Automatic width control multi-column (new) Listbox

Similar Questions

• Is it possible particularly handy/quick to disable controls (multi-column listbox) when executing the output material associated?

  Please excuse me if the title of the post is not clear, I would try to explain what I need to do here.

  In the application, I am currently in train, UI use multi column listboxes in several places where a set value (one line) is selected, and based on the rowset / selected, relay/material are enabled to match a given configuration (which is then verified with your comments).  The problem is, I can easily rush into the user interface and make program stuttering and choke...

  I just put my finger down in one of the rows in the listbox control and drag my finger up and down the screen as a 5 year old child see a touch screen for the first time - he tries to each entry cache/buffer.  After I stop being 5 years old again I sit and listen to the click click of the relay for a bit.  One of these list boxes, I've already implemented enable and disable to pieces of code to implement the right before the digital output and solve the controls right after that feedback has been verified.  It was kind of a pain to do, so I wonder if there is an easier way to do it.

  Any idea or suggestion appreciated!

  Thank you

  -Pat

  PS - i As training until this weekend so I will probably not be quick to answer, but still thx for any info

  Use a "Mouse Up" event instead of an event of "change the value.

• Programmatically change the selected cell/line of control multi-column listbox

  I want to programmatically change the selected cell of a multicolumn list box whose selection Mode is set to highlight the whole line.  I would use this to highlight the line whatever the list box, I chose to.  It would work the same way if the user has clicked on a line to select and highlight that particular line.  Set Active cell does not fulfill this.

  Steve

  Try to use the property value; p

• Inreractive report: Your control multi-column

  Hi guys an girls,.
  
  I have an interactive report on an application I built. I asked if it is possible to order by more than one column.
  
  Is what I mean by that, when I click on the column heading, I can order this column in ascending or descending order. Is it possible to order by more than one column?
  
  Thank you
  -N.S.N.O.

  Hello

  Yes you can. Simply choose 'Sort' menu options.

  --
  Paulo Vale
  http://Apex-notes.blogspot.com

• How to create a multi column list control?

  

  Currently is a single-column listbox using StdListBoxWidgetN.

  How to create a multi columns as an image list control?

  What I see a sample? or add any source?

  Thanks for help.

  You must use the TreeView Widget.

  See the example persistentlistui or wlistboxcomposite in the sdk.

• How to customize the scroll and symbols bars in a multi column list box

  Hello

  I have recently been design FP and have gotten to a scroll bar in a multi column list box.

  How can I change the decals and colors of the scroll bar as I can't seem to change or select all components of it within the control editor.

  I would change the arrow buttons and arrow the cursor with a custom sticker and have a solid track. In adition to that, I would like to change some of the symbols or add my own custom in the existing list.

  Is this possible to do?

  carbon32 wrote:

  Hello

  I have recently been design FP and have gotten to a scroll bar in a multi column list box.

  How can I change the decals and colors of the scroll bar as I can't seem to change or select all components of it within the control editor.

  I would change the arrow buttons and arrow the cursor with a custom sticker and have a solid track. In adition to that, I would like to change some of the symbols or add my own custom in the existing list.

  Is this possible to do?

  I don't think that you can customize parts of the scollbars.

  Here how to add symbols to a listbox control. The new index of symbols must last for 41 as the indices of standard symbols are included between 1 and 40. The size of your custom symbol must be 16 x 16.

  

  Ben64

• By programming the auto scroll value multi-column list boxes?

  I have a Multi column list box control that I put off (for indication only) which is used to show the progress.

  When a profile is loaded in the list box if this profile causes the scroll bar to become active it's obviously disabled and if the user cannot scroll

  That the control is disabled, the scroll bar is also disabled is there anyway that I can programmatically on the AutoScroll scroll bar?

  Hello

  You can use the property of the listbox multicoum ' cell upper left Visible.

  If your listbox multicoloum is disabled you can put vertical cursors or something on the front and give the value of the cursor to the line/Coloum (vertical scrollbar) and Coloum for the horizontal scroll bar to the "cell upper left Visible.

  Hope this helps

  Concerning

  David

• How can I keep the width of the columns (1) and (2) a header when you replace a table?

  I am trying to format a series of paintings using simple Excel files and two columns that look like this:

  

  I have already created a table style, but I find myself relating to two additional steps each time I replace the existing data with a new Excel file:

  Challenge #1: Manually set the width of each column to 3 inches.

  Challenge #2: Manually convert the top row a header.

