Automatic hard drive detection error

Similar Questions

• hard drive detection error 2100

  My W530 just started displaying the error detection, however, Windows can still see the device, as well as the BIOS

  Windows it shows the real hard disk model.

  However, the BIOS shows as DRIVE.

  Does this mean the drive is failing (again), or is the SATA controller?

  This is a known bug. for anyone having problems (should probably post in the section windows 10), the problem is caused by the States of power enabling sata driver on the hard drive that does not support the bios.

  seems to have been fixed in build 9879

• 1720-smart hard drive detects failure immient

  product name - Z420 HP workstation LJ449AV

  OS - Windows 7 64 bit

  mistake - then the system startup it shows this error

  1720-smart hard drive detects failure immient

  Failed disk: SATA0 (gray)

  In the absence of capital: #B8

  change the status of job worth its rebooted automatically

  only 2 months before our company bought this system, please provide a solution

  The hard drive is faulty and must be replaced. It seems that the computer was purchased about two months ago and is still under warranty. Please contact HP Customer Support in your region to demand service guarantee.

  Please send Bravo

• Pavilion Slimline s5 1204 PC: Smart HARD drive detects imminent failure

  When I start the computer I get a warning: 1720-Smart hard drive detects drive not imminent failureATAO failing attribute # 5. How can this problem be solved?

  The disc is defective, stop using the PC now, replace the hard drive with a new one and reinstall Windows using your HP recovery media.

  Once you windows reinstalled on the new disk and the PC is running windows, fix the old hard disk on the pc using a sata to usb adapter, see if you can see the drive in Windows Expl. ORER, if you can copy out of your important files on the new drive C.

• 1720 smart hard drive detects imminent failure. do backup - how can I move my files when I get a new hard drive?

  Hi, I have "1720 smart hard drive detects imminent failure" made a backup, Gather I have to get another drive. How can I transfer my windows vista / files to new drive? Help, please.

  Hello

  There are different ways to do

  and these methods depend on your hard drive work

  hard drive manufacturers will normally provide the cloning to move your operating system software from the old to the new drive hard If your old hard drive still works

  Search for information on this subject on their Web site

  If you have vista business or ultimate, you can use the builtin vista complete PC Backup to move

  read the information below

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  or if you have vista home version you'll need 3rd party software

  link below is an example of this:

  http://www.Acronis.com/homecomputing/products/TrueImage/index.html

  also to put your machine how you bought:

  1. If vista is preinstalled, you should have a recovery on your old hard drive partition

  You can recovery disks to reinstall on your new drive hard If the old drive still works

  ask the manufacturer of the machine how

  2. contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  3. or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

• Installation of XP operating system in model of lab manager... No hard drive detected?

  I am currently trying to obtain a model of machine configuration virtual xp in lab management. I have deploy the model, mount the .iso image file, start the installation, but then installing XP spits a message that there is no hard drive detected on the computer. I checked the properties on the machine, there is obviously a hard drive I put in place. It is in the format of BusLogic SCSI parallel. Is there a specific reason for this installation isn't or doesn't see is not the virtual disk? I have not really found something in the help or documentation which speaks of a specific operating system installation issue. Everything is useful, thanks in advance.

  -va

  To install Windows XP, you must have a driver for the disk controller VMware disc. You can consult this article for download one-

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1000863&sliceId=1&docTypeID=DT_KB_1_1&dialogID=32908933&StateID=0%200%2029476991

  If that one doesn't work, then, you must submit a request for support and ask management to send you the right driver

• HP Pavilion a6645f no hard drive detected BIOHD-2 error

  1st off I'm no computer expert... so I really have no idea what I'm doing, but I've been looking online to the best of my ability and try everything that I have seen that I can understand how to solve the problems.

  First of all, I got the cursor flashing at the top left of a black screen, now I get the boot failure message, insert the disc... I did that dance together and nothing comes of it.  Error cannot be fixed with the scan that it allows me to do using the system disk, I did.

  I managed to access a screen that informed me that I have this error BIOHD-2, no hard drive not detected.

