors?

  C. recent changes made on the computer?

  Method 1

  Try temporarily disabling the firewall/antivirus software and check if the problem persists.
  Turn on the firewall / antivirus after you check the status.

  Method 2: new user account

  1. open user accounts by clicking the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.

  2. click on manage another account.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. click on create a new account.

  4. type the name you want to assign to the user account, click an account type, and then click on create an account.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Try and tell us the result.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• I have Windows XP Media Center Edition Version 2002 with Service Pack 3 and I tried to run Media Center but I get an error message with ehshell.exe.

  original title: error with ehshell.exe

  I have Windows XP Media Center Edition Version 2002 with Service Pack 3 and I tried to run Media Center but I get an error message with ehshell.exe. Could you help me?

  This problem exists since the 1st Media Center. SP2 and SP3 had a difficulty, but it is obvious that it doesn't always. The same problem still exists in Vista today with a lot of other carried over from XP. System restore would work, but you do not have any good restore points so reinstall an operating system seems to be your only option.

  You probably don't want to do an OS reinstall you need for Media Center, but since it does not at all, you might want to play then remove the Media Center updates and or SP3 and reinstall them.

• Static IP remote access for the media center

  I NMH410 work through a WRT610N router.   My ports are configured for static IP access.  Seems to just going through www.ciscomediahub.com does not work well for me.

  Can someone provide the 'exact' URL I would enter in order to access my media center?

  Documentation of assistance through Cisco shows: https://Wan_IP_Address but that doesn't seem to work.  The demand is just there and finally once outside.

  To everyone:

  Apparently, I discovered and corrected the problem that I had with 'Remote access' to my Media Hub.

  Somehow, there are two configurations of router that had to be done.  On two port forwarding configurations has been necessary and once allowed me to access the media center.

  It seems that my ISP has a 192.168.x.x address router that was different from the address of my router 192.168.x.x.  It is on the home router when I incoming and make changes to the information of port forwarding.  The fact that I was getting an error message indicating that I wasn't even reached my router alerted me to the fact that my ISP was blocking remote access.  In the end, that's where my problem was discovered.

  Translate:

  If you have problems to access your media "at a distance" pole through its IP address (and not by the cisco media center), make sure that you configure the ports of the router specified by your Internet provider address, as well as the ports of the router that you have on your network home.

  I have forwarded port 443 on the two addresses of router port, and I can now access my media hub remotely.  Now if I can't play videos remotely, I'll be set.  This leads to another problem that I'll send it in another thread.

  Thanks for the help and suggestions of each.

• Configure the Media Center with TV combo tuner

  I'm trying to set up Media Center (Vista Home Premium) to recognize the analog part of my TV Wonder ATI 750USB tuner. Support page of Windows says ther is a fix. However, the services are not available and there is no indication when they will be available. Has anyone else experienced this problem and found a solution. ? If you have, I would be grateful if you could share it with me.

  My operating system is Vista Home Premium sp2.

  Thank you

  Hello

  ·        What happens when you try to configure Media Center with TV combo tuner? You receive an error message? If Yes, what is the exact error message?

  The fix for this issue is already installed Vista SP 1. Click on the link below. I suggest you to download the fix that is present in the article mentioned below and install it on the system and check.

  Windows Media Center does not correctly configure a combo TV tuner signals that supports ATSC and NTSC on a Windows Vista-based computer

  http://support.Microsoft.com/kb/929011

  Check if you are facing any of these symptoms that are mentioned in the article mentioned above and we do know.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• 0 x 80070011 when you try to add the Media Center of Windows 8 Pro

  I am attempting to add Windows Media Center to my installation of Windows 8 Pro but get an error message saying something with evil.  Looking at the logs, I see that the problem is "DoTransmogrify failed due to error 0 x 80070011" which indicates there is a problem with my user directory is on a drive other than the Windows folder.  Since I have an SSD relatively low to start I moved my user to a much larger hard drive folder.  Should not directory junctions work the same as if the file was on the same drive?  Is there a work around short replacing my user on the c: folder?

  Thank you!

  I had a similar problem with window 8 RSAT tools that lead me to this post in my search for a solution. I'm not positive that this will solve your problem but it worked for me. Because the Setup program does not seem as follows symbolic links that point to different disks, I simply said the installer the real location of the profiles it is updated during the installation. Open the registry editor and navigate to:

  HKLM\Software\Microsoft\WindowsNT\CurrentVersion\ProfileList
  Change the location of the "Default", 'ProfilesDirectory' and 'Public' StringValues to point to the real target of your users path a symlink on drive c. (IE. "D:\Users\*).
  Run the Media Center Setup
  Change back the path in the registry.
  (I'm not positive that this is necessary, as you'd still have the symbolic link on your C drive as points that anything using this path to the right folder, I just changed it back to %SystemDrive%\* so that I could test to see if the RSAT tools has always worked without the explicit path used in the registry.)
  Good luck. I hope this works.

