average error message

Similar Questions

• What means the error message: average 213:19?

  What means the error message 213:19?  How do fix you it?

  Hi DMAADOBENAME,

  213:19 is a license error. Please see the steps listed in the KB: http://helpx.adobe.com/acrobat/kb/error-213-19-licensing-acrobat.html / http://helpx.adobe.com/photoshop-elements/kb/licensing-problem.html .

  Kind regards

  Romit Sinha

• Restart fails. Error message: The Finder cannot quit because some operations are still ongoing.

  Unable to shut down or restart. Dialog box shows "The Finder cannot quit because some operations are still ongoing." I'm unable to find it than those who are. Ran disk utility and tried again with the same result. Sure would appreciate your help!

  My MacBook is a 13-inch aluminum, late 2008, Running OS X 10.11.3

  System report:

  Presentation of the material:

  Model name: MacBook

  Model ID: MacBook5, 1

  Processor name: Intel Core 2 Duo

  Processor speed: 2.4 GHz

  Number of processors: 1

  Total number of cores: 2

  L2 Cache: 3 MB

  Memory: 4 GB

  Bus speed: 1.07 GHz

  Boot ROM version: MB51.007D.B03

  Version of the SCM (System): 1.40f2

  Serial number (System): W8919BPH8QT

  Material UUID: 64CA23AE-66AA-510A-9A68-95E35F1AC9F5

  Motion sensor sudden:

  Status: enabled

  Sudden

  At ran Etrecheck, with the report as follows:

  EtreCheck version: 2.9.3 (253)

  Report generated 2016-02-11 14:08:26

  Download EtreCheck from http://etrecheck.com

  Duration 09:27

  Performance: Below average

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Click on the link [check files] help with unknown files.

  Could not complete the following internal tasks:

  / usr/sbin/system_profiler - xml SPUSBDataType

  Problem: Another problem

  Description:

  Unable to restart or shut down. Error message indicates the operation is running, but I don't know what it is.

  Hardware Information: ⓘ

  MacBook (13-inch, aluminum, late 2008)

  [Data sheet] - [User Guide] - [Warranty & Service]

  MacBook - model: MacBook5, 1

  1 2.4 GHz Intel Core 2 Duo CPU: 2 strands

  4 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1067 MHz

  0/DIMM1 BANK

  OK 2 GB DDR3 1067 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 161 - SN = W024902CY6GOA

  Video information: ⓘ

  NVIDIA GeForce 9400M - VRAM: 256 MB

  Color LCD 1280 x 800

  Software: ⓘ

  OS X El Capitan 10.11.3 (15 d 21) - time since started: about 7 days

  Disc information: ⓘ

  TOSHIBA MK2553GSX disk0: (250,06 GB) (rotation)

  EFI (disk0s1) : 210 MB

  Macintosh HD (disk0s2) /: 249,20 go-go (174,22 free)

  HD (disk0s3) [recovery] recovery: 650 MB

  MATSHITADVD-R UJ-868)

  Configuration files: ⓘ

  / etc/hosts - Count: 1

  Guardian: ⓘ

  Mac App Store and identified developers

  Unknown files: ⓘ

  / Library/LaunchDaemons/com. Starfield.backupservice.plist

  ~/Library/LaunchAgents/com. LogMeIn.Cubby.Updater.plist

  ~/Library/LaunchAgents/com. MLBAM.nexdef.plist

  ~/Library/LaunchAgents/join.me.Launcher.update.PerUser.plist

  4 unknown files found. [Check files]

  Kernel extensions: ⓘ

  /Applications/transmit.app

  com.panic.TransmitDisk.transmitdiskfs [no charge] (4.0.0 - 10.5 SDK) [Support]

  / Library/Extensions

  com.seagate.driver.PowSecDriverCore [no charge] (5.2.7 - 10.4 SDK) [Support]

  [loading] com.squirrels.airparrot.framebuffer (5 - 10.10 SDK) [Support]

  [loading] com.squirrels.driver.AirParrotSpeakers (1.8-10.8 SDK) [Support]