  It's a Seagate Barracuda HD 500 GB 7200.11

  I removed the Panel and went there... insured all caps were closed, tried a different SATA port... and when I go into the BIOS I can not get the comp to recognize any HD is connected... all read 0 MB.

  From my research I found information contradictory on this... some sound like its without a doubt a HD - sound problem is, some say it could be a motherboard problem?  Is - it necessarily one or the other based on the info I gave?  I read that I should try to connect the HD to another PC with a SATA port, but this will affect any PC I plug it somehow? Let's say another computer detects the HD when I look in the BIOS, I'll be able to extract all the files and programs from there? How will I know if the motherboard is the issue and not the HD? As ports have bad or the taking of the HD to the motherboard maybe? It is even probable, if yes?

  What if it is the HD, and I can install an old HD work? Is there a way I could try to extract anything from the Seagate which is in there now?  Unfortunately, the only things that I backed up on an external are some pictures and a few digital scrapbooking files.

  Still, I'm NOT a computer person so half may not even be English in computer science, but I hope I made sense. Laughing out loud

  Oh, and I'm no longer in warranty... HP told me when I called this past weekend when it happened. PC is about 3 or 4 years... don't remember not that December it was bought in.

  Thanks to all those who have actually tried to read and give a sense of my mess

  semperfibc,

  Thank you for your service.

  Several years ago, Seagate had a problem of firmware with the Seagate Barracuda 7200.11 drives. The reader would cease all features. Your beyond any warranty on this drive, and have no options that are financially reasonable.

  Now, you need to install a replacement drive.

  I hope you did your ONCE one Recovery DVD. Otherwise, you will need to buy them from HP.

  You can try an external SATA to USB box with this old disc, but there is no guarantee.

• I get error no hard drive detected, so I put in a new hard drive. It does not work. What can I do?

  Windows XP Home Edition on a HP Pavilion zv5405us notebook PC

  Without a cd operation, he begins by saying-

  Intel UNDI, PXE - 2.0 (build 082)

  Copyright...

  For Realtek RTL8139 (X) /8130/ 810 X PCI Fast ethernet controller v2.13 (020326)

  PXE - E61: Media test page, check the cable

  PXE - MOF: Exit PXE ROM.

  And when I boot from the CD of the operating system it is to the point where I choose to install or repair.

  So, if I click on one of those who he says...

  Setup did not find hard drives installed on your computer.

  Setup cannot continue.

  I tried replacing the hard drive, but it was always the same thing, so I put the old one back in.

  I need to find a way to fix it.

  Can anyone help?

  Assuming that your laptop was manufactured after 2003, you can try the HP drive diagnostic tool, but it seems that if you have a more serious hardware problem: cable/connector from the hard drive is faulty or the on the motherboard disk controller has failed.

  You can see also solve the Start Up and No Boot problems checklist but that probably tells you nothing that you have not already tried.

  See also Overview of how the problems when a computer is not Boot or Start Up properly

• Pavilion g6 2226tu: 'no hard drive installed' error in material diagnostics UEFI

  My pc is very slow and freezing much n after troubleshooting and consulted technicians on the chat, I went to the recovery. It's everything is OK with recovery but the same problem was there. N all of a sudden today I tried to restart it when it froze, it showed a blue screen with the error 'blackout driver State' it displays information is collected to be sent as a report. After 10 minutes, it ended at 100%. N he tried to restart, but he went to gray white screen after the execution of the repair automatic FIR seconds. After five minutes of waiting, I turned it off n tried to turn on n check with hardware diagnostic uefi. But he could not detect my hard drive of 500g. She appeared no hard drive or hard drive not installed message.
  Now what is it? My hard drive broke down, or it could be another hardware problem?

  He succumbed to a slow death for a long time, but now he is dead and must be replaced. Chances are that it is past the time what data could have been recovered. Sorry for your loss. If you want help replacement and software, we can do.

• HP pavilion 500 076ea: no hard drive detected or has no

  Put in a new power supply in a pc
  Comes up with no detected boot drive or does not, how can I solve this problem?
  
