Automatic numbering sequence does not for a chapter in a book FM10

Similar Questions

• Default Transitions to automate to sequence does not, any ideas?

  Only the thread that I could find in the research was this:

  http://forums.Adobe.com/thread/387981

  However, I tried some stuff in there and still have a problem. He used to work some time ago. Now when I try to use to automate them to sequence, no video/audio transition default appear, even when these options are clearly marked in the dialog box.

  Any ideas on what other settings I need to look?

  Do you have an overlap?  Without that, there is not enough media for transitions.

• Windows Mail automatic send/receive does not

  Windows Mail in Vista Business.  Automatic send/receive does not work, but when I manually click on the send/receive button, it works very well.  All I can do to fix this?  Thank you.

  Brian,

  Found the problem... the setting 'include this account... '. "became somehow unchecked.  I have re-selected it, and everything seems fine.

  Thanks for your help.

  In fact, I'm a little embarrassed that this little obvious problem escaped my attention.  :)

• Error: [ORA-02289: sequence does not exist.] -

  Hi guys!
  
  I have a problem when creating a package body.
  The bellows of the sequence is not known, and it is in the PACKAGE BODY:
  SELECT CAMPO_SEQ. CURRVAL IN pNewID FROM DUAL;
  
  Let me put the script and execution as:
  
  SQL > CREATE or REPLACE PACKAGE in the CAMPO_PACK
  2
  3 TYPE T_CURSOR IS REF CURSOR;
  4
  5 PROCEDURE InserirCampo (pNewID NUMBER, pCod_Requisicao NUMBER, pCod_Ti
  poCampo NUMBER, pCampo VARCHAR2, pDataInicial TIMESTAMP, TIMESTAMP, p pDataFinal
  Cod_Cidade NUMBER,
  6 pLogradouro VARCHAR2, VARCHAR2, VARCHAR2 pComplemento pNumero, GO pBairro
  RCHAR2, PDCP VARCHAR2, pProtocoloRelacionado VARCHAR2);
  PROCEDURE GetCamposByRequisicaoID (the pCod_Requisicao NUMBER, IO_CURSOR OUT 7
  T_CURSOR);
  8 PROCEDURE DeletarByRequisicaoID (pCod_Requisicao NUMBER);
  9
  10 END CAMPO_PACK;
  11.
  
  Package created.
  
  SQL > CREATE or REPLACE PACKAGE BODY CAMPO_PACK as
  2
  3 PROCEDURE InserirCampo (pNewID NUMBER, pCod_Requisicao NUMBER, pCod_Ti
  poCampo NUMBER, pCampo VARCHAR2, pDataInicial TIMESTAMP, TIMESTAMP, p pDataFinal
  Cod_Cidade NUMBER,
  4 pLogradouro VARCHAR2, VARCHAR2, VARCHAR2 pComplemento pNumero, GO pBairro
  RCHAR2, PDCP VARCHAR2, pProtocoloRelacionado VARCHAR2) AS
  5 BEGIN
  6 INSERT INTO Campo (Cod_Requisicao, Cod_TipoCampo, Campo, DataInicial, D
  ataFinal, cod_cidade, number, complement, Bairro, CEP, Logradouro, ProtocoloRel
  acionado)
  7 VALUES
  8 (pCod_Requisicao, pCod_TipoCampo, pCampo, pDataInicial, pDataFinal, BCP
  d_cidade, pLogradouro, pNumero, pComplemento, pBairro, PDCP, pProtocoloRelaciona
  (c);
  9
  * 10 SELECT CAMPO_SEQ. CURRVAL IN pNewID FROM DUAL; *
  END 11 InserirCampo;
  12
  PROCEDURE GetCamposByRequisicaoID (the pCod_Requisicao NUMBER, IO_CURSOR OUT 13
  T_CURSOR)
  14 EAST
  15 V_CURSOR T_CURSOR;
  BEGIN 16
  17 OPEN FOR V_CURSOR
  18 SELECT C, Cam.Cod_TipoCampo, Cam.Cod_Requisicao, Cam.Cod_Campo
  AM. Campo, Cam.DataInicial, Cam.DataFinal, Cid.Cod_Cidade, Cid.NomeCidade, Cid.Co
  d_UF, UF. Description UFDescricao,
  Cam.Logradouro 19, Cam.Numero, Cam.Complemento, Cam.Bairro, Ca
  m.CEP, Cam.ProtocoloRelacionado
  Campo Cam 20
  21 LEFT JOIN Cidade Cid ON Cid.Cod_Cidade = Cam.Cod_Cidade
  A JOIN LEFT 22 UF ON UF. Cod_UF = Cid.Cod_UF
  23 WHERE Cod_Requisicao = pCod_Requisicao;
  24 IO_CURSOR: = V_CURSOR;
  25 END GetCamposByRequisicaoID;
  26
  27 PROCEDURE DeletarByRequisicaoID (pCod_Requisicao NUMBER) HAVE
  BEGIN 28
  29 DELETE FROM campo
  30 WHERE cod_requisicao = pcod_requisicao;
  ENDS 31 DeletarByRequisicaoID;
  32
  END 33 CAMPO_PACK;
  34.
  