  / Library/Extensions/Seagate storage Driver.kext/Contents/PlugIns

  com.seagate.driver.PowSecLeafDriver_10_4 [no charge] (5.2.7 - 10.4 SDK) [Support]

  com.seagate.driver.PowSecLeafDriver_10_5 [no charge] (5.2.7 - 10.5 SDK) [Support]

  com.seagate.driver.SeagateDriveIcons [no charge] (5.2.7 - 10.4 SDK) [Support]

  / System/Library/Extensions

  [no charge] com.tomtom.driver.UsbEthernetGadget (1.0.0d1) [Support]

  Launch system officers: ⓘ

  com.apple.AssetCacheLocatorService.plist [killed]

  com.apple.CallHistoryPluginHelper.plist [killed]

  com.apple.CallHistorySyncHelper.plist [killed]

  com.apple.FolderActionsDispatcher.plist [killed]

  com.Apple.CDPD.plist [killed]

  com.Apple.cloudphotosd.plist [killed]

  com.Apple.followupd.plist [killed]

  com.Apple.gamed.plist [killed]

  com.Apple.icloud.fmfd.plist [killed]

  com.Apple.printtool.agent.plist [killed]

  com.Apple.RCD.plist [killed]

  com.Apple.rtcreportingd.plist [killed]

  com.Apple.scopedbookmarkagent.XPC.plist [killed]

  com.Apple.telephonyutilities.callservicesd.plist [killed]

  [loading] 151 tasks Apple

  [operation] 71 tasks Apple

  14 killed process lack of RAM

  Launch system demons: ⓘ

  com.apple.AssetCacheLocatorService.plist [killed]

  com.apple.GSSCred.plist [killed]

  com.Apple.awdd.plist [killed]

  com.Apple.Emond.aslmanager.plist [killed]

  com.Apple.ifdreader.plist [killed]

  [killed] com.apple.periodic - weekly.plist

  com.Apple.softwareupdate_download_service.plist [killed]

  com.Apple.system_installd.plist [killed]

  com.Apple.wdhelper.plist [killed]

  com.Apple.XPC.SMD.plist [killed]

  [loading] 191 tasks Apple

  [operation] 86 tasks Apple

  10 killed process lack of RAM

  Launch officers: ⓘ

  [failure]... com.adobe.ARMDCHelper.cc24aef4a1b90ed56a [Support] plist

  [loading] com.google.keystone.agent.plist [Support]

  [loading] com.oracle.java.Java - Updater.plist [Support]

  com.TeamViewer.TeamViewer.plist [failure] [support] [details]

  [failure] com.teamviewer.teamviewer_desktop.plist [Support]

  [loading] org.macosforge.xquartz.startx.plist [Support]

  Launch demons: ⓘ

  [loading] com.adobe.ARMDC.Communicator.plist [Support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist [Support]

  [failure] com.adobe.fpsaud.plist [Support]

  [operation] com.backblaze.bzserv.plist [Support]

  [loading] com.barebones.authd.plist [Support]

  [loading] com.ciscosystems.ciscoconnect.daemon.plist [Support]

  [loading] com.google.keystone.daemon.plist [Support]

  [loading] com.logmein.join.me.update - helper.plist [Support]

  [loading] com.microsoft.office.licensing.helper.plist [Support]

  [loading] com.oracle.java.Helper - Tool.plist [Support]

  [operation] com.seagate.TBDecorator.plist [Support]

  [operation] com.starfield.backupservice.plist [Support]

  [loading] com.teamviewer.Helper.plist [Support]

  [failure] com.teamviewer.teamviewer_service.plist [Support]

  [failure] com.vmware.launchd.vmware.plist [Support]

  [loading] org.macosforge.xquartz.privileged_startx.plist [Support]

  User launch officers: ⓘ

  [failure] com.adobe.ARM. [...]. plist [Support]

  [operation] com.amazon.music.plist [Support]

  [operation] com.backblaze.bzbmenu.plist [Support]

  [loading] com.citrixonline.GoToMeeting.G2MUpdate.plist [Support]

  [loading] com.logmein.cubby.updater.plist [Support]

  [operation] com.mlbam.nexdef.plist [Support]

  [operation] com.seagate.dashboard.plist [Support]

  [loading] join.me.launcher.update.peruser.plist [Support]

