Automation using FTR

Similar Questions

• help the guitar hero automated using labview

  Hi, Im working on my final project for a class e and Im making a guitar hero automated using labVIEW and vision builder. I already have all the buttons and the strum bar, but I need help with the whammy bar. My problem is that it should only work on the notes which take more time with a single click, I think I should add some time delay (or something like that) so if the camera sees the note more times the amount of time its will send a signal to the solenoid to continue to press the whammy in intermittent form bar (I think I need a square to wave this) part).

  I'd really appreciate if someone can help me or show me an example implementation of the part.

  Here is a video of a similar project without the whammy bar

  Edit: Im using a NOR-cDAQ 9472 module for output on a digital OR cDAQ 9171 chasis USB

  Thank you

  Javier Morales

  Dear Javier,

  It sounds like a cool project work.

  Why not try wiring of the output of the shared in a shift register variable to retain the previous values and compare the old with the new value using a door and.  You can connect to a wait function in your loop and wire abour 100ms, normal human reaction time, while is the button held for two cycles this triggers your whammy bar.

  I hope this helps.

  Kind regards

• Automator: using a text file to set several items from the finder?

  Hello

  what I would do:

  I have a text file that contains multiple entries for files and folders, each on a separate line. I want to dragndrop this file on an automator action, he should ask me a destination folder and then copy all the files and folders in this folder.

  I have my action, automator, set up like this:

  Elements of the open Finder

  Get the content of the TextEdit Document

  Copy to the Clipboard (I have not found another way to keep my text sort file values and let it not be crushed by the following, but it works)

  Quit the Application (TextEdit)

  Ask the Finder items (this requires a destination folder)

  Set the value of the Variable (Destination)

  Get the contents of the Clipboard

  Copies the items from the Finder (at Destination)

  It all works, but only when there is 1 entry in my text file. As soon as I have 2 lines of text, I get the following error message:

  The action "copy Finder items" has not provided with the required data.

  How can I make this work with multiple entries?

  The problem is that you only pass the only element to the copy action (you have copied text), instead of an element for each line (paragraph) in the text.  The solution is to use the action filter paragraphs to break up along the borders of paragraph text, which will give you a list of items.  In addition, you do not necessarily have to use TextEdit or the Clipboard - If you already have a file somewhere, you can simply use the action to combine text files to read the text.

  With the above modifications, your workflow should look like:

  Ask the Finder items  (ask for a destination folder)

  Set the value of the Variable  (Destination)

  Ask the Finder items  (Download text files) - set the action to ignore the entry

  Combine text files  (read the text files)

  Filter paragraphs  (paragraphs which are not empty return)

  Copy the items to the Finder  (at Destination)

• Automator: use the variable & selected as parameters for shell files

  I rarely use Automator, but it is useful to create services.

  I have a shell script that the tags of the files, and in a service, he travels the files selected in the Finder.

  What I can't get my head is the way to ask the user for the tag to be applied (either as a literal or choose from the list) and then pass this as the file list for the shell as a parameter.

  You're talking about text tags?

  You can use Ask for the text, and then set the Variable, then before run you Script Shell, Get Variable.  If this is the only variable passed, then it will be '$1 '.

  If you click on the [results] in the action before to run the Shell Script, you can see the order of the variables passed:

  

  Note: $1 should be quoted: echo "$1"

• Allowing COnsolidation automated using HS reviews. Con("",vPcon,"nature")

  Hi Experts.

  I'm having a problem with the rule to fill newspapers Consolidation automated for all Elim. entries made during the process of consolidation of HFM.

  
  

  My application is configured to use the Consolidation rules and I joined the standard consolidation rules and they work very well.

  A tutorial Oracle says to use the HS. Con "", vPCon, "text qualifier").

  I added this rule at the end of my article to consolidate and newspapers were occurring in the value of "élimination" Member, but the amounts were not disposal quantities appropriate, that we should see.

  "Call Hs.Con with Nature to follow the elim so that automated Consolidation reviews can be generated.

  Set vDataUnit = HS. OpenDataUnit("")

  HS = vPCon. Node.PCon("")

  vNumItems = vDataUnit.GetNumItems)

  For i = 0 To vNumItems - 1

  Call vDataUnit.GetItem (i, vAccount, ACIP, vCustom1, vCustom2, vCustom3, vCustom4, dData)

  If HS. Account.IsICP (vAccount) then

  Dial the HS. Con ("V #[disposal]", vPCon, "élimination")

  End If

  Next

  End Sub

  So then I tried to incorporate the suggested rule Oracle HS. Con ("", vPCon, "élimination") directly in the consolidation of the main script, but then we don't get all parent level data during consolidation (as it breaks the consolidation before it can finish correctly).