  Warning: Package body created with compilation errors.
  
  SQL > show err
  Erros para PACKAGE BODY CAMPO_PACK:
  
  LINE/COL ERROR
  -----------------------------------------------------------------
  10/5 PL/SQL: statement ignored
  10/12 PL/SQL: ORA-02289: sequence does not exist.
  SQL >
  
  What must I do to solve this problem?
  Thanks for the help!
  
  Anderson

  If there is no selected line then don't create the sequence by giving this command
  create sequences CAMPO_SEQ begins with 1 increment of 1;

  Arpit sinha
  www.OracleDBA.in

• automatic creation of navigation sequences does not

  I'm having the same problem with the TCS that PaulB1234 described in the General Discussion forum, except that I'm generating HTML output and I did only one book of FM in the project. When I click on "auto-create browse sequences of TOC", the list of sequences of exploration remains empty. Assistance of HR says to click "Yes" to the dialog box "to browse sequences", but no dialog box is displayed.
  
  PaulB1234 wrote:
  "I use RoboHelp 7 and FrameMaker 8 in the Technical Communication Suite. I added three FrameMaker 8 files based on my RH 7 project and I converted table of contents for each book. I then added three TOC TOC placeholder by default for the FrameMaker TOCs so that all three tables of contents would be generated in WebHelp output. Everything works well.
  
  "But when I choose" tools > sequence editor to browse ", click on the 'create automatically using TOC' button and choose the default table of contents to the"automatic creation of sequences to browse Using TOC"dialog box, some sequences don't appear in the list of browse sequences.". I tried selecting other TOCs also who were converted from the FrameMaker TOC and that no longer works.
  
  "What I am doing wrong? Or is there another step before that? Or is this a bug in HR? »

  Thank you! After doing a Force update, I was able to generate automatically the sequence to browse the table of contents.

  I'm not familiar with the sequences of travel as such. We are trying to replace a WWP default feature that allows the user to scroll through all the sections in order. The order to browse automatically created by HR provides similar functionality, but you can pass only through topics in a single chapter. There is a dropdown of the chapters so that you can select a different, but they are in alphabetical order, not sequential order. Therefore, it is difficult to go through aid 'page by page' somehow.

  Is it possible to put in place-to-end navigation? During this time I'll take a look at the available commands.

• Case Structure sequence does not move to the next iteration

  Hello

  I am trying to create a multifunction data acquisition and control of a laboratory instrument. As shown in the attached VI, I finally 3 different modes: simple, door double door and GC, each with their own functionality. So far, I worked only on the Mode of the door, so that the rest are empty. However, trying to make the system to wait for the interactions of the user, if the key 'only start door mode', it moves in this case without problem, and if there is no hurry, he waits, bike to the tab control like I want it. However, after execution of the VI with the pressed button, it will not return to the 'Wait' case, he freezes in "aquire" and refuses to return to the case "wait." I'm sorry if this is confusing, I think it will be clear when running highlight is used, it freezes just after the correct number of iterations in the loop for. thank you for your help,.

  <><>

  Normal 0 false false false fr X-NONE X-NONE / * Style Definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-marge-top : 0 ; mso-para-marge-droit : 0 ; mso-para-marge-bas : 10.0pt ; mso-para-marge-left : 0 ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ;}

  Hi Eric,.

  I think the sequence works as you want.  When I run it on my computer on my computer he is turned down for the case of waiting as you want.  I don't have to open the VI called single door Pulser.vi and manually, click on the button to stop inside the VI but after doing that it moves to the cae of waiting.  Also, I noticed that you have a constant wired up to the judgment of the outside loop while. This isn't really a good idea because it forces you to use the button abandon.  The button abandon does not stop correctly the VI and could cause other problems.  I suggest you to have a stop button on the front panel somewhere to allow the judgment of the user of VI.

