automatic scale error

Similar Questions

• Automatic loading error on powerup

  Hello

  I have 2943R. In MAX, when I try to select "autoload on powerup" for the firmware, I get the error as in the attachment:

  There was a problem, save the settings for this device. Error code: BFFA86B3

  Is there a way to fix this?

  Thank you

  Ozan

  The USRP RIO always starts automatically at start/restart. The error you see is if you try to change its default value. What is the use case that you are looking to take in charge? Maybe that is already supported?

• How to hit continue automatically when error VISA: (Hex 0xBFFF0016) presents itself?

  Hi all

  I am an experience which interacts with a frequency Agilent generator automatically vary the frequency and read data with a detector, this program works perfectly when I sweep the frequency to great not, so I leave long experiments to do night when I get home, but the next day there is an error that says:

  VISA: VISA (Hex 0xBFFF0016) driver failed to properly close the reference object or session. This could be due to a mistake releasing internal or operating system resources, a network connection has failed, or a lower level driver or OS.

  and give me the chance to continue or stop, if I press on continue, the program keeps works well but sometimes I can't be all the time to be press continues. It is an easy way to cancel this error or say automatically continue if this happens?

  For the nuclear option, you could use the errors clear vi in range of dialogue & User Interface. This is not good. It is best to clear the error only if it's a cause you trouble. But just blindly compensation of errors is as close my eyes and pretend that all is well. It is sometimes.

  I have a serial device that sometimes gives errors, but if I try it will work again. I've created a code to erase and start over up to a defined number of times then give up and returns the following error.

  See the attached "Retry on error.vi.

  

• Automatic Update error code 646

  I got an automatic update of 646 error trying to make updates on security update for

  Microsoft Office Publisher 2007 (KB980470)

  Filter junk e-mail in Outlook 2007 (KB981433)

  2007 Microsoft Office System (KB981715)

  Any ideas?

  Sorry, you have problems getting your patches installed. I have a number of things for you to look at.  First of all, are your Windows Update and the Background Intelligent Transer Services set to Automaticand started . You can check these settings by typing services.msc in the search box of the start menu.

  Sometimes in order to get patches to install correctly, you must perform these tasks manually.

  (1) Download Center to visit Microsoft: http://www.microsoft.com/downloads/en/default.aspx.
  (2) search for each update code that begins with the letters "KB" and followed by a set of numbers (i.e. KB979309).
  3) click on the link for the download and then click on download and run.  You must accept the agreement of contract and then click on continue.
  (4) repeat this process for each download of updates Windows could not install.
  (5) to rerun the update from Microsoft, click find updates.  If all goes well, it will show that you are completely patched.

  If this does not work, try to run the Microsoft OneCare safety scanner.  Sometimes it will solve problems of hidden registry, or erase viruses can prevent the installation of patches: http://onecare.live.com/site/en-us/center/whatsnew.htm. Click full service scan, and then Quick scan (full scan takes a long time to complete). Try the patches.

  See you soon,.

  Barbara

• I am unable to turn on the automatic updates error number 0 x 80070424

  I have one-instsalled Microsoft Securities Essentials and then re-installed the updates have been downloaded and installed but now 2 days later, I can't activate the autmatic updates and receive the error number 0 x 80070424. I tried to turn it back on by going to control panel, system, then automatic updates, but it will not work either.

  Hello Margitscott,

  Thanks for your post.  Take a look at this article for a possible solution to this problem.  Please let us know if it did or did not help to resolve this problem.

  See you soon

• Cannot download Microsoft ATS engine for automatic corrections, error code 0x80004005__

  I am running Windows XP Home Edition.  I recently downloaded and installed Service Pack 3.  I wish I could use the "Fix It".  When I click on one of the links in the Center 'Fix It', I have the ability to run files, followed by a message asking that I accept the agreement to download the Microsoft ATS provider.  Once I accepted, the download starts and ends almost, until I get the following message... "This troubleshooting is not applicable to this computer.  Under him said ' Path: ', which shows a temp folder in my settings the through documents and settings.  Below this "error Code: 0 x 8004005".  Under which is the ' user: ' classified as myself.  Finally, on the bottom line are the words "context: high.  I don't know what all this means.  As stated, I am running Windows XP with Service Pack 3 installed.  How can I get the Microsoft ATS engine for automatic download fixed?  Thank you.

