Automating the deployment of vAPP

Similar Questions

• Failed to navigate to the plugin registration page after the deployment of vApp

  Hello, we use Serengeti.8 a bit and today found and want to talk a look at the new package of silly data Extensions.  After I deploy the EGGS, starts the administration server and I can access (ssh/console) very well, but when I hit the web service to save the plugin, I get and error of SSL protocol.

  The URL (examples), I am struck by the documentation are https://ServerName.domain:8080 / plugin    or https://10.20.30.40:8080 / plugin I see in the list of processes that Pier/Java manages port 8080, and when I type the same URL without https, I see an apache/tomcat 404 page?

  Not sure exactly where to go next for troubleshooting plugin registration.

  Hello

  If you want to access the plugin registration page, you must Access the http://: 8080/register-plugin /. There is no SSL on port 8080.
  

  If you need to download the plugin binary package, you must Access the https:///vcplugin/serengeti - plugin.zip.
  

• Line 8: Element not in charge 'VirtualSystemCollection' during the deployment of vApp

  I have two virtual machines Ubuntu 8.04 I created in VMWare Studio using VMWare Studio 1. Can I import into my ESXi 4 server as OVF models without any problem. So I then created a VAPP containing two virtual machines and built this without any error. But when I try to import the given in my ESXi server, I get this error when selecting the source of the ESXi server location:

  ' Line 8: unsupported element.

  ""VirtualSystemCollection"

  Nobody knows what could be causing this or how I could solve it yet?

  Virtual machines are simple systems without any preinstalled applications because at this point, I just test the functionality and ease of use of VMWare Studio.

  Thanks in advance.

  It's the line 8 of the ovf file:

  & lt; / vmw:IpAssignmentSection & gt; & lt; VirtualSystemCollection xmlns ="http://schemas.dmtf.org/ovf/envelope/1" xmlns:ovf ="http://schemas.dmtf.org/ovf/envelope/1" ovf:id = "VSC ovfid" & gt;

  This must be due to the version of the FVO. VMware Studio 1.0 only supports the OVF 0.9 but VMware Studio 2.0 now supports both 0.9 and 1.0 versions. So, my recommendation is, you recreate your WILL and vApp using VMware Studio 2.0 and import in ESXi.

  I need to know how you created VAPP.

• Problems to change my url endpoint data control for Web Service design time vs deploy times. Where is the url of time to deploy the "deployment configuration" stored?

  https://blogs.Oracle.com/ADF/entry/changing_endpoint_url_for_a_web_service_data_control

  Using this link as a reference, I created a data control Web Service, and when I deploy via JDeveloper for different environments I can change my point of endpoint accordingly on this screen:

  

  However when I change my point of termination at the design time, the changes do not appear in the screen "Configuration of the deployment. This would not normally be a problem, but our automated deployment (maven/ant) seems to keep picking up the url "Deployment Configuration" instead of what we change in the DataControl.dcx. So I have a few questions:

  1. Why is there a difference between what we have in the source code and what is shown on this ""Deployment Configuration "screen for manual deployment of JDeveloper? "

  2. where is this "Deployment Configuration" end point url located? I can change it during an automated deployment as I can on a manual deployment?

  3. What is the best practice to change a url endpoint to the Web Service data control with during an automated deployment?

  It turns out that the connections.xml had the url of the endpoint that the profile of the deployment and jdeveloper was referencing at deployment time.

  In order to get our automated generation work, we use a search and replace of Ant utility to change endpoint in this connections.xml before construction/deployment of the application.

• State of the #2 NSX controller node remains on the DEPLOYMENT

  Hi all

  ************************************************

  Let me start by describing my laboratory:

  vSphere 5.1 = > vCloud Director 5.1 = > vApp = > nested ESXi 6.0.u1 = > vcsa (outdoor installation) 6.0.u1 + NSX 6.1.4 Manager + NSX controller

  ************************************************

  I am facing a strange behave of my NSX Manager.

  I have deployed the first node in the cluster of my controller with no problems and when I deployed the second node, the device has successfully deployed but never started. In addition, the status of this new controller is stuck on the "deployment." I started the #2 controller and check is (see the control cluster status) and everything is ok.