  What I have to go out and buy a new operating system e.g. Windows 8 to solve this problem or is the problem worse than that
  
  If I missed any information you need help I can provide
  
  Thank you

  Hi @Fraser11,

  Welcome to the Forums of HP's Support.   I believe that since the departure of the power supply in your Pavilion 500-076ea that your hard drive is no longer detected.   I am convinced that I will be able to help you find a solution, and I ask only that pay you it forward. When solve us the problem, I would mark you kindly post as accept as Solution so that others have the same or similar problem can find what worked for you.

  Please use the document of replacement of the power supply HP and Compaq Desktop PCs as a checklist to make sure that nothing was missed when you have replaced the power supply.  From my experience, most of the time when this error occurs after the replacement of the power supply there is a cable that is not properly plugged.

  Please let me know the results.

• Pavilion TouchSmart 23-f364: Hp Pavilion 23-f364 BIOS "finds it difficult to" hard drive Detection

  I have a HP Pavilion TouchSmart f364 23 for Christmas in 2013 and in 2014, the hard drive has begun to act. I would like to turn on the computer and it does not detect the drive or does not see the files it contains. The CD drive is detected and works all the time. I've updated the BIOS, I replaced the drive with a brand new, and since the old is in an external hard drive enclosure works like new money. The computer will always have problems in windows being blockages, then crashes. I looked for the reasons of the accident and they were due to mistakes of disk access. After reboot, the drive is not detected. In Ubuntu, the drive is detected and accessible (but I can't get the windows partition to mount, with the error "Windows is put in hibernation," even with the quick start off and a full stop). The point is that Ubuntu can see and access the drive to boot from the drive itself (if possible) and a live USB. Ubuntu will crash as or experience access errors, but when restart the BIOS sees not the disc. The disc turn and accesses a little bit, but nothing happens. In addition to the exchange of discs, I also swapped sata ports on the mobo with no luck, and power connectors are different, so no swap it. I want to know now if replace HARD drive cable may solve the problem or if I need to replace the mobo or this computer is just cursed. (Father: when I asked for a desktop I do not mean all in one)

  TL; DR: The Bios does not detect hard drive or detect but once at random, at random, windows crashes because of this, Ubuntu works perfectly well and has access to disk drive and boot Live, bios does not always detect drive. Tried upgrading BIOS, replacement drive and swapping mobo ports sata, no luck, CD player works great every time. You want to know if buying a new HARD drive cable works or if it is the mobo which is bad.

  Also note: when I updated the BIOS it says it resets the CMOS and I repeatedly loaded by default in the BIOS settings. I have found but not yet tried the CMOS clear jumper.

  Hi @Lesking72,

  Welcome to the HP Forums! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  Thank you for posting. I read your post and I understand that the old hard drive can operate as an external drive, but the new drive and the old disk cannot be detected in the BIOS. You can run hardware diagnostics to test the motherboard and hard drive. If the motherboard and the hard disc as well spent, you can consider if it is a cable problem.

  Here is a document, which you can view:

  Desktop PC HP - detection of hardware failures (Windows, 10, 8)

  For Ubuntu system, please refer to the support of Ubuntu.

  Let me know the results of your troubleshooting.

  To say thank you, click on the "thumbs-up".

  Kind regards

• My windows XP does not recognize an external hard drive. : "Error device malfunction.

  Original title: my windows XP do not recognize an external hard drive.

  I have Windows XP... When I try to plug in an external hard drive (with automatic installation of the software and the ability of usb 3.0/2.0), my computer does not recognize the material and gives an "error of malfunctioning of the device.

  Hello

  1. What is the brand and model of external hard drive?
  2. don't you make changes on the computer before this problem?

  Read the following article that may help you resolve this problem.
  Advanced troubleshooting tips for General USB for Windows XP problems
  http://support.Microsoft.com/kb/310575

• Windows 8 Installation, no HARD drive detected

  Hi guys,.

