Notes to the tables

We have started using notes in the ID - & can't seem to post them in the tables. Is not a function?

Oops, hit send too early. Notes are available in the tables from CS4.

Bob

Tags: InDesign

Similar Questions

Why the SD-R6112 drive will not read the table of contents through DVD Decrypter?

Why the hell used my reading of DVD-ROM/R/RW Toshiba SD-R6112 the TOC through DVD Decrypter?
She normally does! I use nero, Decrypter, DVD Shrink, and even Windows medai Player 9 series.

It was working fine 2 days ago now pfft, will not work. Everything in the settings of the device checked, said everything works properly without conflicts. I unloaded the driver and rebooted then loaded it, same problem. I tried a disk driver that came with my laptop and is responsible, it is very good, so I take this CD work correctly, but won't load DVD. With DVD Decrypter, it says: could not retrieve the table of contents.

There must be a solution!

Hello

Are you trying to make illegal copies of DVD? ;)

Data export of the Disqualification to the table in step should not truncate the table.

Hello friends,
Please find blow my requirement and do the necessary.
We export data cleaned to staging tables, whenever we export data, Disqualification truncates the table and inserts the new data sets into this table.
My requirement is instead of truncating the table before inserting the data in it, Disqualification must add these records, should not truncate the table.
Please let me know how to configure this in OEDQ, your help is appreciated.
Thank you, Prasad

Could not be easier. Double-click the task to export in your work and change the mode append.

will not display the table correctly; displays OK in Internet explore all versions

Table will not correctly display in Firefox; Removes the first section of < b >... < /tr >, move the section 2 of < b >... < /tr > right. The table shows correctly in all versions of IE.

You should never use several hyphens in a comment.
Firefox will toggle the status comment after that each two hyphens (-), if you need a lot of luck with this many as in this case:
```

```
Firefox treats the code that follows as comment until the next two "-" found in the next section. You can see through view > Source of Page as green comment.
```

```
You're code here shows a < td > additional vacuum that causes a column empty to appear to the left, if that's what you mean.
```

<TR align="center">
<td>
<td>
<Font color="#ff00cc">
<h2>Charleston</h2></font></td>
<td>
<Font color="#ff00cc">
<h2>Savannah</h2></font></td>
<td>
<Font color="#ff00cc">
<h2>Recommendation</H2></font>
</TD>
</TR>
<td>
```
You can use the DOM Inspector to examine the code.
- DOM Inspector: https://addons.mozilla.org/firefox/addon/6622

Visible data in a 2D table but not in the Table connected control

In the attached drawing, you will see that I take control of Table in table form, change the items to help replace a subset of table and then return the resulting table in the Table control.

I can see my data in "Table of output" and a probe on this thread, but my Table control is empty. The Table control is 10 columns of 50 lines.

Can someone tell me why there is no data for the Table control?

Please do not ask I post the VI because it is big, ugly and not mine to post.

I can't believe.

I couldn't see the data because it was out-of-frame. My Control Panel flashed down a 30 line window and my data was in the first line only.

Database will return no error, but does not delete the table

Hello

I'm developing an application that uses a database (SQLite). I would like to delete and re-create a table in the database (this table is the kind of a cache).

When I run the following code, I get no error but chrome / ripple-> resources-> "Web SQL", I still see the old structure of the table.

Do you have any idea what the problem might be or how I can solve it?

       db.transaction(
            function (tx) {
                tx.executeSql('DROP TABLE IF EXISTS users',[],function (tx, res) {}, function (tx, err) {alert(err.message)});
                tx.executeSql('CREATE TABLE users (firstname, lastname, phonenumber, emailadd, company)',[],function (tx, res) {}, function (tx, err) {alert(err.message)});
                for (var i = 0; i < oPerson.length; i++) {
                    tx.executeSql('INSERT INTO users (firstname, lastname, phonenumber, emailadd, company) VALUES ("' + oPerson[i].Firstname + '", "' + oPerson[i].Lastname + '", "' + oPerson[i].Phonenumber + '", "' + '", "' + oPerson[i].Emailadd + '", "' + oPerson[i].Company + '")');
                    iUsers = iUsers + 1;
                }
            }

        );

Thank you very much

Roberto.

