Automatic text in the form resizing does not work

Similar Questions

• Continue to try to turn on my firewall, but won't automatically and using the manual option does not work either.

  Continue to try to turn on my firewall, but won't automatically and using the manual option does not work either.  Can repair you.

  Hello
  Follow these instructions:
  Download and install Windows Repair:
  http://MajorGeeks.com/tweaking.com_-_Windows_Repair_d7141.html
  When the repair of Windows opens, click on the tab to start repairs, click Start. Uncheck all boxes except for the following:
  -Reset the registry permissions
  -Reset the permissions of files
  -WMI repair
  -Repair Windows Firewall
  Then click Start. Once it is finished, restart your computer. Let us know if that helps you.
  Brian

• The form page does not work probably

  Hi guys,.
  
  When you edit a record in interactive report, I had a problem to extract the values of their elements in the page of the form. All of the items get the correct values with the exception of two items that get their values from the beginning of the file that I edited as I opened the application.
  What could be the problem?
  
  Best wishes.
  
  PLS, if the question is not clear, so let me know
  
  Published by: Fateh June 10, 2011 12:23 AM

  Just an idea that go to your article, which is not fresh values and make sure that under Source, you should have:

  Always, replacing any existing value in session state 
  

• automatic search in the address bar does not work

  I used to be able to type a word in the address bar (or rental) and I would like to get done for the best site that google might think. If I typed 'dogs' in there and press ENTER, I would go to the dog of wikipedia page. If I type "hotmail", I'll get sent to hotmail.com. This happens either. Now I just get the google search results for the keyword that I entered. I tried to go to about: config and ensuring that the keyword.url is default and I tried different things with the browser.fixup stuff, but nothing works. All this happened when I updated firefox too, so I think that's the problem. What can I do to fix and recover?

  You can change the pref keyword. URL on the topic: config page to use Google's "I'm Feeling Lucky" or "Browse by name" Google.

  • "I'm Feeling Lucky" Google: http://www.google.com/search?btnI=I%27m+Feeling+Lucky & ie = UTF - 8 & oe = UTF - 8 & q =
  • Google "Browse by name": http://www.google.com/search?ie=UTF-8 & sourceid = navclient & gfns = 1 & q =
  • http://KB.mozillazine.org/keyword.URL
  • http://KB.mozillazine.org/Location_Bar_search

• Why the highlighting of text in a PDF document does not work after you save the file

  Why the highlighting of text in a PDF document does not work after you save the file

  What application you use to highlight?

• text of the e-mail does not appear in hotmail or gmail in Firefox, but it does in internet explore

  A part of the text in e-mail from a particular sender does not at all appear in gmail or my hotmail in Firefox e-mail account. When I go to the same email using Internet Explorer, all the text is there. I tried the email viewing with disabled modules, and that did not fix the problem.

  Thanks for the message. The Inspector indicates that the message consists of a large number of tags nested inside of each other. (Screenshot attached)

  I don't see any purpose to have so many tags nested inside one another, because they are very repetitive, but many creation tools make no effort to write good HTML as long as it works in IE.

  The problem is that Firefox is not by not showing what it is rather than is not showing an image of plain text, as you saw when you paste into a word processing document. At least then you would know when something is missing. I don't know if/when that will be fixed, this is a known issue for some time.

  The redirect solution does not work on Gmail rich text/HTML mode, but if you switch to plain text mode, the list without style appears as a piece of text (screen attached). Not very useful, but it is there in a pinch.

  Sorry I don't have a good fix for the moment.

• The "Send form" button does not work in Chrome or Safari PDF viewer

  I have created a PDF file and have included a button 'Submit' at the bottom of the page. When all required fields are completed, hit Submit attached the document in an e-mail message to us. The only problem is that this 'submit' function only works when you view the document in Adobe Reader.

  Given that the form located on our Web site, when the link is clicked it opens upwards by default in Safari or Chrome PDF Viewer for the browser (etc.). Unfortunately, the 'Submit' function does not work in the browser view. The fields are to be filled, but the Send button does not work.

  Suggestions?

  These browsers display PDF files using their own internal PDF plugin. You should report bugs with these plugins to their creators.

  It has nothing to do with Adobe.

• When I complete and sign a form and then print it out, the form data does not print.