  My first post here and hope I can find a solution here. I have the Alienware 17 X R4. My main HARD drive is the 256 GB SSD. So, apparently, I had windows 8.1 and everything was working fine until I don't know how I got the 10 installed top windows. So now, I have 10 windows on it. After using it for a day, that I wanted to do a clean install just so I could get rid of some unnecessary errors. I created a bootable USB stick using the alienware respown. When I tried to do a clean install I just cleaned my C drive and chose the option to completely clean my drive. The installation failed, and now I'm left with a computer that does not have an operating system on it. Since nothing did not work I thought of formatting my C drive which I did using the command prompt and also decided to return to windows 8. I had the USB bootable to windows 8. I has not changed anything on the system BIOS configuration, but would still installation system and ensured that I return to the default settings just to be sure.

  I started installation of windows 8 and here my problem, I am not all readers. I had 2 HDD. An SSD is and the other is a regular 1 TB of HARD drive. I don't see any of my hard drives so I can't install windows more. I also ran the full system diagnostics, and it seems all good. I tried to put the discs into the USB port but it would still give me an error. Finally, I read somewhere on the internet to change something in the RAID BIOS to ACHI. I did and that actually worked. But I tried to install windows and when it reaches it took some time and that the installation was not performed. Now I don't know what to do about this. Please someone suggest something, I want to just my computer running with the right settings. I don't want to waste his time. If anyone has an ideas please let me know.

  Thank you

  Delvallée

  Don't bother trying to reinstall Windows 8, it is now obsolete. Since you already had put Windows upgraded to Windows 10. Your systems hardware profile is saved with a Microsoft Product Activation Server and considered a Device 10 Windows , this means that you can reinstall clean Windows 10 directly. See here for more information about getting support for Installation of Windows 10:

  http://dellwindowsreinstallationguide.com/download-Microsoft-Windows-and-Office/Download-Microsoft-Windows/download-Windows-10-OEM-and-retail-ISO/

  You must use the right support to Installation of Windows 10 and not a Windows 10 disk recovery you have a system with several hard drives. Make sure that you select the correct edition. Skip the product three times in the course of installation and Windows 10 key it will activate automatically.

  You should not need to prepare and load the SATA drivers for Installation of Windows 10 support, but if you make them instructions are here:

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows/downloading-preparing-and-loading-SATA-drivers/

• Smart HARD drive detects imminent failure on Satellite P

  Hello

  I have a message "SMART provides a defect on the disc dur0: TOSHIBA MK5055GSX-(S1)" or (the same in English) "Smart Drive detects imminent failure".
  On the newsgroups different 'people' says to change the disk.

  My problem is not to change the drive, it's easy. Expensive, but easy.

  As I understand it, on each disk from Toshiba, a hidden partition, which allows to restore the machine, with Toshiba Recovery Disc Creator there?.
  I would like to change the disc and use the Toshiba Recovery Disc Creator? to restore Vista.

  How can I reinstall everything what to use Toshiba Recovery Disc Creator? This new disk to reinstall Vista from this new album.

  Thanks for any response.
  ADri

  > If I understand correctly, each disk Toshiba, there is a hidden partition, which allows to restore the machine, with Toshiba Recovery Disc Creator?

  That s not entirely correct!
  The Toshiba Recovery Disc Creator creates the recovery disk! The recovery disk allows to recover the laptop using the drive and not the HARD drive recovery process!

  New portable Toshiba supports HARD drive recovery which allows to restore the laptop without the use of the recovery disc!

  You can view this document on the HARD drive recovery:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=58

  Welcome them

• Pavilion g4: hard drive 301 error

  I had a hard drive error 301 in my hp pavillion series. I understand that the hard drive has failed. I had replaced with a new one. I would like to know if I could always back up my old hard drive or to recover my files if I run it in a disk hard slave in another pc? Is there another way I can get back my old files?

  Thank you

  DAY

  If there is any life left in the drive, it is usually possible to recover some of the files. The simplest method uses a hard drive USB enclosure or a card. Then you plug it into a usb port on a computer to work and can browse the disc hard as internal hard drive. Copy files to the hard drive of the host computer.

  Ex:

  http://www.TigerDirect.com/applications/SearchTools/item-details.asp?EdpNo=2300574 & SKU = U12-42063

  http://www.TigerDirect.com/applications/SearchTools/item-details.asp?EdpNo=3276554 & catid = 3770