Similar Questions

• I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

  I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

  The primary partition has the following folders (including hidden & system)

  The recovery partition has the following (including the language files more)

  Someone at - it ideas why my laptop does not work?

  Thank you

  Greg

  Hello

  You press F11 on startup with a HP Compaq to start the recovery process.

  For problems with the recovery process, you will need to contact HP.

  BIOS problems:

  There are messages for the HP Forums for posters with similar errors:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

  All the answers it point to a drive about to fail

  See you soon.

• HP Laserjet installation on Windows 2012 print server

  Hello Forums HP

  I try to add a Hp Laserjet P4515 on a Server Windows 2012 print and update its parameters to itself all 6 trays installed.

  I realized that on a Windows Server 2003 print using HP PCL 5 universal print drivers by using the Automatic Configuration under device settings option in the printer properties. However, following the same procedure on the server of 2012 option Update configuration is missing.

  I left the configuration of the printer automatically select the driver which is listed as HP LaserJet P4515 PCL6 on the name of the driver class and Micorsoft Point and print on the Advanced tab.

  Does anyone know how to get the driver to update the config?

  Regards,

  Cam

  I finally got this working. Remove the printer and starting from scratch.

  I have downlaoded 32-bit and 64-bit drivers PCL6 and extracts into a folder. Started the installation of the new printer manually and unchecked the box detect automatically the driver. Come in 64 bit location extracted folder and allow the driver to install manually. When installation is completed I went the printer properties/sharing tab and select additional drivers and checked the x 86 button. Then, said the browser in the 32-bit extracted folder.

• Problems with the installation of Windows 2012

  Hello

  I suck with creating a virtual machine as a server windows 2012.

  on the creation of the vm I then run the installation since the data store disc. When I selected the language and then clicked on install I always get a screen around "media not found driver...". ».

  I can't get around that, any ideas on how to fix?

  Hi again jmwebster,

  We had a number of previous reports of the non-Microsoft browsers forum repeatedly truncating the download of the installation of Windows 8 media.  If you still don't have success with your most recent upload and you are not already using Internet Explorer, it may be worth your while to use IE for this download Windows Server 2012.  I have not passed through the procedure myself, but apparently if you use IE you should be given the possibility to use a download manager to manage the download and verify its integrity and passing by that the procedure seems to have led to more positive responses from users of the forum who have problems before and had tried to download several times.

  Good luck with it!

  --

  Darius

• Agent Oracle 12 c deployment Windows 2012 R2 (x 64) fails with exit Code: 127

  EM 12 c Cloud control fails to add target Windows 2012 R2 host

  Description of the problem

  ---------------------------------------------------

  OEM12c box:

  Oracle Linux 5; EE database Oracle 11.2.0.3, OEM Cloud control 12 c - 12.1.0.3 + the last plug-ins

  Target area:

  Windows Server 2012 R2 Standard; Oracle 12.1.0.1 EE database

  Try to add the target host of Windows in the cloud of control and the prerequisites checks fail and cannot continue the deployment.

  OEM12c > Setup > add target > add target manually > add target host > Add Host

  Hosting platform

  mcsdbora2. ESRI.com Microsoft Windows x 64 (64-bit)

  Error

  Executing the command c:/oracloud/ADATMP_2014-03-21_09-19-19-AM/prereq_stage/core/12.1.0.3.0/oui/bin/setup.exe - prereqchecker-silent - ignoreSysPrereqs - waitForCompletion - c:/oracloud/ADATMP_2014-03-21_09-19-19-AM/prereqlogs prereqlogloc - PREREQ_CONFIG_LOCATION=c:/oracloud/ADATMP_2014-03-21_09-19-19-AM/prereq_stage/core/12.1.0.3.0/prereqs-J DORACLE_HOSTNAME = mcsdbora2.esri.com - DAGENT_PORT = 3872 - DALLOW_IPADDRESS = true on the host mcsdbora2.esri.com Failed oracle.sysman.top.agent_Complete entry point

  Cause: "Error Message: not available Exit Code: 127.

  The SGD log location:

  mcsoracloud.ESRI.com:/u01/app/Oracle/gc_inst/em/EMGC_OMS1/SYSMAN/agentpush//2014-03-21_10-25-47-AM/applogs/mcsdbora2.ESRI.com_deploy.log

  Target area: C:\oracloud\ADATMP_2014-03-21_09-19-19-AM\prereqlogs is empty.

  MOSC: My Oracle Support community

  EM 12.1.0.3 agent for Windows 2008 server x 64 bit installation fails

  "This is related to the issue being reported in note: 1631508.1 ' EM 12 c: Agent push the target MS Enterprise Manager 12 c Cloud control Windows host fails remote verification of prerequisites.

