How to secure Tunnel VPN

Hello

I installed a tunnel VPN between ASA and PIX. I want to implement security on the ASA or PIX so that some remote endpoint specfic IP can access resources of tunnel. is it possible to block additional IP addresses?

Thank you

Amardeep

Please read this link, you can implement VPN-filter.

http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00808c9a87.shtml

Thank you

Ajay

Tags: Cisco Security

Similar Questions

Can anyone help me how I will work with tunnel VPN Failover.

Hi Experts,

I have two 5520 ASA one headquarters and another is disaster recovery. So I need to build the tunnel of the Branch Office Chief at the office that I have 3g router.

So I need to build failover to ASA of recovery after a disaster. Please can someone help me what would be the best option that makes my task complete.

Thank you

Mohammed

Hello

I guess you are looking for a relief tunnel VPN router. Here's how you set it up:

http://www.Cisco.com/en/us/products/sw/secursw/ps5318/products_user_guide_chapter09186a0080531f28.html#wp1002246

I hope this helps.

Kind regards

Anisha

P.S.: Please mark this thread as answered if you feel that your query is resolved. Note the useful messages.

How to allow remote VPN Sessions to communicate

Hi all

I'm trying to understand how to enable remote VPN client sessions to communicate. For example, if my manager has been connected via VPN to the office and needed me to fix something on his laptop, I cannot VPN to the office and RDP into her laptop. Not sure if this can be done without pain.

A brief out of my config. Remote client VPN sessions work fine. It's only when I try to access other customer VPN sessions, is where I have a problem.

Thank you is advanced!

FW # executed sho

: Saved

:

interface Ethernet0/0

nameif inside

security-level 100

IP 192.168.1.1 255.255.255.0

!

interface Ethernet0/1

nameif outside

security-level 0

IP 4.4.1.8 255.255.255.252

!

interface Ethernet0/2

!

interface Ethernet0/3

!

!

permit same-security-traffic inter-interface

permit same-security-traffic intra-interface

outside_in list extended access permit icmp any one

split_tunnel list standard access allowed 192.168.1.0 255.255.255.0

inside_access_in of access allowed any ip an extended list

outside_access_in of access allowed any ip an extended list

access-list sheep extended 10.10.10.0 any allowed ip 255.255.255.0

IP local pool vpn 10.10.10.1 - 10.10.10.15 mask 255.255.255.0

Global 1 interface (outside)

NAT (inside) 0 access-list sheep

NAT (inside) 1 0.0.0.0 0.0.0.0

inside_access_in access to the interface inside group

Access-group outside_in in external interface

Route outside 0.0.0.0 0.0.0.0 4.4.1.7 1

Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

Crypto-map dynamic inetdyn_map 20 the value transform-set ESP-DES-SHA

map inet_map 65535-isakmp ipsec crypto dynamic inetdyn_map

inet_map interface card crypto outside

inside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

inside crypto map inside_map interface

crypto isakmp identity address

crypto ISAKMP allow inside

crypto ISAKMP allow outside

crypto ISAKMP policy 10

preshared authentication

the Encryption

sha hash

Group 2

life 86400

Crypto isakmp nat-traversal 21

internal vpnipsec group policy

attributes of the strategy of group vpnipsec

value of 192.168.1.5 WINS server

value of server DNS 192.168.1.5

Split-tunnel-policy tunnelspecified

value of Split-tunnel-network-list split_tunnel

moobie.com value by default-field

type tunnel-group vpnipsec remote access

tunnel-group vpnipsec General-attributes

vpn address pool

Group Policy - by default-vpnipsec

vpnipsec group of tunnel ipsec-attributes

pre-shared key nope

!

Hello

You need to allow pool vpn split tunnel, here's what you need to do

split_tunnel list standard access allowed 10.10.10.0 255.255.255.0

same-security- allowed traffic intra-interface

Kind regards

Bad Boy

P.S. Please mark this message as 'Responded' If you find this information useful so that it brings goodness to other users of the community

Tunnel VPN site to Site - aggressive Mode

I searched the community for answers to this and that you have not found quite what I was looking for (or what seems logical). I have an ASA 5510 to A site with one website VPN tunnel to a SonicWall to site B. Which works very well. I need to create a tunnel for site C to site a using a tunnel of aggressive mode. I'm not quite sure how to do this. Any suggestion would be great!