  Hello

  I suggest you to send your query to the fix it Center for assistance.

  Microsoft Fix it Center

  http://social.Microsoft.com/forums/en/fixitcenter/threads

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Trying to expand the space system restore automatic gives error 0x8007007B

  I just had a problem with a driver and wanted to use system restore.  To my great regret, my computer did not a single restore point.  When I went to do it manually, I found that its maximum use was 0% for the restoration of the system in the C drive.  I tried to increase it, but every time I press on apply or ok (an increase of any amount) the following message appears:

  "Could not apply the settings for the following reason: the file name, directory name or volume label syntax is incorrect." (0x8007007B).
  When I press ok, he said: "there was an unexpected error in the property page: (same message as above).»  Please close the property page and try again. »
  I've done the obvious reboot and so on, and it allows me to create a manual restore point, but won't automatically set restore points or be it me to increase the disk quotas.
  Any help would be greatly appreciated.
  (I use a clean install of Windows 7 Professional 32 bit, on a 3 GHz Pentum D, 1 500 gb SATA I partitioned the drive, 4 GB DDR2 and standard components, no software or special equipment).

  Hi sss68,

  Welcome to Microsoft Windows 7 answers Forum!

  The error 0x8007007B occurs when the system is configured to store restore points to a location or a bad way.
  Set the path to the appropriate Windows 7 restore point.
   
  To remove this error , perform the following solution:
  To set the path of the appropriate Windows 7, restore point as follows:
  1. click on start.
  The Start Menu appears.
  2. type sysdm.cpl in the start search box and press .
  The user account control window will prompt you for permission to run the program.
  3. click on continue.
  The System Properties window appears.
  4. click on the System Protection tab.
  5 under automatic restore points, clear all invalid location or duplicate
  6. click on verify drive C: with the Windows Logo
  7. click on apply, and then click Ok
   
  Create a system manually restore point:
  1 open the system by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then click System.
  2. in the left pane, click System Protection if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. click on the tab System Protection and then click on create.
  4. in the System Protection dialog box, type a description, and then click on create.
   
  Follow the document below for additional guidance on the creation of System Restore Point:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-restore-point

  It will be useful.
   
  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum.

• Automatic configuration errors: 29855 ORA, ORA-06553,... at R12.1.3

  Hello:

  Executing automatic configuration as part of the migration of linux he "s failing in the jtfictx.sh script we try to recreate the index but failed with the following @/ap00/immtex/apps/apps_st/appl/jtf/12.0.0/patch/115/sql/jtfiaibu.sql, JTFAPPS

  Connected. DECLARE * ERROR at line 1:

  ORA-29855: an error has occurred in the execution of routine ODCIINDEXCREATE

  ORA-06540: PL/SQL: ORA-06553 compilation error:

  PLS-907: unable to load library CTXSYS unit. DR_DEF (referenced by CTXSYS. DRIPREF)

  ORA-01403: no data available ORA-06512: at "SYS." DBMS_SQL", line 1199

  ORA-06512: at line 37 level

  We already follow with no luck: on 11.2.0.2 CTX_DDL. OPTIMIZE_INDEX fails with error ORA-20000 vacuum (Doc ID 1275100.1) Autoconfig is failure with "DRG-10561: Index Jtf_amv_items_url_ctx is invalid for requested" error (Doc ID 1334405.1()

  Thanks and regards.

  Please log an SR for that matter.

  Thank you

  Hussein

• Automatic formatting error

  For some reason, put AutoFormat keeps screwing up the code I have, but is not well formatted. Even if the code compiles perfectly without error or output errors. Can help a point of what the problem is?

  package

  {

  import flash.display. *;

  import flash.text. *;

  import flash.events. *;

  import flash.events.KeyboardEvent;

  flash.ui import. *;

  import flash.utils. *;

  import flash.geom. *;

  flash.net import. *;

  import flash.media.Sound;

  import flash.media.SoundTransform;

  import flash.media.SoundChannel;

  import flash.net.URLRequest;

