AutoPlay on startup does not work in SharePod

Similar Questions

• Check for new messages at startup does not work in the first period of 10 minutes after v38 updated. Work at the end of 10 minutes. CAUSE unknown - went away after reinstall

  After the 38.0.1 of 31 thunderbird update does not check for messages at startup, tried on two workstations, mail for a single account on each account, one was pop and other imap. The check box in the accounts-> server settings has no effect. Or not safe mode or the option advanced messages "include this server when getting new messages". "." Activity Manager shows not even he is trying to connect. The question mark function still works well so if I wait 10 minutes he gets messages automatically...

  said rafikiphoto

  I reinstalled the program once more and it works OK but it's already happened and it fails once more.

  The last installation permanently solve this (so far)?

• AutoPlay dialog box does not work; flashes upwards and disappears

  AutoPlay stopped working on my PC. First thing I noticed when I swapped a game disc (FEAR: Extraction Point), who had been in the car for a few weeks, for another (Gears Of War). No AutoPlay dialog box does appear. I opened and closed it again, AFRAID to put in, tried an audio CD. No luck.

  What is interesting, is that if I pay attention, AutoPlay Windows flashes up, but immediately disappears. The same thing happens if I 'force' autoplay via the context menu in Explorer.

  I tried the following:

  (1) obviously checked the auto run settings in the control panel. Reset by default, activated it and left, etc.

  ' (2) ' the core hardware detection ' is running and set to automatic. Checked through "services.msc".

  (3) applied a few registry tweaks for entries "NoDriveAutorun" and "NoTypeAutorun".

  None of the above have made the difference. I am running Windows 7 Home Premium 64.

  Please help! Thanks in advance.

  This same situation has begun to occurring with my x 64 installation Win 7 Ultimate and I tried to fix it for ten days.

  Something changed 14 10 days ago and I can't remember what it was. Too many days had passed for restoration help, because it does not restore earlier I had.

  I tried everthing tried dancingcarb. Even downloaded 'autoplay repair' and ' defaul Programs editor ", ran and still no joy. I searched the web and read a lot of posts, but nothing did. This post is one that describes more precisely what I saw.

  Settings for AutoPlay in Control Panel type of work. PowerDVD will launch when I insert a recorded DVD, Windows Media player launches when I insert a CD recorded and Explorer will launch when I insert a data disc. But, always selecting "ask" does nothing. I don't remember Autorun recently. I see the reading dialog box automatic box flash on the screen. I can click the drive and select autoplay, but the same thing happens - the dialog box flashes and disappears.

  I tried to uninstall CyberLink Suite and Nero. Nothing has changed. I wonder if a recent update of Windows changed how works the AutoPlay.

  I ran a full system virus scan.

  This is a new computer about a month old and I'm bored to choose what I want to do every time.

  It's like something (a manager of some sort maybe) Hung all non-application specific selections. If I had Win 7 secondary machine, I start this topic and then to compare registry settings between the two.

  I have not tried booting in SafeMode (will try tonight), but I don't have much hope.

  It is the last obstacle to overcome (and don't understand why it's happening). I hate the idea of starting fresh and redo what I spent the last month making (which involved about methodically mobile 1.5 TB of data and install apps from my last computer), not even know if it will solve the problem. I would be grateful if someone can point us in the right direction. I'm out of ideas.

  Thank you.

  Later...

  Regarding the "check if auto execution works in safe mode." No, it isn't. Best I can tell, it is not yet available.

  As dancingcrab, sfc found nothing.

  Still stuck

  +*+*+*+*

  I don't know what just happened, but I lost my summary of the steps to solve the problem on my system troubleshooting. I can tell if it helps someone, but for now -.

  MotoHelper Service has proved to be the culprit on my system. Changed the service for a manual start and Autoplay now works as expected.

  I hope this helps.

• Restore to factory using F11 at startup does not work

  Well, that was boring.  I did a clean install of Windows 7 64-bit on my new X100e, and now the possibility to do a restore to factory of the hidden partition disappeared.

  When I did install cleanup (64-bit Win7 Pro 32-bit replacement Win7 Pro), I left the only hidden partition and I left the only Lenovo recovery partition.  I installed the OneKey Recovery software - but it's while I was trying to just stuff - OKR not really for the factory still restore (or apparently not at leasst in this way).  I did * not * install all drivers again (audio, video, bluetooth, etc) but I can't imagine that should make a difference.

  In any case, so just an as a test, as soon as I got the new version of Windows 7 installed, I tested the operation of factory restore... Restart, press ENTER to interrupt him, and then press F11 to restore.  Nothing.  Only, it was sent in a normal boot - back in 64-bit Windows 7.

