automatic start of Tunnel VPN ASA.
I was wondering if anyone had ideas for a problem I'm having.
I had previously configured a router IOS which had a dynamic IP address from the ISP vpn to PIX headquarters. I got the PIX configured to address generic isakmp/crypto peer so he did not care what peer IP address attempted vpn handshake with him. But, in order to show the VPN, to be launched on the side IOS router because of the dynamics to static vpn LAN is configured.
The problem I had initially was behind the IOS router on its side LAN I had cameras that has not generated any traffic by themselves, so the VPN is not never come to the top and how I had the time that was on the IOS router I set an IP address of the fake NTP server that was in the subnet through the VPN on the side of PIX and then source the The IOS NTP ethernet router so it would automatically take place of the tunnel by himself.
Now we are trying to implement and ASA instead of and router IOS and the NTP commands are there including the source option that can be 'inside' or 'outside' but it does not work as did the IOS router. I also tried to create a kind of SNMP or SLA with some source options but who did not bring to the top of the tunnel either. It's as if he's not he sourcing from an IP address or interface that looks like to the interesting traffic.
I wonder if it's something to with the fact that the ASA, we set up we did put the IP addresses on the local VIRTUAL network interfaces and then put the Ethernet Interfaces in the vlan access switchport special instead of putting on the Interfaces Ethernet IP addresses themselves.
Someone has any ideas in order to automatically initialize the vpn tunnel to the ASA configuration?
You may need to add outside of ASA interface as interesting traffic. That is usually when you want a remote ASA/pix syslog to a local syslog server. I know you do ntp, but should be the same. Looks like the same problem here. In any case it is worth it.
Here is the doc for pix but it is similar to the ASA.
Tags: Cisco Security
Similar Questions
-
Tunnel VPN ASA 5520 (DMZ + INSIDE) destined for OUTSIDE
I can't find any reference to anywhere else.
We have an ASA 5520 to our site HQ (inside the network) with several regional subnets on the DMZ interface.
We need connectivity VPN Site to Site between the INSIDE and a remote control on the OUTSIDE of the site, as well as between the DMZ subnets and even outside the site. The interface from the OUTSIDE of the SAA must be local VPN endpoint for all tunnels.
I created a S2S VPN between the INSIDE and the OUTSIDE site and it works great.
When I create a VPN S2S tunnel between a site of DMZ and even outside the site (using the same settings the and remote, but with a cryptomap different because the local subnet (DMZ) is different from the other inside the subnet, the traffic gets the mapping (show crypto isakmp his) to the same cryptomap that was created for the access to the tunnel from the OUTSIDE) , instead of to the new cryptomap, so remote endpoint deletes it, and traffic also causes SPI incorrect of for the remote endpoint, which makes the original INTERIOR outside OF THE VPN tunnel to fall from time to time.
Is this a bug?
I also did a local S2S VPN tunnel configuration test of networks as everything INSIDE and the DMZ. With the help of the wizard VPN S2S leads ASA only to create a NAT rule exempted for the subnet on the INSIDE interface. Can I manually create another tax-exempt NAT rule to the side of the DMZ and use this a S2S tunnel to connect sites inside and DMZ to the remote OFF-SITE in a connection profile?
I'm building a Rube Goldberg?
Thank you
George
Hi George,.
It seems you have a situation overlapping it, are you sure that subnets inside did not overlap with the networks from the DMZ? A package tracer could clarify wha that the ASA is actually sending.
In addition, you can merge the two interfaces on the same card encryption if you wish, just make sure that the NAT is configured correctly. For example; Source NAT (all, outside) static...
It may be useful
-Randy-
-
Tunnel VPN site to Site with 2 routers Cisco 1921
Hi all
So OK, I'm stumped. I create much s2s vpn tunnels before, but this one I just can't go there. It's just a tunnel VPN Site to Site simple using pre-shared keys. I would appreciate it if someone could take a look at our configs for both routers running and provide a comment. This is the configuration for both routers running. Thank you!
Router 1
=======
Current configuration: 4009 bytes
!
! Last configuration change at 19:01:31 UTC Wednesday, February 22, 2012 by asiuser
!
version 15.0
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
SJWHS-RTRSJ host name
!
boot-start-marker
boot-end-marker
!
!
No aaa new-model
!
!
!
!
No ipv6 cef
IP source-route
IP cef
!
!
DHCP excluded-address 192.168.200.1 IP 192.168.200.110
DHCP excluded-address IP 192.168.200.200 192.168.200.255
!
IP dhcp POOL SJWHS pool
network 192.168.200.0 255.255.255.0
default router 192.168.200.1
10.10.2.1 DNS server 10.10.2.2
!
!
no ip domain search
IP-name 10.10.2.1 Server
IP-name 10.10.2.2 Server
!
Authenticated MultiLink bundle-name Panel
!
!
Crypto pki trustpoint TP-self-signed-236038042
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 236038042
revocation checking no
rsakeypair TP-self-signed-236038042
!
!
TP-self-signed-236038042 crypto pki certificate chain
certificate self-signed 01
30820241 308201AA A0030201 02020101 300 D 0609 2A 864886 F70D0101 04050030
8B1E638A EC
quit smoking
license udi pid xxxxxxxxxx sn CISCO1921/K9
!
!
!
redundancy
!
!
!
!
crypto ISAKMP policy 10
md5 hash
preshared authentication
ISAKMP crypto key presharedkey address 112.221.44.18
!
!
Crypto ipsec transform-set esp-3des esp-md5-hmac IPSecTransformSet1
!
map CryptoMap1 10 ipsec-isakmp crypto
defined by peer 112.221.44.18
game of transformation-IPSecTransformSet1
match address 100
!
!
!
!
!
interface GigabitEthernet0/0
192.168.200.1 IP address 255.255.255.0
automatic duplex
automatic speed
!
!
interface GigabitEthernet0/1
Description wireless bridge
IP 172.17.1.2 255.255.255.0
automatic duplex
automatic speed
!
!
interface FastEthernet0/0/0
Verizon DSL description for failover of VPN
IP 171.108.63.159 255.255.255.0
automatic duplex
automatic speed
card crypto CryptoMap1
!
!
!
Router eigrp 88
network 172.17.1.0 0.0.0.255
network 192.168.200.0
redistribute static
passive-interface GigabitEthernet0/0
passive-interface FastEthernet0/0/0
!
IP forward-Protocol ND
!
no ip address of the http server
local IP http authentication
IP http secure server
!
IP route 0.0.0.0 0.0.0.0 172.17.1.1
IP route 112.221.44.18 255.255.255.255 171.108.63.1
!
access-list 100 permit ip 192.168.200.0 0.0.0.255 10.10.0.0 0.0.255.255
!
!
!
!
!
!
control plan
!
!
!
Line con 0
Synchronous recording
local connection
line to 0
line vty 0 4
exec-timeout 30 0
Synchronous recording
local connection
transport input telnet ssh
!
Scheduler allocate 20000 1000
end
=======
Router 2
=======
Current configuration: 3719 bytes
!
! Last configuration change at 18:52:54 UTC Wednesday, February 22, 2012 by asiuser
!
version 15.0
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
SJWHS-RTRHQ host name
!
boot-start-marker
boot-end-marker
!
logging buffered 1000000
!
No aaa new-model
!
!
!
!
No ipv6 cef
IP source-route
IP cef
!
!
!
!
no ip domain search
!
Authenticated MultiLink bundle-name Panel
!
!