  Import 12345678910111213import;

  import flash.display.Sprite;

  import flash.events.Event;

  import flash.utils.Timer;

  import flash.events.TimerEvent;

  SerializableAttribute public class Main extends Sprite

  {

  var Hero = new Character();

  platforms of var = new Platforms();

  var nDir:int;

  var nDirUpDown:int;

  var tmrHitTest:Timer = new Timer (35);

  var tmrCurrentStage:Timer = new Timer (35);

  public void Main()

  {

  addChild (Hero);

  addChild (platforms);

  Check if the left key has been released;

  stage.addEventListener (KeyboardEvent.KEY_UP, keyUpHandlerLeft);

  Check if the right key has been released;

  stage.addEventListener (KeyboardEvent.KEY_UP, keyUpHandlerRight);

  stage.addEventListener (KeyboardEvent.KEY_DOWN, mover);

  stage.addEventListener (KeyboardEvent.KEY_DOWN, moverUpDown);

  stage.addEventListener (MouseEvent.CLICK, Clicking);

  tmrHitTest.addEventListener ("timer", timerHitTest);

  tmrHitTest.start ();

  tmrCurrentStage.addEventListener ("timer", timerCurrentStage);

  tmrCurrentStage.start ();

  the constructor code

  }

  public void Clicking(e:MouseEvent):void

  {

  platforms.bClicked = true;

  }

  public void mover(event:KeyboardEvent)

  {

  nDir = event.keyCode;

  If (nDir == 37 | nDir == 37 & & nDirUpDown == 32)

  {/ / left}

  Hero.bLeftKeyDown = true;

  }

  ElseIf (nDir == 39 | nDir == 39 & & nDirUpDown == 32)

  {/ / right}

  Hero.bRightKeyDown = true;

  }

  }

  function timerCurrentStage(eventArgs:TimerEvent)

  {

  If (Platforms. CurrentStage == 1) {}

  platforms. LevelOne.GenerateLevel ();

  platforms. CurrentStage = 0;

  } else if (platforms. CurrentStage == 2) {}

  platforms. LevelTwo.GenerateLevel ();

  platforms. CurrentStage = 0;

  }

  }

  function timerHitTest(eventArgs:TimerEvent)

  {

  If (platforms. LevelOne.TouchingGround (Hero.HeroGroundTouch))

  {

  Hero.bTouchingGround = true;

  Hero.Vy = 0;

  } else if (platforms. {LevelOne.TouchingRoof (Hero.HeroRoofTouch))}

  } else {}

  Hero.bTouchingGround = false;

  }

  }

  function keyUpHandlerLeft(event:KeyboardEvent)

  {

  If (event.keyCode is 37)

  {

  Hero.bLeftKeyDown = false;

  }

  }

  function keyUpHandlerRight(event:KeyboardEvent)

  {

  If (event.keyCode is 39)

  {

  Hero.bRightKeyDown = false;

  }

  }

  private void moverUpDown(event:KeyboardEvent)

  {

  nDirUpDown = event.keyCode;

  If (nDirUpDown is 32)

  {/ / Jump}

  If (Hero.bDownKeyDown is false)

  {

  If (Hero.bTouchingGround is true)

  {

  trace ("Jump");

  Hero.Vy = - 20;

  Hero.bTouchingGround = false;

  }

  }

  }

  }

  function keyUpHandlerDown(event:KeyboardEvent)

  {

  If (event.keyCode is 40)

  {

  Hero.bDownKeyDown = false;

  }

  }

  }

  }

  The formatting is going nuts because the class is closed immediately after the constructor, and a semicolon is added:

  

  Permanently eliminate it.

  Try the suggestion to correct the syntax of the methods and properties of the class, making sure that you specify a type and one on each, as shown above.