  Items in user login: ⓘ

  Dashlane Application (/ Applications/Dashlane.app)

  Agent application RealPlayer Downloader (~/Library/Application Support/RealNetworks/RealPlayer Downloader Agent.app)

  Degree application (/ Applications/Degrees.app)

  Sophos Anti-virus UNKNOWN (missing value)

  MacUpdate desktop hidden UNKNOWN (missing value)

  Dropbox application (/ Applications/Dropbox.app)

  Join.me Application Launcher (~/Library/Application Support/join.me/join.me Launcher.app)

  HP Scheduler application (/ Library/Application Support/Hewlett Packard/Software Update/HP Scheduler.app)

  HP product search request (/ Library/Application Support/Hewlett-Packard/Customer Participation/HP product Research.app)

  HPEventHandler UNKNOWN (missing value)

  Other applications: ⓘ

  [ongoing] at.appscape.degrees.24352

  [ongoing] com.Apple.XPC.launchd.oneshot.0x1000000a.EvernoteHelper

  [ongoing] com.Apple.XPC.launchd.oneshot.0x1000001f.EtreCheck

  [ongoing] com.dashlane.DashlaneAgent

  com.evernote.Evernote.25952 [loading]

  com.evernote.EvernoteHelper [loading]

  [ongoing] com.getdropbox.dropbox.25312

  [ongoing] com.LogMeIn.join.me.Launcher.167712

  [ongoing] com.RealNetworks.realplayerdownloaderagent.95072

  [ongoing] JP.co.Canon.cijscannerregister.2272

  Plug-ins Internet: ⓘ

  o1dbrowserplugin: Version: 5.41.3.0 - SDK 10.8 [Support]

  Web of Google Earth plugin: Version: 6.0 [Support]

  Default browser: Version: 601 - SDK 10.11

  Flip4Mac WMV Plugin: Version: 2.4.0.11 [Support]

  AmazonMP3DownloaderPlugin101750: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 [Support]

  RealPlayer Plugin: Version: unknown [Support]

  AdobePDFViewerNPAPI: Version: 15.010.20056 - SDK 10.8 [Support]

  FlashPlayer - 10.6: Version: 20.0.0.267 - SDK 10.6 [Support]

  Silverlight: Version: 5.1.41212.0 - SDK 10.6 [Support]

  QuickTime Plugin: Version: 7.7.3

  Flash Player: Version: 20.0.0.267 - SDK 10.6 obsolete! Update

  googletalkbrowserplugin: Version: 5.41.3.0 - SDK 10.8 [Support]

  iPhotoPhotocast: Version: 7.0

  AdobePDFViewer: Version: 15.010.20056 - SDK 10.8 [Support]

  SharePointBrowserPlugin: Version: 14.6.0 - SDK 10.6 [Support]

  JavaAppletPlugin: Version: 8 73 02 check the version build update Java

  User Plug-ins internet: ⓘ

  WbeTools64_14: Version: 1.0.22.49 © 2012 - SDK 10.6 [Support]

  WebEx64: Version: 1.0 - SDK 10.6 [Support]

  CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Support]

  fileEditTool64_15: Version: 1.0.35.65 © 2013 - 10.6 SDK [Support]

  FreeScreenSharingPlugin: Version: Unknown - SDK 10.9 [Support]

  Safari extensions: ⓘ

  AdBlock

  Add to the list of Amazon gift

  Awesome screenshot

  Dashlane

  CLEA. Video Nr

  EverNote Web Clipper

  3rd party preference panes: ⓘ

  Backblaze backup [Support]

  Flash Player [Support]

  Flip4Mac WMV [Support]

  Growl [Support]

  Java [Support]

  MacFUSE [Support]

  For Mac OSX [Support] Seagate dashboard

  Time Machine: ⓘ

  Skip system files: No.

