Availability of the table

Similar Questions

• Generate data that are not available in the table

  I have a table that has monthly data for agents. Example of table structure is the following:

  create table agt_dum)

  agent_id number,

  number of months,

  Commission number)

  Examples of data include:

  AGENT_ID MONTHS COUNCIL

  1	1	50
  1	2	100
  1	6	25
  2	1	10
  2	2	20

  Month value can be from 1 to 12.

  So as you can see these data is missing for the agents a few months.

  Here, the requirement is I need to generate data for each agent for 12 months. If the data is not already in the table and are should include agent_id, month number and commission is equal to zero.

  The output for the above data would be:

  AGENT_ID MONTHS COUNCIL

  1	1	50
  1	2	100
  1	3	0
  1	4	0
  1	5	0
  1	6	25
  1	7	0
  1	8	0
  1	9	0
  1	10	0
  1	11	0
  1	12	0
  2	1	10
  2	2	20
  2	3	0
  2	4	0
  2	5	0
  2	6	0
  2	7	0
  2	8	0
  2	9	0
  2	10	0
  2	11	0
  2	12	0

  I tried SQL query with full outer join. I was able to generate data for columns of MONTHS and the COMMISSION using the NVL function. But I have been unable to generate the AGENT_ID.

  Please share your suggestions.

  I'm using Oracle 11 g 2.

  Thank you

  Sudhanshu

  If you need something like:

  WITH agt_dum (agent_id, MONTH, commission)

  (SELECT 1, 1, 50 IN all double union)

  Select 1, 2, 100 of all the double union

  Select 1, 6, 25 Union double all the

  Select double union all 2, 1, 10

  SELECT 2, 2, 20 DOUBLES)

  all_months as (select rownum as LUN double connect by rownum<=>

  SELECT *.

  To all_months:

  partition outer join agt_dum ad bequeathed (agent_id) on (ad.month = am.mon)

  /

  It is not yet complete, but I'm sure you can handle the rest...

  HTH

• Available to the table not for online stores?

  Is there a way to get BC to not render a table to a category page? As we know all tables is not very useful if you want your site to be admissible.

  I found this post that details how to use javascript to replace the table with any schema that you want (in this case list items):

  http://forums.Adobe.com/message/4238734

  Works great!

• Notes to the tables

  We have started using notes in the ID - & can't seem to post them in the tables. Is not a function?

  Oops, hit send too early. Notes are available in the tables from CS4.

  Bob

• I am not able to see all the fields in the Contact table available on the report of the Contact field values?

  Hello!

  I'm looking at an instance of Eloqua shows that 10 of the possible 100 s of the fields in the table contact E10.  Where are the rest of the fields?

  Kind regards

  Alok

  Hi Alok,

  We have seen, the installation program for all sorts of things, but you can set a maximum to see everything you want to see. If you are the administrator, you can go to settings-> fields & views. Here, you can switch around with how you want it to look.

  Kind regards

  Alok

• deleted table showing nt available in the database

  Dear friends,
  
  my database is running in mode newspaper archive and I dropped a table say table1.i ran the RMAN command below
  
  RMAN > run
  2 > {}
  3 > restore database;
  4 > restore database;
  {5 >}
  
  in the above command we restore from backup and applying all archivelogs, m I right?.
  After the restoration and recovery of the database by using the RMAN command above, when I checked the deleted table table1, I m getting error - table1 does not already exist in the database.
  can you please tell me why, after restoring and applying all archivelog why I have not dropped the table?
  
  OS-linux rhel 5.7
  DB - 10.2.0.3

  Mihael I m still confused because why the fall did not return after executing a full recovery of the database using the RMAN commands shown below

  RUN
  {
  RESTORE THE DATABASE;
  RECOVER THE DATABASE;
  }
  can you explain please?

  complete recovery means apply all changes to the database, including the fall of the table

• How to keep the tables in mode fixed?

  Don't know about you but I'm not used to the fact that available in many 3.5.3. moves horizontally and vertically. It distracts me a lot, especially with the touchpad on my Macbook Pro. Is there a way to get rid of this automatic void of white on the sides and bottom. If the table is small, there is no need to make "wobbly", don't you think?

  Someone at - it an idea?

  Hi BassPlaya,

  I think that what you are wanting to do is to reduce the size of the painting that arrays of numbers are sitting on.