  When I copy your OP code and automatic formatting it, I get this back, which is correct (the lack of scope/type and adding in extra line returns usual forum, ignore those):

  package

  {

  import flash.display. *;

  import flash.text. *;

  import flash.events. *;

  import flash.events.KeyboardEvent;

  flash.ui import. *;

  import flash.utils. *;

  import flash.geom. *;

  flash.net import. *;

  import flash.media.Sound;

  import flash.media.SoundTransform;

  import flash.media.SoundChannel;

  import flash.net.URLRequest;

  Import 12345678910111213import;

  import flash.display.Sprite;

  import flash.events.Event;

  import flash.utils.Timer;

  import flash.events.TimerEvent;

  SerializableAttribute public class Main extends Sprite

  {

  var Hero = new character;

  var platform = new platforms;

  var nDir:int;

  var nDirUpDown:int;

  var tmrHitTest:Timer = new Timer (35);

  var tmrCurrentStage:Timer = new Timer (35);

  public void Main()

  {

  addChild (Hero);

  addChild (platforms);

  Check if the left key has been released;

  stage.addEventListener (KeyboardEvent.KEY_UP, keyUpHandlerLeft);

  Check if the right key has been released;

  stage.addEventListener (KeyboardEvent.KEY_UP, keyUpHandlerRight);

  stage.addEventListener (KeyboardEvent.KEY_DOWN, mover);

  stage.addEventListener (KeyboardEvent.KEY_DOWN, moverUpDown);

  stage.addEventListener (MouseEvent.CLICK, Clicking);

  tmrHitTest.addEventListener ("timer", timerHitTest);

  tmrHitTest.start ();

  tmrCurrentStage.addEventListener ("timer", timerCurrentStage);

  tmrCurrentStage.start ();

  the constructor code

  }

  public void Clicking(e:MouseEvent):void

  {

  platforms.bClicked = true;

  }

  public void mover(event:KeyboardEvent)

  {

  nDir = event.keyCode;

  If (((nDir == 37): nDir == 37 & nDirUpDown == 32))

  {/ / left}

  Hero.bLeftKeyDown = true;

  }

  ElseIf (((nDir == 39): nDir == 39 & nDirUpDown == 32))

  {/ / right}

  Hero.bRightKeyDown = true;

  }

  }

  function timerCurrentStage(eventArgs:TimerEvent)

  {

  If (platforms. CurrentStage == 1)

  {

  platforms. LevelOne.GenerateLevel ();

  platforms. CurrentStage = 0;

  }

  ElseIf (platforms. CurrentStage == 2)

  {

  platforms. LevelTwo.GenerateLevel ();

  platforms. CurrentStage = 0;

  }

  }

  function timerHitTest(eventArgs:TimerEvent)

  {

  If (platforms. LevelOne.TouchingGround (Hero.HeroGroundTouch))

  {

  Hero.bTouchingGround = true;

  Hero.Vy = 0;

  }

  ElseIf (platforms. LevelOne.TouchingRoof (Hero.HeroRoofTouch))

  {

  }

  on the other

  {

  Hero.bTouchingGround = false;

  }

  }

  function keyUpHandlerLeft(event:KeyboardEvent)

  {

  If (event.keyCode is 37)

  {

  Hero.bLeftKeyDown = false;

  }

  }

  function keyUpHandlerRight(event:KeyboardEvent)

  {

  If (event.keyCode is 39)

  {

  Hero.bRightKeyDown = false;

  }

  }

  private void moverUpDown(event:KeyboardEvent)

  {

  nDirUpDown = event.keyCode;

  If ((nDirUpDown is 32))

  {/ / Jump}

  If (Hero.bDownKeyDown is false)

  {

  If (Hero.bTouchingGround is true)

  {

  trace ("Jump");

  Hero.Vy = - 20;

  Hero.bTouchingGround = false;

  }

  }

  }

  }

  function keyUpHandlerDown(event:KeyboardEvent)

  {

  If (event.keyCode is 40)

  {

  Hero.bDownKeyDown = false;

  }

  }

  }

  }

  If the addition of preferences not to do it, take a look at your options in ActionScript and automatic formatting of the code formatting. Take a screenshot of it and post it here. I believe that by default 'Auto close brace' is selected and if your automatic formatting adds this brace according to the manufacturer, something is wrong. You can simply copy the code in the po and paste it into your document is correct to begin with.

  Here are my specific preferences that differ only slightly from more (for example from braces on their own lines):

  

  

• automatic configuration error: afcpctx.sh INSTE8_PRF 1

  Hi Hussein.
  