NOTE: I have included the parts of the running configuration that seem relevant to me. If I missed something please let me know.

ASA Version 8.2 (1)

interface Ethernet0/0

nameif outside

security-level 0

IP 1.2.3.4 255.255.255.248

!

10.5.2.0 IP Access-list extended site_B 255.255.255.0 allow 10.205.2.0 255.255.255.128

access extensive list ip 10.5.2.0 site_C allow 255.255.255.0 10.205.2.128 255.255.255.128

dynamic-access-policy-registration DfltAccessPolicy

Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

Crypto ipsec transform-set esp-3des esp-sha-hmac 3des-sha1

life crypto ipsec security association seconds 28800

Crypto ipsec kilobytes of life - safety 4608000 association

crypto VPN 30 card matches the address site_B

card crypto VPN 30 peer set 4.3.2.1

crypto VPN 30 the transform-set 3des-sha1 value card

card crypto VPN 40 corresponds to the address site_C

card crypto VPN. 40 set peer 8.7.6.5

crypto VPN. 40 the transform-set 3des-sha1 value card

crypto ISAKMP allow outside

crypto ISAKMP policy 10

preshared authentication

3des encryption

sha hash

Group 2

life 86400

Crypto isakmp nat-traversal 30

crypto ISAKMP ipsec-over-tcp port 10000

attributes of Group Policy DfltGrpPolicy

Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn

tunnel-group 4.3.2.1 type ipsec-l2l

4.3.2.1 tunnel-group ipsec-attributes

pre-shared-key *.

tunnel-group 8.7.6.5 type ipsec-l2l

IPSec-attributes tunnel-group 8.7.6.5

pre-shared-key *.

David,

Please try this:

clear crypto ipsec its peer site_c_IP

clear configure VPN 40 crypto card

card crypto VPN 10 corresponds to the address site_C

card crypto VPN 10 set peer 8.7.6.5

crypto VPN 10 the transform-set 3des-sha1 value card

debug logging in buffered memory

capture drop all circular asp type

capture capin interface inside the match ip 10.5.2.0 255.255.255.0 10.205.2.128 255.255.255.128

After generating the traffic and INTERNAL of the machine behind the ASA:

view Journal | 10.205.2 Inc.

See the fall of cap. 10.205.2 Inc.

view Cape capin

In case it does not work:

(a) show the crypto classic table ASP.

(b) details of vpn-framework for table ASP.

(c) show cry its site_c peer ipsec

(d) entry packet - trace within the icmp 10.5.2.15 8 0 10.205.2.130 detail

(e) see the crypto ipsec his

At the same time, please.

Let me know how it goes.

Thank you

Portu.

Please note all useful posts

Impossible to access them Internert through the split tunneling VPN client.

I divided tunnel configured on a PIX 515. The remote VPN client connects to the PIX very well and can ping hosts on the internal network, but cannot access the Internet. Am I missing something? My config as shown below.

In addition, I don't see the routes on the VPN client via statistics (screenshot below)

All opinions are appreciated.

Rob

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------

8.0 (3) version PIX

!

hostname PIX-to-250

enable the encrypted password xxxxx

names of

!

interface Ethernet0

nameif outside

security-level 0

IP address x.x.x.250 255.255.255.240

!

interface Ethernet1

nameif inside

security-level 100

IP 192.168.9.1 255.255.255.0

!