• HP LaserJet Pro M127fn MFP: Automatic document feeder does not detect documents loaded on it

  Hello

  I use all of this in one previous machine a few months. Since the last two weeks than its automatic document feeder is not detect documents loaded on it, while it is perfectly flat scanner scanning and printing as well. This machine is connected via a usb cable. I tried all the troubleshooting options available including resetting the printer, cleaning ADF etc etc sensors I also tried the update the bios of the printer, but it does not work for me and feeder is constantly unable to detect documents loaded on it. I searched the whole forum but did not find any message an answer fast and good, therefore, will be highly appreciated in this regard. Thank you

  Hey @Mohsan_IT,

  Welcome to the Forums of HP Support!

  I would like to help you today to address the issue of automatic documents feeder sensor you encounter on your HP LaserJet Pro MFP M127fn. Please include all the troubleshooting steps that you received before you reach out for support. Right now, you have completed all the troubleshooting steps supported in your efforts to solve this problem. If you want to confirm that everything was done correctly, please see the following two positions:

  • Can not copy or scan of FDA (autofeed) on LaserJet 127fn MFP
  • ADF works does not in all new Pro LaserJet MFP M127-M128

  All steps in the discussions that I provided above must be made without success, then the last step would be to perform the programming reset NVRAM on your printer. Now I will send you a private Message with instructions on how to reset the NVRAM. Please check your private Messages for instructions.

  Good luck!

• Titles/transparency/alpha on DPX sequence does not work

  Running CC 2014 and 2015 when I try to put a title first, PSD or even another DPX sequence at 50% opacity on a DPX sequence it turns the screen black. Anyone run into this before?

  Windows 7 x 64 machine. Can be done all this in AE, fine, but for some reason, that it does not work at first and I had really no dynamic link rather the entire film of AE make...

  I've seen similar to the side before mac strangeness.  Out of curiosity, what resolution do you work in?  Also, what format to preview is the sequence on?  Maybe try to change the format to look at something different.  When this happened to me on the side of mac, my preview format has been in mpeg I-frame.  When I changed to ProRes the problem disappeared.  I was wondering if there is something to do in this area.

• Imported sequence does not pick up changes to the Original

  When I use sequences nested with a project, any changes made to the original sequence is automatically reflected where it is embedded/included.

  For example, within a project, I have a sequence called "soccer". I understand not (NEST) this sequence in another sequence called "seq1".

  If I make changes to the "soccer", "seq1" automatically resumes to these changes (even if changes in the duration of "soccer" are NOT automatically picked up by "seq1", which is really annoying, but that's a topic for another day).

  Then, I created a new project and imported the sequences. This new project was "soccer" and "seq1" and everything worked very well.

  However, when I made changes to the "soccer", I was surprised to learn that although these changes was taken over by "seq1" in the original draft, they were NOT taken over by "seq1" in the new draft.

  In other words, it seemed that the import function makes a copy of the sequences from other projects, but this is a read-only snapshot... future changes to the original sequence are not reflected in the project in which they were imported. Which seems strange since it kind of goes against the idea of sequences. At the very least, it seems inconsistent.

  I do something wrong, or is that just how things work? Is it possible to obtain sequences imported to update without re - import?

  Heya Ed:

  When importing, the sequences of a project become sequences of project B (as if they had always been part of the project B initially).  So, project B is never look at a project for changes.

  This seems like a good feature request (feature request/Bug Report Form).  It could be 'Live nesting' or 'Live project Liaison.  I guess that's something that Adobe could be implemented via dynamic links.

  Or, if nothing else, a "sequence with other project sequence replace" type feature to speed up the process.

  Although, for example, it could become difficult.  Expect changes in project B is displayed in the project (in other words, be a reciprocity)?

  It might be more efficient to have the behavior of Final Cut Pro 1.25 7.0.3 was: open several project files at once and copy / paste sequences between projects (as well as bins, Master Clips, Clips of affiliation, subclips, titles, markers, etc.).

  -Warren

• Unique automatic numbering, need full page for book counter

  
  I have searched all over the Internet.

  I am trying to add a variable that would make a total number of pages of the complete document... While it is not unusual for a request, the book is not a continuous numbering system.

  For my cover, I need a total number of pages that make up the book. However, each chapter has its own set of numbering.

  For example:

  Cover page - 1

  Table of contents - 2 pages

  When the generation of this chapter page number would be under numbering, using the "first Page #: 1 Format: (xi) novel.

  Chapter A - this has total 10 pages, but the page numbers are a supplement to a previous edition and would be pages 13-23. When the generation of this chapter page number would be under numbering, using the "first Page #: 13 Format: digital.