Hello Roberto,

There was a problem with your INSERT INTO string where you have provided additional value which did not exist as a database column. Change

 oPerson[i].Phonenumber + '", "' + '", "' + oPerson[i].Emailadd

 oPerson[i].Phonenumber + '", "' +  oPerson[i].Emailadd

Here's a complete code that must run:

var db = openDatabase('mydb', '2.0', 'Test DB', 4 * 1024 * 1024);
var iUsers = 0;
var oPerson = [{Firstname: 'Joe',
    Lastname: 'Smith',
    Phonenumber: '1800CALLJOE',
    emailadd: '[email protected]',
    Company: 'Photojam'},
    {Firstname: 'Jack',
    Lastname: 'Smith',
    Phonenumber: '1800JACK999',
    emailadd: '[email protected]',
    Company: 'Photojam'}
    ];
db.transaction(
            function (tx) {
                tx.executeSql('DROP TABLE IF EXISTS users',[],function (tx, res) {}, function (tx, err) {alert(err.message)});
                tx.executeSql('CREATE TABLE users (firstname, lastname, phonenumber, emailadd, company)',[],function (tx, res) {}, function (tx, err) {alert(err.message)});
                for (var i = 0; i < oPerson.length; i++) {
                    tx.executeSql('INSERT INTO users (firstname, lastname, phonenumber, emailadd, company) VALUES ("' + oPerson[i].Firstname + '", "' + oPerson[i].Lastname + '", "' + oPerson[i].Phonenumber + '", "' + oPerson[i].Emailadd + '", "' + oPerson[i].Company + '")');
                    iUsers = iUsers + 1;
                }
            }

        );

Let me know if there are problems!

See you soon,.

James

Table of contents - do not enter the table header overflow

Hey,.
In my table of contents, I listed two styles:
1 table of contents Title Page
2 - the ToC table header
I also have my table set up correctly - headers, so when a Table flows to a second page - table headers appear in this second page as it should. The tables are large - and not the way to avoid overflow. I think that the principle is called "Text Threading" - but it also works with the tables.
In the majority of cases - the implementation works perfectly.
HOWEVER when the table flows to a second page - TocTable header does not appear in the Table of contents regenerated.
For example, the table of contents looks like this:
Electric Page 6
Machine X - Y - Z Page 6
Electric Page 7
Electric Page 8
When it SHOULD look like this:
Electric Page 6
Machine X - Y - Z Page 6
Electric Page 7
Machine X - Y - Z Page 7
Electric Page 8
Machine X - Y - Z Page 8
Is this possible? I have looked at all - and cannot find all the options.
Thank you!

Clarify: X-Y-Z Machine is the title of the table, and he appears in a header row (repetition) over a several page table? And you want each occurrence of table header appear in the table of contents and not only the first occurrence?

I don't think it will work this way. Header lines is modified on the first page of a table: other pages just repeat the info, but it is not accessible. It would work if you put the title of table above the table (not inside) and it repeated manually at the top of the pages. It's more work, but it will get the desired result. You mentioned that it doesn't happen that often, so maybe that's a doable "workflow" for you.

That said, most of the TOCs brings you to the first page of a chapter, section, paragraph, and table and do not repeat the entry when the chapter, section, paragraph or a table contains more than one page. If I have sought to your table of contents and wanted to see the section on electricity, I have to stop and wonder what page to go to the first. I think that eventually, I would choose the premiera.

