AutoStart, more than one virtual machine in Fusion?

Similar Questions

• More than a Virtual Machine on vSwitch\Virtual Machine Network will be NOTconnect

  I have a problem when I start more than one guest on a single vSwitch will connect to the network.

  I have a DELL of 710 with 4 network cards installed.  2 of them are assigned to network management.

  I created a vSwitch1 using 2 other network adapters and that assigned to the virtual machine network.

  I then can't get one of the Virtual Machines to connect to the network.

  Then, I created vSwitch2\Virtual Machine Network2 and use 1 NETWORK for each virtual network card and can then get 2 connected Virtual Machines.

  Any help would be appreciated

  Thank you

  Phil

  Sounds like your network switches is configured to only allow one MAC address per physical port.

  -

• Failed to retrieve more than 100 virtual machines by using the method PropertyCollector and WaitForUpdatesEx

  With vSphere SDK for .NET. Sorry, could not find a forum .NET for vSphere SDK, but the Java forum should be close enough.

  I have problems of retrieval of a list of virtual machines from a Pool of resources. More precisely, if there are more than 100 mV (104 in my case) in the folder or the Pool of resources returned UpdateSet can have 100 items in there.

  The offending code is the following:

  UpdateSet uSet = pc. WaitForUpdatesEx (string. Empty, new WaitOptions() {MaxWaitSeconds = 0});
  Console.Writeline (uSet.FilterSet [0].) ObjectSet.Count); will always contain no more than 100 items

  It seems to be a difficult cut off the coast of 100 items.
  WaitOptions of WaitForUpdatesEx contains a property of MaxObjectUpdates of literature

  "The maximum number of entries in ObjectUpdate which must be returned in a single result of WaitForUpdatesEx. See truncated

  An undefined value indicates that there is no maximum. In this case political PropertyCollector can still limit the number of objects that appear in a UpdateSet. »

  But what is the policy of 'PropertyCollector' that it is? I've been trawling the web and will find absolutely no mention of this in all others in the documentation.

  I also tried to put right in a a MaxObjectUpdates = 150 just to see what would happen. Yet once only 100 items returned.

  For reference, here's a more complete article of the code:

  EntityViewBase folderMngObj = GetVsphereVmFolderManagedObjectRefId (vClient, vSpherefolderName);

  If (folderMngObj! = null)
       {
  ManagedObjectReference svcRef = new ManagedObjectReference() {Type = 'ServiceInstance', Value = 'ServiceInstance'};
  SrvInst ServiceInstance = new ServiceInstance (vClient, svcRef);

  ServiceContent sContent = srvInst.RetrieveServiceContent ();
  ViewManager viewManager = new ViewManager (vClient, sContent.ViewManager);
  PropertyCollector pc = new PropertyCollector (vClient, sContent.PropertyCollector);

  ManagedObjectReference cvMngObjRef = viewManager.CreateContainerView (folderMngObj.MoRef, new String() {"VirtualMachine"}, false);
  ContainerView cv = new ContainerView (vClient, cvMngObjRef);
  PropertySpecList list < PropertySpec > = gcnew List < PropertySpec > ();

  foreach (string propertyPath in vmPropertyPaths)
            {
  PropertySpec propSpec = new PropertySpec();
  propSpec.PathSet = new String() {propertyPath ;} }
  propSpec.Type = 'VirtualMachine';
  propertySpecList.Add (propSpec);
            }

  PropertySpec [] propertySpecs = propertySpecList.ToArray ();
  PropertyFilterSpec pfs = new PropertyFilterSpec();
            pfs. ObjectSet = new ObjectSpec [] {CreateObjSpec (cv)};
            pfs. PropSet = propertySpecs;

  / / Create a property with partialUpdate is true
  PropertyFilter pf = new PropertyFilter (vClient, pc. CreateFilter (pfs, true));

  / / Wait that initial udpate with the version string empty
  UpdateSet uSet = pc. WaitForUpdatesEx (string. Vacuum, new WaitOptions() {MaxWaitSeconds = 0})

  / / Here uSet.FilterSet [0]. ObjectSet will always contain not more than 100 items

  viewTable = OutputDataset (uSet);
            pf. DestroyPropertyFilter();
  }

  Any help would be appreciated.

  What is the value of the indicator "truncated" in the returned UpdateSet?

  http://www.VMware.com/support/developer/VC-SDK/visdk41pubs/ApiReference/vmodl.query.PropertyCollector.UpdateSet.html#truncated

  If set to true, you must call waitForUpdatesEx (with the version of the UpdateSet) back to get the rest updates.