  Mobile backups: WE

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 249,20 GB disc used: 74,98 GB

  Destinations:

  Backup drive Seagate Plus [Local]

  Total size: 999,86 GB

  Total number of backups: 6

  An older backup: 10/22/15, 12:25

  Last backup: 19/01/16, 21:00

  Size of backup drive: Excellent

  Backup size GB 999,86 > (disk size 249,20 GB X 3)

  Top of page process CPU: ⓘ

  3% WindowServer

  1% kernel_task

  1% com.apple.WebKit.WebContent (7)

  Download RealPlayer 1% agent

  1% com.dashlane.DashlaneAgent

  Top of page process of memory: ⓘ

  647 MB com.apple.WebKit.WebContent (7)

  572 MB kernel_task

  233 MB mdworker (17)

  Safari of 201 MB

  DashlanePluginService 139 MB

  Virtual memory information: ⓘ

  75 MB of free RAM

  4.18 GB used RAM (903 MB cache)

  192 MB of Swap used

  Diagnostic information: ⓘ

  February 9, 2016, 15:36:32 ~/Library/Logs/DiagnosticReports/findNames_2016-02-09-153632_[redacted].crash

  com.apple.AppleSpell - /System/Library/Services/AppleSpell.service/Contents/MacOS/findNames

  Can you press and hold the button of power may be up to 30 seconds to ensure the

  computer is not simply put to sleep; you want him to stop. Then the attempt to start so he could

  run in safe mode, you can troubleshoot and try to check in the system as suggested:

  • Try safe mode if your Mac does not end commissioning - Apple Support

  Additional links to other content that may be useful to solve problems are included in the above page.

  Another element is Force Quit... it can be used to quit the finder:

  • Force an app to close on your Mac - Apple Support

  You may be able to use keyboard shortcuts in start to see on other actions at startup; as

  attempts to use modes of recovery for other restorative actions, repair permissions, etc. or for

  reinstall OS X again. If you have a backup of your content and also a Time Machine backup.

  There is a good reason to suggest that you could restore the computer to a viable State in front

  These symptoms or problems became so large. The test of original material would be on

  it comes with the installation of restore Apple DVD set than computers. Maybe it's worth a go, too.

  • For Mac - Apple Support startup key combinations

  • With the help of Apple Hardware Test - Apple Support

  • Apple OS X and Time Machine tips:

  http://pondini.org/OSX/home.html

  • OS X: on OS X Recovery - Apple Support

  {Some newer models may have been updated to use the Internet recovery to restart the computer}

  online system - if the internal drive and its recovery partition missing somehow to any system start-up.

  The model seems to be too old for the Constitution or upgrade to make use of this feature, however...}

  If you have an external drive with a clone of the complete system on board, which could be used to test

  and troubleshooting of the material aspect of the computer; and a source for new offline installation clone.

  Perhaps the 'the etrecheck guy' will examine in this thread and point out some details that I'm not very familiar.

  Good luck in this case!

• I get an error message related to 1CF157n4.exe. It appears randomly.

  Original title: ErrEE

  I get an error message "1CF157n4.exe it appears every few minutes.  How can I fix?

  Hi Garyantle,

  ·         When exactly do you get the error message?

  Please provide further information on the error message.

  The average while I recommend you perform the clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  You can also visit the link of the article of Microsoft that will guide you on how to ask questions below.

  How to ask a question

  http://support.Microsoft.com/kb/555375

• Error message: usbbootplg wrapper has stopped working

  Always when connect the disk external storage via eSata, the following error message appears: usbbootplg wrapper has stopped working. I then stopped the external drive in order to continue working. Connection via USB 2.0 does not cause any difficulty. Could someone give me advice how to solve and fix this problem please? I have skills of the average user right. THX, Peter

  Hi Peter,.

  ·         Did you do changes on the computer before the show?

  I suggest you see the Microsoft article and check if the problem still persists.

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  I hope this helps.

• I downloaded for brother's keeper genealogy software and got the error message comdlg32.ocx is not properly registered a file is missing or invalid

  I tried the following:

  -J' downloaded comdlg32.ocx from a source linked and registered successfully in c:\windows\system32. Restarted. Tried to open the program and got the same error message.

  -Uninstalled program. Downloaded again with mozilla set to run as administrator, rebooted, got the same error.

  -Recorded in system32 times Comdlg32.ocx and the folder of the program in c:\program files, set to run as administrator, program can always put the error message.

  -Tried to set the compatibility to Windows XP program, get the same error.

  -Tried to set compatibility to run as administrator.

  The program will run in Mode without failure. I'm just an average user and I'm frustrated to the point of tears. Can you please help? Thank you.

