Autostart A7R II
Hello
Bought my II A7R today and returned home after an hour. When I tried to fix my camera lens on automatically. "means that the seller forgot to turn off after the demonstration. Are there chances of damage even if everything seems to work perfectly? I think that the camera should automatically go powersaving mode when the lens comes off.
Please give me your opinion, even though I know what is clearly written in the manual about changing the lens.
Thank you!
Hi provat,.
Welcome to the community of Sony!
There not bad it only to the camera, even though the seller forgot to turn it off. You are right that the camera goes into power saving mode to save battery when it is not in use. It's like an awakening of the sleepmode computer and unless you stop, it is not completely off.
For further assistance about your concern, please contact the representative offices of offices/Sony Sony nearest to your place of residence in the Asia-Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to the proximity, they are in a better position to respond to your questions or concerns.
If my post answered your question, please mark it as "accept as a Solution.
Best regards
Zander
Tags: Sony Products
Similar Questions
-
Video limitation of 30 minutes Sony A7R II
UPDATE: thanks to the application of the OpenMemories, the 30 minute limit is no longer a problem on Sony A7 product line.
I bought a camera Sony A7R II. Now, I know that in Europe, the camera has a limitation of registration of 30 minutes. However, I bought my camera in the USA (it's the b) revision and he still has the limit of 30 minutes. Why? Is this a mistake? How can I remove the limit?
Thank you.
II A7R impossible to record a video of 30 minutes or more. What you get to do is with the EU.
-
How warns we Touch & launch the autostart?
Hello world
How we keep Touch of Toshiba and launch (PadExe.exe) to launch at system startup?
I hope that there is another way than editing autostart configuration (MSCONFIG) system.
Thank you
Thomas JedenfeltHi Thomas
The fastest way is to make a shortcut in start all startup programs. There is also another way. You create a new entry in the Microsoft Registry editor, but it's more complicated.
Usually, if you install the utility & t, it starts automatically when the system starts.
-
How to disable Autostart music when the headset is connected and smartconnect?
Hello
After rooting my Z3C and upgraded to fw.5.77, I have disabled some packages app via the Asian Development Bank, as the package "SmartConnect" (com.sonyericsson.extras.liveware). But I still have this annoying music autostart when I connect my headphones.
If someone could tell me how to turn off once and for all this (music?) on the road via ADB or freeze it through titanium backup?
Thank you!!Thanks for your reply Uliwooly!
I fact, but autolaunch suite...
I finally found that also was an option in my Walkman (PowerAmp) I had to disable
Thanks again for your help!
-
Currently, using windows vista Home premium. When I open the Software Explorer in windows defender and look at the start of the programmes, the Narrator is not listed. When the Narrator is on, and I watch the current programs, sometimes it is not even in this case, but when it is finally shown, he says 'no' to autostart. Despite all this, Narrator starts again automatically on 30secs after that I turned on my computer.
Start > Control Panel > easy access to the Center > use the computer without a display and make sure that the box is not checked for Narrator begin.
If it of not here then navigate around this area to configure this setting! Wingstmontana M.C.D.S.T.
-
A7r / A7 file name change and bottom of shutter
A7r / A7 file name change and bottom of shutter
A simple feature to add to a new FW must have the ability to change the START of the file name.
If you have two new A7r... both have simular filenames and will start conflicts.
What you should be able to do... it's name... say A7r_00001 HDR and HDR-A7r2_00001
WHERE in the EXIF is the actual NUMBER of trigger to shutter (unchanging)?
It's like the odometer of camera
Excellent Suggestion!
-
NFC connect A7r Sony Z, keep the DIRECT connection
NFC connect A7r to Sony Z,
Connecting the A7r via WPS to my Access Point is easy (PlayMemories APPS updates) and Sony Z AP...
BUT the connection the A7r NFC and Sony Z looks "Clunky" (too many button pushes. and he DOES NOT.)
I want to do is KEEP the connection beteen the A7r and Sony Z... Then
When I shoot, choose which photos to the smartphone (pressing the Fn button in review)... It comes automatically if POSTER on the Smartphone in VGA size ONLY, FULL screen.
* It is so someone with my phone can simply DISPLAY the photos, (FULL SCREEN), only one of the I want to see... As I draw.
I would also like the Sony Z to automatically send a copy of it on my site PlayMemories. VGA JPG only.
All new photos taken off the coast of the Z and downloaded off the A7r shots.
Thanks for the help
Unfortunately you can not do with NFC. The way this works is as a "bundle" of data straight from point A to point B. There is no way to keep it continues as a bluetooth connection.
A work around would be to install the PlayMemories Online application and then connect your camera into wifi... take a photo, do autosync to the cloud, and then have your phone autosync in the cloud so you get a copy.
Because I don't have a sony Z, I have to ask, can you put your phone in mode 'hotspot '?
-
Autostart - foreground application
Hi all
I use RIM-MIDlet-flags-1:1 for autostart my request but I want it shows a screen at startup - I'm pushing the screen and asking the foreground but although the application automatically starts the screen don't be pushed to the forefront - can I do something to achieve?
Regads
Alex
did you check the boot process? the boot process is already over?
see this example:
find this comment:
Check if the BlackBerry has completed its startup process.
Once the boot process is completed,
Push your screen using pushGlobalScreen().
hope that helps.
-
Flag to set Autostart on request submit to the App World vendor Portal
Hi all
I've been wondering. How the device know if my application will be run automatically at startup (when the device starts up) or not, if my application is installed by the user from the App World?
I thought that the autostart flag is stored in the Blackberry App descriptor XML file then reflected to the .jad file once I've compiled my app.
Presentation on the App World vendor Portal requires only the .cod files, not the descriptor xml file or a .jad file.