  I already tried without any improvement for:

  • Shut down the node, and then restart the Manager only
  • Restart the new node and the Manager,
  • keep the node running, then restart the Manager

  Sounds like a problem of database. Is a person of experience already the same?

  I will try to find a way to get and clear the record in the base during this time, do not hesitate to suggest

  Thanks in advance

  

  

  Finally, I thought about using the API NSX to go further.

  I've performed a GET method to list my controllers and their status through https://NSXManagerIP/api/2.0/vdn/controller.

  I was able to confirm the status of the second node

  

  As the method is not allowed (please, please let me know if I'm wrong) I had to remove the controller to do this, I launched a https://NSXManagerIP/api/2.0/vdn/controller/controller-2?forceRemoval=FalseDELETE method.

  I was then able to re-deploy my controller :-)

  PS: Note that if you delete the last controller, you will have to force the deletion by using the command https://NSXManagerIP/api/2.0/vdn/controller/controller-2?forceRemoval=true.

• Workflow for the deployment TIME of the catalogue.

  Hi team... Am new VCO and I'm not able to find the workflow for the deployment of a paralyzed man in a VDC among the models in the public catalog of vCloud Director. Kindly direct me to the right workflow, method or script if it is available.

  Welcome.

  It's called Instantiate. VAPP model

  Christophe.

• Number of client for the deployment program

  Hello.

  I'm trying to register my company on the deployment program, but struggling to get the customer number.

  Someone who can help me out here?

  42 employees and the plan is that they must get their own iPad that we can manage easily thanks to our it staff.

  Enterprise
  1-866-752-7753

• Photosmart C4795 on fall back on the deployment of Airprint for 2011 schedule?

  Hello:

  I recently bought the printer Photosmart C4795 wireless in September or October 2010. It is not on the deployment schedule of Airprint for 2010 on the PDF on HP support.

  Would you know if The Photosmart C4795 wireless printer will be on a schedule of deployment of Airprint for 2011 or internal parts rely before the deadline of compatibility?

  I want to upgrade this printer to be Airprint compatible.

  Thank you!

  Ziffel

  One of the main requirements for Airprint is the must have ePrint printer.  I do not see the C4795 on ePrint models list, so it will not work with Airprint.

  Another solution is HP iPrint, it allows to print Apple portable devices via a 802.11 wireless connection.

  Here is a link to a document iPrint, it will show you how to get HP iPrint.

  http://support.HP.com/us-en/document/c01616126

• Development parameters do not transfer to the deployment.

  Hi all

  I use TestStand with parallel process model to test 16 DUT. After much head banging I discovered I needed to include TestExec.ini to force deployment to use the parallel model.  What other files I need to include parameters to be transferred to the deployment? These settings are specifically:

  • Reporting disabled
  
  
  • Number of Test Sockets
  
  
  • Other settings that I can't think of right now...

  I must emphasize that this is my first TestStand deployment.

  Thank you!

  After watching a little more into it, it seems that TestStandModelReportIOptions.ini and TestStandModelDatabaseOptions.ini have both been replaced by ResultProcessing.cfg, which should be the only file you need!

• AO drive to 0 before the cancellation of the deployment NIVS Workspace

  Hi all

  NIVS 2011, our Simulink model villages are mapped to output analog.  Any value is lock to the outport cancels the sysdef is locked to the AO.  We are all set to 0 before the cancellation of the deployment of the sysdef.  We cannot stop the model, but it always leads the channel.  We can set the value of the channel, but the model rolls in it even when standing (it makes sense).  Ideally, we would have a combo alarm or procedure, but we cannot replace the outputs of the model.  I saw: http://forums.ni.com/t5/NI-VeriStand/reset-all-outputs-to-initial-values/m-p/2162306#M1980.  We can blame AO when the model is running or not.  We surveyed the AO after it flaws to 0 and cancellation of the deployment of the sysdef, and we did not see this high glitch.  So, it seems to give us the behavior we want.  I would check with the gurus to see if there is a better way to do it, or if there are known warnings at our approach.

  Thank you for your time and your insight,

  Steve K

  Hi Steve,.

  My personal recommendation would be to have a conditional calculated channel mapped to the output rather than using faults, in this scenario, conditional value of the string (and, therefore, the AO) would spend outport of the model and a user channel that stores a judgment by default value AO depending on the State of the model.