  Thank you very much for the help.  I solved the problem by uninstalling the software and then create an admin login.  I logged in as admin and downloaded the software, installed, then it worked fine.

• I found in my logs event before I even had my PC delivered they had a problem installing Windows 7 Premium 64-bit, and this error message is listed under Windows-Setup: 0xC000000D

  I have nothing else problems with my new system had in the past 2 months and have done two factory restores.  I get the "your video driver has failed but recovered" several times a day, it progresses freezing and, sometimes, the old bue screen.  I worked with the manufacturer and they took all original event logs before we did the restoration of 1.  After a Microsoft Update, it was even worse that I did a second on 10/18.  You went out with an update again and things seem to be OK until yesterday when it started happening again and again.  So I went in the event logs to see what they said and I found the error message a week before the system arrived even at my doorstep.  It seems whenever I did a factory restore it just keeps reloading the same problem!  Since they send you the REAL DISKS any more there is no way own things off and really repair the enrire thing - if it's still possible for an average user.  Other information: Journal name Microsoft Windows Kernel-EventTracing/Admin Source connected to kernel-EventTracing 2010-08-06 19:53:04 Evnet 3 category of task ID: Session-level: error keywords: Session OpCode: stop

  There are several other error messages that appear on a regular basis, not to mention the display driver one - that is the most obvious to me.  I saved the newspaper while they cannot get lost.  You can see that this same error message when I did the last factory restore on 10/18 is still original and mistakes so I could look at just to be reinstalled again.  My question is what is it, can it be repaired or do you need to strip ALL of this machine?  And while you will never say so, shouldn't they have taken this BEFORE they sent this computer to a client?

  Check with your PC vendor to determine if updated video drivers are available.
  Download and install if necessary. The video drivers are often buggy when
  originally published, so what you see is not unusual. I hope it's a
  minor issue if you had not seen the papers you would have noticed.
   
  "PC Nana" wrote in message news: c8aef944-7d5d-4888-8be5-839e71166366...
  > I had any other problems with my new system over the last 2 months
  > and have done two factory restores. I get the "your video driver has.
  "> failed, but recovered" several times a day, it progresses to the gel and
  > sometimes the old screen bue. I worked with the manufacturer and
  > they took all the original event logs before we did the 1st
  > Restore. After a Microsoft Update, it got even worse then I did a second
  > 10/18. You went out with an update again and things seem to be OK
  > until yesterday when it started to happen again and again. So I went in
  > the event set myself to see what they said and I got the error message
  > a week before the system arrived even at my doorstep. It seems
  > whenever I did a factory restore is just keeps the same reload
  > problem! Since they send you the REAL DISKS any more there is no way
  > own offshore things and really repair the enrire thing - if that's even
  > possible from an average user. Other information: name of the journal
  > Microsoft-Windows-Kernel-EventTracing/Admin Source Kernel - EventTracing
  > Connected on 06/08/2010 19:53:04 Evnet 3 category of task ID: Session level:
  > Error keywords: Session OpCode: stop
  >
  > There are several other error messages that appear on a regular basis
  > Also the display one - driver is it more obvious to me. I have
  > saving the newspaper while they cannot get lost. You can see that
  > when I did the last factory restore on 10/18 this same error message is
  > here and still the original errors so I could just look in
  > reinstalled again. My question is what is it, can it be repaired or do
  > you must strip EVERYTHING of this machine? And while you'll never
  > say so much, shouldn't they have taken this BEFORE they sent this computer
  > to a customer?
  >
   
   

• video card error message, "nvlddmkm.sys has stopped responding and has recovered."

  My computer has an nvidia 9800 gt. Since then, a week ago that I am unable to play a video game, or use windows media center. If I ever start a video game or windows media center the program crashes and I get the error message, "nvlddmkm.sys has stopped responding and has recovered." A few times, I get a message from the blue screen and the computer needs to restart. I reinstalled the drivers and even restored software from my computer to the original factory condition. A year ago I noticed my computer screen would get dark, as if I was wearing sunglasses. I want to restart my computer and the screen would be normal again. I was wondering if my video card burned to some, and if I need a new video card. The average temperature of my videocard 76 degrees Celsius, is 167 degrees Fahrenheit.