  As I know there is no way to do. You can drag the table upwards and to the left, but do not stop when the yellow guides appear or hide you the first lines/colomns and be unable to view/edit the.

  I found this problem bothers me is no longer on the Mac-I set my scroll automatically.

  Quinn

• Invert the table to the Add element to the front of the performance of Bay

  Hi all

  I read in a few places that reverse an array to add the element to the front of it will give the best performance since no new allocation of memory is necessary.

  I have 2 questions about this process:

  1. "reverse a table on requires pointers change.»

  Is that mean that a table in Labview is like a linked list? who has pointers that point to the next element.

  So when this inverse process occurs, the head of the linked list will be the last element of the array, and all links in the linked list will require a change.

  

  Step 1: table of moose with one extra space at the end

  Step 2: Matrix inverse

  Step 3: Add a new item at the end of the table opposite

  Step 4: Reverse again.

  2. the exercise of reverse Add then reverse is even worse in fact. Why is this?

  

  

  "Overhead" is the need for new buffer allocations, which indireclly affects runtime but also memory.

  Yes, often the paintings have an additional memory beyond the end of the table to avoid the resizing with each adding an item...

  Your FAQ quotes says nothing about any reversal trick. To do this, the elements of the array need reverse look up, then inserted using the space soft (if it exists!), then the need even to reverse ber alements in place. Seems like a lot of work to do over and over again. Yes, it might be slightly more efficient that have to be allocated to each prefix operation but we do not really know what the compiler does. Maybe if soft is available, it would be to move all the items up and insert the element first, make a new allowance that occasionally necessary. Who knows? I have the greatest respect for Darren, the author of the "source". Perhaps he can clarify what he writes.

  Benchmarking valid what is quite difficult.

  In all cases, you often know the final size, so it can be distributed in one shot and the items replaced with valid data that you will. It's always orders if magnutide more effective than any other solution.  If you need to grow an element of a table at a time, add at the end, never at the begginning.

• Subset of the table

  If this isn't really a specific problem of labVIEW, more a problem with my mind does not not as a true programmer to find a solution to a (problem probably straight forward).

  I want to process some data (table of numeric values). The data table is replaced each time new data is available, I have this simulated a little in the attached VI. Now here's the tricky part. The processing window is selected by the user. So if the length of the Strip is 5 elements and the user selects a 7 processing window, the table of the first iteration should be stored (this is not hard using a registry of lag...) and the first 2 elements of the table on the second iteration will be added to the table in the first iteration, then the processing will be done on the data.

  I hope this makes sense, I have attached a VI of a terrible effort for a solution on my part, but I tried a few different ways in this regard and am getting nowhere nearby. I'm sure that registers to shift and/or nodes size table and deal structures, comments should be the main elements.

  Let me know if you need more information.

  In the consumption loop, starts with a shift register that contains a table.  Whenever new data are attached at the beginning of the table.  Then iterate over subsets of the table until the length of the array is less than the size of treatment.  See picture attached (similar to the approach posted by stevem181, his answer appeared while I was working on it).

  

• Build/update dynamically the table 3D

  Hi all

  I'm having a problem with the dynamic generation of a 3D of the following set of data table:

  x: {1,2,3,4,5}

  y: {1,2,3,4,5}

  Z_1: {1,2,3,4,5}

  Z_2: {1,2,3,4,5}

  Z_3: {1,2,3,4,5}

  Z_4: {1,2,3,4,5}

  Z_5: {1,2,3,4,5}

  where there is (5) Z amplitudes associated with each measurement location.  What I am able to statically (from the above values x and y tables 1 d and 2D table Z) is to create a 3D Board made up of x and is indexed intensity to the graphic format of the 2D tables.  Each page of the table corresponds to each of the 5 Z amplitudes measured at each location.  In the attached VI, the Array Build function works perfectly for the static case where the entire data is available.  I followed the example of a another discussion forum will be subject to the provisions of nest two loops construction 2D array in the inner loop and incrementing the pages on the outer loop. The static situation is resolved.

  However, my goal is to graphically present data he is taken, point by point, to the user.  The other attached VI simulates this scenario, incrementation of x and y positions based on the measure button.  Z matrix indicator shows that the 2D Array (each individual page) is in the proper format.  The construction of the 3D picture is dynamically where I'm having problems.  I tried to build table and replace a subset of table, but none of these functions to produce the desired result.