  I have a question. On a 11.5.9 example, when I run the autoconfig on the application layer, I get the error
  afcpctx.sh INSTE8_PRF 1
  
  As documented, when I look at the log file, I see that the error is PL/SQL being too small buffer.
  I put under patch 3377508 - AFCPCTX. SH FAILS WITH ORA - 6502 WHEN FNDCPUCF RUNS, ran autoconfig and same error.
  I applied patch 3810902 -AUTOCONFIG OUT WITH ERRORS, ran autoconfig and still finished with error.
  
  This time, I get the following:
  
  "Analysis of the context... file.
  Serial number in the context file contains a lower value than the copy of the database.
  
  Cause: The file editing by Oracle Applications Manager context did not complete synchronization of file system. If please correct errors that caused when editing and run this program again. (FILE$ APPL_TOP/admin / < CONTEXT_FILE > .xml)
  Serial number in the context file contains a lower value than the copy of the database.
  
  Cause: The file editing by Oracle Applications Manager context did not complete synchronization of file system. Please correct the errors that caused during editin ".
  
  
  As a backdrop, last night when I tried to stop the application, I got an error saying that there is a corruption with my contextfile. I rebuild it earlier before you run the automatic configuration.
  
  
  Any idea?
  
  Thank you
  
  Felix

  Hi Felix,.

  The cause of the error and the patch are described in the following document.

  Note: 316475.1 - Autoconfig poster with afcpctx.sh Script error
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=316475.1

  Kind regards
  Hussein

• Automatic scale problem

  Hi all.

  I m new to labview and currently using version 8.5! My problem is the following:

  I am connected to a tektronix TDS3034B via GPIB to USB cable. I used 'tktds3k single channel waveform acquire example VI' to test and inserts a square wave of 5V to the oscilloscope. I could get the wave in labview, but whenever I change the scale on the oscilloscope it gets reset to the same scale in both devices.

  What I was wondering is, what can I do because when I change the scale on the oscilloscope, the scale changes in labview without resetting the original scale in both devices?

  Thanks in advance for your help.

  
  

• Cannot update by using automatic updates - error Code 0 x 80070424

  Hello, I'm just worried about my computer. It isn't updated anymore as before. I searched for the error code I got here and I tried the solution given for this code. But then, it was impossible to do so since the service Windows Update is not on the list of services. Can anyone help me to restore?

  My computer:
  HP Pavilion Slimline s3580d
  Intel Core 2 Duo 2.6 Ghz
  NVIDIA GeFore 9300GE
  2 GB OF RAM
  Windows Vista Edition Home Premium SP2

  Hi joshjola2008

  Try these steps as well...

  1. open "wordpad."
  2. copy this text (see below) in the "wordpad".
  3 save the file "wordpad" "IEreg.bat" on your desktop and then "double".
  ' Click on ' to launch
  ******************************