  Good thing I made the recovery discs and backed up to SWTOOLS.  But I can of course understand how to install a new operating system in the main partition - especially since I left what is hidden and the Lenovo recovery partitions intact - would affect how the BIOS handles the startup and restore function.  The function was working perfectly before this (I've tested this, too.)  Perhaps it is the drivers... perhaps something like device experience drivers change the boot somehow?  Maybe some BIOS setting that changes installation Win 7?  As maybe Win 7 64 brought a change to the boot record changed this feature...

  I paint a white... ideas?

  Thank you!

  (P.S.  Yes, I know it seems strange to want to restore factory after the installation of 64-bit to 32-bit, but I'm really trying to fgiure on how the factory restore has disabled.)

  The recovery disk is here

  http://www-307.IBM.com/PC/support/site.WSS/MIGR-54483.html

  Here you can find a user made an iso bootable with the same executable

  http://Forum.ThinkPads.com/viewtopic.php?t=56398

  But I repeat is unlikely that it will solve your problem.

• Portege 7220CTe he's - USB dock does not work properly

  I have a portege 7220, with Dock he's using windows 98se.
  I have 2 usb ports on the dock, one that I use for mouse, 2nd I use for hard disk USB, cards memory sticks etc. When I start with 2 installed, often they will not work. Installing after startup does not work either. MILADI repairman told me to bring pc + dock in because they think it's a hardware problem. But sometimes, the usb works with 2 installed users. Who can help me? BIOS (ACPI version 1.70, 29/09/00).

  Hi Buk

  Trust me on this path is not easy what's happening with your USB ports.
  Do you have similar problems if you use the USB ports on Portege itself?

  As you know the signal USB is just loop through and there may be a problem with the circuit of the port replicator.

  I really put t think you will be able to solve alone.

  Good luck!

• Tiara startup script does not work when running file associated with

  Hello

  I have a startup script that works correctly with tiara itself, however when I open a file associated with tiara (tdms files) the startup script does not work.  Is it possible to ensure that the script runs without worrying?  Thanks for the help!

  Bala

  Hi Bala,

  Depending on your use case, I suggest you call the next VI, which comes with LabVIEW, after your purchase VI is the creation of the data file.  Just pass the data file path in the upper part of entry and your path to the VBScript file in less than entry.

  "C:\Program Files (x 86) \National Instruments\LabVIEW 2013\vi.lib\ExportToExcel\DIAdem report Assistant Start CSC.vi '.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• CD-ROM drive is missing and AutoPlay does not work

  Original title: CDROM

  I can not find my drive in 'my computer', I tried to install the new drivers, but it does not work. I don't know that this is not a hardware problem cause the disc rotates when I insert a disc, it does not autoplay. Please help someone

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that CD-ROM drive is missing from the information you have provided to us, and that it does not autoplay. I will certainly help you in this matter.

  1. What is the operating system installed on your computer?

  2 have had any changes made to the computer before the show?

  Please follow the steps from the link and check that it works very well.

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060/en-us

  If you face problems more when working with Windows Mail on the Microsoft Community Forum.

• AutoPlay does not work after has been uninstalled nero 10

  I uninstalled nero 10 and Auto for the reader DVD; NT work

  Hello

  1. what operating system is installed on the computer?
  2. do you get an error message?

  Follow the steps mentioned below.

  a. click the Start button, and then click all programs.

  b. Select accessories and then right-click on the command prompt.

  c. click on run as administrator.

  d. at the command prompt, type net start shellhwdetection , and then press ENTER.

  e. restart your computer.

  For more information, see the following articles

  
  Troubleshoot AutoPlay

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  
  Change AutoPlay settings

  http://Windows.Microsoft.com/en-us/Windows7/Change-AutoPlay-settings

  
  AutoPlay: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/AutoPlay-frequently-asked-questions

  Reference: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/autoplay-not-working-for-usb-flash-drive/304f3ddd-13a1-44a9-be5a-1e9f4c74b3a9

  The Autorun feature or the AutoPlay feature does not work when you insert a CD-ROM into the CD drive
  http://support.Microsoft.com/kb/330135
  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

• After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer

  After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.

  Applications, (Norton and McAfee) (including free evaluation versions are notorious for not not upgrade (or uninstalling) itself.) If NIS has been installed for 3 years, you have NIS update at least once and maybe twice (e.g., NIS 2009 > NIS 2010 > NIS 2011).

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) viaControl Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

  10. restart once again & test.

  NB: Installation KB971029 disables AutoRun/autoplay on USB connected but not 'brilliant media' external drives (i.e., CDs & DVDs). See http://blogs.technet.com/b/msrc/archive/2011/02/08/deeper-insight-into-the-security-advisory-967940-update.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• AutoPlay does not work for DVD - RW drive

  Original title: Media Player

  When I go to my computer-drive DVD - RW (D) - properties - auto play prompt me each time to choose an action-apply-OK; It dose does not work when I insert a disk in my computer; WHY? Help, please!

  Hello

  ·         What exactly is the problem? Do you want to say AutoPlay does not work?

