NFC connect A7r Sony Z, keep the DIRECT connection

Similar Questions

• When you print maps with directions from Google Maps, I can print only part of the directions.

  When I select print in Google maps and printing, the first page is the card belongs to the second page of directions and the third page is empty. I tried in Safari and it does not happen here - the map and directions of how printing which should. This began to happen in Firefox about two weeks ago. I tried to adjust the print settings in Firefox and I have also reset the print settings in topic: config. So far, nothing has worked. I use a HP OfficeJet Pro 8600 and I have not had similar problems in the past.

  Thank you!

  Unfortunately, Google has changed the layout of the page. He added a style rule to the list of instructions that 47 of Firefox are not pages, or in other words, Firefox keeps the direction together as a block list so that you can print as many this block gives on one page. The only way to work around this problem now is to 'hack' the page to override to this rule. If all goes well it will be fixed in a next version of Firefox.

  To hack the page, you will encounter a small script in the Web Console. If you find that you need to do it often, you could create a bookmarklet (a script attached to a bookmark) so it is a one-click operation.

  Non-reusable method

  (A) select this script all over and do a right click > copy:

  document.querySelector('div.widget-pane-section-listbox.widget-pane-section-listbox-root').style.display="block";

  Update:

  document.querySelector('div.section-listbox.section-listbox-root').style.display="block";

  (B) in the tab with the instructions to print page, open the Web Console of Firefox in the lower part of the tab by using one of the following methods:

  • CTRL + SHIFT + k
  • button '3-bar' menu > developer > Web Console
  • (menu bar) Tools > Web Developer > Web Console

  (C) click next to the circumflex accent (>) at the bottom of the Web Console and paste the script (Ctrl + v or right click > paste) and press ENTER to run it.

  (D) close the web console, using the little 'x' on the right end of the bar ad detective, Console, etc., or the hotkey Ctrl + Shift + i could do.

  If you go to preview before printing, you should now see the list over several pages normally. Success?

  Create a Bookmarklet

  A bookmarklet is a small script that you can save on your Favorites or bookmarks Menu, bar in a convenient place. Here's how to create that:

  (1) select the entire script, and then right-click > copy:

  javascript:void(document.querySelector('div.section-listbox.section-listbox-root').style.display="block");

  (2) a comfortable place on your bookmarks bar or Bookmarks Menu with the right mouse button and choose new bookmark

  (3) click the empty box next to location, and then paste the script

  (4) to assign a relevant name like GooMapPrint

  (5) click on the add a bookmark button

  To test, after loading the view 'print' instructions, click on the button. When you call in print preview mode, the steps should be paginated normally.

  (Some sites use a security policy content to prohibit external scripts to be applied. On these sites, bookmarklets don't work - but at least so far, Google does not only.)

• hp7410 does not keep the wireless connection

  hp7410 all-in-one does not keep the wireless connection. It requires to install a new driwer. so far, I have at least 16 versions of the driver. neither maintains the status of line long enough fo more than a few hours.

  Please provide the following information if anyone can help including:

  The printer model - done

  Detailed problem description-

  Operating system on the computer (including the revision of the service pack)-

  Method - USB, LAN, Wireless cable connection? -

  Brand and model of router and modem? -

  Error messages - on the screen of the printer or computer, no matter what flashing light patterns.

  If wireless, status of the blue wireless light on the printer, active, disabled or flashing? -

• How can I keep the connection

  Hello.

  I have the following situation.

  I'm developing an application using a Web server to authenticate users, when a user is authenticated to create a session that I use to conduct several operations.

  Problem:

  When the user using the application by time, the connection and the session are closed, if the user performs an operation has failed because the session was destroyed and must authenticate again.

  How can I keep the connection and open session

  Hi chicoxml,

  I guess it would be similar to online sites that have the same concept of a session.  As I understand it, is that you essentially need either make the longer session time-out, not all the session timeout or use a different way to authenticate your user.

• How do you keep the vlan1 without connecting any device?