  Hello

  The best sources of information would be Nvidia Support, their documentation online and their
  forums. Try to remove ANY power and reseating the cables (both ends, memory and cards
  When possible) - in fact, remove and replace - do not just tight. Clean the dust bunnies
  and vents. Make sure that the internal fans are working and trying to use a small fan to blow
  directly into the inlet to see if that helps.

  NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA Support - check with the support that she might be a known issue
  http://www.nvidia.com/page/support.html

  NVIDIA forums - also check for the forums it might be a known issue or others likely to have
  http://forums.nvidia.com/

  ==============================================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• BlackBerry smartphone error message-eception excepton:index 6 > = 6

  Info on the device

  Carrier: BSNL India

  Device: curve 8520

  OS worm - 5.0.0.592

  now a days whenever I restart the device the message mentioned above appears, I do not understand what is average.  Recently, I updated above mentioned official os of carrier's website & also to reinstall several aps bb & third party according to the change of operating system. but don't understand exactly where things went wrong.

  Please help solve the problem.

  Thank you for all the support

  My problem is solved and now I don't get the error message.

  what I did is I reinstall the OS 5 with the help of the new software of blackberry 6 desktop & to my surprise the many features of OS 5 (which I've only read, but has not experienced so far) are now manifest which was not the case the when I install the same with 5 BDS, especially options configuration EMAIL BIS & contact sync with gmail & restart in the whole of time etc..

  I read in the forum that BDS6 makes wonder to reinstall the operating system, so I gave the test & really my problem solved

  http://supportforums.BlackBerry.com/T5/BlackBerry-Desktop-software/praise-for-desktop-software-6/m-p...

  So guys if you have any problem due to the applications/software newly installed please try to reinstall the operating system using BDS 6 & hope it will do wonders for you too.

  Enjoy

• Update of CRMI against COE Oracle 10 G server fails with the error message Invalid Date of creation

  I have an application that performs an update of a piece of content via CRMI. The element is specified viaA content ID. Since UPDATE_DOCINFO is the service DOC_INFO needs service is executed first to get it.

  DOC_INFO returns information very well. However, when UPDATE_DOCINFO is executed, it always seems to return an error message stating that creation Date is not valid. The element content updates without this error via the Native Web INTERFACE. My code works when pointed at an Oracle 11 G Server COE.

  I tried:

  1. Adding did so to a new DataBinder, without dCreateDate
  2. Adding did so to a new DataBinder, with dCreateDate
     • Add dCreateDate as a date object (from DOC_INFO response I've tried)
       • through thegetDate()
       • manual conversion with DataObjectEncodingUtils.decodeDate() (w / get() )
     • Add a string
       • convert with SimpleDateFormatter similar to how RIDC encodes (w / getDate() )
       • manual conversion with DataObjectEncodingUtils.encodeDate() (w / getDate() )
       • as «»
       • as null
       • get()Instead ofgetDate()
  3. Directly using DOC_INFOresponse Binder
  4. With the help of the library of CRMI 11 G (3 above) 5 using the RIDC 10 G (1-3 above) library

  All listed approaches have returned the same error message.

  Here's the method I use for the update. The commented code is the thing I've tried that does not resolve the issue.

  public ServiceResponse executeByContentId (String szContentId, map < String, String > updateHMap)

  throws RemoteException

  {

  If (log.isDebugEnabled ())

  {log.debug ("the execution of an update:" + szContentId) ;}}

  get the RIDC context - guess the context RIDC has already been created.

  IdcContext = RIDCApp.IDC_CONTEXT_LIST.get context (getUsername ());

  Download the client

  Customer IdcClient = RIDCApp.IDC_CLIENT;

  create the command object to run

  DataBinder dataBinder = client.createBinder ();

  film for convenience

  Binding EDAMDataBinderWrapper = new EDAMDataBinderWrapper (dataBinder);

  Binder. DOC_INFO_BY_NAME();

  binder.putDDocName (szContentId);

  binder.putRevisionSelectionMethod (RevisionSelectionMethod.Latest);

  ServiceResponse rawResponse = null;

  Try

  {

  log.info ("About to RUN: (previous update) \n" + binder.toString () ");

  rawResponse = client.sendRequest (context, binding);

  DataBinder responseBinder = rawResponse.getResponseAsBinder ();

  log.info ("Found: (previous update) \n" + responseBinder.toString () ");

  used to get the result

  EDAMDataBinderWrapper docInfoResult =

  EDAMDataBinderWrapper (responseBinder) new;

  //used for the update

  EDAMDataBinderWrapper updatebinder =

  EDAMDataBinderWrapper (client.createBinder ()) new;

  //new EDAMDataBinderWrapper (responseBinder);

  //required fields!

