Availability Tecra R940-S9440 for the France

Similar Questions

• Photosmart 7510 setup for the France

  Hi all

  I bought a few months ago an all in one photosmart printer 7510 in the USA.

  I'm back in France for a few months, and I had to change the computer last week... and surprise... I can find the print for the 7510 cartridges in detail... but it seems there is a zoning configuration and I can't use a french :-(print cartridges

  I heard there is a configuration change.

  Is someone can help me change this configuration?

  Thanks in advance

  Contact HP support to allow a representative of HP talk you through the changes required for a change of region.

  Contact support HP in France

  This will allow your printer to accept cartridges purchased in another region in which it was purchased. You will need to perform the same procedure with a representative when you retuirn to the States and the purachse of new cartridges. Free changes of the region for your printer.

• Tecra A9 - software for the fingerprint sensor error

  My laptop is less than 3 weeks old and the fingerprint sensor has stopped working.
  I just get an error message: can not find the fingerprint sensor device, 0xe7210005 error code.
  can anyone help?

  Hello

  you don't have many options. But I can try to give you some tips:

  1. go into the Device Manager and search for the device of fingerprints, so if it s present, uninstall it and after a reboot it should reinstall itself.

  2. go on Toshiba drivers download site and download the latest drivers for this device. Install the driver and check if it work s

  3. If really nothing done then you should recover your machine with the media shipped (or HARD drive recovery)

  4. the last resort, if all fails, is to contact the nearest [ASP | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871] in your country and ask them a hardware health check and repair.

  Good luck

  Greetings

• How to get a list of all available updates and dependencies for the MS products

  We are currently working on a patch report (compliance policies).
  We need to scan all workstations for the patches installed (already DONE!).
  Now we need to get a XML / List / or something telling us all the patches to release MS, affected software and dependence.
  Any help?

  See if this sugesstion can help you to:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/6da1bc16-9919-4762-85D5-95dee3aa15fd

  Take a look at this link and see if it helps-

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/a75f8d76-8689-4661-A546-90b555d80c9d>

  Windows XP security updates and patches for 2010

  http://www.softwarepatch.com/Windows/Windows-XP-security-updates-2010.html>

  03/23 / 1107:12: 05:00

• Available attribute schema ldap for the OAM User Manager

  Hi people,
  
  I need view the attributes of ldap multi-value (no objectClass) schema in the OAM User Manager. Somehow, only a handful of attributes are visible. When I go in the Console System identity, User Configuration Manager, tabs, users, change attributes, the attribute that I need isn't on the list.
  
  Any help is appreciated.
  Thank you, novel

  Hi Roman,

  Not quite, the method would be:

  1. create the new object defined by the user (such as auxiliary)
  2. only add additional attributes (besides the ones I see already) I need to display in the user for it to a schema Manager
  2.5 identity restart them
  3. in common Config OAM, add this object (hopefully)
  4 Add attributes to control panel users

  For step 1, I don't know how to create an auxiliary object class in the Sun Java Console (I'm not saying that this is not possible, it's just that I don't know the method). Another method is to create an objectclass to an ldif (which also gives you a permanent record of the objectclass) and you can use the files identity, oblix, data, common identity as a model for this server directory. For example, consider the file iPlanet_oblix_schema_add.ldif and look for the oblixorgperson entrance, which looks like:

  DN: cn = schema
  ChangeType: modify
  Add: identifiers
  identifiers: (1.3.6.1.4.1.3831.0.1.13 NAME 'oblixorgperson' DESC 'Oracle Access Manager defined objectclass' SUP top AUXILIARY MAY (obuiconfig $ oblocationdn $ obrectangle $ obpsftid $ obdirectreports $ obindirectmanager $ obuseraccountcontrol $ obobjectclass $ obver $ oboutofofficeindicator))

  You can create your own auxiliary objectclass use this as a template.

  Hope it makes sense.
  Colin

• Tecra S11: Detection for the Toshiba tool: your product is not found error

  Hello

  I use Toshiba detection tool quickly find drivers for my tecra, but since a month now, the page gives this error
  Your product is not found

  It is not a problem to choose my phone in the new drop-down list, but it was uncomfortable, when it worked.
  Is there a solution for this problem?

  What tool do you mean exactly; Panel display or Tempro?

  As far as I know there is a new version of Tempro reinstall it and check how it works

  PS: since my knowledge only European Toshiba notebook series can be detected by Tempro

• Tecra R940 with Windows 7 SSD boot failure

  My company bought laptop computers Tecra R940 and replace the HDD with Kingston SSDNow v + 200 V + 120 GB SSD drives. On a test after installing the SSD device, the laptop was rebuilt with our brand image (Windows 7 x 64) that has successfully completed.