  Hello

  We have about 500 routers (Cisco 871) connected to the VPN and the main office.

  My question is, how can I keep the vlan 1 so I might be able to access the router via the VPN, even if there is nothing to plug the router except a DSL modem into the WAN port.

  Thanks for your help and your time!

  Guillaume

  Use the command 'no autostate' on vlan1.

• Could not publish the package of transfer - unknown error (failed the nfc connection)

  Hello

  I finally installed see almost all packages, only the transfer option is left.

  I have configured the server, installed a certificate, and now I want to publish the main image in the repository of transfer for the linked clone desktops.

  The beginning of the publishing process, it initializes, progress to 0% and he breaks up with an error message "could not publish the package to transfer."

  Everything is setuped very well, the repository is shared correctly, inside the folder "Processing" a new folder with the ID of the publication process is created, inside this folder is created a new folder named "work", but there is nothing inside.

  OK, I looked in the file transfer server debug log:

  
  

  2011-04-26 13:54:50, 776 < Thread-6 > [RepoMessageHelper] DEBUG message filter received: Type = RepoLifeCycle, RepoOperationName = COURSE, GUID = 6f84bcab-8f85-47f0-8fd7-8ced7dd9e90a
  2011-04-26 13:54:54, 011 DEBUG < MessageFrameWorkDispatch > [ws_mvdi] unable to connect to the server esx1.atb - potsdam.de:902: unknown error 10060 (0x274c)
  2011-04-26 13:54:54, 011 DEBUG < MessageFrameWorkDispatch > [ws_mvdi] CnxAuthdConnect: returning false because CnxAuthdConnectTCP has failed
  2011-04-26 13:54:54, 011 DEBUG < MessageFrameWorkDispatch > [ws_mvdi] CnxConnectAuthd: returning false because CnxAuthdConnect has failed
  2011-04-26 13:54:54, 011 DEBUG < MessageFrameWorkDispatch > [ws_mvdi] Cnx_Connect: returning false because CnxConnectAuthd has failed
  2011-04-26 13:54:54, 011 DEBUG < MessageFrameWorkDispatch > [ws_mvdi] Cnx_Connect: error message: unable to connect to server esx1.atb - potsdam.de:902
  2011-04-26 13:54:54, 011 DEBUG < MessageFrameWorkDispatch > [ws_mvdi] TicketNFCOperations::TicketNFCOperations: could not establish NFC connection: unable to connect to server esx1.atb - potsdam.de:902.
  2011-04-26 13:54:54, 011 DEBUG < MessageFrameWorkDispatch > [ws_mvdi] MVDIServer_CreateTransferFilesForPublish: error opening of session of the NFC.
  2011-04-26 13:54:54, 011 DEBUG < MessageFrameWorkDispatch > [ws_mvdi] MVDIServer_CreateTransferFilesForPublish: completed.
  2011-04-26 13:54:54, ERROR < MessageFrameWorkDispatch > 011 [ws_mvdi] failed to make the NFC connection to host ' esx1.atb - potsdam.de' while trying to generate files for transfer to desktop PC "serverDn.
  2011-04-26 13:54:54, ERROR 011 < PublishWorker-6f84bcab-8f85-47f0-8fd7-8ced7dd9e90a > [PublishWorker] package transfer error editing: 6f84bcab-8f85-47f0-8fd7-8ced7dd9e90a com.vmware.vdi.transfer.imagerepository.PublishWorker.run(SourceFile:123)
  com.vmware.vdi.transfer.commoncontrol.TransferServerException: Mvdi error occurred during queue: mvdi, Tip: createTransferFilesForPublish. Mvdi error code: 1
  at com.vmware.vdi.transfer.commoncontrol.TransferServerException.fromFrameworkError(SourceFile:68)
  at com.vmware.vdi.transfer.imagerepository.DiskBasedPublishWorker.a(SourceFile:402)
  at com.vmware.vdi.transfer.imagerepository.PublishWorker.run(SourceFile:85)
  at java.lang.Thread.run(Thread.java:619)
  2011-04-26 13:55, 776 < Thread-8 > [RepoMessageHelper] DEBUG message filter received: Type = RepoLifeCycle, RepoOperationName = COURSE, GUID = 6f84bcab-8f85-47f0-8fd7-8ced7dd9e90a
  2011-04-26 13:55:12, 261 DEBUG < MessageFrameWorkDispatch > [ws_vmx] Rpci: send request = 'machine.id.get'
  2011-04-26 13:55:12, 261 DEBUG < MessageFrameWorkDispatch > [ws_vmx] Rpci: Envoy request = 'machine.id.get', reply ='vdi.broker.useSvi = 0;