  "The version of cygwin has been recently updated on cygwin website.  This caused bugs: 18250066, which means that it is not possible currently to deploy an agent on windows if you are using the latest version of cygwin. »

  "Workaround in the meantime would be to do a silent install of the agent or install an older version of cygwin"

• HP ENVY m6-n113dx Notebook PC: new installation of Windows 8 on HP Envy and with problems of drivers.

  I have a laptop HP Envy M6 and it came with Windows pre-installed on it 8.1. I always do a new installation of Windows, whenever I have buy a laptop that I hate all the bloatware and stuff which they pre-install on it.

  Unfortunately, when I did, I found that the drivers on the HP website do not work for some things, especially my wi - fi.

  In Device Manager there are three things that make their appearance as having a problem:

  Network controller:

  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C & REV_01

  Unknown device:

  ACPI\VEN_HPQ & DEV_6001

  Unknown device:

  ACPI\VEN_HPQ & DEV_6007

  If anyone can provide me with some drivers work, I would be incredibly grateful. I called HP and they told me all I can do is to pay $40 for a CD delivered to me so I can reinstall the version of bloatware, and I really want to do. I want to use my real version of Windows 8 and not pay for something I don't even want.

  Thank you!

  Nevermind, I fixed it myself by reading old son of Paul_Tikkanen

  I used http://www.pcidatabase.com/index.php

  and found the diver that I needed, and now I don't have to pay $40 for the version of bloatware.  Yay!

  Thank you Paul!

• Instructions for the installation of Windows 10 on Dell Optiplex 755 with running Windows 7

  I need instructions on how to install Windows 7 to 10 Windows on a Dell Optiplex 755.

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Installation of Windows server 2008 on Poweredge R320

  Hello everyone

  We bought a new Poweredge R320 server in order to install 64-bit Windows Server R2. There are 2 drives inside and they are preconfgured as raid1.

  I changed the configuration of SATA in RAID mode and also initialized by PERC-H310 RAID1 without any problem. When the server starts up, I see the following messages.

  We found no Raid 0 disks

  1 Vitrual disk (s) were found.

  
  I can boot from the windows media but no disks are found and is prompting me to browse and install the drivers from nesseray. So I downloaded

  SAS Raid drivers from this link: ftp://ftp.dell.com/Pages/Drivers/poweredge-r320.html#Drivers%20for%20OS%20Deployment

  Windows 2008 R2 64 Bit driver for controllers in PERC H310/H710/H710P/H810 Windows 2008 R2 64 Bit driver for controllers in PERC H310/H710/H710P/H810

  Recommended

  5.2.220.64

  18/10/2012

  Windows Windows Server 2008 R2

  The name of the file is: DRVR_WIN_M20VR_5.2.220.64_A02_ZPE.exe

  I extracted the contents of a USB, restarted the server and when you are prompted for drivers during the windows installation, I traveled to USB which 2 files are found.

  nodev.inf

  percsas.inf

  I tried both of them, but every time I get a message saying to make sure that the correct drivers are found. It seems that is not the correct drivers.
  

  Could be he you please direct me to the correct drivers? Or if you have any suggestions please let me know.

  Thank you very much

  Goudeuk

  Even I have the same problem... Can anyone suggest a solution?

  Thank you

  Scott

  http://www.vmexplore.com

• Very slow install Windows Server 2008 on PowerEdge R900

  Hello guys,.

  I have a problem with the installation process on R900. Its takes about 3-4 hours.
  After the installation of the performance of the system are very low.
  Operating system is installed on the RAID 1 (Perc 6 / i) but by Qlogic card I have connected 100 other disks that I saw on the screen of installation of cane.

  I try to install another system, but is the same. I remove RAID and then create RAID 1 - still the same.
  I used SUUB, but without success.

  Did anyone have simillar problem?

  Before this ws2k8r2 Ent core facility has been installed, and everything was ok.

  Thanks for the help,
  Martin

  Have you tried to use Windows without these cards of fiber channel connected to see if that makes a difference?

• Installation of Windows Server 2008R2 on Poweredge R320 fails

  Hello

  It is not possible to install W2008 server.

  The Windows Installer process request a CD/DVD driver. We have no CD driver and we did not found a DVD driver on the support sites.

  Any ideas?

  Thank you for the help

  Stephan

  Try disabling the S110 controller built into the BIOS.

  You can also try loading the drivers for this controller during the installation.

  If none of the above works, your installation media is likely bad.