The autostart flag is also stored in the .cod file?
Yes
-
BlackBerry 10 Autostart/keep apps running
Hi all
There are a few apps (for example, reminder, calendar, LinkedIn and so on) that I want to run continuously. If, for some reason, they are closed, they need to be restarted. I would also like their Autostart each time that I reboot my passport.
The reason is that I use the information in the active frame and I don't want to keep away from these applications whenever they are, for some reason, have been closed.
Is this possible with BB OS or some app?
Edit: I just did a reboot of my passport and all managers active where even on my home screen, so that part seems to work. However, they are just frameworks without content. I have to actually start the application and reduce it until it's content assets. Is it possible to have managers are updated just after reboot?
Thank you
Peter
Sorry, there is no setting for it. You must manually start the apps.
-
Turning point autostart/disable by program?
Hello.
My request is autostart-ed (fixed by the JDE).
I want to allow the user to change the behavior of autostart (i.e. allow him to activate the start feature automatic power switch)
Can be done programmatically (for example using a registry, or in the same way entry value)?
(I know I can use a second method of entry point - I was wondering if there is a way to do it using simpler, because the second approach entrypoint is a fake autostart switch since the app will be started automatically when even :-))
Thank you
There is no way to stop an application to be started automatically. However, your application could determine if it needs to run its start-up operations or not. You can store a persistent value that the application check at startup. If true, it performs its start-up operations, if set to false, he couldn't do anything and go out.
-
AutoStart w/o JDE (Eclipse)
I use the plugin Eclipse and all the docs seem to point to examples of JDE autostart configuration.
Can you tell me what the JDE is hilarious on the autostart options so I can do the Eclipse?
Thank you
I havn't widely used eclipse, but you can find the autorun option in the ownership of the project.
-
A7r / A7 Menu option to kill the AF on shutter half? the Nikon there = Activation AF = AF-ON only
Essentially to get college activation on the EYL touches ONLY... with AF ON = AEL and College.
BUT want to control AF-ON be ONLY Activation AF.
and does not have the shutter half 'again' trigger AF.
This helps when using College and AF-On button EYL.
You can College... OR... Focus and re - composing... both with this set up.
As many do on Nikon
Hello
I did exactly that.
There is a menu option to explicitly disable AF with the press of the shutter. (I think it is called "AF with shutter"). After that, simply customize a command AF-ON button.
Sorry can not verify the exact menu item that I don't have my camera at hand today, but it is confirmed that it was possible. This is one of the first things I did - I can't wait autofocus with half press of the shutter too
-
How can I stop audio autostart in website designed by Dreamweaver CC 2015?
I have three audio files on a single page that auto start at the same time on the opening page even if the setting is autostart = false. How can I stop audio autostart?
Use the HTML5 tag
-
Can you use Pocket wizards to trigger the HVLF60M Sony flash when it is out of the unit with the A7R? How about studio flashes (Alien Bees)? I just sold my Canon gear and moved to Sony, but I need advice on how to trigger wireless flashes. Thanks for any help you can provide.
Larry
LarryMarshall, Any Trigger of manual Radio should work. Assistants of pocket or RadioPoppers.
But there are a few problems with the 60 m.
(1) it doesn't have a PC or a 1/8 port to connect directly to a Rec Radio of any brand.
(2) you WILL NEED to buy or use a hot shoe with a PORT adapter... 1/8 according to the sync cable or PC you may already own.
(3) you WILL NEED to 'Check' to 'ensure' that trigger the 60 m SHAFT is aligned with the center of contact your hotshoe adapter hot with a PORT... because some adapters won't online upward with the 60 m Flash... who fooled you into believing that it does not work. When, in fact, it's just the PIN which is not aligning with ALL the hot shoe adapters.
It will work... you just have to be careful... and know of the gatcha.
The 60 m PUT claw is not fully compatible with all... hot shoe adapters and there that to do with how PUT 60 m flash foot aligns the trigger ROD.
I triggered the 60 m in flash with RadioPoppers... in the manual... so, I know it works.
It is, manual release of the waste of the 60 m flash TTL/HSS abilitys. What is needed is for SONY to develop and deliver a Radio trigger Solution. Which would be TTL/HSS and you allow to 'Control' the Flash too... from the camera.
It is the power of a Flash of modern Radio System.
Manual triggers are old school.
p.s. the A7r/A7 can easily trigger flashes of Studio with Pocket Wizzards or RadioPoppers... or probably triggers of manual. Just be careful if the brand you choose is reliable.
Pocket wizzards and RadioPoppers were the choice of PRO for years. Because they are reliable.
Maybe you are looking for
-
Untrusted connection for all sites
I'm getting "this connection is Untrusted" for each external site/link outside my msn home page. I copied the text of the troubleshooting of a word doc page, but I can't send it because I can't have my office e-mail! What I'm doing!
-
How can you save to a USB album or photo book collection that you created in Aperture?
After much work, the creation of an open book, it does more for books. How to use the collection of photos that I have in this 'book' to create one outside of the opening. Can it be saved on USB or used in "photo"?
-
4630 e-all-in-one printer problem
I hung, installed, connected wireless. Printer shows in the print devices, computer communicate with the printer, everything seems in order until I go to print a document, image, whatever it is. Nothing happens. Tried to uninstall and also hooked to
-
Can someone give an example of how to configure the subnet mask associated with the network and host of an IP address part?
-
Installation of windows 2012 R2 on Poweredge R900 with Raid
Hello I have installed Windorws on my Poweredge R900 2012 R2 there controller raid Perc 6 / I with 5 SAS 300 GB HARD drive, but I don't know on what level of raid, the operating system installed. When I check the drive C: Manager shows 790 GB but as