  Chapter B - has 11 pages total, as above, it would begin on page 40.  Generation of this chapter page numbers would be under numbering, using the "first Page #: Format 40: digital.

  If I add up the total number of pages in this document, it would be total 24 pages.

  I need a way to count each section and add a variable to the coverage that would say something like 'this document contains 24 additional pages for document XYZ' where 24 would be a single variable that would change when more pages are added to the complementary document.

  Find out the number of pages <$lastpagenum>variable. Insert your last page (or use an invisible color specified using your point of view of color) and then refer it to your cover page.

• Bullets and numbers appearing does not in WebHelp

  Sorry if this is a repeat. Other posts on this forum do not appear to solve this problem.

  I can not get the bullets or numbers to display in my WebHelp lists.  Bullets and numbers appear fine in HTML help, and they appear even in the RoboHelp project correctly. They just do not appear in the WebHelp displayed in Explorer or Firefox.

  The content was written in FrameMaker. Selecting AutoNumber convert to HTML format works very well for CHM, but nothing appears in WebHelp. I tired selecting convert AutoNumber to text and bullets and numbers to appear in Firefox, but wingdings displayed in Explorer.

  All appears well in RoboHelp, should I assume that there is something on the WebHelp window which interferes with my lists?

  The lists are at several levels. I use RoboHelp 8.0.2.208 (TCS2) / Windows XP, SP3.

  Since you talked about the issue with the Wingdings font, I guess that ' sn step number "character style is mapped to BulletSymbol character style (in fmstyles.css) that uses fonts Wingdings.»» (Please check in the settings of Conversion dialog box)

  Since the Wingdings policy is issued, the symbol for chip comes from family Wingdings seen in Internet Explorer. However, as Firefox does not correctly handle the Wingdings, a normal character is displayed in place of an a Wingdings.

  Where the Wingdings characters are not necessary, it is recommended to change either the style BulletSymbol to use other fonts or map "sn number of the step" style to the source. In addition, the option "Convert to text" seems to meet your requirement. Thus, it is recommended to use this particular configuration for the paragraph style "b ball.

  I hope that solves your problem. Please let us know if you have any other questions or encounter you more problems.

  MILIN

• The Oracle optimizer automatic statistical work does not run after full import

  Hi all
  
  I did a full import in our QA database, import was successful, but GATHER_STATS_JOB does not work after sep 18 2010 if its activation and on demand, I question last_analyzed table to check and confirmed that he has not run after sep18, 2010.
  
  See below for the output
  
  OWNER JOB_NAME HIS STATE START_DATE END_DATE LAST_START_DATE NEXT_RUN_D
  ------------ ------------------------------ ----- --------------- ---------- ---------- ------------------- ----------
  SYS TRUE REGULAR GATHER_STATS_JOB 2010-09-18 06:00:02
  
  
  Collection of statistics work defined automatic optimizer Oracle
  
  =======
  
  SQL > select JOB_NAME, STATUS, OWNER, REQ_START_DATE,.
  TO_CHAR (ACTUAL_START_DATE, ' dd-mm-yyyy HH24:MI:SS) ACTUAL_START_DATE, RUN_DURATION
  of dba_scheduler_job_run_details where
  job_name = order of 'GATHER_STATS_JOB' by ACTUAL_START_DATE asc; 2 3 4
  
  OWNER JOB_NAME STATUS REQ_START_DATE ACTUAL_START_DATE
  ------------ ------------------------------ ------------ ------------------------------ ------------------------------
  RUN_DURATION
  --------------------
  SYS GATHER_STATS_JOB MANAGED 16/09/2010 22:00
  + 000 00:00:22
  
  SYS GATHER_STATS_JOB SUCCEEDED 2010-09-17 22:00:02
  + 000 00:00:18
  
  SYS GATHER_STATS_JOB SUCCEEDED 2010-09-18 06:00:02
  + 000 00:00:26
  
  
  What could be the reason for the GATHER_STATS_JOB job does not although his game to automotive
  
  SQL > select dbms_stats.get_param ('AUTOSTATS_TARGET') of double;
  
  DBMS_STATS. GET_PARAM ('AUTOSTATS_TARGET')
  ------------------------------------------------------------------------------------------------------------------------
  Auto
  
  Someone has this kind of experience, please share
  Apprecitate your answers
  
  Concerning
  SRH

  ? So basically you're saying is if none of the tables are changed then GATHER_STATS_JOB will not work, but I see tables are updated again the task does not run. I did > dba_scheduler_jobs request and the State of employment are true and regular. Please see my previous post on the output

  Am I missing something here, I get some parameters parameters

  So basically you are saying is if none of the tables are changed then GATHER_STATS_JOB will not work.