  I searched on Google, the VMware KBs, this forum, I have no solutions for this problem.

  You have the forwarding server in the same ESX/Cluster as desktop computers to be transffered?

  Also check if the forwarding server can contact esx on port 902

  ----------------

  > [ws_mvdi] unable to connect to the server esx1.atb - potsdam.de:902: unknown error 10060 (0x274c)
  2011-04-26 13:54:54, 011 DEBUG [ws_mvdi] CnxAuthdConnect: returning false because CnxAuthdConnectTCP has failed
  2011-04-26 13:54:54, 011 DEBUG [ws_mvdi] CnxConnectAuthd: returning false because CnxAuthdConnect failed
  2011-04-26 13:54:54, 011 DEBUG [ws_mvdi] Cnx_Connect: returning false because CnxConnectAuthd has failed
  2011-04-26 13:54:54, DEBUG 011 [ws_mvdi] Cnx_Connect: error message: unable to connect to server esx1.atb - potsdam.de:902
  2011-04-26 13:54:54, 011 DEBUG [ws_mvdi] TicketNFCOperations::TicketNFCOperations: could not establish NFC connection: unable to connect to server esx1.atb - potsdam.de:902.
  2011-04-26 13:54:54, 011 DEBUG [ws_mvdi] MVDIServer_CreateTransferFilesForPublish: error opening of session of the NFC.
  2011-04-26 13:54:54, 011 DEBUG [ws_mvdi] MVDIServer_CreateTransferFilesForPublish: completed.
  2011-04-26 13:54:54, ERROR 011 [ws_mvdi] failed to make the NFC connection to host ' esx1.atb - potsdam.de' while trying to generate files for transfer to desktop PC "serverDn.

  ----------------------

  -noble

• Keep the angle of a line of direction as you drag a direction point

  Hello

  I have a way with an inflection point. The two branch points form a line of direction with any non-45-degree-angle - 11.8 degrees.

  I want to drag a direction point while keeping the angle of 11.8 degrees exactly.

  Is there a key combination for this (Mac OS)?

  Thanks in advance.

  I asked for this function for 20 years. Short answer: you can't extend a line. Nifty chart said FINALLY Adobe enough: Let's get some real tools in Illustrator. Their Vectorscribe plugin has an extension function that may extend to any path all right, a spiral or Bezier.

• RTMPS connection delayed due to the direct connection attempt

  Hello world

  I have a big problem with the way the RTMPS connections are initiated in flash player.

  One of my customer network infrastructure does not allow direct connections to my server via port 443, but allows connections proxified (using the CONNECT method).

  The problem is that flash player expects the direct connection attempt to fail before trying the proxified... connection and on this direct infrastructure network connection timeout is 20 s (I can't change that).

  Users must wait for this time to connect to the server...

  Is there a way to tell the flash player do not attempt direct connection, or do not wait for this connection Timeout?

  Perhaps a directive in the automatic proxy configuration (.pac) file?

  I already tried every NetConnection proxyType values of parameter without success.

  Any help would be appreciated!

  You mentioned the 'CONNECT' method Have you tried "CONNECTOnly" that requires to initially use the default CONNECTION method and it is not always obey?

  Documentation on NetConnection.proxyType:

  Set the proxyType property before calling the NetConnection.connect() method.

  ...

  If the property is set to "CONNECTOnly", the player first attempts to use the CONNECT method. If this fails, there is no relief.