• Installation of Windows XP on Satellite A210-133 with success

  I have read many topics related to this... and no simple and easy... but accessible, so, without other comment, that's what I did... install WinXP SP2 as on any other pc/laptop... It will display an error, (just click ok and let the installation continue).

  When installing WXP is done, download the drivers from the first model which has the support of Windows XP Home edition, (they work for me) and install them manually. (Again, this works for me!) Simple as that!

  Oh, almost forgot! It's http://209.167.114.38/support/Download/ln_byModel.asp where u get the drivers you need for your laptop computer series A!

  Good luck!
  [email protected]

  Hello Andrei

  Thanks for this useful info! ;)

• Installation of Windows XP on a new PC with a separate hard drive

  I heard many different answers from others to do what I want to do.  Finally, my old PC crashed on me, so I recently built a new PC that is out of date.  I had Windows XP and now Windows7, but for some programs that I want to use XP and this is why I am looking for an extra hard drive to run my XP and of course boot and when I want to.  The thing I heard between 2 different people, that brings me here to find out for myself.  Told that "your code of disk and windows activation is saved with your motherboard you had on your old PC and so it will not recognize it for your new.  The other person has said "if I'm not mistaken they allow the transfer up to 3 different PC with your windows disk.  My question is that I am able to install and activate my Windows XP on my new PC and if so how many different PC can I install my windowsXP on before that I have to buy a new disc?

  Hello

  If your XP is preinstalled on the old computer (Dell, HP, Acer, etc.) or if you have an OEM System Builder License, it is an OEM license.

  An OEM license is not transferable and is related to the first computer that is installed on the license dies when the computer dies.

  Without reinstall on another computer or activation is allowed.

  If you had a license to retail sales of XP that you have purchased and installed yourself on the old computer, it is transferable.

  The only condition is that a retail license can be installed on a single computer at a time.

  One license is for a single installation.

  And I suggest that you ask in the Windows 7 Forums on the installation of compatible XP programs in Windows 7.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7

  See you soon.

• Installation of Windows 8 RP as defective guest with "unattended answer file.

  I can't install Windows 8 Preview Release 64-bit as a guest under 64-bit OpenSUSE 11.4

  I was choose Win7 64 bit since there is still no Win8 on the vmPlayer 4 and I also tried to install as an operating system "other 64', but he stops just a message like this:

  Windows can not read from the file unattend parameter < ProductKey >ed answer file.

  Windows cannot read the < ProductKey > parameter of the unattended Setup answer file.

  Using or not a produckt key was not important.

  I tried to give feedback so far as 3.6 GB of RAM doesn't always work.

  How can I install Windows 8?

  Do not use Easy Install, select instead 'I'll install operating system later' and install then create a normal life.

• Windows 2012 R2 and vCloud

  Is there a version of vCloud Director 5.1 that supports the installation of Windows 2012 R2?

  Thank you

  Matt

  Hi Matt,

  Based on the history of changes, I can say that Windows 2012 R2 should work perfectly even on 5.1.0 GA of course, it is best to use the latest available version 5.1.x.

  Note that there is no separate guest OS ID for it, so the virtual machine should be defined as Windows 2012.

  Best regards

  Andrii

• Install windows 7 in Envy DV7-7234 with Windows 8 with win7 dual boot and windows 8

  I can install windows 7 in Envy DV7-7234 with Windows 8 buth with dual boot: win7 and windows 8?

  Installing Windows 7 on your HP ENVY computer Notebook dv7-7234nr is not supported by HP. In addition, no Windows 7 driver is listed on HP Software and Driver Downloads page for your computer.

  HP does not recommend installing Windows 7 and it will support the installation of Windows 7 on a computer comes with Windows 8. HP doesn't provide drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not support some of the hardware or software designed for the computer.

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  You will need to DISABLE 'Secure Boot' and ENABLE 'Legacy Support' in the ' settings of BIOS ' settings below page;

  

  Then, start Windows 8 and run the console 'disk management '. Using "Shrink Volume", reducing the size of the "C:" partition about half of its original size. Name of the partition "C:" to something like "Windows 8". Now, start the computer from the Windows 7 DVD, making sure to select "UEFI - internal CD/DVD" or "UEFI - ATAPI CD/DVD ' and not ' Legacy - CD/DVD internal."  (I recommend using a disc of Windows 7 SP1latest drivers have been included in this topic. The use of the SP1 disc usually resolves most disk hard AF and other issues. )

  Install Windows 7 on the partition without label that was established earlier when you shrunk the partition "C:". Continue to install WIndows 7 by / responding to all the guests. Once you download Windows 7 on your computer, we have to track down the compatible drivers for it. Please list all the "hardware ID" for unknown or missing devices.

  Please send Bravo