I get an error message related to 1CF157n4.exe. It appears randomly.

Similar Questions

• at startup I get the error message that the gamevance.exe stop working

  original title: gamevance.exe for vista

  at startup I get the error message that the gamevance.exe stop working, I went to start to delete, but do not have the option to remove it.

  Hi JoAnneKimmey and pugmolly,

  When looking for this, it seems to be malware, so I'll include a link to a useful thread in which you can find a solution:

  How to get rid of malware

• I get an error message RunDll module 'wgsdgsdgdsgsd.exe' is not found. What does that mean? Where can I find the statup line which refers to this module?

  This message only appears at startup (resarts or normal startup) and just close it all can work (apparently) very well.

  Assuming that when you close it message your computer works fine, there is probably something in the routine to start looking for this file. When I updated my antivirus AVG, they had a free trial of a utility that scans your computer and corrects errors such as something poining to a lolocation that does exist (because you deleted the infected file).  I think it's how I solved the problem on my computer, but I don't know what it was.  Good luck.

  Jim Lago

• I get the error message: 87A required option does not appear in the command line.

  * Original title: errors

  I'm trying to reformat my Windows 8 operating system, because I have pop-ups, lack of slow response files and a host of other problems which seem to have started when my son downloaded things on the Internet. I have missing files and was trying to solve this problem so that I could go back to reformat the hard drive.

  I get the following error:

  Error: 87

  A required option is missing from the command line.

  Make sure that /index or/Name is specified.

  The DISM log file can be found at C:\Windows\Logs\DISM\dism.log

  How can I solve this problem?

  MD

  How are you trying to "reformat"?

  Have you thought about running a malware first application to see if it is the problem?

  Please download the free version of Malwarebytes.
  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.

  http://www.Malwarebytes.org/products

• When firefox loads I get an error message "cannot find / / / jpsnotify.exe." now load Firefox, but every time I go into something else, it seems. This started to happen when I downloaded a new version of java.

  I downloaded a new version of Java and then I started to have a "windows can't find c:\java\jre6\lib\deploy\jqs\ff\...------..» \.. \bin\jqsnotify.exe. now, this only happens when loading firefox. It happens through the use of firefox during the loading of other programs. any suggestions?

  This has happened

  Each time Firefox opened

  Try to reinstall Java. See using the Java plugin to display interactive Web sites content

  A quick search for jqsnotify.exe on Google indicates that it is related to the Java QuickStart option.

• I am trying to download the trial version of DC Pro and at the end of the installation get an error message indicating an invalid code has been provided - what should I do?

  What should I do when I get an error message relating to a code not valid when you try to download DC Pro?

  you don't need a code/serial number to install a trial version.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 pro extended exe,7z extended pro 9 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• When turned on the computer he get an error message ' missing < root windows > \system32\ntoskrnl.exe.

  Hi, I replaced the motherboard in my computer, it seems to work very well, but when you turn on the computer I get an error message:

  \SYSTEM32\NTOSKRNL.exe is missing or damaged

  At this stage there is no cursor, or what I can do to get in my area on my drive, it's as if the computer shuts down and this message does not disappear.

  I am running Windows XP operating system.

  Is there a solution for this?

  Thank you

  Hello

  · What is the number and the model of the computer?

  · What is the service pack installed on the computer?

  Follow the steps in the link below and check if this can help: error message: "Windows did not start because of a configuration of the disk of the computer problem": http://support.microsoft.com/kb/314477

• Error message at startup: "cssauth.exe instance cannot start due to an initialization error" and also unable to open help and the file

  Original title: cssauth.exe instance cannot start, help and Support of file disable

  Whenever I connect to my windows XP, it still says cssauth.exe instance cannot start due to an initialization error and I could not open my file help and suppot. Please help me. Thank you before

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. What is the brand and model of the computer?
  4. who help and support files are you referring to?
  5. what exactly happens when you try to open it? You get the error message?

  cssauth.exe is related to the Client Security Solution.

  Step 1: Try disabling startup cssauth.exe in the configuration of the system.