  Each of these tasks only takes a few seconds to set up, but I'll have to make hundreds of them and the time adds up. Here's my existing workflow:

  1. Select the existing table, properly formatted.

  

  2 file > Place... (Replace the item selected and The show Import Options checked)

  

  3. import in an unformatted Table using the custom Table Style 1 created for this document.

  

  Note: Once fell, the width of the previous columns is lost and there is no identified header:

  

  4. I manually adjust the width of the columns to 3 inches.

  

  5. Finally, I converted the top row a header.

  

  Result is a perfectly formatted table, exactly 6 inches wide, each column taking up half the width.

  

  Ideas to keep the width of column after replacing the Excel file and/or fit automatically in the top row, as a header would be greatly appreciated!

  Something like this should do the trick. Copy the script in a text editor, save with the extension .jsx and put in your folder of InDesign scripting. If you do this a lot, it would be useful to assign a shortcut to the script key.

  To use, place your cursor in a table cell, or select a cell or a line and run the script.

  //BS"D
  // Copyright (c) 2015 by www.Id-Extras.com
  // Free to use, but please do not remove this notice.
  myTable = app.selection[0].parent;
  if (!myTable instanceof Table){
    myTable = myTable.parent;
  }
  if (!myTable instanceof Table){
    alert("Select a cell or place your cursor in a cell, and try again");
    exit();
  }
  myTable.columns.everyItem().width = "3 in";
  myTable.rows[0].rowType = RowTypes.HEADER_ROW;
  

• Report multi columns

  Helllo,
  
  I use the Application Express 3.1.2.00.02
  
  I want to do a report 3 columns.
  
  I just saw this thread (2005 - that's why I started a new)
  Report multi columns
  
  When I applied the model to my region to report, I got the following error:
  
  ERR-1025 error processing PL/SQL expression. MOD 0 (1,3)
  
  Can someone tell me why?
  
  Thank you
  
  Roseline
  
  **********************************************
  
  My query - select ename from EMP
  
  The model I created by steps:
  
  Create a report line model...
  Workspace > Application Builder > shared components > Themes > models... Create
  Model Type: report
  Method of creation: from scratch
  Name: A field - three columns
  Theme: your choice
  Template class: Standard
  Model type: named column (model line)
  
  Edit the sample report, you just create and change the following:
  Model of line 1: < td width = "150" > #1 # < table >
  Model line Condition: use based on the PL/SQL Expression
  Template line 1 Expression: mod (#ROWNUM #, 3) 0
  Line 2 model: < td width = "150" > #1 # < table > < /tr > < tr >
  Model line Condition: use based on the PL/SQL Expression
  Model line 2 Expression: mod (#ROWNUM #, 3) = 0
  
  Before lines: < tr >
  Lines back: < /tr >
  
  Create a query based region report. For my test, I used "select ename from emp". Have the report use the line template.
  
  It is just a quick sample and dirty. For a better look, you will need to do your own formatting...

  You can not just repeat mod (#ROWNUM #, 3) = 0 in all conditions - b/c who take them just like you saw. You need different lines on each.

  If you run this query, you will see why you get only 4 rows:

  SELECT 'EMP ' || ROWNUM,
         CASE
           WHEN MOD(ROWNUM, 3) = 0 THEN
            'EMP ' || ROWNUM
         END col
    FROM dual
  CONNECT BY LEVEL < = 12
  

  I think you should change to something more like this:

  Condition 1: MOD(ROWNUM, 3) = 1
  Condition 2: MOD(ROWNUM, 3) = 2
  Condition 3: MOD(ROWNUM, 3) = 0
  

  I have not tested it out but try it

• Add row in table or list multi-column

  Hello

  I discovered Labview (version 8.6) and I am trying to create a program of asquisition of data pour a shock absorber test bench.

  I collects the data and table classes in UN, AND cre a XY graph pour display a Representative force of the shock curve depending on the speed of movement of the stem. Until there all right!

  My problem is that I want that when the cycle is done en continue, new data appears on the next line instead of "crush the Report values as is currently the case. I tried with the tool 'table' and the 'multi-column list' tool but the problem is the same: How do I do?

  It happens that I have the same problem to display the curves on my XY graph, I also need help pay this problem.

  Please pour your attention and your help.

  Kind regards

  Jeremy

  PS: If my spouse VI to image the problem.