• How to keep the State page apex value after connection page

  Does anyone know to keep the State in a page of the apex, when I go to another page and come back? He keeps all the values entered into the fields, it seems that the gaps?
  
  I have 5 regions and each region have elements: text fields, selectors of dates, popup lov, field numbers, text box and view point only. When I go to the next page with redirect and return I see popup lovs values and values of one or two display items only. The values of the other text fields, dates selectors and the display just empty.
  
  Thank you everyone can help. Thank you.
  
  Kind regards
  Dragan

  Hello

  This element only display recording session state?
  Checks the attributes of the element.

  Kind regards
  Jari

  -----
  My Blog: http://dbswh.webhop.net/dbswh/f?p=BLOG:HOME:0
  Twitter: http://www.twitter.com/jariolai

• Keep the figure described directly?

  Sometimes, when I want to run text partly within an image, I use the tool pen to add points and move the points with a tool (forgot the name). When I do this, I want to keep the outline of the horizontal/vertical diagram. But how I try, most of the time the points are not aligned, and I find myself with a bit biased described. Try to get their code on the right does not at all. Even when they look at rights, as soon as I release the mouse, they change a little and I get no straight edges.

  Is there a way I can say Id to keep the outline of a figure of strict horizontal/vertical lines?

  Peter is right, they do not need to be exact.

  However, if you want to make your lines exactly horizontal or vertical and are having problems, try using the axis numbers X and Y that are at the top of your screen in the control bar. For example if you want to align two points for a perfectly vertical line, select point A (top right) with your white arrow. Look at the measure included in the X axis box on the control bar. Let's say it's to 1.25 inches. Now click on point B (lower right corner) with your white arrow. Look at the measure included in the X axis box on the control bar. If she says 1.25 inches, then your line is perfectly straight. If it shows a different number, so go ahead and type, "1.25 in ' and press 'enter' on your keyboard. Set your point and you now have a perfectly straight vertical line. (For horizontal lines, you will use the Y axis). It's certainly the longest way around, but if you're having trouble to get something exactly right, you can do it by the numbers.

• Keep the host resource pools after leaving a cluster

  I thought is was impossible to keep existing or cluster transplant pools of resources on the host which prefabricated a cluster.

  However, vSphere resources management Guide of reading I found an interesting note:

  Make sure that you remove the cluster host by placing first in maintenance mode. If you
  instead disconnect the host before you delete the cluster, the host keeps the pool resource that
  reflects the hierarchy of the cluster.
  

  It looked like something, so I tried it but no luck, the host had no pool after removed offline.

  Now I'm confused of what this phrase actually means.

  What do you see when you connect with vSphere client directly?

  Usually, I see ONLY the list of the running virtual machine resources... not all resource pool.

  Without virtual machines so I think that all the resource pools are removed.

  Try to disconnect with some VM running (also false VMs).

  André

• I want to open a new tab, but keep the cursor in the adressbar. Right not every time I open a new tab, I come to a page with google search and the firefox logo.

  Everytime I open a new tab, I'm greeted by this page

  http://blog.Mozilla.org/UX/files/2012/05/Firefox-beta-13-redesigned-About_Home-Page1.PNG?128c42

  Is a small problem for me, because when I want the cursor at the beginning in the adressbar. So, if for example, I opened a new page, I type in imdb.com I receive directly on imdb.

  Today, however, with the Home tab firefox screen. I have to do a google search for imdb.

  A small problem perhaps, but enough to be annoying.

  Is there a way to move the settings or something similar, and keep the cursor in the address bar after you open a new tab?

  Hello

  If you only want the new tabs do not have home page, you can change it by going in your Subject: config page and replacing "browser.newtab.url" Subject: vacuum. For me at least, if I open a new tab on a white page, the cursor remains the address bar.

  In order to change your Firefox Configuration please follow the following steps:

  1. In the address bar, type Subject: config

  and press enter. The subject: config "this might void your warranty!" warning page may appear.