XXXXX encrypted passwd

passive FTP mode

DNS domain-lookup outside

DNS server-group Ext_DNS

Server name 194.72.6.57

Server name 194.73.82.242

the LOCAL_LAN object-group network

object-network 192.168.9.0 255.255.255.0

object-network 192.168.88.0 255.255.255.0

Internet_Services tcp service object-group

port-object eq www

area of port-object eq

EQ object of the https port

port-object eq ftp

EQ object of port 8080

port-object eq telnet

the WAN_Network object-group network

object-network 192.168.200.0 255.255.255.0

ACLOUT list extended access allowed object-group LOCAL_LAN udp any eq log field

ACLOUT list extended access allow icmp object-group LOCAL_LAN no matter what paper

ACLOUT list extended access permitted tcp object-group LOCAL_LAN connect to any object-group Internet_Services

access-list extended ACLIN all permit icmp any what newspaper echo-reply

access-list extended ACLIN all permit icmp any how inaccessible journal

access-list extended ACLIN allowed icmp no matter what newspaper has exceeded the time

Comment by split_tunnel_list-LAN Local access list

split_tunnel_list list standard access allowed 192.168.9.0 255.255.255.0

access-list extended SHEEP allowed object-group ip LOCAL_LAN 192.168.100.0 255.255.255.0

pager lines 24

Enable logging

Outside 1500 MTU

Within 1500 MTU

IP local pool testvpn 192.168.100.1 - 192.168.100.99

no failover

ICMP unreachable rate-limit 1 burst-size 1

don't allow no asdm history

ARP timeout 14400

Global 1 interface (outside)

NAT (inside) 0 access-list SHEEP

NAT (inside) 1 0.0.0.0 0.0.0.0

Access-group ACLIN in interface outside

ACLOUT access to the interface inside group

Route outside 0.0.0.0 0.0.0.0 195.171.252.45 1

Route inside 192.168.88.0 255.255.255.0 192.168.88.254 1

Route inside 192.168.199.0 255.255.255.0 192.168.199.254 1

Timeout xlate 03:00

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout, uauth 0:05:00 absolute

dynamic-access-policy-registration DfltAccessPolicy

Enable http server

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown cold start

Crypto ipsec transform-set esp-3des esp-sha-hmac Set_1

Crypto-map dynamic outside_dyn_map 10 game of transformation-Set_1

life together - the association of security crypto dynamic-map outside_dyn_map 10 seconds 280000

Crypto-map dynamic outside_dyn_map 10 the value reverse-road

outside_map 10 card crypto ipsec-isakmp dynamic outside_dyn_map

outside_map interface card crypto outside

crypto ISAKMP allow outside

crypto ISAKMP policy 1

preshared authentication

3des encryption

sha hash

Group 2

life 43200

crypto ISAKMP policy 65535

preshared authentication

3des encryption

sha hash

Group 2

life 86400

Telnet timeout 5

SSH timeout 5

Console timeout 0

a basic threat threat detection

Statistics-list of access threat detection

internal testvpn group policy

attributes of the strategy of group testvpn

Protocol-tunnel-VPN IPSec

Split-tunnel-policy tunnelspecified

name of user testuser encrypted password xxxxxx

type tunnel-group testvpn remote access

tunnel-group testvpn General-attributes

address testvpn pool

Group Policy - by default-testvpn

testvpn group of tunnel ipsec-attributes

pre-shared-key *.

!

class-map inspection_default

match default-inspection-traffic

!

!

type of policy-card inspect dns preset_dns_map

parameters

message-length maximum 512

Policy-map global_policy

class inspection_default

inspect the preset_dns_map dns

inspect the ftp

inspect h323 h225

inspect the h323 ras

inspect the netbios

inspect the rsh

inspect the rtsp

inspect the skinny

inspect esmtp

inspect sqlnet

inspect sunrpc

inspect the tftp

inspect the sip

inspect xdmcp

inspect the icmp

!

global service-policy global_policy

context of prompt hostname

Cryptochecksum:5dcb5dcdff277e1765a9a0c366b88b9e

: end

# 250 A - PIX

You have not assigned the ACL split tunnel to your strategy.

PLS, configure the following:

attributes of the strategy of group testvpn

value of Split-tunnel-network-list split_tunnel_list

Tunnel VPN site to Site with 2 routers Cisco 1921

Hi all

So OK, I'm stumped. I create much s2s vpn tunnels before, but this one I just can't go there. It's just a tunnel VPN Site to Site simple using pre-shared keys. I would appreciate it if someone could take a look at our configs for both routers running and provide a comment. This is the configuration for both routers running. Thank you!