Crypto pki trustpoint TP-self-signed-3490164941
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 3490164941
revocation checking no
rsakeypair TP-self-signed-3490164941
!
!
TP-self-signed-3490164941 crypto pki certificate chain
certificate self-signed 01
30820243 308201AC A0030201 02020101 300 D 0609 2A 864886 F70D0101 04050030
2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30
EA1455E2 F061AA
quit smoking
license udi pid xxxxxxxxxx sn CISCO1921/K9
!
!
!
redundancy
!
!
!
!
crypto ISAKMP policy 10
md5 hash
preshared authentication
ISAKMP crypto key presharedkey address 171.108.63.159
!
86400 seconds, duration of life crypto ipsec security association
!
Crypto ipsec transform-set esp-3des esp-md5-hmac IPSecTransformSet1
!
map CryptoMap1 10 ipsec-isakmp crypto
defined by peer 171.108.63.159
game of transformation-IPSecTransformSet1
match address 100
!
!
!
!
!
interface GigabitEthernet0/0
no ip address
automatic duplex
automatic speed
!
!
interface GigabitEthernet0/0.1
encapsulation dot1Q 1 native
IP 10.10.1.6 255.255.0.0
!
interface GigabitEthernet0/1
IP 172.17.1.1 255.255.255.0
automatic duplex
automatic speed
!
!
interface FastEthernet0/0/0
IP 112.221.44.18 255.255.255.248
automatic duplex
automatic speed
card crypto CryptoMap1
!
!
!
Router eigrp 88
Network 10.10.0.0 0.0.255.255
network 172.17.1.0 0.0.0.255
redistribute static
passive-interface GigabitEthernet0/0
passive-interface GigabitEthernet0/0.1
!
IP forward-Protocol ND
!
no ip address of the http server
local IP http authentication
IP http secure server
!
IP route 0.0.0.0 0.0.0.0 112.221.44.17
!
access-list 100 permit ip 10.10.0.0 0.0.255.255 192.168.200.0 0.0.0.255
!
!
!
!
!
!
control plan
!
!
!
Line con 0
Synchronous recording
local connection
line to 0
line vty 0 4
exec-timeout 30 0
Synchronous recording
local connection
transport input telnet ssh
!
Scheduler allocate 20000 1000
end
When the GRE tunnel carries your traffic to private ip range, your ACL must contain address of the host of point to point the IPSec tunnel.
Since then, both routers are running EIGRP in the corporate network, let the EIGRP Exchange routes via GRE tunnel, which is a good practice, rather than push the ip ranges private individual through the IPSec tunnel.
Let me know, if that's what you want.
Thank you
-
Anyconnect installation will automatically start
The following command will automatically start the download AnyConnect client on vistingloging in the page of vpn for examle 'vpn.company.com '?
If this is not the case, what would be the best way to streamline the process. We do not use clientless vpn, so he didn't need the page other than for the client download.
SVC request to enable default svc
Hi Matthew,
In fact this command works for this, you will need the AnyConnect PKG uploaded to the ASA.
If you have not set up any bookmarks or any use of the WebVPN clientless, it will automatically ask the download of the AnyConnect, and Yes, you can use the FULL domain name to access on a browser.
Configure authentication to least best practices.
Please note and mark it as correct the post if this helped you!
David Castro,
Kind regards
-
Problem VPN ASA 5505 8.3 (1) a site
Hello
My problem is with VPN site-to-site. It's between ASA5505 8.3 (1) and Pix 501 6.3 (5). The tunnel is created between them and it's good, here you have the results to see the crypto ipsec's and isakmp his
ciscoasa # sh crypto isakmp his
ITS enabled: 1
Generate a new key SA: 0 (a tunnel report Active 1 and 1 to generate a new key during the generate a new key)
Total SA IKE: 1
1 peer IKE: 91.X.X.57
Type: L2L role: initiator
Generate a new key: no State: MM_ACTIVE
ciscoasa # sh crypto ipsec his
Interface: outside
Tag crypto map: outside_map, seq num: 1, local addr: 79.X.X.2
list of access vpn extended permit ip 192.168.10.0 255.255.255.0 192.168.11.0 255.255.255.0
local ident (addr, mask, prot, port): (192.168.10.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (192.168.11.0/255.255.255.0/0/0)
current_peer: 91.X.X.57
#pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
#pkts decaps: 3757, #pkts decrypt: 3757, #pkts check: 3757
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, comp #pkts failed: 0, #pkts Dang failed: 0
success #frag before: 0, failures before #frag: 0, #fragments created: 0
Sent #PMTUs: 0, #PMTUs rcvd: 0, reassembly: 20th century / of frgs #decapsulated: 0
#send errors: 0, #recv errors: 0
local crypto endpt. : 79.X.X.2/0, remote Start crypto. : 91.X.X.57/0
Path mtu 1500, fresh ipsec generals 74, media, mtu 1500
current outbound SPI: F1C2FD46
current inbound SPI: 1BCF8C49
SAS of the esp on arrival:
SPI: 0x1BCF8C49 (466586697)
transform: aes-256-esp esp-md5-hmac no compression
running parameters = {L2L, Tunnel}
slot: 0, id_conn: 376832, crypto-card: outside_map
calendar of his: service life remaining (KB/s) key: (4373665/20348)
Size IV: 16 bytes
support for replay detection: Y
Anti-replay bitmap:
0xFFFFFFFF to 0xFFFFFFFF
outgoing esp sas:
SPI: 0xF1C2FD46 (4056087878)
transform: aes-256-esp esp-md5-hmac no compression
running parameters = {L2L, Tunnel}
slot: 0, id_conn: 376832, crypto-card: outside_map
calendar of his: service life remaining (KB/s) key: (4374000/20348)
Size IV: 16 bytes
support for replay detection: Y
Anti-replay bitmap:
0x00000000 0x00000001
But the problem is, as you can see in a show crypto ipsec sa, there is now traffic to a remote network of ASA
#pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
I have a single device on the remote network sends data to a sysloger on the local network and it works fine, all received messages but not other way to traffic.