  Here's how:

  1. click on start > run.
  2. type msconfig and press ENTER.
  3. click on the Startup tab.
  4 locate cssauth.exe, and clear the check box for this.
  5 restart the computer and check for the issue.

  Step 2: If you still get the same error at startup then perform the clean boot on the computer.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  I would also ask you to contact the manufacturer of the computer because the problem is with the client security software that is provided by them.

• I get an error message on itunes app crash coreaudiotollboc.dll How can I solve this

  I get an error message on itunes app crash coreaudiotollboc.dll How can I solve this

  These errors can usually be fixed by removing the offending dll, then fix the component it is programs and features Control Panel. CoreAudioToolbox.dll belongs to Apple Application Support and are normally in

  • C:\Program Files\Fichiers Files\Apple\Apple Application Support or
  • C:\Program Files (x 86) \Common Files\Apple\Apple Application Support

  where the name of the Program Files folder may vary depending on the region.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent if you have problems to download, need to revert to a previous version or try the version iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

  Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

  TT2

• My iCloud and shared calendars has stopped working in MS Outlook today.  They worked yesterday.  Now, I get the error message "cannot open this series of records.  The information store cannot be opened?  I tried the fix standard support.

  My iCloud and shared calendars has stopped working in MS Outlook today.  They worked yesterday.  Now, I get the error message "cannot open this series of records.  The information store cannot be opened?  I tried the fix standard support.

  Same thing here.  Looks like Windows did an automatic update during the night, and now nothing iCloud associated work (calendars, contacts, etc.)

  I also noticed that the error message: "could not load file or Assembly ' MOM." Implementation ' or one of its dependencies.  The system cannot find the specified file. "It started after restarting the Windows Update as well.  I imagine that the two are related in the same problem to iCloud.

• Whenever I restart the computer, get an error message rundll Securitycrt\Appapint5.dll is missing.

  missing appapint5.dll file

  Whenever I restart the computer, get an error message rundll Securitycrt\Appapint5.dll is missing.  Then cannot rely on automatic updates.  Wait they are related.  Could not find the Appapint5.dll file on the ms site.  Runnig XP.  What I can do, or have been find file?
  CB

  It is the Trojan horse!

  Technical information
  Virus name:	Trojan.MulDrop3.7713
  Found:	Dr.Web
  TO ENSURE THE DISTRIBUTION AND THE AUTORUN: Modifies the following registry keys: [\Software\Microsoft\Windows\CurrentVersion\Run] "Acrocfgclass" = "rundll32.exe"\isaNetARM\Acrocfgclass.dll",Appapint5 LibGLmm' MALICIOUS FUNCTIONS: Running the following: \rundll32.exe "\isaNetARM\Acrocfgclass.dll",Appapint5 LibGLmm ". \rundll32.exe "% TEMP%\userMouseCtrl.dll", Appapint5 xpMainInterval CHANGES THE FILE SYSTEM: Creates the following files: \isaNetARM\Acrocfgclass.dll %Temp%\userMouseCtrl.dll Deletes the following files: %Temp%\userMouseCtrl.dll VARIOUS: Research for the following windows: ClassName: 'indicator' WindowName: " ClassName: 'CRLobjTray' WindowName: " Please note: some characters are replaced with symbols in order to prevent inappropriate access to malware.

  Steps to automatically remove the "Trojan.MulDrop3.7713".

  Download Dr.Web CureIt! and save it to the desktop. Download security space Pro 7.0 (32/64 bit), save it to the desktop. Restart the computer using safe mode (press F8 before any Microsoft logo appears). Double-click "cureit.exe" on desktop, follow the instructions on the screen to scan the hard drive. (Wait a few moments, it may take from 20 to 60 minutes to perform an analysis of the express) Once the scan is complete, select all viruses find and choose "Cure." (If some files are not suitable to be healed, choose 'Quarantine' or 'Delete'). When all detected viruses are cured, quarantined, or deleted, restart in Normal mode. Uninstall antivirus software existing that can not kill the virus and then reboot again. Navigate to the Pro area security configuration file on the desktop, double-click to run it. (For procedures, please refer to the video installation guide.) During installation, choose to get a demo key. After the first update of time, the scanner will be launched again, leave the scanner at this stage. Complete the installation by restarting the computer. If time is allowed (possibly several hours), perform a full scan of Dr.Web Scanner. Note: If it is impossible to start Windows because of the infection by the virus, try Dr.Web LiveCD or Dr.Web LiveUSBinstead of Dr.Web CureIt! The time required for quick scan or full scan depends on many factors, such as the performance of the system, memory available, running processes, number of discs and files, etc..