  Hello Jeremy,

  First of all, I would like to know what you mean by en run continue? If you specify normal here the double arrow d "performance, I would like to inform you that it must be used only when debugging your application, pour allow you to change values on orders without having to continually again l ' execution of your vi.

  If you want that your program runs continuously, you can add a loop around your code, with a STOP button for example to stop it.

  Then, if you get to write a single line, it is because although you creating a table 2D of your data before sending it to the node of the list property, this table is filled by a single column.

  You will find attached your slightly modified VI pour integrate a loop at the level of the acquisition.

  I used a tunnel with auto-indexation, which allows you to create a new row in the table 2D at each iteration of the loop. It's a simple way, but is not particularly the best, you can also set up your creations of table functions in the loop. In the same way, it will take maybe add functions of timing in the loop, but in your case, I think that the acquisition it even cadencera the execution of the loop.

  The report will be completed once you have clicked the STOP button.

  This solution of hoping to match your need.

  Kind regards

• Linking list multi columns selections in ScriptUI

  Hello

  I have a script that has 8 columns and the elements of each column array.

  I want to do an onClick function which selects all items in the same index position in each column.

  Here's the script:

  var w = new window (' dialog {text: 'Blatchford termbase', alignChildren: 'fill'} "");
  Alert ('Welcome to Blatchford Termbase.\nDouble click on a term to be able to copy and paste it into your document.");
  w.Spacing = 0;

  var headers = w.add ('group');
  headers. Spacing = 0;
  headers. Margins = [0,5,0,0];
  dimH var = [0,0,200,30];

  headers. Add ("statictext', dimH, '\u00A0English'");
  headers. Add ("statictext', dimH, '\u00A0French'");
  headers. Add ("statictext', dimH, '\u00A0German'");
  headers. Add ("statictext', dimH, '\u00A0Italian'");
  headers. Add ("statictext', dimH, '\u00A0Spanish'");
  headers. Add ("statictext', dimH, '\u00A0Norwegian'");
  headers. Add ("statictext', dimH, '\u00A0Russian'");
  headers. Add ("statictext', dimH, '\u00A0Turkish'");

  headers.graphics.backgroundColor = w.graphics.newBrush (w.graphics.BrushType.SOLID_COLOR, [0.5,0.5,0.5],2);

  headers. Graphics.font = "Arial bold: 24;

  var column = w.add('group{multiselect:true}');
  Columns.Spacing = 0;

  CGEM var = [0,0,200,600];

  var col1 = columns.add ("listbox", CGEM, //English
  [' Chassis 1) 4 bolt ",]
  "Activity level 2).
  "3) add ' for a your dark foot shell."
  "(4) alignment.
  "(5) unusual noises.
  "(6) earlier."
  "(7) anti Rotation characteristic."
  "8) py move too far back."
  "9) py move too far forward,"
  "(10) application."
  "Assembly instructions 11)."
  "(12) available from size 22 to size 30.
  "Alignment of base 13)."
  "Biomimetic adjustment 14)."
  "Biomimetic 15) alignment.
  "(16) Blatchford Products Ltd. and ENDOLITE are companies and trademarks of Chas. A. Blatchford and Sons Ltd."
  "(17) building height."
  "(18) build the line.
  "Pylon 19) dynamics."
  "Compliance of 20) THIS."
  "(21) variations of performance may include,:
  "(22) check alignment of base and height of the heel."
  "(23) cleansing."
  "The clinician 24 Handbook).
  "Weight 25) component.
  "(26) construction."
  «(27) contraindications:»
  "(28) description and purpose."
  "Adjustment 29) dynamics."
  "(30) environment."
  "(31) extra large."
  "(32) fall back",
  '33) falling forward',
  "Fitting length 34)."
  "Foot 35) shell."
  "(36) function."
  "(37) sock glide."
  "(38) guidance."
  "A hyperextension 39)."
  "(40) hyperextension."
  "(41) identification of components."
  "(42) increase in the stiffness in the ankle."
  "(43) operating instructions."
  "(44) intended to single user,"
  "(Life 45) planned."
  "46 product features) keys."
  "(47) wide."
  "(48) liability."
  "(49) lifting."
  "(50) limitations on use.
  "(51) interview."
  "Weight 52) maximum of the user."
  "(53) average."
  "Knee Mercury 54)."
  «(55) Note:»
  "Operation 56) and storage temperature.
  "Example order 57)."
  "(58) later."
  "(59) main parts."
  "(60) proximal connection."
  "(70) recommended level of activity."
  "(71) reduced their ankle support (free movement)."
  '72 safety instructions).
  "Service 73) regular in 20 months."
  "Catalog Endolite 74) see for more details.
  "(75) side."
  "(76) size."
  "(77) size scope."
  "(78) small,.
  "(79) Technical Data."
  "(80) these instructions are used by the clinician/practitioner."
  "81) to be used exclusively in the context of a lower limb prosthesis",
  "(82) trans-femorale."
  "(83) trans-tibiale."
  "(84) trochanter."
  "(85) user guide."
  "(86) guaranteed for 3 years."
  "(87) guarantee']);
  var col2 = columns.add ("listbox", CGEM, ["Dorsiflexion", "Field", "Party", "Transfémoral"]);        French
  var col3 = columns.add ("listbox", CGEM, ["Dorsiflexion", "Field", "Trans-tibiale", "Trans-fémorale"]);      German
  var col4 = columns.add ("listbox", CGEM, ["Dorsiflexion", "Field", "Transtibial", "Transfemorale"]);     Italian
  var col5 = columns.add ("listbox", CGEM, ["Dorsiflexion", "Field", "Party", "Security"]);        Spanish
  var col6 = columns.add ("listbox", CGEM, ["Dorsiflexion", "Field", "Party", "Security"]);      Norwegian
  col7 var = columns.add ("listbox", CGEM, ["Dorsiflexion", "Field", "Trans-tibiale", "Trans-fémorale"]);      Russian
  var col8 = columns.add ("listbox", CGEM, ["Dorsiflexion", "Field", "Party", "Security"]);      Turkish