To make sure that I go see the Nat and packet - trace entry inside tcp 192.168.10.7 1024 192.168.11.250 80 and looks like SHEEP works very well and traffic is allowed, but still once anything gets into the tunnel of local network
Results
ciscoasa # sh nat
Manual NAT policies (Section 1)
1 (one) to (all) source static sheep sheep sheep destination static sheep
translate_hits = 0, untranslate_hits = 38770
2 (inside) for the service public static obj - the source (on the outside) TCP1433 TCP1433 79.X.X.5 192.168.10.7
translate_hits = 0, untranslate_hits = 95
3 (inside) to the source (external) static obj - 192.168.10.7 interface service zzz zzz
translate_hits = 0, untranslate_hits = 19
4 (inside) of the (whole) source static obj - 10.0.0.0 obj - 10.0.0.0 destination static obj - 192.168.2.0 obj - 192.168.2.0
translate_hits = 17, untranslate_hits = 0
5 (inside) of the (whole) source static obj - obj - static 192.168.10.0 192.168.10.0 obj - obj-destination 10.1.1.1 10.1.1.1
translate_hits = 134, untranslate_hits = 0
6 (inside) to the (whole) source static obj - 10.1.1.1 obj - 10.1.1.1 destination static obj - 192.168.10.0 obj - 192.168.10.0
translate_hits = 0, untranslate_hits = 0
7 (inside) of the (whole) source static obj - 192.168.0.0 obj - 192.168.0.0 destination static obj - 192.168.2.0 obj - 192.168.2.0
translate_hits = 172, untranslate_hits = 53
Auto NAT policies (Section 2)
1 (inside) (outside) source static obj - 192.168.10.3 service TCP 3389 3389 79.X.X.5
translate_hits = 12, untranslate_hits = 4823
2 (inside) (outside) source static obj - 192.168.10.5 79.X.X.3 DNS
translate_hits = 341869, untranslate_hits = 41531
3 (inside) (outside) source static obj - 192.168.10.3 - 01 79.X.X.5 service TCP 444 444
translate_hits = 0, untranslate_hits = 0
4 (inside) to the source (external) static obj - 192.168.10.7 tcp 3389 3389 service interface
translate_hits = 21, untranslate_hits = 751
5 (inside) (outside) source static obj - 192.168.10.7 - 02 interface tcp 8080 https service
translate_hits = 0, untranslate_hits = 100
6 (inside) (outside) source static obj - 192.168.10.11 79.X.X.5 TCP smtp smtp service
translate_hits = 2, untranslate_hits = 18838
7 (inside) (outside) source static obj - 192.168.10.11 - 01 udp 443 443 service 79.X.X.5
translate_hits = 0, untranslate_hits = 0
8 (inside) (outside) source static obj - 192.168.10.11 - 02 79.X.X.5 tcp https https service
translate_hits = 221, untranslate_hits = 9770
9 (inside) (outside) source static obj - 192.168.10.11 - 03 79.X.X.5 tcp https https service
translate_hits = 0, untranslate_hits = 0
10 (inside) (outside) source static obj - 192.168.10.15 79.X.X.5 service tcp www 81
translate_hits = 0, untranslate_hits = 34
11 (inside) (outside) source static obj - 192.168.10.26 79.X.X.5 service TCP 8080 8080
translate_hits = 9, untranslate_hits = 4407
12 (inside) (outside) source static obj - 192.168.10.26 - 01 79.X.X.5 tcp 8080 www service
translate_hits = 0, untranslate_hits = 578
13 (inside) (outside) source static obj - 192.168.10.220 79.X.X.6 service TCP 3389 3389
translate_hits = 0, untranslate_hits = 41
14 (inside) (outside) source static obj - 192.168.10.220 - 1 79.X.X.6 tcp https https service
translate_hits = 0, untranslate_hits = 3
15 (inside) to the obj_any interface dynamic source (external)
translate_hits = 410005, untranslate_hits = 144489
16 (invited) to dynamic interface of the source (outside) obj_any-01
translate_hits = 19712, untranslate_hits = 4490
ciscoasa # packet - trace entry inside tcp 192.168.10.7 1024 192.168.11.250 80
Phase: 1
Type: UN - NAT
Subtype: static
Result: ALLOW
Config:
NAT (any, any) source static sheep sheep sheep destination static sheep
Additional information:
NAT divert on exit to the outside interface
Untranslate 192.168.11.250/80 to 192.168.11.250/80
Phase: 2
Type: ACCESS-LIST
Subtype: Journal
Result: ALLOW
Config:
Access-group inside_out in interface inside
access-list extended inside_out permit ip 192.168.10.0 255.255.255.0 192.168.11.0 255.255.255.0
Additional information:
Direct flow from returns search rule:
ID = 0xd9886ae8, priority = 13, area = allowed, deny = false
hits = 18503, user_data = 0xd6581290, cs_id = 0 x 0, use_real_addr, flags = 0 x 0 = 0 protocol
IP/ID=192.168.10.0 SRC, mask is 255.255.255.0, port = 0
IP/ID=192.168.11.0 DST, mask is 255.255.255.0, port = 0, dscp = 0 x 0
input_ifc = output_ifc = any to inside,
Phase: 3
Type: IP-OPTIONS
Subtype:
Result: ALLOW
Config:
Additional information:
Direct flow from returns search rule:
ID = 0xd80c87c8, priority = 0, sector = inspect-ip-options, deny = true
hits = 1047092, user_data = 0 x 0, cs_id = 0 x 0, reverse, flags = 0 x 0 = 0 protocol
IP/ID=0.0.0.0 SRC, mask is 0.0.0.0, port = 0
IP/ID=0.0.0.0 DST, mask is 0.0.0.0, port = 0, dscp = 0 x 0
input_ifc = output_ifc = any to inside,
Phase: 4
Type: NAT
Subtype:
Result: ALLOW
Config:
NAT (any, any) source static sheep sheep sheep destination static sheep
Additional information:
Direct flow from returns search rule:
ID = 0xd9859830, priority = 6, area = nat, deny = false
hits = 2107, user_data = 0xd83a9b48, cs_id = 0 x 0, use_real_addr, flags = 0 x 0 = 0 protocol
IP/ID=192.168.10.0 SRC, mask is 255.255.255.0, port = 0
IP/ID=192.168.11.0 DST, mask is 255.255.255.0, port = 0, dscp = 0 x 0
input_ifc = none, output_ifc = any
Phase: 5
Type: HOST-LIMIT
Subtype:
Result: ALLOW
Config:
Additional information:
Direct flow from returns search rule:
ID = 0xd8114d98, priority = 0, domain = host-limit, deny = false
hits = 674350, user_data = 0 x 0, cs_id = 0 x 0, flags = 0 x 0 = 0 protocol
IP/ID=0.0.0.0 SRC, mask is 0.0.0.0, port = 0
IP/ID=0.0.0.0 DST, mask is 0.0.0.0, port = 0, dscp = 0 x 0
input_ifc = output_ifc = any to inside,
Phase: 6
Type: VPN
Subtype: encrypt
Result: ALLOW
Config:
Additional information:
Direct flow from returns search rule:
ID = 0xd83a9960, priority = 70, domain = encrypt, deny = false
hits = 26732, user_data = 0xce165c, cs_id = 0xd83ad0e8, reverse, flags = 0 x 0 = 0 protocol
IP/ID=192.168.10.0 SRC, mask is 255.255.255.0, port = 0
IP/ID=192.168.11.0 DST, mask is 255.255.255.0, port = 0, dscp = 0 x 0
input_ifc = none, output_ifc = external
Phase: 7
Type: NAT
Subtype: rpf check
Result: ALLOW
Config:
NAT (any, any) source static sheep sheep sheep destination static sheep
Additional information:
Direct flow from returns search rule:
ID = 0xd98d1d70, priority = 6, area = nat-reversed, deny = false
hits = 1419, user_data = 0xd83a9b48, cs_id = 0 x 0, use_real_addr, flags = 0 x 0 = 0 protocol
IP/ID=192.168.10.0 SRC, mask is 255.255.255.0, port = 0
IP/ID=192.168.11.0 DST, mask is 255.255.255.0, port = 0, dscp = 0 x 0
input_ifc = none, output_ifc = any
Phase: 8
Type: VPN
Subtype: ipsec-tunnel-flow
Result: ALLOW
Config:
Additional information:
Reverse flow from returns search rule:
ID = 0xd9bda388, priority = 69 = ipsec-tunnel-flow area, deny = false
hits = 486, user_data is 0x13492cc, cs_id = 0 x 0, reverse, flags = 0 x 0 = 0 protocol
IP/ID=192.168.11.0 SRC, mask is 255.255.255.0, port = 0
IP/ID=192.168.10.0 DST, mask is 255.255.255.0, port = 0, dscp = 0 x 0
input_ifc = out, output_ifc = any
Phase: 9
Type: IP-OPTIONS
Subtype:
Result: ALLOW
Config:
Additional information:
Reverse flow from returns search rule:
ID = 0xd8192ab0, priority = 0, sector = inspect-ip-options, deny = true
hits = 1169899, user_data = 0 x 0, cs_id = 0 x 0, reverse, flags = 0 x 0 = 0 protocol
IP/ID=0.0.0.0 SRC, mask is 0.0.0.0, port = 0
IP/ID=0.0.0.0 DST, mask is 0.0.0.0, port = 0, dscp = 0 x 0
input_ifc = out, output_ifc = any
Phase: 10
Type: CREATING STREAMS
Subtype:
Result: ALLOW
Config:
Additional information:
New workflow created with the 1293619 id, package sent to the next module
Information module for forward flow...