  In the case of building table, 3D table is correctly based on the first measure: for x = y = 1, 2D array page0 is set Z_1 in position (1,1), page1 has the Z_2 value in the position (1,1), page2 Z_3, etc..  However, on the second measure, as expected, the berries are concatenated page5 have Z_1 values in the (1,1) and (2,2) positions.  This result is properly formatted, however, should the counted array 3D page is limited to 5 (page0, 1, 2, 3, 4).  So ideally, page5 should in this case replace page0.  So build array results in the correct format but concatenation is not desirable.

  The subset of spare board was made with the index of the page (outside of the loop) number to specify the subset of the 3D Board needs to be replaced.  The result was an empty 3D array.

  Thank you any help to solve this problem.

  kmsk wrote:

  Any suggestions on how to handle filling out table 3D of unknown size?

  If the size of the final table has a reasonable upper limit, you can initialize an array of slightly oversized, then keep using the subset of the table replace. It will be much faster and more effective memory than gradually more and more large networks.

  When the purchase is made, you can cut to the final size.

  Aircraft add to a table 3D using 'insert into array' or 'Build array' (favorite?), cause memory frequent shifts and might slow down your code by orders of magnitude in casing of excessive fragmentation of memory.

• How to hide data in the table?

  Hello

  I'm using LabWindows/CVI 8.5 and I have a question about the use of tables.

  The problem is this: in my table, I have 8 columns.  I have columns of chains, whole, and a column of buttons - so there is a button on each line.  I have some information about each line I don't want to display in the table, however, I would like this information to be associated with other information on this line.  Each line represents a high lack of information from a log file - level when the user clicks on the button, I want to be able to go to the specified file and extract more detailed information about this flaw and display it on another Panel.  "Hidden" information are (1) file identification number, and (2) seek-card value... or 2 integers.  My problem is how to have these 2 pieces of information available for each line, but they have to be seen by the user.

  There are two ways I see this, but I did not really understand how to make no more.

  (1) I could have each key also contain a string that includes the 2 pieces of information (for example, "32:125567"), so that when I click the button, the application can retrieve the string value of the key, analyse and extract integer values from two...  I've done this work - BUT the button actually displays the string containing the numbers!  Is there a way to "hide" this information contained in the button?

  (2) alternative... Is it possible to include columns 'hidden' in a table that can contain information - but these columns are not displayed.  For example, my table is currently 8 visible columns.  Could I somehow add a column for file identification number and a column for search-map and have these columns be hidden from view (but still accessible to the application)?  I don't see a way to do this, but I'm still very inexperienced using tables in L/CVI.

  Or you guys maybe you know a better way to do...

  Thank you very much

  Harv

  Regarding your question 2, although it is probably replaced by my previous post, don't forget that a table can have more columns than those displayed on the screen.

  You can configure your table to have 10 columns, but only 8 shown (button ' size/scroll options' in table in the IUR editor properties); given that you can hide the horizontal scroll bar, even in this case you can store information in the table that are not accessible to the user.

• How to use FTP Client and manage the table in BB with JDE

  I'm a newbie to BB development. I have an application in mind, it is a simple ordering application. BB users can send order information to an ftp server. The BB will have some paintings as a customer table and the Order Details table (the two have only a few records). Since cannot use the Services of SDM BlackBerry because the license fees. I'll use JDE to develop the application.  Here are my questions:

  1. What is the best way to manage the tables (read/write)?  RMS, or embedded database (which one?)
  2. is there any ftp client in JDE, api can be used to send data to an ftp server?

  Thanks for help.
  PJ

  The exact figures for RMS sizes are available in this article:

  What is - size restrictions when you use the RecordStore
  Article number: DB-00656
  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800724/What_Is...

  So that your information is correct, in 4.6 or later, the per application limit went up to 512 KB.  I don't know if there is a limit on a single record in a record store. We must be careful of the terminology here, it's RecordStore or RMS - is not in BlackBerry terms anyway, PersistentStore (see next).

  The BlackBerry offers two other ways to store data.

