AutoScroll artist or the song title, but not both

Similar Questions

• exclamation points next to the song title + can not play the song

  I get these at various times and don't know why. They produce when I click on a song to play or copy it into my ipod. If I close itunes and then restart it, all of them disappear, but the process continues to repeat itself. I want to throw my computer out the window AND ipod sometimes!

  Hello

  I suggest you to check out the Apple site:

  http://support.Apple.com/kb/TS1408?viewlocale=en_US

  If the problem persists, then I suggest you to get help on the Apple support forum site:

  https://discussions.Apple.com/community/iTunes/itunes_for_windows

• How can I extract a series of CDs of music with the same title, but each with its own number of CD?

  I have a set of 5 CDs of music, all with the same title but different disk numbers. Ripping the first is good, but when I try to rip the second I get a message that this title was torn. Each CD shows her number, but not in the title line. I guess the CD numbers aren't playing. How can I solve this problem and have all 5 CD end up in Media Player?

  Hello

  You can change the title of rip for CD1, CD2 and CD3 etc. Later, try to rip from CD & check if the problem occurs.

  
  Reference: rip music from a CD

  Hope the helps of information.

• I can connect to the local network, but not to the internet

  Why in an internet connection, I can connect to the Local network, but not to the Internet.
  I have valid IP address and configuration is good.

  I recommend you read some threads here in the forum about similar issues.
  If this problem occurs using the WiFi network, then check if you can use the connection to the local network.
  Using the WiFi network, you must check if the common WLan parameters are favourable;
  Check if the encryption key is right; turn off filtering by mac address, check the TCP/IP protocol settings if it has been set to automatic, disable the firewall settings, rest you WLan router, check if you connected to the right SSID.

  Good bye

• I sent 2 SMS to the iPhone even from the same location 1 hour out. Why I was charged for the second message, but not the first?

  I sent 2 SMS on the phone even in the same place 1 hour apart. I was charged for the second message, but not the first. Why charge me? I was under the impression that the messages sent between iPhones are free?

  I was under the impression that the messages sent between iPhones are free?

  It's a little more complicated than that.

  If the message is sent as an iMessage (blue) uses the data that could be part of your cellular data allowance or WiFi depending on what you are connected to. If it is sent as SMS (green) it takes however your carrier charges you for SMS.

  For a message to be sent in an iMessage, both parties need to have a device capable of iMessage (e.g., iPhone, iPad, Mac), iMessages allowed to have (settings > Messages > iMessage > on) and be connected to the data (Wifi or cellular).

• My iPhone 4 is dead. I loaded an hour then tried the power reset but not joy.

  My iPhone 4 is dead. I loaded an hour then tried the power reset but not joy.

  I'm going to assume that your iPhone 4 no is not in warranty, otherwise you'd be on the Apple Store, right?  I also assume that you are not interested to pay the service battery $ 79 or $ 199 iPhone 4 warranty exchange for a device that is worth less than $100 (U.S. prices)

  So so let's solve the problems.
  When was the last time it works well?

  An iPhone 4 is old enough, and if it has been inactive for a while, then it is possible to lose load under the level at which it is able to charge the battery.  The battery has a logic board little teeny buried in the packaging of the battery that dictates the charging process.  There is really no energy, the battery doesn't have enough juice to be able to tell itself to charge when the charger is connected.

  If the phone has relatively recently been works well, then start troubleshooting in the charging port.  Is your refill clean?  Try to clean with alcohol to 99% and a q tip.  If that doesn't resolve, then you need more information - there are some ammeters really convenient usb little inexpensive that you can plug into a charger, then the unit and he will tell you exactly how much, if any, current load appliance pulls.  An iPhone 4 with normal charging system should draw on 1 ampere.   If yours is pulling 1 amp and shows still do not display, try to connect to iTunes to see if your device is recognized.  If this is the case, then you need solve a display problem, not a problem of load.

  If your closer 0 amp, then you need to open your phone and troubleshoot the battery and dock connector.    A lot of DIY resources out there for you help with this, just a google search away.

  A trip to an independent repair facility will also help you to go down on the problem.  Pick one that stands out for its work with the great review, great warranty and someone who is willing to look at this iPhone 4 with a no solution = no fee policy.

• How can I activate on labels in the block diagram, but not on the front panel?

  This question may have been asked before, but searching the Forum did not.

  In LabVIEW 2010, I have 16 indicators of chain on the front panel. I can't have the label for each Visible on the front panel, so I turned it off. But in the block diagram, I need distinguqish one of the other, so I need to make the label (name) visible.

  In the block diagram, if I select indicators Sting all together and go to properties and make the label visible, it makes visible labels on the front but not visible in the block diagram. What good is that?

  How the help of labels (name) of the indicators String visible in the block diagram, but not visible on the front?

  dbaechtel wrote:

  This question may have been asked before, but searching the Forum did not.

  Don't remember already asked this question and get help in this thread?