  regsvr32 comcat.dll/s
  regsvr32 shdoc401.dll/s
  regsvr32 shdoc401.dll/i/s
  regsvr32 asctrls.ocx/s
  regsvr32 /s of oleaut32.dll
  regsvr32 shdocvw.dll/i/s
  regsvr32 shdocvw.dll/s
  regsvr32 browseui.dll/s
  regsvr32 browseui.dll/i/s
  regsvr32 msrating.dll/s
  regsvr32 mlang.dll /s
  regsvr32 hlink.dll /s
  regsvr32 mshtmled.dll/s
  regsvr32 urlmon.dll/s
  regsvr32 plugin.ocx/s
  regsvr32 sendmail.dll/s
  regsvr32 scrobj.dll/s
  regsvr32 mmefxe.ocx/s
  regsvr32 corpol.dll/s
  regsvr32 jscript.dll/s
  regsvr32 msxml.dll/s
  regsvr32 imgutil.dll/s
  regsvr32 thumbvw.dll/s
  regsvr32 cryptext.dll/s
  regsvr32 rsabase.dll/s
  regsvr32 inseng.dll/s
  regsvr32 iesetup.dll/i/s
  regsvr32 cryptdlg.dll/s
  regsvr32 actxprxy.dll/s
  regsvr32 dispex.dll/s
  regsvr32 occache.dll/s
  regsvr32 occache.dll/i/s
  regsvr32 iepeers.dll/s
  regsvr32 urlmon.dll/i/s
  regsvr32 cdfview.dll/s
  regsvr32 webcheck.dll/s
  regsvr32 mobsync.dll/s
  regsvr32 pngfilt.dll/s
  regsvr32 licmgr10.dll/s
  regsvr32 icmfilter.dll/s
  regsvr32 /s of hhctrl.ocx
  regsvr32 /s c:\windows\system32\inetcfg.dll
  regsvr32 tdc.ocx/s
  regsvr32 MSR2C. DLL/s
  regsvr32 msident.dll/s
  regsvr32 msieftp.dll/s
  regsvr32 xmsconf.ocx/s
  regsvr32 c:\windows\system32\ils.dll/s
  regsvr32 /s c:\windows\system32\msoeacct.dll
  regsvr32 inetcomm.dll /s
  regsvr32 msdxm.ocx /s
  regsvr32 dxmasf.dll/s
  regsvr32 l3codecx.ax/s
  regsvr32 acelpdec.ax/s
  regsvr32 mpg4ds32.ax/s
  regsvr32 voxmsdec.ax/s
  regsvr32 danim.dll/s
  regsvr32 Daxctle.ocx/s
  regsvr32 lmrt.dll/s
  regsvr32 datime.dll/s
  regsvr32 dxtrans.dll/s
  regsvr32 dxtmsft.dll/s
  regsvr32 WEBPOST. DLL/s
  regsvr32 WPWIZDLL. DLL/s
  regsvr32 POSTWPP. DLL/s
  regsvr32 CRSWPP. DLL/s
  regsvr32 FTPWPP. DLL/s
  regsvr32 FPWPP. DLL/s
  regsvr32 WUAPI. DLL/s
  regsvr32 WUAUENG. DLL/s
  regsvr32 ATL DLL/s
  regsvr32 WUCLTUI. DLL/s
  regsvr32 STINKS. DLL/s
  regsvr32 WUWEB. DLL/s
  regsvr32 wshom.ocx/s
  regsvr32 wshext.dll/s
  regsvr32 vbscript.dll/s
  regsvr32 scrrun.dll mstinit.exe/setup/s
  regsvr32 msnsspc.dll/SspcCreateSspiReg/s
  regsvr32 msapsspc.dll/SspcCreateSspiReg/s
  output

  Thank you
  Anthony

• Windows automatic update (error code "0x8007066A")

  original title: automatic Windows Update

  Continuous update, update KB2446708 Windows HELP (with success I now have it 30 times now and are looking for add it again) automatic.

  http://taurarian.MVPs.org/framework/Net_Framework.htm

  You might need the cleaning tool before reinstalling the Framework 4

  Click on the following link to download the .NET Framework cleanup tool:

  http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx
   
  For info http://blogs.msdn.com/b/astebner/archive/2007/03/14/mailbag-what-version-of-the-net-framework-is-included-in-what-version-of-the-os.aspx
   

• Automatic accounting errors

  Hi Experts

  Can you please list me what are the areas that we look for when troubleshooting errors in accounting auto?

  Thank you.

  Hello

  In Auto accounting errors are due to the installer missing or wrong of a rule, this system is not able to produce the appropriate account.

  Try looking at the wrong transactions only and search for carefule in AA rules setup this specific function (cost of labour, income, charge, etc.). You may have found that is missing a value of all of the research, or you have not assigned a rule for all cases of this function, etc.

  Dina

• Automatic configuration error

  Hi all
  
  Version of the APPLICATION - 11.5.10.2
  OS... .Linux
  
  
  When running autoconfig on DBtier I get following error
  ==============================
  
  [AutoConfig error report]
  The following report lists the errors autoconfig met in each
  execution phase. Errors are grouped by directory and by phase.
  The format of the report is:
  < file name > < phase > < eventually return code >
  
  [APPLY PHASE]
  AutoConfig could not successfully run the following scripts:
  Directory: /data/oracle/db/proddb/9.2.0/appsutil/install/PROD_unicos
  adcrobj.sh INSTE8_APPLY 1
  
  ================================================
  
  Please help me how do to trobleshoot.
  
  
  Thank you...

  Salvation;

  You have the hotfix that is mentioned in the notes 415335.1, please confirm

  Respect of
  HELIOS