  
  col1. Selection = 0;

  {col1. OnDoubleClick = Function ()}
  entry. Text = col1. Selection;
  };
  {col2. OnDoubleClick = Function ()}
  entry. Text = col2. Selection;
  };
  {Col3.OnDoubleClick = Function ()}
  entry. Text = Col3.Selection;
  };
  {Col4.OnDoubleClick = Function ()}
  entry. Text = Col4.Selection;
  };
  {col5. OnDoubleClick = Function ()}
  entry. Text = col5. Selection;
  };
  {col6. OnDoubleClick = Function ()}
  entry. Text = col6. Selection;
  };
  {col7. OnDoubleClick = Function ()}
  entry. Text = col7. Selection;
  };
  {COL8. OnDoubleClick = Function ()}
  entry. Text = COL8. Selection;
  };

  var user_input = w.add ('group')
  entry var = user_input.add ("'edittext', dimH, ' click on the button to the right to convert lowercase");
  entry. Characters = 30;
  entry. Alignment = 'left';
  entry.active = true;

  
  

  converting the vars = user_input.add ('button', undefined, "Convert to lowercase");
  convert.onClick = function () {entry.text = entry.text.toLowerCase () ;}
  user_input.orientation = 'row';
  user_input. Alignment = 'left';

  If (w.show () == 1) {}
  (alert ('Welcome to Blatchford Termbase.\nDouble click on a term to be able to copy and paste it into your document."));
  } else {}
  Alert ("thank you come again")
  }
  

  I want to make this hat so I don't need the numbers in the table for col1.

  Any advice would be great!

  This function updates the French column when you click in the English column (only on the first 4 points, however, otherwise you will get an error that there is no matching element in the French).

  col1. OnChange = function() {}

  col2. Items [col1. Selection.index] .selected = true;

  }

  Do the same for the other columns.

  But it would be a good idea to use a chart to show all the columns instead of separate variables (col1, col2, etc..)

  In this way, you could just browse all columns, instead of typing all individually. And you can easily add columns if necessary, or delete, etc..

  Ariel

• Width of the column label on css bar graph plugin

  Hi all

  Relatively new to the APEX.  Using the version 4.2.4.  I copied the CSS bar graph plugin which is used in the Bug Tracker demo app in my application and who uses it.  I'm very happy with the results except for one thing - the column label.  The label is truncated.  Is there a way to adjust the width of the column label in the table so that truncation does not or dressing it?  Please see screenshot.  Thank you in advance.

  

  user2071886 wrote:

  Please update your forum profile with a recognizable username instead of "user2071886": Video tutorial how to change username available

  Always include the information referred to in these guidelines when you post a question: How to get the answers from the forum

  Relatively new to the APEX.  Using the version 4.2.4.  I copied the CSS bar graph plugin which is used in the Bug Tracker demo app in my application and who uses it.  I'm very happy with the results except for one thing - the column label.  The label is truncated.  Is there a way to adjust the width of the column label in the table so that truncation does not or dressing it?