  DocInfoSet of the DataObject = docInfoResult.getResultSet ("DOC_INFO")

                                                                          .getRows () .get (0);

  updatebinder.putLocal ("dDocName", szContentId);

  updatebinder.putLocal ("a", docInfoSet.get ("dID"));

  updatebinder.putLocal ("dRevLabel", docInfoSet.get ("dRevLabel"));

  updatebinder.putLocal ("dSecurityGroup", docInfoSet.get ("dSecurityGroup"));

  updatebinder.putLocal ("dDocAccount", docInfoSet.get ("dDocAccount"));

  //updatebinder.putLocal ("dCreateDate", docInfoSet.get ("dCreateDate"));

  //updatebinder.addDate ("dCreateDate", docInfoSet.getDate ("dCreateDate"));

  //updatebinder.putLocal ("dCreateDate", "");

  //updatebinder.putLocal ("dCreateDate", null);

  //updatebinder.putLocal ("dCreateDate", docInfoSet.getDate("dCreateDate").toString ());

  DCreateDate //Date = docInfoSet.getDate("dCreateDate");

  / * BEGIN - Encoder Date average Java * /.

  //example format: 2012-05-16 15:35

  SimpleDateFormat sdf = new SimpleDateFormat ("yyyy-MM-DD kk:mm:ss");

  updatebinder.putLocal ("dCreateDate", sdf.format (dCreateDate));

  //END - encoder Date average Java * /.

  / * BEGIN - Encoder Date Oracle COE medium * /.

  updatebinder.putLocal ("dCreateDate",

  DataObjectEncodingUtils.encodeDate (dCreateDate));

  //END - code way Date Oracle COE * /.

                  /*

  String dCreateDateString = docInfoSet.get("dCreateDate");

                  try

                  {

  updatebinder.addDate ("dCreateDate",

  DataObjectEncodingUtils.decodeDate (dCreateDateString)

                                                  (. getTime());

                  }

  catch (ParseException exception ignored) End Sub

                  */

  String xAssetSubType = docInfoSet.get("xAssetSubType");

  //log.debug ("setting in"xAssetSubType":" + xAssetSubType);

  updatebinder.putLocal ("xAssetSubType", xAssetSubType);

  / / Set the values of metadata

  for (String szFieldName: updateHMap.keySet ())

  {updatebinder.putLocal (szFieldName, updateHMap.get (szFieldName)) ;}}

  updatebinder. UPDATE_DOCINFO(); to say the next request to perform the update

  //now that we have result - try the update

  Return the response of update of the document

  log.info ("About to RUN: (updated) \n" + updatebinder.toString () ");

  If (log.isDebugEnabled ())

          {

  log.debug ("update fields");

  for (entry entry < String, String >: updatebinder.getLocalData () .entrySet ())

                  {

  log.debug ("Update: '" + entry.getKey () + "' to '" + entry.getValue () + "'" "");

                  }

          }

  ServiceResponse response = client.sendRequest (context, updatebinder);

  log.info ("Found: (updated) \n" ")

  + response.getResponseAsBinder () m:System.NET.SocketAddress.ToString ());

  return response;

          }

  catch (Cie IdcClientException)

          {

  log.error ("Error updating the Document", sea ice);

  //throw new RuntimeException ("Error updating the Document", sea ice);

  //throw new RuntimeException ("error updating the Document-" + ice.getMessage (), ice);

  throw RuntimeException (ice.getMessage () new, ice);

          }

  //something gone wrong

  //return null;

  }

  I could solve the problem.

  The answer is proven be setting the parameter UserDateFormat on the RIDC Binder that I used to make the update request.