  Should use us a rule something like this to make sure that we are entering the value member elimination during the execution of the loop of Open Data Unit?

  Set vDataUnit = HS. OpenDataUnit("")

  vNumItems = vDataUnit.GetNumItems)

  For i = 0 To vNumItems - 1

  Call vDataUnit.GetItem (i, vAccount, ACIP, vCustom1, vCustom2, vCustom3, vCustom4, dData)

  If HS. Account.IsICP (vAccount) then

  povValue = "[disposal]" or to use a variable as Set HS = vElim. Account.Elimination

  Dial the HS. Con (vElim, vpCon, "élimination")

  End If

  Next

  You have any suggestions on how to run the rule to fill newspapers with member value elimination of each PKI account data?

  Thank you very much in advance.
  Mark Smith

  Here is the data that I get in my reviews:

  Sample report showing Elim journals

  Application: CENXTEST	Scenario: real
  User: cenxadmin@Native directory	Year: 2018
  Date: 28/05/2015

  Period: February

  Time: 11:28:06

  Value: [removal]

  Status filter: Work, submitted, approved, rejected, released

  Type filter: Auto reverse, regular, automatic reversal

  Filter of Type balance: balanced, balanced by entity, asymmetric

  Entity	Label	Description	Account	PKI	Flow	Credit
  TOT_OPS	CENX_CONS_TOT_OPS_Elimination	CENX_CONS. TOT_OPS	1519200	0502	1 280 000
  0540	1 280 000
  NA_OPS_W_CORP	TOT_OPS_NA_OPS_W_CORP_Elimination	TOT_OPS. NA_OPS_W_CORP

  1519200

  0502

  640 000

  0540

  640 000

  NA_OPS

  NA_OPS_W_CORP_NA_OPS_Elimination

  NA_OPS_W_CORP. NA_OPS

  1519200

  0502

  320 000

  0540

  320 000

  WAEL

  NA_OPS_CAKY_Elimination

  NA_OPS. WAEL

  1519200

  0540

  160 000

  0502

  CAKY_0502_Elimination

  1. CAKY.0502

  1519200

  0540

  80 000

  CCAC

  NA_OPS_CASC_Elimination

  NA_OPS. CCAC

  1519200

  0502

  160 000

  0540

  CASC_0540_Elimination

  1. CASC.0540

  1519200

  0502

  80 000

  Total

  2 480 000

  2 480 000

  Here's another rule, that we tried, but it did not work:

  Dim vPCon

  Dim vElim

  Dim vNumItems

  HS = vPCon. Node.PCon("")

  Set vDataUnit = HS. OpenDataUnit("")

  vNumItems = vDataUnit.GetNumItems)

  For i = 0 To vNumItems - 1

  Call vDataUnit.GetItem (i, vAccount, ACIP, vCustom1, vCustom2, vCustom3, vCustom4, vData)

  If HS. Account.IsICP (vAccount) then

  The value of vElim HS =. Account.Elim (vAccount)

  Dial the HS. Con (vElim, vPCon, "élimination")

  End If

  Next

  Hello. Looks like your rule is to consolidate all the data [Total parent] [disposal] and bypassing [percentage]. If you look in the sample applications in the consolidation rules, you will see there are commonly two subroutines. The first, Consolidation, is the standard that takes care of [percentage]. The second, usually called elimination, is called by the first to care for [eliminating]. In this second subroutine, there are two HS. Lines of con. The exact nature (the third field) on these two lines.

  Eric

• Recommend components for the plant of thumbnails that will be automated using NI USB-6009

  I build a treatment for a University project and I'm looking for a few recommendations of components that work well with the NI USB-6009 case. Because of what is a project of the University, my budget is $ 100 and I need the following:

  a float switch or something similar

  a solenoid valve two-way or three-way

  a pump

  a pH sensor

  a temperature sensor

  a camera

  I understand that I may not have a sufficient budget for all these components, but all product recommendations would be appreciated.

  Hello

  I recommend using the following tool to see examples of projects other users worked on in order to determine the appropriate components: http://www.ni.com/examples/

  I hope this helps!