• Qosmio G20-111: after disk HARD changing the Media center does not work

  Hi, I have a WME Quosmio G20-111, after a hard drive, toshiba support center evolution (disc hard bone) in Italy has reinstalled the WME but whenever I try to use the Media Center pc crash and show me a white screen. After several phone call they told me that the problem is that they don't update quosmio drive drivers?
  I'm desperate, any suggestions?

  [email protected]

  Hello

  Well, as far as I know that the Qosmio Player has been installed on the partition hidden on the new laptop, but perhaps the ASP is not install this application after replacing HARD drive.

  But I do not understand why the missing Qosmio Player should have a bad influence on the media library? MC is a Microsoft program that is part of the Windows XP MCE. Player of Qosmio is an invention of Toshiba and should have nothing to do with the MCE.

  However, you can try to install the Qosmio Player and then try to recover the entire operating system with the recovery CD Toshiba original delivered.

  Maybe it helps.

• How to change for the Media Center guide download time?

  How can I change the Media Center program guide download time?  My computer comes out of hibernation to download data at 12:15 and to sit down again it idling (for several hours) until she was put into hibernation or stop.  There is a utility that will change in time, but time is always changed back to the time of 12: 00.  I guess MC changes the time of return.  Thanks in advance.

  Hello

  You can follow the links below and try the advice given to solve the problem.

  http://Windows.Microsoft.com/en-us/Windows-Vista/download-updated-Guide-listings-in-Windows-Media-Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-guide-downloading-problems-in-Windows-Media-Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-Guide-listings-for-use-in-Windows-Media-Center

  Choose the manual option down and check if that helps.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have Windows XP Media Center 2005. The Media Center is missing. Help, please. Thank you...

  Windows XP Media Center 2005 will not open or load the file Media Center.  My computer does nothing but
  freeze the other programs.  The only way to close Media Center is to go to the Task Manager.

  Hello Beckymyers,

  Thank you for your message.  Let's try the following:
  Click "Start" > click "Run" > type cmd and press "Enter."
  At the command prompt, type the following entries and press "Enter" after each of them
  Regsvr32.exe atl.dll

  C:\WINDOWS\eHome\ehSched /unregServer

  C:\WINDOWS\eHome\ehSched/service

  C:\WINDOWS\eHome\ehRecvr /unregServer

  C:\WINDOWS\eHome\ehRecvr/service

  C:\WINDOWS\eHome\ehRec.exe /unregServer

  C:\WINDOWS\eHome\ehRec.exe/regserver

  C:\WINDOWS\eHome\ehmsas.exe /unregServer

  C:\WINDOWS\eHome\ehmsas.exe/regserver

  After you run these commands, restart your computer and test the Media Center.  Please let us know the result.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Digital Cable Set Top Box connected to the Media Center computer, forced to keep MC on the use of channels 3-cant TV Guide in Media Center to record

  I have to keep the center of the media on channel 3, and the decoder controls the channel I want to watch or record.  For example if I want to record channel 631 21:00 to 23:00 I would say the MC to record channel 3 for as many programs they broadcast between 9 and 23:00.  This process does not allow registration of the MC - guide as it was planned. I have to use the channels on the cable box only and always have the Media Center on channel 3. Is it possible to come back with the MC TV Guide and record by this guide as it was designed to do, while still using the cable set top box or some other Descrambler for replacement by the cable operator?  Basically, the decoder is a decoder which makes us put all our TV on channel 3.  But the cable ready TV I hear do not need the box, they can use another device.  The computer can do the same?  Nobody seems to have no answer to this problem.  Help!?

  I read your question. I asked you what happened when running
  TV Setup and specifically want to know if the TV Setup detected your set top
  Box/decoder and it happened. If Media Center does not automatically detect your decoder,
  have you tried the manual method to learn codes? I'm trying to help you
  features of Media Center EPG.
   
  You must ask the FIOS people if they have the equivalent of a DTA
  offered in the world of cable and OTA.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• White screen when I open the Media Center.

  Original title: Media Center white

  When I opened the Media Center, there is a white screen. I wouldn't change a thing and it has worked before. I have Vista 64 Home Premium.

  Hello

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Keep the computer in a clean boot and check the status of the issue. If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem. Continue with the remaining steps to pin-point on the third party service. After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.

  http://support.Microsoft.com/kb/929135

  Note: Please go up to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem

  Method 2:

  The screen may be black or the menu screen may be unresponsive in Windows Media Center in Windows Vista.

  http://support.Microsoft.com/kb/935901/en-us