  Then I got just to make sure that all of my dates been serialized using this same format.

• "Error message when you run the action through droplets ' error: no item of this type.

  Whenever I run an action via a droplet, I receive the error message after the image has been processed "error: no element of this type" on average, it appears 3 times by image and I have to continue to press the return key to get rid of the message.

  The action that the drop is based on works fine within photoshop.

  This drop was working fine until the last update and I have used it for years. I reinstalled Photoshop (CC 2015.1.2) and re-created the action and droplets but still having the same problem.

  The action is very simple change RGB to CMYK, change dpi to 300 DPI and save as a file .psd format

  The original file that I am conversion types .jpg, .png and .tif

  Gout is saved to the desktop and light the processed files in a folder on the desktop.

  You can try to reset Photoshop back to default preferences.

  To re-create the Photoshop preferences files, start the application while pressing Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop settings file?"

  If the step above have not, then uninstall the application, restart your machine and reinstall from creative cloud desktop application.

  Kind regards

  Mohit

• CS5.5 error message "access denied."

  No additional information provided other than 'access denied '.  I can burn Blu - ray discs, but when I try to burn a DVD double layer this error message appears.  I have about 1.5 GB of space on the DVD, then, what is the average of "Access denied" error message to double layer?

  There are few examples of solutions other than running as an administrator. It is probably because the error occurs for many reasons. Since you say "no additional information", I guess that's the "access denied" and not the "Blu - ray error: 'access denied', Code:"12"error." It doesn't matter really; the same run as administrator is the fix. But the bluray error has been a known issue for Encore CS5.

  Make sure that you really like ongoing run 'as administrator' and don't not running under an account with administrative privileges. And if you have still set to always start 'as administrator', check who has lost none of its value.

  Another issue I found was a user who has removed the slideshows, created the project, and cela worked.

• Error messages associated with DPS App build

  First of all, I got an error:

  "Build does not contain the correct beta right."

  I tried to download my Build again.

  This has led to a new error message:

  'e ITC.apps.assetvalidation.PURPLE_APP_FRAMEWORK_AND_APPEX_ARCHITECTURE_MISSING.error.messag '.

  I do not understand what these errors of average or to correct.

  I'm trying to introduce my first app and it's very discouraging.

  It seems to be a buzz that these errors are due to the most recent update of Apple.

  Has anyone out there run in these errors, and more important again, is there an easy solution?

  Thank you!

  See presentations App JIU stuck in the status of "upload received". We are actively investigating several problems download with iTunes.

  Neil

• Geocoding server save error message

  Hello
  I am trying to install a geocoder. I created the tables (gc_road_yx, etc.) and fill them with data. The geocoder should work with a server and so I installed the geocoding server. The server starts correctly, but if I send an XML request I always get the coordinates of the center of my zip code area and the geocoding server save code following error massage:
  match_code = "11".
  ERROR_MESSAGE = "& #63; & #63; & #63; & #63; & #63; & #63; & #63; & #63; & #63; & #63; B281CP & #63;
  match_vector = "& #63; & #63; & #63; #63; 3131311 & #63; & #63; 100 & #63; ">
  I know what means the code (the postal code is put in correspondence, but does not match the name the city.), but someone knows what the error massage or the average vector game?
  Thank you
  JoAl

  It is documented in space usage Guide.

  "Your message: error_message = '? B281CP?

  The first 4 fields are reserved for future use.
  The next is set if there is a match with the number of the House.
  These are the only games to your address.

  Position
  11 built-up area or city B
  12 and 13 are not used at the moment.
  14 region 1
  C 15 countries
  Code postal 16 p

  So it's not to find the street in the postal code or a particular city.

  Similarly matchvector is also documented in the user guide. And your results, looks like it says the same thing as the error message.

  Siva

• error message when try to sync the iPhone, "invalid response from the device?

  What can I do when I receive this error message when you try to sync to my iPhone 5 s - "invalid response from the device?

  -What are your 5 updating to 10.0.2 iOS iPhone? If this is the case, you must have the latest version of iTunes on your computer, which is required for Mac OS X 10.9.5 12.5.1, or above. To meet these specifications will be receiving this error.