Router 1

=======

Current configuration: 4009 bytes

!

! Last configuration change at 19:01:31 UTC Wednesday, February 22, 2012 by asiuser

!

version 15.0

horodateurs service debug datetime msec

Log service timestamps datetime msec

no password encryption service

!

SJWHS-RTRSJ host name

!

boot-start-marker

boot-end-marker

!

!

No aaa new-model

!

!

!

!

No ipv6 cef

IP source-route

IP cef

!

!

DHCP excluded-address 192.168.200.1 IP 192.168.200.110

DHCP excluded-address IP 192.168.200.200 192.168.200.255

!

IP dhcp POOL SJWHS pool

network 192.168.200.0 255.255.255.0

default router 192.168.200.1

10.10.2.1 DNS server 10.10.2.2

!

!

no ip domain search

IP-name 10.10.2.1 Server

IP-name 10.10.2.2 Server

!

Authenticated MultiLink bundle-name Panel

!

!

Crypto pki trustpoint TP-self-signed-236038042

enrollment selfsigned

name of the object cn = IOS - Self - signed - certificate - 236038042

revocation checking no

rsakeypair TP-self-signed-236038042

!

!

TP-self-signed-236038042 crypto pki certificate chain

certificate self-signed 01

30820241 308201AA A0030201 02020101 300 D 0609 2A 864886 F70D0101 04050030

8B1E638A EC

quit smoking

license udi pid xxxxxxxxxx sn CISCO1921/K9

!

!

!

redundancy

!

!

!

!

crypto ISAKMP policy 10

md5 hash

preshared authentication

ISAKMP crypto key presharedkey address 112.221.44.18

!

!

Crypto ipsec transform-set esp-3des esp-md5-hmac IPSecTransformSet1

!

map CryptoMap1 10 ipsec-isakmp crypto

defined by peer 112.221.44.18

game of transformation-IPSecTransformSet1

match address 100

!

!

!

!

!

interface GigabitEthernet0/0

192.168.200.1 IP address 255.255.255.0

automatic duplex

automatic speed

!

!

interface GigabitEthernet0/1

Description wireless bridge

IP 172.17.1.2 255.255.255.0

automatic duplex

automatic speed

!

!

interface FastEthernet0/0/0

Verizon DSL description for failover of VPN

IP 171.108.63.159 255.255.255.0

automatic duplex

automatic speed

card crypto CryptoMap1

!

!

!

Router eigrp 88

network 172.17.1.0 0.0.0.255

network 192.168.200.0

redistribute static

passive-interface GigabitEthernet0/0

passive-interface FastEthernet0/0/0

!

IP forward-Protocol ND

!

no ip address of the http server

local IP http authentication

IP http secure server

!

IP route 0.0.0.0 0.0.0.0 172.17.1.1

IP route 112.221.44.18 255.255.255.255 171.108.63.1

!

access-list 100 permit ip 192.168.200.0 0.0.0.255 10.10.0.0 0.0.255.255

!

!

!

!

!

!

control plan

!

!

!

Line con 0

Synchronous recording

local connection

line to 0

line vty 0 4

exec-timeout 30 0

Synchronous recording

local connection

transport input telnet ssh

!

Scheduler allocate 20000 1000

end

=======

Router 2

=======

Current configuration: 3719 bytes

!

! Last configuration change at 18:52:54 UTC Wednesday, February 22, 2012 by asiuser

!

version 15.0

horodateurs service debug datetime msec

Log service timestamps datetime msec

no password encryption service

!

SJWHS-RTRHQ host name

!

boot-start-marker

boot-end-marker

!

logging buffered 1000000

!

No aaa new-model

!

!

!

!

No ipv6 cef

IP source-route

IP cef

!

!

!

!

no ip domain search

!

Authenticated MultiLink bundle-name Panel

!

!

Crypto pki trustpoint TP-self-signed-3490164941

enrollment selfsigned

name of the object cn = IOS - Self - signed - certificate - 3490164941

revocation checking no

rsakeypair TP-self-signed-3490164941

!

!