• Automator - using variables in applescript do script

  How can I insert a variable in 'doing the script' in AppleScript? I want repoName be what is the variable.

  the term {parameters}

  Tell application "Terminal".

  activate

  Set currentTab to script ("ssh [email protected];")

  delay of 6

  do script (' cd... /.. ") ("/ var/www ') in currentTab

  delay of 6

  RepoName text set

  make the script currentTab ('sudo mkdir $repoName")

  tell the end

  end of race

  Figured it out:

  the term {parameters}

  Tell application "Terminal".

  activate

  Set currentTab to script ("ssh [email protected];")

  delay 3

  do script (' cd... /.. ") ("/ var/www ') in currentTab

  delay 3

  Define repoName (enter text)

  do script ('sudo mkdir") & repoName in currentTab

  tell the end

  end of race

  The key is the & symbol, which concatenates.

• Can I use automator to change the modified time of a file as its content?

  I use automator to rename a series of images.

  The problem is whenever I change a change of time of amending records file.

  Can I use automator to change the modified time of a file as its content?

  I know that I can use the Terminal to change a date but I have no idea how to do to automate this process

  As you say you know the command to use in the Terminal, and then with Automator, use the Action run the Shell Script after the name change.  The new file name will be passed to the Action run a Shell Script, and from there, you can use touch - r to set the time of the file at the time the name of the new file

• How to set the value of a variable in automator?

  I'm totally new to automator I found a post that I try to reuse

  to Re: copy multiple files from TextEdit in one Word file

  I want to open a series of html files in a folder and convert in a TextEdit rtf file.

  However, I am unable to automator find out how set the value of a variable such that it appears in this post

  I looked at every command in library without a lot of fortune

  Any help?

  Thank you

  Dan

  Its in Utilities.

  In Automator, use the search box:

  

• Sculpture of filter automation problems after put 10.2.1 update?

  Since I've updated, I can't find the filter cutoff or controls resonance in the list of options selectable automation more. I have a track I worked on where I got "Morphpnt 0 filter Cutoff" control the filter cut on the sculpture, but now, even in the same project, that option is not available to select in the list of automation. It seems to me that the option is missing from the list since the update, but maybe I'm wrong, and I'm looking in the wrong place. Any help would be appreciated.

  In virtue of which the Automation subcategory have this setting allows to reside?

  I remember a particular where my question that you're right, I can't locate less 10.2... but I think it's a bug, error or perhaps a change of design for reasons unclear.

  However, there is a clue...

  In the smart controls... When you go to the Non automatable section... (this is why it seems to have been deleted or excluded from the list of normal Automation) it lists filter Cutoff for the Sculpture, but you can select it and then save automation using the assigned smart command...

  

  

• TestStand 2014 freezes when I select a path from the project during an Action LabVIEW using LabVIEW TERM 2014

  In the company that I work, we have a solution that uses the two TestStand 2014 and 2014 LabVIEW.

  We work with the development version of the two, but we are deploying our automation using TestStand and Labview Runtime engine 2014.

  We tried to deploy a new station, but during the analysis of our project, the User Interface for Teststand (version Deploy) froze.

  I tried several things and decided to install a full version of TestStand 2014 and 2014 LabVIEW to try to debug the problem.

  What I've discovered is that when I create a new sequence in TestStand, add a VI Action and try to load the path to the project, the TestStand freezes if I use the adapter Runtime.

  If I go to the LabVIEW development system adapter in TestStand, it works. However, I need to use the Runtime since it's free while the LabVIEW Development is paid.

  We already use our solution in other places, and this is the first time, it never happened. The only post I found online that had something to do with this issue is this.

  If I remove the path of the project and call the VI himself, as "dvu", said in his second post, it works.

  However, it is something not good to do in our automation together, since we have several calls from LabVIEW.

  Any ideas on how to do this only works with 2014 DURATION and 2014 Runtime LabVIEW TestStand?

  Thank you!

  Thanks a lot Stop_Luke_and_Listen, but the guy where the deployment was made called the support NEITHER and they couldn't find the problem, so they formatted the PC.

  Now it works very well, so I won't be able to generate the report. It would have been a great idea.

  Thank you!

  SOLUTION: Format the PC and reinstall.

• Signature without using Code code signing authority of signatory to basic password file

  I'm trying to restrict access to a store of PersistentObject using code signing. I created the public/private key pair and I also have my. KEY file. When I do following step it work very well:

  • Sign your application using your code signing key standard issued by Research In Motion.
  • Sign that these signed .cod files with the application file signatory in the administration of BlackBerry signature tool.

  But I want to design a signature tool automated using ant tasks.  I am unable to find corresponding Ant task to call the file signing tool.

  Anyone know how to get the code signing to work without using the JDE?

  Thanks in advance

  you need a server to use this signature signature. AFAIK, you sign your apps as before, just with your own signature added server.