snp_fp_tracer_drop
snp_fp_inspect_ip_options
snp_fp_tcp_normalizer
snp_fp_translate
snp_fp_adjacency
snp_fp_encrypt
snp_fp_fragment
snp_ifc_stat
Information for reverse flow...
snp_fp_tracer_drop
snp_fp_inspect_ip_options
snp_fp_ipsec_tunnel_flow
snp_fp_translate
snp_fp_tcp_normalizer
snp_fp_adjacency
snp_fp_fragment
snp_ifc_stat
Result:
input interface: inside
entry status: to the top
entry-line-status: to the top
output interface: outside
the status of the output: to the top
output-line-status: to the top
Action: allow
It is a complete config for ASA
VPN
Network local 192.168.10.0/24
remote network 192.168.11.0/24
Config
:
ASA Version 8.3 (1)
!
ciscoasa hostname
domain.com domain name
activate the password * encrypted
passwd * encrypted
names of
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.10.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP 79.X.X.2 255.255.255.248
!
interface Vlan12
prior to interface Vlan1
nameif comments
security-level 80
192.168.4.1 IP address 255.255.255.0
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
switchport access vlan 2
!
interface Ethernet0/6
!
interface Ethernet0/7
switchport access vlan 12
!
boot system Disk0: / asa831 - k8.bin
passive FTP mode
clock timezone GMT/UTC 0
summer time clock GMT/BDT recurring last Sun Mar 01:00 last Sun Oct 02:00
DNS domain-lookup outside
DNS server-group DefaultDNS
Server name 192.168.10.11
domain.com domain name
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
network object obj - 192.168.0.0
Subnet 192.168.0.0 255.255.0.0
network object obj - 192.168.2.0
Subnet 192.168.2.0 255.255.255.128
network object obj - 10.0.0.0
subnet 10.0.0.0 255.0.0.0
network object obj - 192.168.10.2
host 192.168.10.2
network object obj - 192.168.10.2 - 01
host 192.168.10.2
network object obj - 192.168.10.3
host 192.168.10.3
network object obj - 192.168.10.2 - 02
host 192.168.10.2
network object obj - 192.168.10.2 - 03
host 192.168.10.2
network object obj - 192.168.10.3 - 01
Home 192.168.10.7
network object obj - 192.168.10.5
host 192.168.10.5
newserver network object
Home 192.168.10.7
New SQL Server description
network object obj - 192.168.10.7
Home 192.168.10.7
network of the A_79.X.X.6 object
Home 79.X.X.6
network of the PublicServer_NAT1 object
Home 192.168.10.7
zzz service object
service source eq 1 65535 udp syslog destination range
Syslog description
purpose of the 79.X.X.5 network
Home 79.X.X.5
service of the TCP1433 object
destination service tcp source eq 1433 1 65535 range
Description TCP1433
network object obj - 192.168.10.220
Home 192.168.10.220
network object obj - 192.168.10.220 - 1
Home 192.168.10.220
network object obj - 192.168.10.222
Home 192.168.10.222
network object obj - 192.168.10.2 - 04
host 192.168.10.2
network object obj - 192.168.10.7 - 02
Home 192.168.10.7
network object obj - 192.168.10.11
Home 192.168.10.11
network object obj - 192.168.10.11 - 01
Home 192.168.10.11
network object obj - 192.168.10.11 - 02
Home 192.168.10.11
network object obj - 192.168.10.11 - 03
Home 192.168.10.11
network object obj - 192.168.10.26
Home 192.168.10.26
network object obj - 192.168.10.26 - 01
Home 192.168.10.26
network object obj - 192.168.10.15
Home 192.168.10.15
network object obj - 192.168.10.11 - 04
Home 192.168.10.11
network object obj - 10.1.1.1
host 10.1.1.1
network object obj - 192.168.10.0
192.168.10.0 subnet 255.255.255.0
network object obj - 192.168.10.220 - 2
Home 192.168.10.220
network vpn-local object
192.168.10.0 subnet 255.255.255.0
object network vpn - ru
subnet 192.168.11.0 255.255.255.0
network obj_any object
subnet 0.0.0.0 0.0.0.0
network obj_any-01 object
subnet 0.0.0.0 0.0.0.0
object-group service syslog udp
Service Description syslog group
port-object eq syslog
object-group service udp zzzz
port-object eq syslog
object-group service sss udp
port-object eq syslog
object-group network sheep
object-network 192.168.10.0 255.255.255.0
object-network 192.168.11.0 255.255.255.0
object-network 192.168.3.0 255.255.255.0
outside_all of access allowed any ip an extended list
VPN_splitTunnelAcl list standard access allowed 192.168.0.0 255.255.0.0
VPN_splitTunnelAcl list standard access allowed 10.0.0.0 255.0.0.0
permit inside_nat0_outbound to access extended list ip 192.168.0.0 255.255.0.0 192.168.2.0 255.255.255.128
inside_nat0_outbound to access ip 10.0.0.0 scope list allow 255.0.0.0 192.168.2.0 255.255.255.128
access-list extended inside_out allow ip 192.168.11.0 255.255.255.0 192.168.10.0 255.255.255.0
access-list extended inside_out permit ip 192.168.10.0 255.255.255.0 192.168.11.0 255.255.255.0
scope of the inside_out to the list of permitted any one ip access
inside_out to the access list extended 192.168.11.0 allowed any ip 255.255.255.0
inside_out to the list of access permit tcp host 192.168.10.2 any eq smtp
inside_out to the list of access permit tcp any any eq smtp
access-list extended inside_out allow udp 192.168.10.0 255.255.255.0 host 10.1.1.1
access-list extended inside_out permit udp host 10.1.1.1 192.168.10.0 255.255.255.0
inside_out to the list of allowed extensive access icmp host 192.168.10.7 all
inside_out to the list of allowed extensive access a whole icmp
outside_zzz list of allowed ip extended access any external interface
outside_zzz list extended access permit tcp host 87.X.X.73 host 79.X.X.5 eq 1433
outside_zzz tcp extended access list refuse any host 79.X.X.5 eq 1433
outside_zzz list extended access permitted tcp 207.126.144.0 255.255.240.0 eq 79.X.X.5 the smtp host
outside_zzz tcp extended access list refuse any host 79.X.X.5 eq smtp
outside_zzz access-list extended permit ip any host 79.X.X.5
outside_zzz of access allowed any ip an extended list
permit access list extended ip 192.168.10.0 outside_in 255.255.255.0 192.168.11.0 255.255.255.0
access extensive list ip 192.168.11.0 outside_in allow 255.255.255.0 192.168.10.0 255.255.255.0
access extensive list ip 192.168.11.0 outside_in allow 255.255.255.0 any
outside_in list extended access permit tcp any host 192.168.10.15 eq 81
outside_in list extended access permit ip any host 192.168.10.5
access-list outside_in extended permit ip any host 79.X.X.4
outside_in list extended access permit tcp host 82.X.X.166 host 192.168.10.7 eq 1433
outside_in list extended access permit tcp host 84.X.X.30 host 192.168.10.7 eq 1433
outside_in list extended access tcp refuse any host 192.168.10.7 eq 1433
outside_in list extended access permit tcp any host 192.168.10.3 eq 444
outside_in list extended access permitted tcp 207.126.144.0 255.255.240.0 host 192.168.10.11 eq 444
outside_in list extended access permitted tcp 207.126.144.0 255.255.240.0 eq smtp host 192.168.10.11