  Add the following CSS to replace the rule of the Inline CSS property page to extend the space allowed for labels:

  div.cbc table.cbc th span.cbc_label {
    max-width: 220px !important; /* Adjust dimension as required */
  }
  

  Please see screenshot.

  Note that reproduce the problem with an example on apex.oracle.com that can be seen in its entirety and experience is a much better way to obtain help with Visual formatting and layout problems displaying a static screen shot.

• Set the width of a column in report?

  I was at half griping on the definition of the column width so it's just that I'm actually looking for a simple example.
  
  I have a simple report on a query (Select * from demo_st) based on a model of report area. The columns that are displayed are the primary key (RCD_ID), ST (state abbreviation) and the ST_NM (state name). The names of States are size 4 to n characters and I added an 'example' AAA AAA AAA AAA AAA AAA AA entry just so I would have a long. I don't want to control the width of the column ST_NM.
  
  Please visit: http://apex.oracle.com/pls/apex/f?p=66049:2 Dever / Ima9Dever
  
  First of all, I have the updated example up properly? For example, I do something that prevents the control from the ST_NM column width?
  
  Second, if the example is configured properly, is there a limit (say, < 6) below which I can't control the width.
  
  In the definition of column ST_NM, I placed 5 width of column and in the attributes column, I put 5 in the width of the element.
  
  I was expecting the column ST_NM width 5 characters long, but it makes it just like before.
  
  I do something that prevents this column truncation (or envelope)?
  
  Thanks in advance,
  Howard

  Howard (DBA in training) wrote:
  I was at half griping on the definition of the column width so it's just that I'm actually looking for a simple example.

  I have a simple report on a query (Select * from demo_st) based on a model of report area. The columns that are displayed are the primary key (RCD_ID), ST (state abbreviation) and the ST_NM (state name). The names of States are size 4 to n characters and I added an 'example' AAA AAA AAA AAA AAA AAA AA entry just so I would have a long. I don't want to control the width of the column ST_NM.

  Please visit: http://apex.oracle.com/pls/apex/f?p=66049:2 Dever / Ima9Dever

  First of all, I have the updated example up properly? For example, I do something that prevents the control from the ST_NM column width?

  Second, if the example is configured properly, is there some limit (for example,< 6)="" below="" which="" i="" can't="" control="" the="">

  In the definition of column ST_NM, I placed 5 width of column and in the attributes column, I put 5 in the width of the element.

  I was expecting the column ST_NM width 5 characters long, but it makes it just like before.

  I do something that prevents this column truncation (or envelope)?

  See post on the original thread: + {message identifier: = 10807690} +.

• How to give more relevance to one of the column in multi-column data store

  Hi gurus,
  
  When using multi-column datastore necessary to give more importance to one of the other column. How can we achieve the same?
  

  SQL > create table test_sh4 (text1, text2 clob clob);
  
  Table created.
  
  SQL > alter table test_sh4 Add (Text3 clob);
  
  Modified table.
  
  SQL > start
  2 ctx_ddl.create_preference ('nd_mcd', 'multi_column_datastore');
  3 ctx_ddl.set_attribute
  4 ("nd_mcd",
  5 "columns."
  6 ' replace (Text1, "", "") nd, Text1 text1, replace (Text1, "", "') nd, Text1 text1');
  7 ctx_ddl.set_attribute ('nd_mcd', 'separator', 'new line');
  8 ctx_ddl.create_preference ('test_lex1', 'basic_lexer');
  9 ctx_ddl.set_attribute ('test_lex1', 'spaces', ' /--------|-_ + "");
  10 end;
  11.
  
  PL/SQL procedure successfully completed.
  
  SQL > create index IX_test_sh4 on test_sh4 (Text3)
  indexType is ctxsys.context
  parameters
  ("nd_mcd of the data store
  lexer test_lex1')
  / 2 3 4 5 6
  
  Index created.

  Here, while querying how can I give more relevant for the text1 Text2 column as column?

  I gave an example below. I added some data to your example. You had tags and columns duplicated in your multi_column_datastore, so I fixed it those. I removed the newline delimiter and added a section with sections of field group and add this section to the index settings group. Allows you to search in each section of field and apply different fats. You can apply weights by multiplying by a value entre.1 and 10 or several times multiplier to reduce or increase the score for a particular section.