  The first and most commonly used are called PersistentStore, and it is an a storage mechanism for objects, I am not aware of any restrictions, other than the memory of the device, about the size of an object that can be stored in PersistentStore.  The advantage with PersistentStore, is that you just persist an object helps you, rather than having to convert it to bytes (serialize) before storing and converting new (him deserialize) after reading it back.

  The second way is to write data using the FileConnection API, and you can for example use this to write data to the SD card in the device.

  EFF and PersistentStore use the flash memory in the device.  You don't have to manage yourself.  You treat all that identical objects, the BlackBerry operating system very cleverly manages to bring your items in RAM and save them in Flash, so you don't have to worry about the type of storage you have.

  I hope this helps.

• video clips freezing when played in the table of Storyboard

  I use windows 2.6 Director. I converted my files .mov in avi files and imported into movie maker. They play very well until I drag them onto the table of Storyboard and while they freeze when they should play (audio seems to continue even though). I tried to download the windows codecs. What should I do to make a film to work?

  I use windows 2.6 Director. I converted my files .mov in avi files and imported into movie maker. They play very well until I drag them onto the table of Storyboard and while they freeze when they should play (audio seems to continue even though). I tried to download the windows codecs. What should I do to make a film to work?

  ==========================================
  First, there is a version of Vista Movie Maker 6 which
  runs on Windows 7... It's a better program for 2.6.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Vista Windows Movie Maker Installer for Windows 7
  http://noeld.com/programs.asp?cat=video#wmminst

  Regarding the. MOV files, convert the. WMV format
  should produce a better result in Movie Maker.

  There are many converters to retail and freeware
  available on the net... some are better than others.

  The following freeware converter is an example.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)
  (* Read * all * the installation screens... it)
  may be a few items you want to unmark *)

• ODI-26174 error when try to turn the Table in the model

  Hello

  I got a strange error when I try to turn the table in the model.

  I created the new user (with subsidies), I created the new physics and logic diagram.

  I created new model also. When I try to reverse table I ODI-26174 database connection is not available error

  I tried to measure option using RKM reverse .it. But why it has not been reversed by using option Standart?

  ava.sql.SQLException: i/o error: the network adapter could not establish the connection

  at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.doGetConnection(LoginTimeoutDatasourceAdapter.java:133)

  at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.getConnection(LoginTimeoutDatasourceAdapter.java:62)

  at oracle.odi.core.datasource.dwgobject.support.OnConnectOnDisconnectDataSourceAdapter.getConnection(OnConnectOnDisconnectDataSourceAdapter.java:74)

  at com.sunopsis.sql.SnpsConnection.testConnection(SnpsConnection.java:1128)

  Any Solution for this?

  Concerning

  AETL

  Hi aetl,.

  If you open the database server in the physical topology and click 'test connection', is it effective?

  If this isn't the case, you must set your connection details, maybe check that the tnsnames.ora is correct and that the network access is ok (including firewalls,...). You can try a tnsping on your database.

  Kind regards

  JeromeFr

• Update the table in a jsf page

  Hello experts

  I have a problem with refreshing table:

  I have an entity named "folder" of this entity, I select a few 'folder' special conditions:

  to exple table in the page 'A' shows all records where State = 'ongoing'

  and table b in the 'B' Page shows all the folder where State = 'TEMP '.

  the isssue here is when I change the State of a row in the second table, tha means when I select a line and State = 'in progress' with a merge feature, it has not appeare in the first tabe,

  
  

  I'm tempted to refresh it with iteratorbinding.excutequery () it works for the temp table record that designates the modified line is diseappeard but not there not appeare in the first table.

  
  

  I can't add a partial trigger table coz two are not on the same page, and I can't use the iterator to the first page (EXCEPTION of POINTER NULL)...

  
  

  I use jdeveloper 12.1.3.0.0, ejb and jpa and jsf pages for interaction with users and oracle for the database db11g
  

  Why don't you use a workflow?

  To allow the other iterator, you can drag from the data command and drop it onto the second page in the table. Once the table is visible on the second page, switch to source mode and remove the table tag. This will remove the table but leave the iterator binding available on page 2.

  Now, you can run the iterator again two page and when you navigate to a page it should show changes.

  However, this approach comes with certain costs. Add the iterator is available on page two, it is executed when you enter page two, even if you use it on the page. This could cause a delay when rendered, depending on the size of the data.

  Using the task flow will certainly be the best choice!

  Timo