TP-self-signed-3490164941 crypto pki certificate chain

certificate self-signed 01

30820243 308201AC A0030201 02020101 300 D 0609 2A 864886 F70D0101 04050030

2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30

EA1455E2 F061AA

quit smoking

license udi pid xxxxxxxxxx sn CISCO1921/K9

!

!

!

redundancy

!

!

!

!

crypto ISAKMP policy 10

md5 hash

preshared authentication

ISAKMP crypto key presharedkey address 171.108.63.159

!

86400 seconds, duration of life crypto ipsec security association

!

Crypto ipsec transform-set esp-3des esp-md5-hmac IPSecTransformSet1

!

map CryptoMap1 10 ipsec-isakmp crypto

defined by peer 171.108.63.159

game of transformation-IPSecTransformSet1

match address 100

!

!

!

!

!

interface GigabitEthernet0/0

no ip address

automatic duplex

automatic speed

!

!

interface GigabitEthernet0/0.1

encapsulation dot1Q 1 native

IP 10.10.1.6 255.255.0.0

!

interface GigabitEthernet0/1

IP 172.17.1.1 255.255.255.0

automatic duplex

automatic speed

!

!

interface FastEthernet0/0/0

IP 112.221.44.18 255.255.255.248

automatic duplex

automatic speed

card crypto CryptoMap1

!

!

!

Router eigrp 88

Network 10.10.0.0 0.0.255.255

network 172.17.1.0 0.0.0.255

redistribute static

passive-interface GigabitEthernet0/0

passive-interface GigabitEthernet0/0.1

!

IP forward-Protocol ND

!

no ip address of the http server

local IP http authentication

IP http secure server

!

IP route 0.0.0.0 0.0.0.0 112.221.44.17

!

access-list 100 permit ip 10.10.0.0 0.0.255.255 192.168.200.0 0.0.0.255

!

!

!

!

!

!

control plan

!

!

!

Line con 0

Synchronous recording

local connection

line to 0

line vty 0 4

exec-timeout 30 0

Synchronous recording

local connection

transport input telnet ssh

!

Scheduler allocate 20000 1000

end

When the GRE tunnel carries your traffic to private ip range, your ACL must contain address of the host of point to point the IPSec tunnel.

Since then, both routers are running EIGRP in the corporate network, let the EIGRP Exchange routes via GRE tunnel, which is a good practice, rather than push the ip ranges private individual through the IPSec tunnel.

Let me know, if that's what you want.

Thank you

How long is a VPN Lan2Lan UP?

I have guys,

I have need of how long we already work until a tunnel VPN site to site between two ASRs or how long he comes back without any disconnection kwon. Do you know how I could check?

Thank you very much in advance for your suggest

Oscar Cardiel

I don't have an active VPN router to check and confirm at the moment, but I think that if you add the keyword 'detail' at the end of "show crypto isakmp its ' or ' crypto ipsec to show his" it will show you life far from the tunnel.

The order reference (link) indicates it should return the field "to life".

Tunnel VPN IPSEC Gre of the router in the branch office by Pix to the router HQ

Hi all

I tried to get this scenario to work before I put implement but am getting the error on router B.

01:05:38: % CRYPTO-6-IKMP_MODE_FAILURE: fast processing mode failed with the peer to 83.1.16.1

Here are the following details for networks

Router B

Address series 82.12.45.1/30

fast ethernet 192.168.20.1/24 address

PIX

outside the 83.1.16.1/30 interface eth0

inside 192.168.50.1/30 eth1 interface

Router

Fast ethernet (with Pix) 192.168.50.2/30 address

Loopback (A network) 192.168.100.1/24 address

Loopback (Network B) 192.168.200.1/24 address

Loopback (Network C) 192.168.300.1/24 address

Is could someone please tell me where im going wrong as I read the explanation of the error and it points to political unmaching. This has confused me like the two counterparts seem to have the same settings.