DAC does not synchronize the tables of Informatica

Hello
I'm new to OBIEE although I experience Informatica. I created a mapping and the workflow. DAC, I created the new folder logical and physical. Creates a new task and provided the name of the task and logical record and other details. When I try to "Synchronize the tasks", I get a message of success with the names of the tables as expected. The DAC journal file is below.
-The Sync task has begun-
Requested workflow is exported to C:\DAC\dac\repository\taskSync\.
New source/target tables are inserted in the DAC metadata.
Exported xml files are removed from C:\DAC\dac\repository\taskSync.
-Sync task completed.
It is not question of DAC with Informatica repository communication or integration service as connection test results are ok.
In Windows command prompt, pmcmd and pmrep works fine.
Can you please help me out here, as I'm stuck here and not able to go further.
I checked the DAC server log. It shows a serious error. I copy the same thing here.
12 INFO Fri May 02 09:46:09 EDT 2014 reading repository properties
INFO 13 Fri May 02 09:46:09 EDT 2014 reading repository properties
14 INFO Fri May 02 09:46:10 EDT 2014 reading execution types
15 INFO executors of sync Fri May 02 09:46:10 EDT 2014
16 SEVERE Fri May 02 09:46:10 EDT 2014 audit the localhost with the values defined in the DAC repository!
INFO 17 Fri May 02 09:46:10 EDT 2014 add server name: localhost
INFO 18 Fri May 02 09:46:10 EDT 2014 adding replacing servername: unspecified
19 SEVERE Fri May 02 09:46:12 EDT 2014 Unknown host Unspecified. Error message: unspecified
Fri May 02 20 INFO 09:46:12 EDT 2014 bound to port 3141
INFO 21 Fri May 02 09:46:12 EDT 2014 creation ClientMessage dispatcher with 2 worker threads
INFO 22 Fri May 02 09:46:12 EDT 2014 no competition, only ETL can work both and it will run in the same process space.
NEWS 23 Fri May 02 09:46:12 EDT 2014 SERVER_NETWORK_MESSAGE: Created ClientMessage dispatcher with 2 worker threads
Fri may 02 24 INFO 09:46:12 EDT 2014 com.siebel.etl.net.ClientMessageDispatcher registered with HeartBeatManager
Thanks for your help,
Ananth

You can ignore any additional flat file as the source for the task in CAD.

Make sure what you do know about informatica

Pls don't change the original message! If you want to add anything, you can go to meet.

I think that you are ready to go to close

Does not receive the table name in the list of schema objects creating EO

Hello
IAM does not have my name of the table custom in the list of schema objects during the creation of EO.
I created a custom table and I need to use this table looks for creation EO,
But while creating the EO, I'm not able to find the table in the schema object list.
in the connection database, these tables are present, but only in this window (window of creation of Eo) these tables do not come
can someone please help how to solve this problem.

Hello

I found the solution

in business components that there is another database link that I've changed now, it works fine now

Drag the titles not appearing is not in the table of contents - 7 Captivate

Is someone can you please tell me why my slide titles will not be displayed in my project? He says only: "Slide 1", "Slide 5", etc... ". I have not worked with the table of contents a lot so this is all new to me.

Table of contents will show Slide labels, no titles on slides. You can change them in the table of contents itself, but perhaps it is easier to score the slides.

After marking, you need to click the Refresh button on the table of contents

The columns appear in the data store that are not in the table
Hi guru,.

I have a table that I built in Oracle and added to ODI by refactoring it, but when I add it as a source to my interface, it contains columns that are not physically in the Oracle table that I can look into a TOAD. I dropped the prior of the table deleted-> interface-> reverse engineering table but I get an additional column. Y at - it an explanation for that? I have the table listed in a stored procedure - should I delete this step as well before reverse engineering, or is something else.

Thanks in advance.

Mike
Yes. There is a possible explanation. How do you are engineering it? If you use Oracle RKM, you may be using a customized version of this KM which adds a column of your table name...

JTable with custom column model and model table does not display the table header

Hello

I create a JTable with a custom table model and a custom column template. However the table header is not displayed (Yes, it's in a get). I have narrowed the problem down in one compilable example:

Thanks for your help.