  When I complete and sign a form and then print it out, the form data does not print. The form fields are empty with the exception of any signature.

  Thank you. Depending on your answer, I have compiled a procedure:

  Fill & sign a form in Adobe CD and print the form fields:

  (1) open the document.

  (2) click on tools - prepare the form. All fields are displayed in a vertical list in the bottom right of the screen.

  3) click on the first field in the list, scroll to the bottom of the list and shift-click to select all.

  4) click on the first field in the document, make a right click, select Properties.

  (5) on the general tab, uncheck the box locked in the lower left corner. Under field properties common form, select Visible and uncheck the read-only box, close.

  (6) print out and save the file.

  Note: even if you select all the fields in the document in step 3, this procedure may work for the fields on page 1. In this case, repeat steps 3 through 5 for each subsequent page.

• Firefox automatically updated itself, would not add new bookmarks, then deleted all mine, will not always add new, now the back button does not work. I'm Livid.

  I think I'm on Firefox 13.0. He put itself as part of the update of my computer up to date (at least I guess that's what happened, because it has changed). I noticed yesterday that he would not favorite Web sites, but I thought it was just the website or bookmarks have been full-time or something. Today, I tried to remove a few bookmarks to make more, but they would not remove. I tried to register a new site, and it wouldn't work. I tried to close/exit firefox and re-opening of the program. While the program was closed, I installed the next set of updates on my computer. When I have opened firefox, all my favorites, and the tab menu (or what you call personal small bar on the actual tabs) were gone. I can't always favorite of new sites, so I can't even re-do all my favorites (and I got a lot, all of them arranged so it's a big loss and incredibly annoying). Then I realized that the back button does not work. And the cursor remains on the typing that I symbol, it does not change the arrow, when I click on a link.

  One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

  You can also try to repair the database of places with this extension:

  • https://addons.Mozilla.org/firefox/addon/places-maintenance/

• my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

  my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Step 1

  VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

  Step 2

  When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Step 3

  In the LaunchDaemons folder, there may be one or more files with the name of this form:

  com Apple.something.plist

  When something is a random string, without the letters, different in each case.

  Note that the name consists of four words separated by dots. Typical examples are:

  com Apple.builins.plist

  com Apple.cereng.plist

  com Apple.nysgar.plist

  There may be one or more items with a name of the form:

  com.something.plist

  Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

  These names consist of three words separated by dots. Typical examples are:

  com.semifasciaUpd.plist

  com.ubuiling.plist

  Sometimes there are items (usually not more than one) with the name of this form:

  com.something .net - preferences.plist

  This name consists of four words (the third hyphen) separated by periods. Typical example:

  com.jangly .net - preferences.plist

  Drag all items in the basket. You may be prompted for administrator login password.

  Restart the computer and empty the trash.

  Examples of legitimate files located in the same folder:

  com.apple.FinalCutServer.fcsvr_ldsd.plist

  com Apple.Installer.osmessagetracing.plist

  com Apple.Qmaster.qmasterd.plist

  com Apple.aelwriter.plist

  com Apple.SERVERD.plist

  com Tether.plist

  The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

  Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

  If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

  Step 4

  Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  Step 5

  The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

  Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

  Step 6

  This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

• Unexpected error in the property page. The VSS service uses the system restore does not work. Error (0 x 810000202). __

  original title: "there was an unexpected error in the property page. The VSS service uses the system restore does not work. For more information, see the journal of events (0 x 810000202). __

  "There was an unexpected error in the property page. The VSS service uses the system restore does not work. For more information see log of events (0 x 810000202).

  Please try the troubleshooting below to check the status of the shadow copy Volume service

  1. click on start > all programs > Accessories > run

  Type the following text in the run window, and then click ok:

  Services.msc

  You will get the Services window.

  2. Please check service Volume shadow copy service is "started" and "automatic".

  If these services are not set to "Started" and "Automatic", please, do a right-click on the service and select "Properties".
  On the window properties, please change the startup type to automatic, and use the Start button to start the service.

  Click on apply, click ok.

  Close the Services window

  Restart the computer and check if the problem occurs again.