Config router B

======================

name of host B
!
Select the 5 secret goat.
!
username 7 privilege 15 password badger badger
iomem 15 memory size
IP subnet zero
!
!
no ip domain-lookup
IP - test.local domain name
!
property intellectual ssh delay 30
property intellectual ssh authentication-2 retries
!
crypto ISAKMP policy 5
md5 hash
preshared authentication
Group 2
ISAKMP crypto key VPN2VPN address 83.1.16.1
!
86400 seconds, duration of life crypto ipsec security association
!
Crypto ipsec transform-set esp - esp-md5-hmac VPN
!
crypto map 5 VPN ipsec-isakmp
defined by peer 83.1.16.1
PFS group2 Set
match address VPN
!
call the rsvp-sync
!
interface Loopback10
20.0.2.2 the IP 255.255.255.255
!
interface Tunnel0
bandwidth 1544000
20.0.0.1 IP address 255.255.255.0
source of Loopback10 tunnel
tunnel destination 20.0.2.1
!
interface FastEthernet0/0
Description * inside the LAN CONNECTION *.
address 192.168.20.1 255.255.255.0
IP nat inside
automatic duplex
automatic speed
!
interface Serial0/0
Description * INTERNET ACCESS *.
IP 88.12.45.1 255.255.255.252
NAT outside IP
VPN crypto card
!
interface FastEthernet0/1
no ip address
Shutdown
automatic duplex
automatic speed
!
Router eigrp 1
network 20.0.0.0
No Auto-resume
!
overload of IP nat inside source list NAT interface Serial0/0
IP classless
IP route 0.0.0.0 0.0.0.0 Serial0/0
no ip address of the http server
!
!
NAT extended IP access list
deny ip 192.168.20.0 0.0.0.255 192.168.200.0 0.0.0.255
deny ip 192.168.20.0 0.0.0.255 192.168.300.0 0.0.0.255
deny ip 192.168.20.0 0.0.0.255 192.168.100.0 0.0.0.255
ip licensing 192.168.20.0 0.0.0.255 any
list of IP - VPN access scope
permit ip host 20.0.2.2 20.0.2.1
!

Config PIX

====================

PIX Version 7.2 (4)
!
pixfirewall hostname
names of
name 20.0.2.2 B_LOOP
name 88.12.45.1 B_WANIP
!
interface Ethernet0
Description * LINK to ISP *.
nameif outside
security-level 0
IP 83.1.16.1 255.255.255.252
!
interface Ethernet1
Description * LINK TO LAN *.
nameif inside
security-level 100
IP 192.168.50.1 255.255.255.252
!
passive FTP mode
the ROUTER_LOOPS object-group network
network-object 20.0.2.0 255.255.255.252
access allowed extended VPN ip host 20.0.2.1 B_LOOP list
access-list extended SHEEP permit ip host 20.0.2.1 ROUTER_LOOPS object-group
Access ip allowed any one extended list ACL_OUT
pager lines 24
Outside 1500 MTU
Within 1500 MTU
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global (1 interface external)
NAT (inside) 0 access-list SHEEP
NAT (inside) 1 192.168.50.0 255.255.255.252
NAT (inside) 1 192.168.50.0 255.255.255.0
Access to the interface inside group ACL_OUT
Route outside 0.0.0.0 0.0.0.0 83.1.16.2 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp - esp-md5-hmac VPN
86400 seconds, duration of life crypto ipsec security association
VPN 5 crypto card matches the VPN address
card crypto VPN 5 set pfs
card crypto VPN 5 set peer B_WANIP
VPN 5 value transform-set VPN crypto card
card crypto VPN 5 defined security-association life seconds 28800
card crypto VPN outside interface
crypto isakmp identity address
crypto ISAKMP allow outside
crypto ISAKMP policy 5
preshared authentication
the Encryption
md5 hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
tunnel-group 88.12.45.1 type ipsec-l2l
IPSec-attributes tunnel-group 88.12.45.1
pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!

When you create a GRE tunnel between two routers, there should be a routing decision to reach the Remote LAN through local (rather than exit directly the physical interface) tunnel interface.

This could be accomplished by EIGRP, but you can check if the adjacency is built.

As a test, what happens if you add a static route saying (reach remote LAN, sending traffic to the tunnel interface).

Check if the GRE tunnel comes up with sh interface tunnel

Federico.