  The conditional trigger itself could be a model profile outport or stimulus (set a high when the model starts and down again when stopping value), or the State of the model can be determined using an agency independent survey - based on your post, looks like you can already do this.

  Kind regards

• What are the steps needed to get EPICS server to publish the deployment on RT cRIO

  I've been using LV for many years and has everything with a cRIO 9074 RT I am able to generate and execute/deploy the simple screw on the cRIO, but can not get the EPICS server to publish the PVs on the network.  I have spent hours studying examples and whitepapers, but can not find a good example of a server of EPICS on the cRIO deployment.  (I used successfully EPICS on computer based systems)

  Does anyone have an example step by step related to the deployment of the EPICS on a cRIO (real time)?

  It turns out that the PVs were published.  Just know how to pick them.

• Error found on the deployment of NSV cycle

  I get an error detected in Cycle on the deployment of a NSV library on my cRIO.  This was brought about when I accidentally configured the cRIO to be bound to a Windows NSV library library and also linked the NSV of Windows for the cRIO.  I realized my mistake and removed the binding within the cRIO library but for some reason any "too smart for his own good" logic that the project uses to detect the link cycles still considers that the original linking exists.  The only way to get around that (with the exception of rebuild project) is to remove the library Windows, deploy the cRIO library and readd then deploy the Windows library.  If anyone knows another way please let me know.

  

  Workaround solution!  You must disable the binding on the two libraries and deploy then reactivate the library with the correct link and deploy again.

  I would classify this as a bug since at least one person could not easily understand how to get out of the cycle of the error.

• RunState.Sequence.Main vs RunState.SequenceFile? When you use the deployed software?

  RunState.Sequence.Main vs RunState.SequenceFile?  When you use the deployed software?

  Can someone explain to me why when I use something like->

  RunState.SequenceFile.Data.Seq ["Test Seq"]. Hand ["Test not"]. Result.Status

  the status will never be updated if I am set up for LabVIEW Run - Time Engine (but will work for the development of the system).

  Also why->

  RunState.Sequence.Main ["step Test"]. Result.Status

  Update for LabVIEW Run - Time Engine and development?

  I solved my problem with RunState.Sequence.Main ["step Test"]. Result.Status but I'm still curious why the reverse does not work?  Can someone give me please a validation test?

  Thank you very much!

  RunState.SequenceFile.Data.Seq contains the copy of time change sequences. These copies are not at all when running. At run time, a separate copy is made (and is accessible from RunState.Sequence) and only this copy of runtime is updated. These runtime copies are made for several reasons such as the following:

  (1) to ensure that changes to the sequence the runtime, do not affect the original version of the time edit of the file (you don't want to change the status to be an editing tool in the right sequence file?).

  (2) to support recursion, recursive calls in the same sequence have their own copy of the sequence so that State for a call is not crushed by one recursively calls the same sequence.

  There are probably other reasons as well, but these are probably the biggest.

  -Doug

• error-17500 when you use the version selector and the toolboxinstaller.exe file not found since the deployment of ts3.5

  Whenever I run the version selector to switch between ts4.2 and 3.5, it displays the error message above and gives also advice how to fix for a version of visual studio, I do not have (I am using 2003). As well as this when I start the deployment of TS3.5 engine I get error message with toolboxinstaller.exe system.io.filenotfound. I know that they are then tried to repair/reinstall nothing works, any help would be greatly appreciated thanks

  Hi Elizabeth,.

  The message below is similar to the message that you receive (note that this message relates to Visual Studio 2005, you could relate to Visual Studio 2003):

  

  This is a known issue with Version TestStand selector and was reported to R & D (#171620). The picker Version TestStand assumes that when Visual Studio is installed on the machine, that Visual C++ has also been installed. It tries to write in Visual C++ specific files that do not exist if Visual C++ is not installed.

  This error does not mean that something is not necessarily, it is more a message that the file cannot be written in successfully. You should be able to continue to launch TestStand successfully without problem.

  On the deployment utility, I suppose that the two issues are related, however, it would be much easier to say for certain that the error you receive won't cause problems if you post a screenshot of the error. You can do it.

  Thank you!

• Error during the deployment of my program for RTOS

  Hello

  When I want to deply my program in RTOS, the following error message if poster and doesnot allow the deployment successful, finishing Yes alreay s is not possible for me to work with the system.