• Convert .xls in .csv file using pl/sql or any other method (oracle 9i)

  Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64 bit Production

  With partitioning, OLAP and Oracle Data Mining options

  Release 9.2.0.8.0 - Production jserver

  10.1.2.0.2 generator

  ORACLE Server Release 10.1.0.4.2

  Oracle 10.1.2.0.2 procedure generator

  Oracle ORACLE PL/SQL V10.1.0.4.2 - Production

  Oracle 10.1.0.4.0 Production CORE

  Integration Services 10.1.2.0.2 tools Oracle

  Space common tools Oracle 10.1.2.0.2

  Oracle Toolkit 2 for 32-bit Windows, 10.1.2.0.2 platforms

  Resource object 10.1.2.0.2 store

  Oracle Help 10.1.2.0.2

  Oracle Sqlmgr 10.1.2.0.2

  Query Oracle 10.1.2.0.2 - Production Designer

  PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)

  Oracle ZRC 10.1.2.0.2

  Oracle XML Developers Kit 10.1.0.4.2 - Production

  Virtual graphics system Oracle 10.1.2.0.2

  Image of Oracle 10.1.2.0.2

  Widget media Oracle 10.1.2.0.2

  The GUI utility 10.1.2.0.2 tools Oracle

  I had seen a very old post of 2009.

  Convert .xls in .csv file using pl/sql

  I know that it s a long time but just wanted to know if there is a way to convert excel .csv.

  I have a directory say 'F:\purple_top\ '. I'll get the .xls file in this directory. I need to change to .csv and tables load external oracle. Any ideas or advance coding on it since 2009 so far?

  A few other options might be:

  • Java code, which can be used from within Oracle, which makes use of utility libraries (e.g. Aspose.Cells) open source (for example Apache POI) or "save under" CSV, or read the source cells and their output to a CSV file.
  • COM Automation, using available open source (for example, JACOB or j-interop) or commercial libraries, which can automate Excel to open a XLS file and "Save as" a CSV file. In addition, Oracle has a feature of COM Automation (available since version 8 but abandoned after Oracle 11g). I have successfully used this read (non-macro-enabled) Excel files in PL/SQL.
  • Other approaches using Perl or PHP can be found by googling 'convert xls to csv.

  Gerard

• Problem automated creation of the pools (linked clone or full clone)

  Hi all!

  Two or three weeks ago I started to experience a very strange error in my environment. (vCenter and vSphere Horizon are version 6.x)

  At the point where I'm trying to create a pool automated , using of linked clone or a full clone, the following error is displayed as follows:

  «The selected snapshot is hardware version 7.» Only ESX 4.0 hosts or homogenous groups of hosts running ESX 4.0 can be selected. »

  
  

  I know that there is a KB ( ) 1028489) reported this error, but it is applied to view 4.X and I'm running the version 6

  
  

  I first thought it was on an old parent VMs and instant, so I created all parents of virtual machines and snapshot material the most recent help of virtual machine. But the error still there.

  
  

  Is there any type of troubleshooting for this problem?

  
  

  Ideas are very much aprecciated.
  

  
  

  Thank you.

  
  

  Best,

  Eduardo.
  

  
  

  
  

  Solved!

  Permissions. In fact, the role attributed to view user.

  Best.

  Thank you

  Eduardo.

• Using the vCloud on hosted iland Director vCloud API

  Hi all, I'm new to vCloud so please forgive me if I ask a stupid question. I am currently developing a solution of automation using vCloud API (.Net), and I have at my disposal a vCloud hosted on iland.

  I am trying to run the .net SDK samples and I see that I must provide the "vcloud" url to connect. For example, the command to get a list with all current VM is the following:

  ListAllvApps VcloudUrl user@organization password

  The thing is that I don't really know what is this "vcloudurl", I tried to use the value that appears in "URL for the default organization" on the parameters of the Organization (see screenshot), but I got an error in the response (rather than get a xml, I get an element html with text "Page not found" or something similar in the body).

  Can someone help me on this?

  Thank you very much

  Jorge

  

  I don't use iland, so I can't test it for real... but I did a few tests with what I could.

  URL of the API:

  https://dal01.ilandcloud.com/API

  API version: 1.5 (5.1 I tried, but it seems that they are not on this version yet)

  Example command to run with curl (most linux boxes can work and windows with Cygwin)

  curl-i k h ' Accept: application / * + xml; " version = 1.5"test@test:test u x POST https://dal01.ilandcloud.com/api/sessions

  This should connect and give you a token of permission-vcloud-x.  If you know that the RestAPI can connect.

  Hope it gets you going, wish I could do more but I do not have a full account to test with their services.