  Have you tried the things I said in that thread?  How did they not work?

  Right-click on the terminal of BD and make visible > labels.

  It probably will be the FP control show its label as well.  Then go to the FP control, right-click and go to Visible > labels and uncheck the box.

  The terminal of the comics will have a label, and control of the FP will not.

• How to remove a domain controller that was removed from the Internet works but not demoted

  How to remove a domain controller that has been remove from the Internet works but not demoted

  got two domain controllers and been deleted but not retrograde

  can help pls

  Hello

  Your Windows is better suited for the directory on TechNet Services. You can follow the link to ask your question: http://social.technet.microsoft.com/Forums/en-us/winserverDS/threads

  I hope this helps.

• CD badly placed: is there anyway to restore games on the computer without the CD, we have the Product Code but not the cd, we have misplaced it?

  There is in any case for the games on the computer without the CD of restoration, we have the Product Code but not the cd, we have misplaced it?

  There is in any case for the games on the computer without the CD of restoration, we have the Product Code but not the cd, we have misplaced it?

  borrow the CD, install the game and put in your code. If you don't know anyone with a CD, you will need to buy the game again. teengeek.freehostingcloud.com

• The text is visible on the computer screen, but NOT print

  The text is visible on the computer screen, but NOT print

  When I print the document (the header and the footer together can print).

  My printer is Lexmark X 5470.

  Please tell me how to solve this problem.

  Thank you

  Longpo

  Hi Longpo,

  1. what happens when you try to print?

  2. you receive an error message/code?

  Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer. Refer to the help article and check if that helps.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-printer-problems

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Laptop detects the neighbouring network but not my home network?

  My problem is the following...

  My Hp Pavilion dv4 1225dx Vista SP1 computer laptop works very well on our router WRT160, computer laptop Dell Inspiron 8600 XP SP2 from husbands can detect the neighbouring network but not ours. Any suggestions, I searched the forums for answers with no luck.  Thanks in advance!

  Change the channel and SSID or.

• The song information is not transmitted via bluetooth

  Hi forum,

  one of you may be new information about my problem mentioned above. Listen to music in my car via BT the song information are not displayed! I tried an another music app namely NexMusic the same problem.

  On my way to work, I've tested my 'old' GV + with different ROMA (all based on KK 4.4.4) and music Apps and all gave the right information. So there must be something wrong with the implementation of BT... In the XDA forum, there is also a user reported the same problem. (link)

  I hope that SONY will have a deeper look into the implementation of BT

  Your

  Rhonin86

  The problem seems to be fixed with the new version of the firmware

  23.0.1.A.5.77

  This thread could be closed in my opinion.

• diving USB hard drive appears on the Control Panel, but not on MY computer

  Drive hard USB part on the Contrlol Panel but not on my computer.

  Hi Frank,.

  Thanks for posting your query in Microsoft Community.

  If I understand you correctly, the external USB hard drive (HDD) appears in the control panel but does not seem to be detected in my computer screen. I will certainly help you to question, however, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  (a) what is the brand and model number. the USB HDD?

  (b) has detected before HARD drive in my computer screen? If so, did you do changes on the computer before this problem?

  (c) that you get an unrecognized USB device notification error message?

  The unit is probably go up at the same point one of the partitions and thus becoming "invisible". In

  in order to further diagnose the issue, I would suggest trying the following methods and check if the problem persists.

  Method 1:

  Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows

  
  

  Also, run the next fixit to solve common problems with USB devices.

  Diagnose and automatically fix the Windows USB problems

  If the problem persists, try the following method.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.

  Plug in the removable USB device and perform a test to ensure that the problem is solved

  Also, refer to:

  Updated a hardware driver that is not working properly

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• I want to get only year sysdate with my name of the defined column. but not able to get it.

  I want to get only year sysdate with my name of the defined column. but not able to get it.

  SQL > select to_char (sysdate, 'yyyy') as 'mahesh tyagi' from dual;

  Mahé

  ----

  2015

  SQL > select to_char (sysdate, 'yy') as 'Manu' from dual;

  my

  --

  15

  So I couldn't do 'Manu' or "mahesh tyagi" as the column name.

  The column name is "mahesh tyagi" is simply displayed it shortened to sqlplus due to the known values in the column length.

  create table year_test select to_char (sysdate, 'yyyy') "mahesh tyagi" double;

  year_test / / DESC

  You can change the way sqlplus displays the header of column with something like

  column "mahesh tyagi" format a15

• I have the Prime Minister but not encoder and im trying to export videois to how put it on dvd

  I have the Prime Minister but not encoder and im trying to export videois to how put it on dvd

  You must follow the instructions to download/install Encore DVD creating program, as long as the content of the library and put in place so that when you open it, you have all the stuff to work.

  Article download/install Adobe Encore:

  https://helpx.Adobe.com/Encore/KB/Encore-CS6-installed-cc.html

  http://helpx.Adobe.com/Encore/using/download-library-content.html

  Neil