• spend crashes after trying to start more than 1 virtual machine.

  Hi - I'm under CentOS 5.4 x 64.  I had an installation of VMware Server 2.0 running for awhile now.  I did just update this afternoon and now as soon as he tried to run more than 1 VM (I 5 who need to start), accidents pass after the first runs.  I thought that maybe there was a problem with the kernel so I started out of the previous kernel and still no dice.  I tried to do a complete uninstall of Server 2.0 (cleaned up/etc/vmware and/usr/lib/vmware) and then installed the 2.0.1 version.  I was able to enter the console, import my machines and then as soon as I had one running and tried to do something else, pass crashes.

  Here are a few journal entries I see:

  Disconnect the current control: /data/VM/WAVSWI8/XP_SP3.vmx

  2009-10-22 22:10:19.963 'vm:/data/VM/WAVSWI8/XP_SP3.vmx' 1091524928 info Request for information: fatal error VMware Server: (worker #1).

  Unexpected signal: 6.

  A log file is located in ' / data/VM/WAVSWI8/vmware.log '.  Please request support and include the contents of the log file.

  To collect the data to submit to the VMware support, select help & gt; Topic and click 'collect data for support. You can also run the script 'vm-support' in the folder my computer directly.

  We will respond on the basis of your entitlement to support.

  Id: 2: Type: 3 default: 0, number of options: 1

  2009-10-22 22:10:19.964 "vm:/data/VM/WAVSWI8/XP_SP3.vmx" 1091524928 WARNING Could not find activation record, user unknown event.

  Disconnect the current control: /data/VM/WAVSWI8/XP_SP3.vmx

  Event 13: Message on WAVSWI8 on fs10 ha-Datacenter: fatal error VMware Server: (worker #1).

  Unexpected signal: 6.

  A log file is located in ' / data/VM/WAVSWI8/vmware.log '.  Please request support and include the contents of the log file.

  To collect the data to submit to the VMware support, select help & gt; Topic and click 'collect data for support. You can also run the script 'vm-support' in the folder my computer directly.

  We will respond on the basis of your entitlement to support.

  ASSIGN RecordOp: latestEvent, ha-eventmgr

  2009-10-22 22:10:19.966 "vm:/data/VM/WAVSWI8/XP_SP3.vmx" 1096735040 WARNING Received a double transition of Foundry: 1

  2009-10-22 22:10:19.966 "vm:/data/VM/WAVSWI8/XP_SP3.vmx" 1089206592 WARNING Received a double transition of Foundry: 1

  vmdbPipe_Streams could not read: OVL_STATUS_EOF

  VMHS: VM connection broken: cfg: /data/VM/WAVSWI8/XP_SP3.vmx; error: Pipe: failed to read; State: 3

  Disassembly of the VM: /data/VM/WAVSWI8/XP_SP3.vmx

  VM full disassembly: /data/VM/WAVSWI8/XP_SP3.vmx

  State of Mount values have changed: /data/VM/WAVSWI8/XP_SP3.vmx

  Reloading of config State: /data/VM/WAVSWI8/XP_SP3.vmx

  VMHS: Past vmx/execState/val of poweredOff

  Caught signal 11

  The vmware.log that is referenced above is filled with a bunch of debug messages (I have attached the file b/c There are a LOT of them).

  Anyone else see something like that?

  Thank you!

  Don

  Hello

  Looks like you're bumping into a known problem.

  Please read this: http://planetvm.net/blog/?p=844

  and then click on the link on the bug report in this article because it has the steps to solve your problem.

  Good luck!

  --

  Wil

  _____________________________________________________

  VI-box tools & scripts wiki at http://www.vi-toolkit.com

• How can I add more than one virtual network card?

  I am running Small Business Server 2003 as a virtual machine, there is only one NIC given by VMWARE, I want it 2 because it is a requirement of SBS. How can I do this?

  Thank you

  Jane

  One of the known limits of the VI Client is that it won't change VMs virtual hardware is a greadter of the version 4. Server 2.0 creates VMs version 4 so it looks that you have upgraded the hardware, possibly for support of USB 2.0, which means that you can change only the user Web interface unless you want to do this via the directly .vmx file manually editing.

  You can add the material in the web user interface, you select the virtual machine in the left pane on the left by clicking on it and select "Add Hardware" as directed by the attached screenshot.

  There are ways to downgrade to a hardware version 4 - I only if necessary upgrade for most of my virtual machines are 4 so that I can use the VI Client.