outside_in list extended access permitted tcp 207.126.144.0 255.255.240.0 host 192.168.10.2 eq smtp
outside_in list extended access tcp refuse any host 192.168.10.11 eq smtp
outside_in list extended access tcp refuse any host 192.168.10.2 eq smtp
outside_in list extended access permit tcp any host 192.168.10.2 eq smtp
outside_in list extended access permit udp any host 192.168.10.2 eq 443
outside_in list extended access permit tcp any host 192.168.10.3 eq 3389
outside_in list extended access permit tcp any host 192.168.10.2 eq 4125
outside_in list extended access permit tcp any host 192.168.10.11 eq https
outside_in list extended access permit tcp any host 192.168.10.2 eq https
outside_in list extended access allowed esp all the host 91.X.X.57
outside_in list extended access permit tcp any host 192.168.10.3 eq 1433
access-list extended outside_in permit ip host 91.X.X.57 all
access-list outside_in extended permit ip any host 79.X.X.5
access-list outside_in extended permit ip any host 79.X.X.2
outside_in list extended access permit tcp any host 79.X.X.6 eq 3389
outside_in list extended access permit tcp any host 192.168.10.220 eq 3389
outside_in list extended access permit tcp any host 79.X.X.5 eq 81
access extensive list permits all ip a outside_in
outside_in list extended access permit tcp host 91.X.X.178 host 192.168.10.7 eq 1433
outside_in list extended access permit tcp host 87.X.X.73 host 192.168.10.7 eq 1433
access-list extended qnap permit ip host 192.168.10.26 all
access-list extended qnap permit ip any host 192.168.10.26
phone_bypass list extended access allowed host 10.1.1.1 ip 192.168.10.0 255.255.255.0
permit phone_bypass to access extended list ip 192.168.10.0 255.255.255.0 host 10.1.1.1
phone_bypass list extended access allowed host 10.1.1.1 ip 192.168.2.0 255.255.255.0
phone_bypass to access extended list ip 192.168.2.0 allow 255.255.255.0 host 10.1.1.1
list of access vpn extended permit ip 192.168.10.0 255.255.255.0 192.168.11.0 255.255.255.0
extended vpn 192.168.11.0 ip access list allow 255.255.255.0 192.168.10.0 255.255.255.0
pager lines 24
Enable logging
exploitation forest-size of the buffer 1024000
logging asdm-buffer-size 512
logging buffered information
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
Comments of MTU 1500
mask of local pool RemoteVPN 192.168.2.20 - 192.168.2.100 IP 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any inside
ICMP allow all outside
ASDM image disk0: / asdm - 631.bin
enable ASDM history
ARP timeout 14400
NAT (any, any) source static sheep sheep sheep destination static sheep
NAT source service (Interior, exterior) static obj - 192.168.10.7 79.X.X.5 TCP1433 TCP1433
NAT (inside, outside) source static obj - 192.168.10.7 interface service zzz zzz
NAT (inside, all) source static obj - 10.0.0.0 obj - 10.0.0.0 destination static obj - 192.168.2.0 obj - 192.168.2.0
NAT (inside, all) source static obj - 192.168.10.0 obj - 192.168.10.0 destination static obj - 10.1.1.1 obj - 10.1.1.1
NAT (inside, all) source static obj - 10.1.1.1 obj - 10.1.1.1 destination static obj - 192.168.10.0 obj - 192.168.10.0
NAT (inside, all) source static obj - 192.168.0.0 obj - 192.168.0.0 destination static obj - 192.168.2.0 obj - 192.168.2.0
!
network object obj - 192.168.10.3
NAT (inside, outside) static service tcp 3389 3389 79.X.X.5
network object obj - 192.168.10.3 - 01
NAT (inside, outside) static 79.X.X.5 tcp 444 444 service
network object obj - 192.168.10.5
NAT (inside, outside) public static dns 79.X.X.3
network object obj - 192.168.10.7
NAT (inside, outside) interface static service tcp 3389 3389
network object obj - 192.168.10.220
NAT (inside, outside) static service tcp 3389 3389 79.X.X.6
network object obj - 192.168.10.220 - 1
NAT (inside, outside) static 79.X.X.6 tcp https https service
network object obj - 192.168.10.7 - 02
NAT (inside, outside) interface static tcp 8080 https service
network object obj - 192.168.10.11
NAT (inside, outside) static 79.X.X.5 tcp smtp smtp service
network object obj - 192.168.10.11 - 01
NAT (inside, outside) udp 443 443 service 79.X.X.5 static
network object obj - 192.168.10.11 - 02
NAT (inside, outside) static 79.X.X.5 tcp https https service
network object obj - 192.168.10.11 - 03
NAT (inside, outside) static 79.X.X.5 tcp https https service
network object obj - 192.168.10.26
NAT (inside, outside) static 79.X.X.5 8080 8080 tcp service
network object obj - 192.168.10.26 - 01
NAT (inside, outside) static 79.X.X.5 tcp 8080 www service
network object obj - 192.168.10.15
NAT (inside, outside) static 79.X.X.5 tcp 81 www service
network obj_any object
NAT dynamic interface (indoor, outdoor)
network obj_any-01 object
NAT dynamic interface (guest, outdoor)
Access-group inside_out in interface inside
Access-group outside_in in external interface
Route outside 0.0.0.0 0.0.0.0 79.X.X.1 1
Route inside 10.0.0.0 255.0.0.0 192.168.10.4 1
Route outside 10.1.1.1 255.255.255.255 192.168.10.4 1
Route outside 192.168.11.0 255.255.255.0 79.X.X.2 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
RADIUS Protocol RADIUS AAA server
reactivation impoverishment deadtime mode 1
AAA-server RADIUS (inside) host 192.168.10.7
key *.
AAA authentication http LOCAL console
the ssh LOCAL console AAA authentication
LOCAL AAA authorization command
http server enable 444
http 0.0.0.0 0.0.0.0 inside
http 0.0.0.0 0.0.0.0 outdoors
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
No vpn sysopt connection permit
Service resetoutside
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-AES-SHA 256 - aes - esp esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto-map dynamic outside_dyn_map pfs set 20 Group1
Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA
card crypto outside_map 1 match for vpn
outside_map game 1 card crypto peer 91.X.X.57
card crypto outside_map 1 set of transformation-ESP-AES-SHA
outside_map map 1 lifetime of security association set seconds 28800 crypto
card crypto outside_map 1 set security-association life kilobytes 4608000
map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
outside_map interface card crypto outside
crypto isakmp identity address
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
lifetime 28800
Crypto isakmp nat-traversal 3600
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 inside
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 30
Console timeout 0
dhcpd dns 83.X.X.8 83.X.X.10
dhcpd outside auto_config
!
dhcpd address 192.168.10.50 - 192.168.10.100 inside
dhcpd dns 83.X.X.8 83.X.X.10 interface inside
dhcpd lease interface 600 inside
dhcpd interface to domain.com domain inside
!