  1. Click on I'll be careful, I promise! to keep the comments: config page.

  If you also want to change your home page to a blank page, you can do so in virtue:

  • (on Windows) Tools > Options > general, or
  • Menu

    

    > Options (preferences on Mac and Linux) > general

  Then change the dropdown to "when Firefox starts:"so that it is set to 'Show a blank page'.»

  Note that you can continue to do research on the awesome bar and search bar where you want to do a Google search.

  Does this solve the problem? Let us know.

• Where to keep the drive internal or external libraries?

  Question #1. I'm an old school and used to keep the media on an external drive and internal SSD flash disk application. (FCP7) I was thought to keep them separate for optimal performance. Now, I hear very often to keep the libraries on SSD internal flash drive. Why? First of all I can't consolidate as images can fill the space.

  Question #2. I am using a Seagate FW 800 as external, is replacement with USB 3.0 would improve performance?

  Question #3. I have many USB 3.0 devices. I have to constantly to move as my iMac does not provide sufficient USB3.0 outs. I read that USB powered ports creates problems.

  Thank you.

  P.S. One of the 3rd party plugins companies support highly advisable to keep the libraries on a flash SSD drive internal

  1. it may be a valid option to store the library on an SSD - especially if you travel and work on a laptop but I'm not hearing, saying that it is the best practice.  And you're right that media can fill disk quickly enough. What developer recommends it?

  2. Yes.  I guess that your connection to the FW drive is via an adapter Thunderbolt. So you should be really better off choosing a Thunderbolt drive.

  3. possibly. Maybe someone else will be chime.

  Russ

• What is the best keep the battery in the best performance?

  Is how better consider keeping batteries for laptops in the best performance: 1-supported always. 2 - Use batteries for laptops without plug in power when the battery is charging.

  Hello

  It makes no difference which way you use because if you keep the AC/DC adapter is plugged in and the battery is fully charged, the battery will not be used. It will only be used if you unplug the AC adapter.

  In addition, a battery can be recharged up to 500 times so I always work with connected AC/DC adapter. But I would say to completely load and unload the battery from time to time. ;)

• Is it possible to keep the timer "always on top"?

  When you use the timer I like to keep the timer of disappearing from the screen saver, but I didn't understand how to do... If that's possible.  After the timer starts, he goes down to a few seconds and the clock face appears again.  To check the time remaining on the timer, you must click to the home screen and select new application timer... which, in few seconds again goes to the background and the face of the clock reappears, again he must open the clock app to see the remaining time.  If there is a way to keep the timer "on-top" without having to repeatedly touch the screen during execution of the timer, I have not discovered.  I would also add the timer to my eyes so I can toggle to him as well.  Of course, I can do it on my iPhone, but the Watch has not yet this ability.  Apple engineers could make sure with the timer and the timer if they see the need.  Are there others who want that ability as well?  I think so.

  Hello

  It is not currently possible to add Timer looks. However, your watch can be configured for more convenient use of the application of the timer:

  • Set your watch to return to the last app used to raise your wrist:
    • On your iPhone, in the application of the watch, go to: Watch My > General > wrist Detection - turn on.
    • On your iPhone, in the application of the watch, go to: Watch My > General > screen Wake:
      • Raise the topic on the wrist, select RESUME last activity.

  After you start a timer by opening the timer app, your watch will return to timer (for as long it remains the last app used) when you then lift your wrist.

  • Add a Timer to your dial of the watch as a complication. When you view the time on your watch:
    • Firmly press the display > drag left / right to the face of the watch you want to customize (not to slip if you want to customize the current face of the watch).
    • Press the Customize button.
    • Some watch faces offers more than one screen customization options > move left until you reach the last screen to select (if available) complications.
    • Tap a complication to customize what is shown in this place.
    • Turn the digital Crown to scroll through available there complications until you reach Timer.
    • Press the digital Crown, then press the dial to return.

  To start the timer directly from your watch dial, press the complication. Once started, the remaining time will be then showed complication on your watch until the end of the timer dial, when the application opens for you to make them disappear.