• FT in case of failure due to the VM has more than one vCPU

  I am so excited to try FT 6 ESXi.

  However, when I activate the FT function, I get the error:

  'Entity VM_Name fault tolerance configuration has a problem: the virtual machine has more than one virtual CPU. "

  

  I set config to do anything?

  Please notify. Thank you!!

  I got the answer of the VMware consultant.

  IDE is not taken in charge for SMP - FT.

  Thank you!

• The list of all virtual machines with more than 2 virtual disks

  Hello.

  I want to list all virtual machines in a data center vCenter, who got more than 2 virtual disks. Here's the workflow, I am working on that:

  1 get the view of data center

  2. get the Cluster Data Center view like the 'begine_entity '.

  3. for each view cluster overview the VirtualMachine bit cluster seen as 'begin_entity '.

  4. for each VM view, this information: VirtualMachine-> config-> hardware-> device of

  Above information is a table.

  I need help in order to extract information from this table disk, then run an if condition where the VM who got more than 2 discs should print.

  Could help you. I wrote the script to the point 4. just need advice for the posterior.

  Thank you.

  You can try one of the following values-

  1 If ($vm-> {'summary.config.numVirtualDisks'} > 2) {...}

  2 $diskCnt = grep {$_-> isa ('VirtualDisk')} @{$vm-> {'config.hardware.device'}};

  The above assumes that you've got your $vm with a filter property as follows:

  $vms = Vim::find_entity_views (view_type-online 'VirtualMachine'), the properties-online ['summary.config.numVirtualDisks', 'name', 'config.hardware.device'];

  my $vm foreach (@{$vms}) {}

  ...

  }

• Fusion EULA: Install on more than one Mac?

  I did some research, but I can't always find the EULA for the merger.  I hope that's not obvious from somewhere and I watched it right in front of her.  And shame on me for not actually read the EULA, when I installed it, but...

  I want to know if purchasing a license of merge per user or per computer.  I have found a few discussions on this, but the two sons have been largely speculative since they were posted in 2007 during the beta (pre 1.0).  Now that we are at version 2.0:

  -is the EULA posted on the site somewhere?  Could someone put a link in this case?

  -specifically, I own three Mac: a 15 "macbook pro, an iMac 24" and a Mac Pro.  Can I legally install my a copy under license on all three?  Is not for professional use; I'm just a guy with three personal computers is everything.

  I have collected in my reading that I can't run on more than one machine at a time, and it won't be a problem.

  Thank you.

  VMware Fusion 2 EULA is here: http://www.vmware.com/download/eula/fusion2.html. You can also display the EULA in the merger Help menu: help > license agreement.

  You can find the answer at 9. 1A and 9.1 (b). But the short answer is licensed per machine.

  David Liu

  Product Manager

  VMware

• Download to more than one machine

  Hi, I'm about to buy an iMac so I'll have two running.  A new will be used only for editing in lightroom.  Download LR at more than one machine?

  Hello

  Yes, you can install and activate the Adobe product on 2 computers (MAC or Windows) with 1 license, but can use it only 1 computer at some point of time (not both at the same time)

  Thank you.

• Can I run more than one Node Manager by machine?

  EIS,
  
  We have a situation in our project, where we need to run different areas on a Solaris machine in modes different from java.
  Domain1 say must be running in the 32-bit version of java while Domain2 should be run in 64-bit mode because of the nature of the tests currently underway in different areas.
  We could successfully get both running in different modes of java at the same time by changing the startup scripts to decide what data model South to start the servers based on some parameters. However, the pain here is with the node Manager.
  
  I believe that there should be a Node Manager running by the machine for all areas currently running on this computer. Whenever I have to run a different mode than what Node Manager domain runs on java, so I had to kill the node Manager and launch it in the same version that I want to start other servers in as Node Manager uses his departure parms internally to start managed servers (Note: there is no problem in running the administration server regardless of the node as expected Manager mode).
  
  Can someone tell me if there is a way around these problems?
  I want to know if we can run more than one Manager node by machine.
  
  Here are the details of my approx.
  
  WebLogic Server 10.3
  Solaris 10 SPARC 64 bit (SunOS 5.10 Generic_142900-14 sun4v sparc)
  Java version "1.6.0_20.
  
  Hope that all makes sense...
  
  See you soon,.
  Satish.
  
  Published by: apsnaidu on March 15, 2013 15:29

  Running multiple NodeManagers with different settings on the same box: -.

  http://Tim.blackamber.org.UK/?p=797

• How to list all the vm with more than one network card?