  I use a host computer, a system in real time with it s RTOS (Labview real-time 8.6) with compact RIO cards and an FPGA card.

  The error is:

  ´´´´´´´´´´´´´´´´

  Deployment niLvFpgaAdjustHostInterfaceError.vi (12,10 K)
  Deployment of (10,27 K) niLvFpgaErrorClusterFromErrorCode.vi
  Deployment nirviErrorClusterFromErrorCode.vi (6.68 K)
  Deployment of pad Whitespace.vi (4.23 K)
  Error error Code.vi (350,11 K) Cluster deployment
  Deployment nirio_WriteBig.vi (23,59 K)
  Deployment nirio_CleanUpAfterDownload.vi (5.82 K)
  Deployment nirio_Download.vi (13.76 K)
  Deployment nirio_DisableInterrupts.vi (12,35 K)
  Deployment nirio_ReadBig.vi (37,66 K)
  Deployment nirio_IsItOKToDownload.vi (6,64 K)
  Deployment nirio_ConfigureBitstreamVersion.vi (13,58 K)
  Deployment nirio_PrepareForDownload.vi (6,64 K)
  Deployment nirio_EnableInterrupts.vi (13,58 K)
  Deployment nirio_Open.vi (13.91 K)
  Deployment nirio_Reset.vi (12,35 K)
  Deployment nirio_DMAStopAll.vi (12.37 K)
  Deployment nirio_ConfigureRegisterAddresses.vi (6.63 K)
  Deployment nirio_DMAReconfigureDriver.vi (17,41 K)
  Deployment nirio_GetCompilationResults.vi (13,61 K)
  Deployment nirio_Close.vi (11.28 K)
  Deployment of nirviIntfClose_PCI - 7813R.vi (85,91 K)
  Deployment of Volts on Temperature.vi (34,01 K)
  Deploy NI 9211 Convert temperature (calibrated) .vi (7,86 K)
  Deployment nirviFillInErrorInfo.vi (8.53 K)
  Deployment nirviReportUnexpectedCaseInternalErrorHelper.vi (5.51 K)
  Deployment .vi (4.98 k) nirviReportUnexpectedCaseInternalError (String)
  Deployment nirviReportUnexpectedCaseInternalError (U32) .vi (5.20 k)
  Deployment of nirviIntfOpen_PCI - 7813R.vi (90,91 K)
  Deployment deployment 2010_Library.lvlib\\192.168.0.19\2010_Library failed (error:-2147467259, LabVIEW: unspecified error (Hex 0x80004005).).
  Completed with errors of deployment

  ´´´´´´´´´´´´´´´´´´´´´´´´´´´´´´

  I made lot´s efforts to solve it, but no results, I am sure that the problem is not because of my program, I checked some differenet programs and the result is the same, I guess something happened to my computer RT or my OTR.

  Thank you in advanced for your help.

  Hola,

  por lo as he visto, el error tienes esta asociado has several things between las that include the version of LabVIEW, the led driver (OR-RIO) y el engine analysis. Para solucionarlo vamos a hacer back try cosas:

  1 - restore todo el software del cRIO.

  Ve Al para ello MAX > Configuration > remote systems > cRIO-9012 > software. Select software con el boton derecho y pincha sober Add/Remove programs. Desinstala todo el software del cRIO. When is reincie, boring the Operación para instalarlo. At the hora of seleccionar el software than dedicate instalar, marca NOR-RIO (my) x.x.x (ano). NO selecciones option OR-RIO x.x.x (my) (ano) with the help of the Scan Engine OR. Reinicia y vuelve a hacer el deploy para ver el error if ha notice.

  2 - Formatear el driver.

  In primer lugar, el Hay mover DIP Switch led driver safe MODE has the position IT. Ve al MAX, select el cRIO-90xx con el boton derecho y Select format the drive. Once formatted el driver y reiniciado, dale the IP y subred used mascara y reinstal todo el software según lo descrito en el paso anterior (Scan SIN motor mount). A hacer el nuevo prueba deploy desde el proyecto.

  NOTE: The change remember IP del cRIO en el arbol projects of LabVIEW.

  Esta forma're como is solucionan los errores del tipo "deployment completed with errors. Suerte con ello!

  Jesus