  Update post however a number of issues is apparent:

  1 occasionally during a restart, the laptop will display and then hang at 'starting windows' screen for the Windows logo animation appear and with the light of the hard drive continuously. After a period of time that a Windows recovery is attempted and, possibly, a reported error:

  Status: 0xc00000e9
  Info: An unexpected i/o error has occurred

  This problem will not occur at every startup, but once every 2 or 3.

  2. the following error message is logged in the Windows system log

  Source: ATAPI
  Event ID: 11
  Description: The driver detected an error in the controller on \Device\Ide\IdePort0

  I have tried the following to resolve the problem:

  1. update the R940 BIOS to the latest available (6.40).
  2. has confirmed that the BIOS SATA Controller is set to AHCI.
  3. not confirmed there are no available SSD drive firmware update.
  4. install the latest Intel Rapid Storage Technology driver of Toshiba (11.0.0.1032).
  5 tried different SSD. Same errors identified, so not a faulty SSD.
  6 tried the SSD in a Toshiba Portege R930. In this case the mistakes above are not apparent.
  7 reinstall the original HARD disk. In this case the mistakes above are not apparent.
  8A confirmed a 2nd unit (with installed SSD) logs the same event ID 11.

  My tests left me at a point where I think that there is something bad at the end of R940 with a hardware or software that does not like the SSD.

  If someone has solved a similar problem or have thoughts on fixing this?

  Thank you in advance.

  Specific installation of corporate images are always full of risks, and quite often, there are different problems. As much as I know in the past Toshiba has created special images of recovery for some companies who ordered a specific number of booklets for employees.

  On this virtual path, it is not easy to say what the problem is here, but I would like to know if you have tried to install own OS Win7 using the original disk of Microsoft.

  I mean that it must be possible to install Win7 clean on the new laptop models. I tested it on my U940 satellite and it works well. I had some trouble with Toshiba specific stuff (tools and utilities), but it was not so important and work with Win7 was possible in any case.

• Tecra A4: Cannot set the resolution of 1280 x 800

  Hi all.

  I have a Tecra A4, and for the last 2 days I am trying set up the screen at native resolution of 1280 x 800, without sucssess.

  I try a lot of things, like updating drivers, use the restoration of the system, the value 'stretch' in the BIOS, etc, but this resolution do not appear on the display settings (I use XP SP2). I've only 800 x 600 and 1024 x 768.

  In any of these resolutions, a wide black border appear to the right of the screen. A small border appears on the bottom, too.

  Please, how can I solve this problem? I don't want to use the Toshiba restore, some programs I use are very difficult to find and install.

  Thank you.

  You cannot set this resolution if this resolution of 1280 x 800 is not part of the display driver.
  The graphics card driver contains all available resolutions and if one is missing, I mean not rated, it s not able to select

  Nothing to buddy

• Tecra R940 - 1 H does support external resolution 2560 x 1440

  Hello

  I use a laptop TECRA R940-1HP
  I want to buy professional instructor Phillip 272P4QPJKEB/00, with a resolution of 2560 x 1440.
  Please write to me.

  My laptop can support such a resolution?

  Support of external resolution depends on the graphics card that is built into the laptop.

  As I know the Tecra R940-1HP supports the chip Intel HD Graphics 4000.

  To my knowledge, this chip Intel HD 4000 supports max resolution of 2560 x 1600/32 bit via Display Port.

  I guess more details on Intel's own graphic chip found on the Intel page.

  Welcome them

• selector of color and the list of fonts in the options for the widget?

  Is it possible to add a color to the options for the widget selector? How about access to the list of fonts of the site?

  The new version of Muse, available today, has support for the color picker and the file picker. Still no list of fonts.

  MuCow Documentation

• [Consolidation-locked] Support for the Nikon D600 RAW?

  When the update of Adobe RAW will build for the Nikon D600?

  Title of the message was edited by: Brett N

  Lightroom and Camera Raw 7.2 4.2 (11 items) are currently available and provide support for the Nikon D600.

  Go to help > (check) updates installed.

  Please visit: http://forums.adobe.com/message/4785056

• How to prevent "a request for the item is now underway."

  Hello guys,.

  Im getting this error very often, is there a solution to this?