Reviews of dhcpd address 192.168.4.50 - 192.168.4.100
Dhcpd lease 600 interface comments
Comments enable dhcpd
!
priority queue inside
priority-queue outdoors
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
NTP 93.170.32.1 Server
NTP 93.170.32.2 Server
NTP 89.145.68.17 Server prefer
WebVPN
allow outside
SVC image disk0:/anyconnect-win-2.4.1012-k9.pkg 1 regex 'Windows NT'
SVC image disk0:/anyconnect-wince-ARMv4I-2.4.1012-k9.pkg 2 regex "Windows CE"
enable SVC
Auto-signon allow ip 192.168.0.0 255.255.0.0 basic auth-type
internal l2l group policy
attributes of the l2l group policy
VPN-idle-timeout no
Protocol-tunnel-VPN IPSec
attributes of Group Policy DfltGrpPolicy
value of server DNS 192.168.10.11
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list VPN_splitTunnelAcl
value by default-field DOMAINl.local
internal VPNv group strategy
attributes of Group Policy VPNv
value of server DNS 192.168.10.11
Protocol-tunnel-VPN IPSec webvpn
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list VPN_splitTunnelAcl
field default value domain.com
password username test * encrypted privilege 0
username test attributes
VPN-group-policy VPNv
ID password cisco * encrypted
roger password username * encrypted privilege 15
attributes global-tunnel-group DefaultRAGroup
address pool RemoteVPN
attributes global-tunnel-group DefaultWEBVPNGroup
address pool RemoteVPN
Group-LOCAL RADIUS authentication server
type tunnel-group VPNv remote access
attributes global-tunnel-group VPNv
address pool RemoteVPN
Group-LOCAL RADIUS authentication server
Group Policy - by default-VPNv
IPSec-attributes tunnel-group VPNv
pre-shared key *.
tunnel-group testgroup type remote access
tunnel-group testgroup General attributes
management of the password password-expire-to-days 90
tunnel-group 91.X.X.57 type ipsec-l2l
IPSec-attributes tunnel-group 91.X.X.57
pre-shared key *.
!
Global class-card class
match default-inspection-traffic
class-map qnap_band
corresponds to the list of access qnap
The class-card phone
corresponds to the phone_bypass access list
!
!
Policy-map global_policy
Global category
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Policy-map qnap_access
class qnap_band
512000 64000 police entry
512000 64000 release of police
phone class
set the advanced options of the tcp-State-bypass connection
World-Policy policy-map
Global category
inspect the dns
inspect the ftp
inspect the pptp
inspect the rtsp
inspect the sip
inspect the skinny
Policy-map phone_bypass_policy
phone class
set the advanced options of the tcp-State-bypass connection
!
service-policy-international policy global
service-policy qnap_access to the inside interface
privilege level 3 mode exec cmd command perfmon
privilege level 3 mode exec cmd ping command
mode privileged exec command cmd level 3
logging of the privilege level 3 mode exec cmd commands
privilege level 3 exec command failover mode cmd
privilege level 3 mode exec command packet cmd - draw
privilege level 5 see fashion exec running-config command
order of privilege show level 3 exec mode reload
privilege level 3 exec mode control fashion show
privilege see the level 3 exec firewall command mode
privilege see the level 3 exec mode command ASP.
processor mode privileged exec command to see the level 3
privilege command shell see the level 3 exec mode
privilege show level 3 exec command clock mode
privilege exec mode level 3 dns-hosts command show
privilege see the level 3 exec command access-list mode
logging of orders privilege see the level 3 exec mode
privilege, level 3 see the exec command mode vlan
privilege show level 3 exec command ip mode
privilege, level 3 see fashion exec command ipv6
privilege, level 3 see the exec command failover mode
privilege, level 3 see fashion exec command asdm
exec mode privilege see the level 3 command arp
command routing privilege see the level 3 exec mode
privilege, level 3 see fashion exec command ospf
privilege, level 3 see the exec command in aaa-server mode
AAA mode privileged exec command to see the level 3
privilege see the level 3 exec mode command crypto
privilege, level 3 see fashion exec command vpn-sessiondb
privilege level 3 exec mode command ssh show
privilege, level 3 see fashion exec command dhcpd
privilege, level 3 see the vpnclient command exec mode
privilege, level 3 see fashion exec command vpn
privilege level see the 3 blocks from exec mode command
privilege, level 3 see fashion exec command wccp
privilege, level 3 see the exec command in webvpn mode
privilege control module see the level 3 exec mode
privilege, level 3 see fashion exec command uauth
privilege see the level 3 exec command compression mode
level 3 for the show privilege mode configure the command interface
level 3 for the show privilege mode set clock command
level 3 for the show privilege mode configure the access-list command
level 3 for the show privilege mode set up the registration of the order
level 3 for the show privilege mode configure ip command
level 3 for the show privilege mode configure command failover
level 5 mode see the privilege set up command asdm
level 3 for the show privilege mode configure arp command
level 3 for the show privilege mode configure the command routing
level 3 for the show privilege mode configure aaa-order server
level mode 3 privilege see the command configure aaa
level 3 for the show privilege mode configure command crypto
level 3 for the show privilege mode configure ssh command
level 3 for the show privilege mode configure command dhcpd
level 5 mode see the privilege set privilege to command
privilege level clear 3 mode exec command dns host
logging of the privilege clear level 3 exec mode commands
clear level 3 arp command mode privileged exec
AAA-server of privilege clear level 3 exec mode command
privilege clear level 3 exec mode command crypto
level 3 for the privilege cmd mode configure command failover
clear level 3 privilege mode set the logging of command
privilege mode clear level 3 Configure arp command
clear level 3 privilege mode configure command crypto
clear level 3 privilege mode configure aaa-order server
context of prompt hostname
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Thanks in advance for any help.
Wojciech salvation,
Based on this info, I think that you can run in CSCtb53186, this bug has affected many versions before 8.3 and when fixed DEVs they were always be some details in waiting, and they created CSCtd36473 to these outstanding issues. CSCtd36473 is fixed on 8.3.1.1 intermediate version however is not fixed on 8.3.1 so I suggest you spend at least 8.3.2
Read this:
Interface: outside
Tag crypto map: outside_map, seq num: 1, local addr: 79.X.X.2list of access vpn extended permit ip 192.168.10.0 255.255.255.0 192.168.11.0 255.255.255.0
local ident (addr, mask, prot, port): (192.168.10.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (192.168.11.0/255.255.255.0/0/0)
current_peer: 91.Y.Y.57#pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
#pkts decaps: 502, #pkts decrypt: 502, #pkts check: 502
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, comp #pkts failed: 0, #pkts Dang failed: 0
success #frag before: 0, failures before #frag: 0, #fragments created: 0
Sent #PMTUs: 0, #PMTUs rcvd: 0, reassembly: 20th century / of frgs #decapsulated: 0
#send errors: 0, #recv errors: 0outgoing esp sas:
SPI: 0xDE50E6EA (3729843946)
transform: aes-256-esp esp-md5-hmac no compression
running parameters = {L2L, Tunnel}
slot: 0, id_conn: 425984, crypto-card: outside_map
calendar of his: service life remaining (KB/s) key: (4374000/28234)
Size IV: 16 bytes
support for replay detection: Y
Anti-replay bitmap:
0x00000000 0x00000001
VPN CTX = 0x015F913C
By peer IP = 192.168.11.0
Pointer = 0xD98CACD0
State = upwards
Flags = BA + ESP
ITS = 0X019235E7
SPI = 0xDE50E6EA
Group = 0
Pkts = 0
Pkts bad = 0
Incorrect SPI = 0
Parody = 0
Bad crypto = 0
Redial Pkt = 0
Call redial = 0
VPN = filterhits = 0, user_data is0x15f913c, cs_id = 0xd83ad0e8, reverse, flags = 0 x 0 = 0 protocol
IP/ID=192.168.10.0 SRC, mask is 255.255.255.0, port = 0
IP/ID=192.168.11.0 DST, mask is 255.255.255.0, port = 0, dscp = 0 x 0hits = 44437, user_data is0xce165c, cs_id = 0xd83ad0e8, reverse, flags = 0 x 0 = 0 protocol
IP/ID=192.168.10.0 SRC, mask is 255.255.255.0, port = 0
IP/ID=192.168.11.0 DST, mask is 255.255.255.0, port = 0, dscp = 0 x 0As you can see above we are a different context to encrypt the traffic (not used with the spi of the sh cry ipsec his)
If you do the same packet tracer, but this time with the details of the key words at the end probs you will get to see that we use 0xce165c.