  SCOTT@orcl_11gR2> -- table structure you provided:
  SCOTT@orcl_11gR2> create table test_sh4 (text1 clob,text2 clob);
  
  Table created.
  
  SCOTT@orcl_11gR2> alter table test_sh4 add (text3 clob);
  
  Table altered.
  
  SCOTT@orcl_11gR2> -- added data:
  SCOTT@orcl_11gR2> insert all
    2  into test_sh4 (text1, text2, text3)
    3    values ('testword', 'word2', 'word3')
    4  into test_sh4 (text1, text2, text3)
    5    values ('word4', 'testword', 'word5')
    6  into test_sh4 (text1, text2, text3)
    7    values ('test word', 'word2', 'word3')
    8  into test_sh4 (text1, text2, text3)
    9    values ('word4', 'test word', 'word5')
   10  select * from dual
   11  /
  
  4 rows created.
  
  SCOTT@orcl_11gR2> -- fixed duplicate column names and tags and
  SCOTT@orcl_11gR2> -- removed newline delimiter and
  SCOTT@orcl_11gR2> -- added section group with field sections:
  SCOTT@orcl_11gR2> begin
    2    ctx_ddl.create_preference ('nd_mcd', 'multi_column_datastore');
    3    ctx_ddl.set_attribute
    4        ('nd_mcd',
    5         'columns',
    6         'replace (text1, '' '', '''') nd1,
    7          text1 text1,
    8          replace (text2, '' '', '''') nd2,
    9          text2 text2');
   10    ctx_ddl.create_preference ('test_lex1', 'basic_lexer');
   11    ctx_ddl.set_attribute ('test_lex1', 'whitespace', '/\|-_+');
   12    ctx_ddl.create_section_group ('test_sg', 'basic_section_group');
   13    ctx_ddl.add_field_section ('test_sg', 'text1', 'text1', true);
   14    ctx_ddl.add_field_section ('test_sg', 'nd1', 'nd1', true);
   15    ctx_ddl.add_field_section ('test_sg', 'text2', 'text2', true);
   16    ctx_ddl.add_field_section ('test_sg', 'nd2', 'nd2', true);
   17  end;
   18  /
  
  PL/SQL procedure successfully completed.
  
  SCOTT@orcl_11gR2> -- added section group to index:
  SCOTT@orcl_11gR2> create index IX_test_sh4 on test_sh4 (text3)
    2  indextype is ctxsys.context
    3  parameters
    4    ('datastore     nd_mcd
    5        lexer          test_lex1
    6        section group     test_sg')
    7  /
  
  Index created.
  
  SCOTT@orcl_11gR2> column text1 format a10
  SCOTT@orcl_11gR2> column text2 format a10
  SCOTT@orcl_11gR2> column text3 format a10
  SCOTT@orcl_11gR2> -- without weighting:
  SCOTT@orcl_11gR2> select score (1), t.* from test_sh4 t
    2  where  contains
    3             (t.text3,
    4              'testword',
    5              1) > 0
    6  /
  
    SCORE(1) TEXT1      TEXT2      TEXT3
  ---------- ---------- ---------- ----------
           6 testword   word2      word3
           6 word4      testword   word5
           3 test word  word2      word3
           3 word4      test word  word5
  
  4 rows selected.
  
  SCOTT@orcl_11gR2> -- with weighting:
  SCOTT@orcl_11gR2> select score (1), t.* from test_sh4 t
    2  where  contains
    3             (t.text3,
    4              '(testword within text1) * 10 or
    5            (testword within nd1)     *  5 or
    6            (testword within text2) * .5 or
    7            (testword within nd2)     * .1',
    8              1) > 0
    9  order  by score (1) desc
   10  /
  
    SCORE(1) TEXT1      TEXT2      TEXT3
  ---------- ---------- ---------- ----------
          48 testword   word2      word3
          20 test word  word2      word3
           2 word4      testword   word5
           1 word4      test word  word5
  
  4 rows selected.
  

• Layout multi-column and hyperlinks Bug

  Hello

  In a German forum, someone found a bug to have hyperlinks in a multi-column layout. All hyperlinks from the second column do not work. In the meantime, more people (including me) can confirm this bug in v20 and the v21. You must create only executives to do work.

  Please Adobe representatives, this bug by engineers report.

  Thank you

  Yves

  I heard of the control device. This problem will be fixed in the next version (v22), which is scheduled for August 7.