  ·         What happens when you try to insert the CD/DVD in the CD/DVD drive?

  ·         You are able to open the CD/DVD directly from the my computer window?

  I suggest you follow the steps mentioned in the articles below.

  The AutoPlay function does not work and the current media does not appear in my computer when you insert a CD or DVD

  http://support.Microsoft.com/kb/817357

  The Autorun feature or the AutoPlay feature does not work when you insert a CD-ROM into the CD drive

  http://support.Microsoft.com/kb/330135

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.

• AutoPlay feature does not work when you insert a CD-ROM into the CD drive

  Original title: computer disc drive

  Download or CD extract of music reading, record music, download CD etc... Before my hard drive had to be replaced, when a disc is inserted into my computer, a window appears, asking what you want to do... Burn music, Rip, copy in folder etc... now when I insert a disk, the window no longer appears, which gives you options and you get to this site... How can I get that back?

  Hey Big-Mack,

  Try the steps of troubleshooting mentioned in the following article and check the result.
  See the enforcement function automatic or AutoPlay feature does not work when you insert a CD-ROM into the CD drive

  If the problem persists, run the Autoplay Repair Wizard and check the result.
  See Autoplay Repair Wizard

  Play functionality; New in Windows Media Player 12 makes it easy to listen to the music, video and photos from your computer to other computers, TVs or stereo on your home network.
  For more information, see play in

  Visit our Microsoft answers feedback Forum and let us know what you think.

• "u3ajwry.exe" does not work on startup. What does that mean?

  I get the message 'u3ajwry.exe' does not work. What does that mean?

  There is no entry listed in the start menu to the top

  Can't see the full command and nothing happens when I double click on the edge of the column rt hand.

  Errm. Is there is no entry in the msconfig Startup tab then there is no complete command to try and see!

  If this only happens at startup, it may be in via a mechanism not covered by msconfig. "Autoruns" should be. You can download Autoruns here

  http://TechNet.Microsoft.com/en-GB/sysinternals/bb963902.aspx

  Once again, to see the full command (equivalent column is called 'Image path' by Autoruns), you may need to widen the column by dragging the right edge of its title, the mouse pointer will change when you can drag to expand

  

• AutoPlay does not work when it is connected to an external hard drive

  My system is installed with Vista. Lately I noticed that whenever I connect an external hard drive/USB or load a DVD. the AutoPlay function does not work. I tried to make changes via the Panel control, but without success. to access the device, I opened MY computer and open the unit. Please help how can I reset the auto run System. Thank you.

  Have you tried the "Reset all default settings" button in the control panel?

  See if it helps:

  Reading auto/AutoRun not working do not or not missing not open in Windows Vista
  http://www.mydigitallife.info/autoplayautorun-not-working-or-missing-not-open-in-Windows-Vista/

  WARNING: There are some parts of the article that involves the registry editting. Serious problems can occur if you modify the registry incorrectly by using the registry editor or by using another method. These problems may require that you reinstall the operating system. Modify the registry at your own risk. If you are not comfortable editting the registry request assistance from someone who knows.

• All of a sudden my AutoPlay does not work. I tried changing the settings but nothing seems to work. Help, please.

  It was just after I downloaded a newer version of itunes.  I tried to do a system restore on it, but it did not help.

  I was wondering... you already tried system restore...
  It restore your system but just don't
  fix AutoPlay?

  Or... She didn't have to restore your system?

  ===

  No guarantee... but if you're comfortable editing
  the registry, the following article may be worth a visit:

  Proceed at your own risk *.

  AutoRun/AutoPlay does not work when a CD/DVD is inserted
  http://vistasupport.mvps.org/autorun_autoplay_don't_work_when_cddvd_is_inserted.htm And... the following links may be worth a visit:

  (982116) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116
  (Windows XP / Windows Vista / Windows 7)

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

• AutoPlay does not work anymore

  for some reason autoplay stopped working, when I put the cd/dvd in the drive I manually go to media player and play drive that way-ive tried all responses on here - I've set it to administrator-gone to settings for automatic execution etc... but nothing works

  also my digital camera has stopped working - a box used to pop up and ask how I wanted to import photos-also went to autoplay settings and it still does not work

  Ive checked the device and the usb drive on another pc and it works fine (I don't have an installation for camera disc, but there is no need of a front, the pc he recognized just when I plugged the cable)

  the usb ports on my pc also work very well

  the fujifilm site is no help either

  These two problems occurred at the same time so I guess that theyre associated

  by the way im not very tech mind-so simple advice would be great!

  anyone has any ideas please?

  If it is a recent issue, it may be interesting to try to do a system restore
  in Safe Mode for some time before he started.

  Windows Vista - system restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Using Windows 7 or Vista System Restore
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Windows Vista - what is Mode safe
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-safe-mode

  Windows Vista - start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Good luck...