  If the problem persists, start your computer in safe mode and try to do a restore of the system again. Temporarily disable your anti-virus protection

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  I hope this helps
  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Auto form fill does not work in Google

  I updated Firefox to 8.0 days and everything was OK, but today I discovered this forms AutoComplete does not work in google (it works on other sites, however). I checked through form story addon that historical form has not been deleted, it's just the auto form fill that do not work. This happens on both my work and home computer. From FF in safe mode (with extensions disabled) does not help.

  It works to disable JavaScript. Or using the URL http://www.google.com/webhp?complete=0 . Kinda weird, but seems to be the issue of google anyway.

• I have a Hp and the micro build does not work how to fix this?

  Can someone help me please? I have a HP T5800 and the micro build does not work how can I solve this problem?

  Hello

  Check with HP, their drivers support and documentation online and ask in the forums about known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ========

  It's probably the pilots who are responsible and who may not really be later or they need to be
  re-installed anyway. The best way is to manually review using the methods below.

  References to Vista also apply to Windows 7.
  
  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek High
  Audio definition (this is an example and you can have an other name/maker).

  Write the description and the model double click on it - tab drivers - write down
  Version. Now click on update drivers who cannot do anything as MS is far behind certifying
  drivers. Then CLICK RIGHT on it and UNINSTALL - REBOOT - this will rebuild the driver
  stack.

  You can have the default windows or a former certified pilot and it's all or part of the
  issue.

  Now, go to the site of the manufacturer of the system and get the latest Audio/Sound drivers - download - SAVE - go to
  where you put - right-click on Reboot - RUN AS ADMIN-

  Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
  and then install the latest version. Restart and check after each test, not
  rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
  installed shows upward on the tab of the driver.
  
  Go to the site of the manufacturer of the device, and then search for the even more recent drivers and install repeat
  operating mode. Download - SAVE - go to where you put them - click on - RUN AS
  ADMIN - Reboot

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (updated drivers manually using the methods above is)
  to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check see the
  Disconnected devices and show disabled devices - check your micro - highlight
  then on lower right properties. Make sure that the appropriate injector is selected and check
  other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  The volume of the audio recorded by sound recorder in Windows Vista or in Windows 7 is less than
  in Windows XP (or Vista)
  http://support.Microsoft.com/kb/973446

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Connection problem: The DHCP service does not work.

  Original title: connection problem

  After got rid of a virus, my computer is always trying to get the network address. I found that the DHCP service does not work on my computer. How can I reinstall. I am running windows xp service pack 3

  Hello

  Follow these steps and check if they help.

  Step 1:

  Look for the DHCP Client service and DNS Client Services if they are started.

  a. Click Start.
  b. click on run and type Services.
  c. click right on - run as administrator.

  Check if the below mentioned services has mentioned State and type start.

  Client DHCP started Automatic\Manual.
  Client DNS started Automatic\Manual.

  Also check the dependency that are required for the DHCP Client services and DNS Client Service runs.

  To verify that double-click the service, and click the Dependencies tab.

  Step 2:

  I suggest you to reset TCP/IP settings to solve the problem.

  How to reset the Protocol Internet (TCP/IP)

• Monitoring the progress of the web page does not work...!

  Hello!

  I'm putting the text of the label during the loading of the webview... But the code example in the documentation does not work...! The code example is given below.

  Container {
                  Label {
                      id: statusLabel
                      leftMargin: 10
                      text: "No webpage yet."
                  }
                  WebView {
                      id: myWebView
                      url: "http://developer.blackberry.com"
                      onLoadingChanged: {
                         console.debug("onLoadingChanged is called..........................");//printed in console
                         //below statements are not changing the text of the label.
                          if (loadRequest.status == WebView.LoadStartedStatus) {
                              statusLabel.setText("Load started.")
                          } else if (loadRequest.status == WebView.LoadSucceededStatus) {
                              statusLabel.setText("Load finished.")
                          } else if (loadRequest.status == WebView.LoadFailedStatus) {
                              statusLabel.setText("Load failed.")
                          }
                      }
                  }
              }
  

  I tried with statusLabel.text, but this one also does not work...! If anyone knows please answer me... !

  -Looks

  Riadh

  The documentation in the https://developer.blackberry.com/cascades/reference/bb__cascades__webview.html#loadingchanged suggest that you use one of the constants badly.  See if you use, for example, WebLoadStatus.Started not work better...