  Hello

  Is it possible to only list all my s vm in my environment with more than one network card?

  I tried using the Get-NetowrkAdapter cmdlet, but could not get the desired results.

  Get - VM | Get-NetworkAdapter | Select-Object Name. ConvertTo-HTML-head $a - body "Virtual Machines < H2 > < / H2 > ' | Out-file D:\vms.htm

  Thank you

  Hello, AGFlora-

  Of course, you can do this with the standard as cmdlets:

  ## using standard cmdletsGet-VM | Select Name, @{n="NumNICs"; e={(Get-NetworkAdapter -VM $_ | Measure-Object).Count}} | ?{$_.NumNICs -gt 1}
  

  Or, if you want to get the results a little (or a lot) more quickly, you can use the cmdlet Get-view as:

  ## fast-like, using Get-ViewGet-View -ViewType VirtualMachine -Property Name,Config.Hardware.Device | Select Name,@{n="NumNICs"; e={($_.Config.Hardware.Device | ?{$_ -is [VMware.Vim.VirtualEthernetCard]} | Measure-Object).Count}} | ?{$_.NumNICs -gt 1}
  

  Those are both by selecting the names of virtual machines and their number of network cards.  Then you can direct this output to Export-Csv, ConvertTo-HTML, what you like.  What to do for you?

• We have more than one PC connected to the same (IMAP) account, there is an error sending server and works as a single computer at a time.

  We have three computers to check the same email account (IMAP) and when more than one is not working and try to send a message is displayed:. 'Server offline [email protected] that the server may have dropped or there may be a network problem.
  Right next to Thunderbird on other computers, with only a computer connected to the error disappears, and everything works fine.
  When that happens, sometimes gives error when sending an e-mail, "error save message in sent" and the mail is not stored in the thunderbird or on the server, but is sent.

  Menu Tools > account settings > server settings > asvanced and reduce the number of connections from 5 to say 2 and see how it goes. I m the connection altogether on the total machines is the question can be reduced then should help.

  Seriously have several concurrent users is not a good way to manage an imap account.

• HP Simplepass allows not more than one fingerprint

  Hi guys,.

  I have a HP ENVY 15-j112tx, I had now since the beginning of this year as a replacement for my TouchSmart from HP ENVY 15 - j009tx which broke down at Christmas. On my j009tx, I was able to attend several fingers, the software looked just like the pictures on the HP site tutorial, to implement simplepass. On this new laptop however, there is no possibility to register more than one finger, I can't seem to find anything in help for it and I don't know how to upgrade or downgrade the software that came with my previous laptop.

  If anyone knows how to get around this problem, I would really appreciate help!

  See you soon

  Hi Krystian,

  I'm fiddling around with a machine of tower that we have here, and I think that I thought about it. Open your Simplepass and go to my settings (the gear icon) and select Edit. Make sure 'use of fingerprinting as my SimplePass' is checked, and select next. You will then be asked to scan a fingert. Once you have saved the impression, it will keep two fingerprints.

• LRT224 impossible to deal simultaneously with more than one VPN tunnel?

  We have configured a client to gateway VPN tunnel group and six in the tunnels of single user gateway on a LRT224. Each unique connection works perfectly using Shrew soft client. But when we try to connect with a second tunnel, the first tunnel disconnects. It seems that the LRT224 cannot process more than one VPN tunnel at the same time? Is there any configuration, that we would have missed?

  TLR log seem to indicate that the Shrew Soft customers use all 192.168.30.0 that their IP address instead of a random IP address in this range.

  Try to set each Shrew Soft client with a specific IP address in the 192.168.30.1 - 50 rank instead of ' use virtual adapter and address randomly.

• Rename more than one printer on the same network wireless

  I use a HP Officejet Pro 8500 a Premium. We have more than one printer in our office who will use the same WiFi.

  However, it is difficult for the end user to understand on which printer to use as they both are the same except for a random string at the end. We cannot find any rename them so that they can appear with a location. Is this possible?

  Note: I use Mac OS X (Lion) (Hello). I found the 'active' name, but this does not seem to post anywhere. I am limited to the web browser interface, because there is no full software for OS X Lion still.

  Thanks for the reply. This solution renames ONLY for the current user as this information is stored on the local computer.

  However, I found the solution!

  Via the Web Interface, go to the network and then select Hello in the menu on the right. You can then rename the printer to everything you love.

  While you're there, go to Internet Printing Protocol and change these settings for windows machines. Also, click the host name and change the host name so that it might be better in a windows workgroup.