  GATHER_STATS_JOB will take place, and if there is no table in which there is a 10% change in the data, it will bring together statistics on this table. If no data in the table have changes less than 10 percent, it will bring together not statistics.

  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14211/stats.htm#i41282

  I hope this helps.

  -André

• Numbers - files does not

  After the update to iOS 9.3.3 my numbers is not able to open my documents. It kept loading and select the file does not answer.

  I deleted the numbers and re - install on App Store, after which my files stored in iCloud appears also not in number. Although I have activate iCloud.

  I connected my Mac Book Air Safari iCloud, I am able to see and edit my files of numbers. But they do not appear on my iPhone 6 s +. Pages and Keynote is correct and work without any problem.

  Try the settings > numbers > use iCloud > Off and then turn it back on.

  TT2

• EL Capitan automatic date time does not work

  People

  I use an El Capitan 10.11.5 MacBook Air version.

  I noticed that the data and time does not work even though it was set to auto to time.asia.apple.com.

  I ran these commands on a terminal

  $ping-c 5 time.asia.apple.com

  Ping: impossible to solve the time.asia.apple.com: Unknown host

  $ping-c 5 time.nist.gov

  PING ntp1.glb.nist.gov (64.113.32.5): 56 bytes

  64 bytes from 64.113.32.5: icmp_seq = 0 ttl = time 44 = 386,629 ms

  64 bytes from 64.113.32.5: icmp_seq = 1 ttl = time 44 = 307,532 ms

  tell me ping works but not for the server ntp - time.asia.apple.com

  $nslookup time.asia.apple.com

  Server: 192.168.1.254 address: 192.168.1.254 #53

  Non-authoritative answer: time.asia.apple.com canonical name = time - ios.g.aaplimg.com.

  time - ios.g.aaplimg.com canonical name = site time.apple.com.

  Site Time.Apple.com canonical name = time - osx.g.aaplimg.com

  $cat /etc/ntp.conf

  Server time.asia.apple.com.

  $ ntpq Pei

  No returned ID association

  Please, back up all data.

  Open the window of network preferences, if necessary, by clicking on the padlock icon in the lower left corner and entering your password. Cllck advanced, open the DNS tab and change the addresses of the servers as follows:

  8.8.8.8

  8.8.4.4

  It's Google DNS. Click OK, and then apply.

  In Safari, select

  ▹ Safari preferences... ▹ Confidentiality ▹ Remove All site data

  and confirm. If you use another browser, clear the cache memory. Test. Any difference?

  Notes:

  1. If you lose Internet access after the above change is made to your network settings, remove the Google servers in the network preferences pane, then click on the TCP/IP tab, then click on renew the DHCP lease. That should restore the original DNS settings; otherwise restore them yourself. Remember that you must click on apply so that the changes take effect.

  2. I do not use Google DNS myself, but I tested it, and I do not recommend it or any other provider DNS; the addresses of the servers are only available for testing purposes. There may be privacy and technical issues involved in the use of this service, that you should personally study before deciding whether to retain the settings. Other public DNS services exist.

• Facebook, Gmail and MétéoMédia works does not for me with the last update, even in safe mode

  That pretty much sums up it. Since yesterday, with the most recent update, firefox does not display correctly these sites. Someone else posted a question similar to this topic. It has been marked as resolved, but there is no solution posted. Here's his question: https://support.mozilla.org/en-US/questions/963125 I have the same problem as him with fb. In addition to the problem with fb, Gmail doesn't end loading. And MétéoMédia do not display the weather forecast. I'm sure that many other sites are affected as well.

  All sites work properly in Seamonkey, which I use once again, now. I went to oldapps download v. 22 of ff, but whatever the most recent update changed only came when I installed v.22. The problem persists. I could uninstall it completely and then new installation v.22, I guess, but I'm afraid that my browsing history, sessions, passwords, etc., would be affected, and I don't want to find all the files and support first. It's a hassle. Since the sites work in Seamonkey, I'm guessing that's not the fact that I have updated flash at the same time. I don't know how much these sites use flash, either. But if it's a problem of flash, I tell myself I should have the same problem in Seamonkey, and I did not.

  I wish that you guys would have an easy option to restore your updates because it's pretty darn annoying when they cause problems. Usually, they are not lethal problems, however, and the browser still works. Now ff does not work for some sites I use most often.

  Hello

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  __________________________________________________________________

  Also, some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  This will remove not essential info unless you check the box "delete all my personal data too.
  

  Please report back to see if this helped you!

  Thank you.