• As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." How should I do?

  Original title: Rundll error help

  As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." -What it means and how to fix it?

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• I want to add a printer, but get the error message "print spooler service does not work."

  I can't print from my computer.  This has happened with no other visible defects on the computer or the printer.

  When I use the printer in case of problem, and hit the 'add printer' link, I get the error message "print spooler service is not."

  "I did a search on"print spooler"but got no result

  Duane

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Instead, go to the other link and download and get and use the utility 'cleanspl' such as described here.

  If the suggestions below do not resolve your problem, after back and don't forget to include the following information:

  • The version of Windows you have, including service pack (start > run > winver > OK)
  • The brand and model of printer you have (includes the manufacturer, model and model number, as in HP Deskjet 6800)
  • How the printer is connected to the computer (parallel, USB, network, wireless, etc.).
  • It happened just before this symptom started
  • What application antivirus you have and if your subscription is up to date and has been maintained continuously
  • The full text of the error messages related to printing, without paraphrasing

  
  

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on the following site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• Get the error message "failed to open the group policy on this computer object' while running gpedit.msc.

  Original title: I can't run gpedit.msc

  I'm configure GPO, but I get an error message that says: "cannot open the purpose of group policy on this computer. You do not have the appropriate rights. "and then on the details, he says:"unspecified error ".

  I use Win 7 SP1 Ultimate and I'm using an administrator account.

  Any ideas?

  Here is a screenshot:

  

  Hello

  Thanks for posting your question on the forum.

  Group Policy Editor (gpedit.msc) is only in the editions Windows 8 Pro and Enterprise in Windows 8.
  See the comparative table listed here on the blog of Windows 8. Please see the Note at the bottom of the article that Windows 8 Enterprise is not listed as you can get this version of Volume License.

  For more details you can see the thread mentioned below.

  where can I find GPEdit.msc?

  Hope that the information provided is useful and let us know if you have any concerns related to Windows.

  Kind regards

• get the error message

  Hello. Whenever I try to test my application with the Simulator, I get this error message:

  Exception in thread "main" java.lang.UnsupportedClassVersionError: Bad version in .class file number
  at java.lang.ClassLoader.defineClass1 (Native Method)
  at java.lang.ClassLoader.defineClass(ClassLoader.java:676)
  at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
  at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
  in java.net.URLClassLoader.access$ 100 (URLClassLoader.java:56)
  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:195)
  at java.security.AccessController.doPrivileged (Native Method)
  at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:317)
  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:280)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
  at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:375)

  I've updated my java version 1.6, so I don't really know what it is. There was another thread on the forums with a related issue, but apparently java update did the trick. Everything is up to date on my computer. It's the only error that appears for me. Any suggestions?

  Is not find the SWF file loading that explains the broken link image.

  It works with in FB4 as an AIR application (outside the Simulator)?

  If so, there is a charger problem.  You include the SWF file as part of your installation?  Are you assuming that it is in the same directory as the parent application?

  If it works as an AIR application, then you either did not include that as part fo the installation (you must specify the file with the installation of the CLI blackberry program), the installation is put somewhere else, or the charger on the Simulator does not work well.

  Examine the File class to verify that the file is here (methodexists ) before attempting to load, else start an AlertDialog window for testing purposes.

  Depending on your application, if none of the above works I would re - implement using the BB SDK.  But as you and others might still want to load a SWF file at a given time, it would be good to know what part of the loading procedure will not.