import javax.swing.*;
import javax.swing.table.*;

public class Test1 extends JFrame
{
     public static void main(String args[])
     {
          JTable table;
          TableColumnModel colModel=createTestColumnModel();
          TestTableModel tableModel=new TestTableModel();
          Test1 frame=new Test1();

          table=new JTable(tableModel, colModel);
          frame.getContentPane().add(new JScrollPane(table));

          frame.setSize(200,200);
          frame.setVisible(true);
     }

     private static DefaultTableColumnModel createTestColumnModel()
     {
          DefaultTableColumnModel columnModel=new DefaultTableColumnModel();
          columnModel.addColumn(new TableColumn(0));

          return columnModel;
     }

     static class TestTableModel extends AbstractTableModel
     {
          public int getColumnCount()
          {
               return 1;
          }

          public Class<?> getColumnClass(int columnIndex)
          {
               return String.class;
          }

          public String getColumnName(int column)
          {
               return "col";
          }

          public int getRowCount()
          {
               return 1;
          }

          public Object getValueAt(int row, int col)
          {
               return "test";
          }

          public void setValueAt(Object aValue, int rowIndex, int columnIndex)
          {
          }
     }
}

Published by: 802416 on October 14, 2010 04:29
added

See http://download.oracle.com/javase/6/docs/api/javax/swing/table/TableColumn.html#setHeaderValue (java.lang.Object)
When the TableColumn is created, the default headerValue is null
So the header ends up rendered empty label (probably of size 0 if the JTable calculates its size of header based on the size of the default rendering tool).

It worked:

     private static DefaultTableColumnModel createTestColumnModel()
     {
          DefaultTableColumnModel columnModel=new DefaultTableColumnModel();
                TableColumn col = new TableColumn(0);
                col.setHeaderValue("Header Title");
          columnModel.addColumn(col);
                return columnModel;
     }

Published by: jduprez on October 14, 2010 14:09
Beaten by a fraction of a second!

Published by: jduprez on October 14, 2010 14:10
OK, by a split of 17 minutes, specifically: o)

The cursor does not not in the tables in IE
I must say I've only worked with dreamweaver about a month, but has created the following site: keep the promise the question I seem to have is that a: hover in IE7 does not show the change from blue to yellow, nor does show blink inside tables with links. My navigation bars are at the top and left and they are tables with links. They work fine in firefox but IE7 is a go. Color change works outside of the tables and blink is also working on the outside, but it is not a complete snap him disappears just from end of line to the overview. I'm also just learning css so I know it's something to do with that prolly. Any help would be cool. Thank you
All your links change color bubble, until you click on them.
Once they are visited, they change more.
Clear your cache and you will see this.

It's because your link order is incorrect.
Should be the link, visited, hover, active. Love hate

So change your linkmagic CSS style sheet to:

a: link {}
color: #99CCFF;
line-height: normal;
text-decoration: underline;
}
a: visited {}
color: #99CCFF;
text-decoration: underline;
}
a: hover {}
color: #FFCC00;
text-decoration: blink;
}
a: active {}
color: #99CCFF;
text-decoration: underline;
}

Take care
Tim

"ancientone567" wrote in message
News:fs41uu$3GP$1@forums. Macromedia.com...
> The main problem is that my IE7 links that are in the tables don't change color
> overview.

I do not see the table of contents, Index, search & amp; Glossary when the call for help on a topic
Does anyone else have this problem? I use webhelp with contextual sensitivity, and I appeal to the table of contents, Index, search, and glossary to display. If I go to the welcome home page, they are exposed. But when we ask for help on a particular page, these areas are not shown, but they can be opened using the view link. I much prefer to see the exposed left pane, rather that ask the user to click on this link. How can I do this?

Robin Valk
Hi Robin.
See this link using the appeal of the CSH Webhelp output.

Automatic line processing (ARP) is not updated the table
All pages update tables appropriate with the exception of the Page 7 (gross revenue). "While it is said ' gross revenues registered" after the success message, the lines is not being updated. I can't understand why. I checked the source and it is OK. I checked that the key of the table is a page element (P7_FIRM_ID) and not a component of demand (F103_FIRM_ID). I also checked to make sure that the P7_FIRM_ID item_id is computated correctly and it is.

Can someone please help. Thank you.

RGWORK workspace
Application 44288
Username TESTER
Password TEST123

Run the application from Page 33 instead of Page 1 and choose the small business.

Thanks again,

Robert
Article P7_FIRM_ID of the page has value Source:

GR_FIRM_ID

This is incorrect.

Scott

Notes to the tables

Similar Questions

Maybe you are looking for