  Error: Requested Item is not available. A request for the item is now underway.
  at mx.data::ConcreteDataService/resolveReference() [C:\depot\DataServices\trunk\frameworks\pr ojects\data\src\mx\data\ConcreteDataService.as:2203]
  at mx.data.utils::Managed$/getProperty() [C:\depot\DataServices\trunk\frameworks\projects\dat a\src\mx\data\utils\Managed.as:183]
  to sgrh::_Super_Empresa/actividade() [C:\wlcds\sgrh\src\sgrh\_Super_Empresa.as:198] get
  at mx.data.utils::Managed$/internalCompare() [C:\depot\DataServices\trunk\frameworks\projects \data\src\mx\data\utils\Managed.as:648]
  at mx.data.utils::Managed$/arrayCompare() [C:\depot\DataServices\trunk\frameworks\projects\da ta\src\mx\data\utils\Managed.as:696]
  at mx.data.utils::Managed$/internalCompare() [C:\depot\DataServices\trunk\frameworks\projects \data\src\mx\data\utils\Managed.as:608]
  at mx.data.utils::Managed$/ http://www.adobe.com/2006/Flex/MX/Internal: Compare () [C:\depot\DataServices\trunk\framewor ks\projects\data\src\mx\data\utils\Managed.as:522]
  to mx.data::ConcreteDataService / http://www.Adobe.com/2006/Flex/MX/internal:getDataListWithFillParams ([C:\depot\DataServi ces\trunk\frameworks\projects\data\src\mx\data\ConcreteDataService.as:3751])
  at mx.data::ConcreteDataService/internalFill() [C:\depot\DataServices\trunk\frameworks\projec ts\data\src\mx\data\ConcreteDataService.as:7178]
  function / < anonymous > () [C:\depot\DataServices\trunk\frameworks\projects\data\src\mx\data\C oncreteDataService.as:1317]
  at mx.data::ConcreteDataService/fill() [C:\depot\DataServices\trunk\frameworks\projects\data\ src\mx\data\ConcreteDataService.as:1336]
  at mx.data::DataManager/fill() [C:\depot\DataServices\trunk\frameworks\projects\data\src\mx\d ata\DataManager.as:1560]
  to _Super_FuncionarioService / getByEmpresa () [C:\wlcds\sgrh\src\sgrh\_Super_FuncionarioService .as:341]
  at mz.mysoft.sgrh.telas::ListaFuncionarios/reset_clickHandler() [C:\wlcds\sgrh\src\mz\mysoft\ sgrh\telas\ListaFuncionarios.mxml:58]
  at mz.mysoft.sgrh.telas::ListaFuncionarios/__reset_click() [C:\wlcds\sgrh\src\mz\mysoft\sgrh\ telas\ListaFuncionarios.mxml:84]

  Kind regards

  Marie Pierre

  Errors of ItemPending means that the customer of data services will look for an item that has been marked as lazy or load on request.  This should be an event waited and managed by the code of any ACE that touches a collection of table who has lazy elements in it.  Eg the AsyncListView in Flex component automatically manages these errors, as the DataGrig Halo (mx:DataGrid).

  See the documentation on the mistakes of ItemPending here: http://help.adobe.com/en_US/LiveCycleDataServicesES/3.1/Developing/WSc3ff6d0ea77859461172e 0811f00f6f6de - 7ffcUpdate.html #WSc3ff6d0ea77859461172e0811f00f7045b-7f4aUpdate

  Tom

• How to replace the optical drive on the Tecra R940

  Hi all.
  I search everywhere trying to see how to replace the ODD (optical disc drive) of a laptop Toshiba Tecra R940? pt439a-00n003
  its supposed to be easy, but can't get out.

  Anyone know where I can get some info on how to make the?

  Thanks for reading!

  I think that there are just one or two screws holding it on the basic coverage, it then behind the scenes.

• How do I update the BIOS on the Tecra R940?

  Are there instructions for BIOS update for my Tecra R940/Win7Pro/64 bit?
  Thank you
  AB - Oz

  On the BIOS Toshiba download page you can download the version of WIN. This means once downloaded BIOS, you must run it under Windows running as all other applications.
  By the way: is there a reason to update the BIOS? Have you noticed any problems with your machine?

• Tecra R940 - 1 hr: what happens to work out of the box with Linux?

  I'm considering buying a laptop Tecra R940 - 1 hr.
  I'm going to use it with linux (ubuntu) system.

  What happens to work out of the box?
  Should I expect any problems with the display/network/wifi/sound?
  What about camera, usb 3.0 and bt?

  What is possible to work? Suspend? Function keys? Fingerprint reader? SD reader?

  What's not to work?

  I run Ubuntu Studio (12.04) on a Tecra A11-ST3504, and everything works perfectly.

  However, your computer probably has the latest UEFI instead of the BIOS, and this causes problems for some with start-up and installation.

  If the live system starts and runs, I'd go for it.

  I'll put the admins the trouble to make their usual warning: "of course, Linux is not supported by Toshiba."

  Enjoy!