Just looked at your configuration again and before you do the upgrade please correct this:
list of access vpn extended permit ip 192.168.10.0 255.255.255.0 192.168.11.0 255.255.255.0
extended vpn 192.168.11.0 ip access list allow 255.255.255.0 192.168.10.0 255.255.255.0
Just remove the second line:
no -access extended vpn ip 192.168.11.0 list allow 255.255.255.0 192.168.10.0 255.255.255.0
Also:
No outside_map interface card crypto outside
and then:
outside_map interface card crypto outside
See if that helps before perforrming upgrade,
Kind regards.
-
LAN to Lan tunnel between ASA 5505 and 3030.
I am unable to build a tunnel vpn site-to-site between an ASA 5505 and our Cisco 3030. I tried all possible combinations except one that will work. I am able to ping each peer on the other site. Someone at - it a config between two tunnels of Lan to Lan to work between a 5505 and 3030 that works. Thank you
Hello
Please visit this link using config:
http://www.Cisco.com/c/en/us/support/docs/security/VPN-3000-series-conce...
Kind regards
Aditya
Please evaluate the useful messages.
-
Bring up the tunnel vpn crypto without interesting traffic map
Is it possible on ASA to bring up the tunnel vpn site to site static crypto map without generating interesting traffic? I want to reverse route injection generate road dynamic until traffic begins to flow.
Roman,
Unless something chnaged recently RRI inserts routes without present SAs, meaning that they are static (in contrast to current default behavior on IOS 12.4 (9) T-I_think leave).
But to answer the question, in more recent versions, you can bring up the tunnel using packet - trace CLI.
M.
Edit: request for improvement that will present the same features of IPP on ASA as on IOS:
http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId= CSCsx67450
-
Tunnel VPN site to Site - aggressive Mode
I searched the community for answers to this and that you have not found quite what I was looking for (or what seems logical). I have an ASA 5510 to A site with one website VPN tunnel to a SonicWall to site B. Which works very well. I need to create a tunnel for site C to site a using a tunnel of aggressive mode. I'm not quite sure how to do this. Any suggestion would be great!
NOTE: I have included the parts of the running configuration that seem relevant to me. If I missed something please let me know.
ASA Version 8.2 (1)
interface Ethernet0/0
nameif outside
security-level 0
IP 1.2.3.4 255.255.255.248
!
10.5.2.0 IP Access-list extended site_B 255.255.255.0 allow 10.205.2.0 255.255.255.128
access extensive list ip 10.5.2.0 site_C allow 255.255.255.0 10.205.2.128 255.255.255.128
dynamic-access-policy-registration DfltAccessPolicy
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set esp-3des esp-sha-hmac 3des-sha1
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto VPN 30 card matches the address site_B
card crypto VPN 30 peer set 4.3.2.1
crypto VPN 30 the transform-set 3des-sha1 value card
card crypto VPN 40 corresponds to the address site_C
card crypto VPN. 40 set peer 8.7.6.5
crypto VPN. 40 the transform-set 3des-sha1 value card
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Crypto isakmp nat-traversal 30
crypto ISAKMP ipsec-over-tcp port 10000
attributes of Group Policy DfltGrpPolicy
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
tunnel-group 4.3.2.1 type ipsec-l2l
4.3.2.1 tunnel-group ipsec-attributes
pre-shared-key *.
tunnel-group 8.7.6.5 type ipsec-l2l
IPSec-attributes tunnel-group 8.7.6.5
pre-shared-key *.
David,
Please try this:
clear crypto ipsec its peer site_c_IP
clear configure VPN 40 crypto card
card crypto VPN 10 corresponds to the address site_C
card crypto VPN 10 set peer 8.7.6.5
crypto VPN 10 the transform-set 3des-sha1 value card
debug logging in buffered memory
capture drop all circular asp type
capture capin interface inside the match ip 10.5.2.0 255.255.255.0 10.205.2.128 255.255.255.128
After generating the traffic and INTERNAL of the machine behind the ASA:
view Journal | 10.205.2 Inc.
See the fall of cap. 10.205.2 Inc.
view Cape capin
In case it does not work:
(a) show the crypto classic table ASP.
(b) details of vpn-framework for table ASP.
(c) show cry its site_c peer ipsec
(d) entry packet - trace within the icmp 10.5.2.15 8 0 10.205.2.130 detail
(e) see the crypto ipsec his
At the same time, please.
Let me know how it goes.
Thank you
Portu.
Please note all useful posts
-
Impossible to access them Internert through the split tunneling VPN client.
I divided tunnel configured on a PIX 515. The remote VPN client connects to the PIX very well and can ping hosts on the internal network, but cannot access the Internet. Am I missing something? My config as shown below.
In addition, I don't see the routes on the VPN client via statistics (screenshot below)
All opinions are appreciated.
Rob
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
8.0 (3) version PIX
!
hostname PIX-to-250
enable the encrypted password xxxxx
names of
!
interface Ethernet0
nameif outside
security-level 0
IP address x.x.x.250 255.255.255.240
!
interface Ethernet1
nameif inside
security-level 100
IP 192.168.9.1 255.255.255.0
!