Secure tunnel

try to get an understanding of the parameters inside the view I read the Administrator's guide. Under view connection, Tunnel Secure HTTP (S) here and then an external box for URL. What from internet connections or LAN clients also make use of this external address? The secure tunnel is checked in my setup and the external address is my connection servers full domain name, but I don't know if it is the default, or if someone in my Department and checked
-MN

The secure Tunnel and "External URL" is used in case you want to configure remote access to your environment from view.

If your reviews and virtual offices are on the same internal network, you don't need to use the secure tunnel or the PCoIP Secure Gateway so the two options can be unchecked. Your customers view will then connect to a virtual desktop (via PCoIP or RDP) directly.

If you want to configure your environment view accessible via the Internet, then you need these two checked options and you will need configure and understand the external use of the parameters "External URL" and "PCoIP URL." The 3 steps to the setting of this place are described here http://communities.vmware.com/docs/DOC-14974 and there is also a video that explains this configuration in detail. It also has an example of how all these parameters are used in a configuration of remote access.

I hope this helps.

Select this option.

My Macbook Pro has been hacked by trolls - how to secure my computer? How can I get rid of the trolls?

My Macbook Pro has been hijacked by trolls in my country of origin of Western Australia - how to secure my computer? How can I get rid of the trolls? All boards of the community would be welcome. For example, I know that trolls are and why they do it, but the police are interested in these "questions"?

Just what evidence do you have that yo have been hacked?

Viruses, Trojans, Malware - and other aspects of Internet Security

https://discussions.Apple.com/docs/doc-8573

Effective defenses against software malware and other threats

https://discussions.Apple.com/docs/doc-8841

I have a home wireless network that is not safe. Need step by step instructions on how to secure.

I have a home wireless network which is not safe, the instructions need step by step how to secure.

Password protect to avoid any other login.

http://www.ehow.com/how_5043404_password-protect-wireless-router.html

How do we install VPN on Server 2008 R2?

How do we install VPN on Server 2008 R2 edition?

I followed so many tutorials on youtube but doesn't seem to work!

My goal is to be able to give access to my server remotely and access shared files and folders that I have activated. The only way I can think of is VPN, but do not know how to set up. All the methods that I read on google do not seem to work for me.

These MS Answers forums are intended for the home rather than the it professional user. Please transfer your question in the relevant Microsoft Technet forum here:

http://social.technet.microsoft.com/Forums/en-us/category/windowsserver .

Thank you. :)

(I'm sorry, but I can't move this thread for you because the two forums are working on separate platforms)

How to secure my WRT100/Linksys router

How to secure my router WRT 100 again...

for detailed instructions, click on this link

http://www6.nohold.NET/Cisco2/UKP.aspx?VW=1&docid=cfb50c0dc992443ab2405a782cca60f7_19073.XML&PID=96&...

How to create a VPN file .pcf for the CISCO VPN CLIENT software profile

Dear all

How to create a VPN file .pcf for the CISCO VPN CLIENT software profile

Concerning

Hi Imran,

Can't do much about that because it depends on what authenticate you the VPN server and how the settings. But let me introduce you to the memory layout. Once you install and open a VPN client. Press it again and it opens up a new page for the VPN config.

Example of configuration as it is attached. But it differs depending on the configuration of your vpn server.

Once you create and save this profile. Your FCP file is stored.

Please assess whether the information provided is useful.

By

Knockaert

Tunnel VPN and NAT

Hello. I'm creating a tunnel VPN IPSec LAN - to - LAN of my ASA5510 to another network but met an obstacle bit. My counterpart on the other side has informed me that he already has a VPN tunnel to another company that has the same IP range as my network(10.100.16.0 /24) and can not create the tunnel.

I was wondering is it possible to use NAT on the VPN tunnel so that traffic that goes from my network over the VPN tunnel gets translated and my counterpart on the other side sees this reflects the range of IP addresses?

Thanks in advance for any help.

Hello

Yes, you can use the same address you already use for internet access.

Just update your list of access crypto to reflect the new address and to ensure that the third party did the same.

Jon

How to secure Tunnel VPN

Similar Questions

Maybe you are looking for