XXXXX encrypted passwd
passive FTP mode
DNS domain-lookup outside
DNS server-group Ext_DNS
Server name 194.72.6.57
Server name 194.73.82.242
the LOCAL_LAN object-group network
object-network 192.168.9.0 255.255.255.0
object-network 192.168.88.0 255.255.255.0
Internet_Services tcp service object-group
port-object eq www
area of port-object eq
EQ object of the https port
port-object eq ftp
EQ object of port 8080
port-object eq telnet
the WAN_Network object-group network
object-network 192.168.200.0 255.255.255.0
ACLOUT list extended access allowed object-group LOCAL_LAN udp any eq log field
ACLOUT list extended access allow icmp object-group LOCAL_LAN no matter what paper
ACLOUT list extended access permitted tcp object-group LOCAL_LAN connect to any object-group Internet_Services
access-list extended ACLIN all permit icmp any what newspaper echo-reply
access-list extended ACLIN all permit icmp any how inaccessible journal
access-list extended ACLIN allowed icmp no matter what newspaper has exceeded the time
Comment by split_tunnel_list-LAN Local access list
split_tunnel_list list standard access allowed 192.168.9.0 255.255.255.0
access-list extended SHEEP allowed object-group ip LOCAL_LAN 192.168.100.0 255.255.255.0
pager lines 24
Enable logging
Outside 1500 MTU
Within 1500 MTU
IP local pool testvpn 192.168.100.1 - 192.168.100.99
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0 access-list SHEEP
NAT (inside) 1 0.0.0.0 0.0.0.0
Access-group ACLIN in interface outside
ACLOUT access to the interface inside group
Route outside 0.0.0.0 0.0.0.0 195.171.252.45 1
Route inside 192.168.88.0 255.255.255.0 192.168.88.254 1
Route inside 192.168.199.0 255.255.255.0 192.168.199.254 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout, uauth 0:05:00 absolute
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-sha-hmac Set_1
Crypto-map dynamic outside_dyn_map 10 game of transformation-Set_1
life together - the association of security crypto dynamic-map outside_dyn_map 10 seconds 280000
Crypto-map dynamic outside_dyn_map 10 the value reverse-road
outside_map 10 card crypto ipsec-isakmp dynamic outside_dyn_map
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 1
preshared authentication
3des encryption
sha hash
Group 2
life 43200
crypto ISAKMP policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
a basic threat threat detection
Statistics-list of access threat detection
internal testvpn group policy
attributes of the strategy of group testvpn
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
name of user testuser encrypted password xxxxxx
type tunnel-group testvpn remote access
tunnel-group testvpn General-attributes
address testvpn pool
Group Policy - by default-testvpn
testvpn group of tunnel ipsec-attributes
pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:5dcb5dcdff277e1765a9a0c366b88b9e
: end
# 250 A - PIX
You have not assigned the ACL split tunnel to your strategy.
PLS, configure the following:
attributes of the strategy of group testvpn
value of Split-tunnel-network-list split_tunnel_list
-
Can anyone help me how I will work with tunnel VPN Failover.
Hi Experts,
I have two 5520 ASA one headquarters and another is disaster recovery. So I need to build the tunnel of the Branch Office Chief at the office that I have 3g router.
So I need to build failover to ASA of recovery after a disaster. Please can someone help me what would be the best option that makes my task complete.
Thank you
Mohammed
Hello
I guess you are looking for a relief tunnel VPN router. Here's how you set it up:
I hope this helps.
Kind regards
Anisha
P.S.: Please mark this thread as answered if you feel that your query is resolved. Note the useful messages.
-
Question about the connection of a customer VPN ASA
Hi guys,.
I have a question about Tunneling VPN. I have an ASA 5505 with static PPPoE address external and local 192.168.202.0/24 network, operates as an EasyVPN server. On the other side is an another ASA 5505 without dynamic PPPoE outside interface acting as EasyVPN customer in customer ode. The internal network is 192.168.1.0/24
It works very well! But now, I created another user who uses EasyVPN client software to connect to the EasyVPN server. This works as well.
But how am I able to connect customer network 192.168.1.0/24 on the connections of the ASA?
Please give me a hint.
"But how am I able to connect customer network 192.168.1.0/24 on the connections of the ASA?
Yes, if you set the ACL of split tunnel correctly you should be able to connect to the remote client ASA.
Please follow the method of configuration of Cisco doc split tunnel, at the bottom of the link.
Evaluate the useful ticket.
Thank you
Rizwan James
-
Recently I tried to build a tunnel VPN of LAN LAN 2 connecting an Asa to a current zone based firewall 2911. It's a standard IPSec psk tunnel nothing complicated. I got the tunnel to establish, but I could only get traffic to encap on the side of the SAA and decap on the side of 2911. I couldn't return circulation. I followed this doc classic here for IPSec in the last example.
http://www.Cisco.com/en/us/prod/collateral/vpndevc/ps5708/ps5710/ps1018/...
And I don't know that the SAA is right I have built a ton of those but I am new to zfw. I don't see anything about a NAT rule exempt. But as all used real IPs instead of NAT I wasn't sure and I have found no info. I do free NAT? If If you are using a roadmap on the end you NAT overload line config as in the past?
I also have a pair of area to "self" and I didn't know if I need something there to be able to do a ping from inside the 2911 interface when the tunnel is at the top of the remote end. Thank you
Is the pair area yourself, outside of itself?
And you say that you do not use only NAT, have real addresses (public routable addresses?), so why you have to make an exception for NAT you have not?
-
Hello
I installed a tunnel VPN between ASA and PIX. I want to implement security on the ASA or PIX so that some remote endpoint specfic IP can access resources of tunnel. is it possible to block additional IP addresses?
Thank you
Amardeep
Please read this link, you can implement VPN-filter.
Thank you
Ajay
-
Is it possible to allow remote user access vpn access to another remote site via a VPN tunnel? can someone point me to some configurations on how can this be achieved?
I have already configured a VPN site-to site between a PIX and ASA and remote VPN access is also configured on the PIX (IPsec client). I'm trying to allow clients that connect the PIX to also have access to inside the ASA network.
Thank you
Ash
Here you go:
Basicall you must do three things:
1. change the L2L tunnel interesting traffic
2. change the split tunneling VPN client ACL
3. let the intra comunication interfaces.
HTH
Raga
-
How can I prevent all automatic starts iTunes?
Hello
Is someone can you PLEASE advise me how I can prevent ITunes turning prematurely gray? It starts with persistence without asking for confirmation. I want to be able to achieve is to prevent ITunes automatically start under ANY circumstances.
I have already completed THE steps to ignore my IPhone and IPad and Itunes isn't in any login script (as far as I can see). Something is always load up and leads me into the wall
What seems to be incited ITunes at startup was a message saying that my Session of Apple (or something like that) had expired and I had to reconnect again...
I found a solution a little backward... but I wonder if an Itunes update has restored this infuriating behavior and to make it worse, I remember not where I found the solution.
Guidance would be MUCH appreciated.
Steve
Hacks to stop Bluetooth speaker to start iTunes-
http://forums.MacRumors.com/ShowPost.php?p=19045335 & postcount = 4
LincDavis August 2015 post - https://discussions.apple.com/message/28821151#28821151
Maybe you are looking for
-
How to change the letters of the disc in XP
During repair XP, after the kids he messed up, the names of CD/DVD players changed into something like "Compact Flash" and "MS/SD" or something like that. How can I change the names of back to Cd/DVD? The letters are very well that just the names a
-
Just updated my aspire D255 android now does not
Hello I have just updated my acer aspire one D255 of windows 7 to windows 10 and now, the side of my laptop android does not start I have no option at startup to boot Android can someone please help me with this thank you. Update I used the Manager C
-
G62Notebook HP G62-341NR PC: G62-341NR
The problem is that the video light keeps going on this unit. Actually I Can shine a flashlight and you can see what is on the screen, but it's as if there is a blackout on it. I don't know what the problem is or how to fix it. He does intermittently
-
I changed my antenna to Time Warner Cable and Media Center has stopped working
I have Windows Vista Home Premiun Multimedia card Hauppauge 1250 I know that the card does not work because I hace Hauppauge WinTV and it works fine I can not configure Windows Media Center (Windows Medis Center has stopped working)
-
Want K203TX: Display will not wake up
This is a new laptop. I did nothing about it, other than updates of Windows install and create recovery discs. I put the option "turn off the display of" 1 Minute. IMPORTANT: I put the brightness screen completely to zero, the lowest setting possible