Avory Labels: Problem with labels

Similar Questions

• Problems with mpls ldp label control.

  Hello!

  I have a strange problem with the ldp mpls label command. Cisco's Web site says this command was introducedn in IOS version 12.2 (33) CBC

  But as you can see I can't type this command...  I use GNS3.

  Thank you

  Label.jpg

  

  Hello

  [If this is not there this is is not supported in this version its nothing to do with GNS3 as complete pictures there not stripped like the IOUs of Linux, many commands have been removed between the progress of the v12 to v15 was huge change] you can check and compare images with this tool and what commands they support and what they have changed too

  http://Tools.Cisco.com/ITDIT/CFN/JSP/index.jsp

• Problem with colored labels

  Hello

  I'm having some problems with color tags when you use lightroom;

  I recently upgraded to Lightroom from 5.6 to 6.5, and all the photos of my catalog with tags color turns white label only.

  I also have the same problem when I import pictures from my laptop catalog, whith photo colors such as red, blue, green, turns in a white label...

  Is there a problem with LR 6.5?

  Could you help me please?

  Cosette

  I finally found the solution.

  During the upgrade, LR languages have changed, and the words associated with the colors too, labels

  so I translate just the name of the color in the metadata / color label set / change, and everything is fine!

• Problems with speed of Pre adjustment knobs

  I have a problem with setting new calls abbreviated after the last update1.3.5.1. Since the last update I can't put a new speed dials. I go to the contacts app, select the contact that I want to put a speed dial. After you select this contact I tap the top left corner labeled contacts and select Set Speed Dial. After selecting this option, he brings me to a list of screen all possible short calls available and used. This doesn't happen and has not happened since the last update. Can someone tell me what could be wrong.

  I understood why my speed dials were broken (name and number with a white screen when you try to assign a speed dial).
  
  http://forums.precentral.NET/Palm-pre/234852-i-fixed-my-broken-speed-dial-issue-1-4-couldn ' t-game-speed - dials.html #post2285700

• M45 S351 problems with scrolling using the touchpad

  I have some problems with scrolling with the touchpad. In some applications, like Mozilla Thunderbird, the touchpad scrolling does not at all! If I contact the right side of the touchpad by finger in Thunderbird, I see the label of Scroll on the screen, but no scrolling occurs. What is the problem? In Opera, I need to click on the browser page to 'activate' the touchpad scrolling and it also irritates cause in IE I do not have such problems: I have lunch just Explorer and scrolling of the works from the beginning... How to solve this problem?

  [Edited by: admin on August 29, 2006 06:52]

  Fix for that is unknown to me, but it turns out that the unit has been tested only with Microsoft products (Designed for Microsoft WXP label applied on the device) and not with other third-party software of the part. This function is not only an example. There are many of them. Please don t see this as a problem.

  On this path, I will not say that you MUST use just preinstalled stuff but there are many things that you have to live with.

  Perhaps someone else knows more about it.

  Good bye

• Problems with the Ethernet controller and PCI Satellite L30-10 X device driver

  HelloW!

  Sorry for my bad English, I'm from the Russia.
  A few days ago, I bought Satellite L30 - 10 X with W Vista on board. In my opinion, that this OS does ' t very good on this computer, so I install W XP.

  I have some problems with drivers. At first, I don't know which model I have: PSL30 or PSL33? I have download all the drivers for the two models. But after installation, computer doen't find the drivers for the Ethernet controller and PCI device...

  Hello

  Satellite L30-10 X belongs to the series of PSL33E. This number located on the label on the bottom of the device!

  You must choose this number in the form of driver download for XP compatible drivers.
  I put t know why you are not able to install the LAN driver. I have the same laptop with Vista and I've install the XP and all the drivers will work perfectly.

  I assume that you have installed the drivers in the wrong order. Please take look in the Toshiba installation instructions txt file. In this order, install the driver! This is important.

  I think that you should install XP again to ensure that the registry clean, then download and install the XP drivers compatible as mentioned in the installation instructions file.

  Good luck

• I have problem with my Wifi drivers

  Hello

  I have problems with wifi on my laptop.

  my product number is QC400AV hP PAVILIAN g6, I also have the problem of the the wifi light which does not have the blue light. I don't know why after formatting my laptop which is a problem occurs or not. But I can not access the wifi I can access easily in the past.

  I had three yellow label in Device Manager. In other devices - 1) Ethernet controller, Network & Controller.I PCI SIMPLE controller through its properties and I find 2 different IDs, code FRI/PCI that ID you want? Please send me the message. These hardware IDS and Compatible IDS.

  Thank you

  Hello:

  Select the second download option...

  Download drivers and work very well for me using the option of download-only, do not to use the first option.

• Problem with the report and the system of axis 2d

  Hi, I'm trying to write a script with tiara, who wrote a 2d axis system in the report but I'm having a lot of problems with it.

  What I'm trying to do, is make 3 or more system axis 2d in the report, each displaying a part of the data of 2 channels (x = ch0, ch1 = y).

  With only 1 graphic I get what I want, but when I try to add the 2nd or the 3rd, they show without my defined x-scale and with the offset x different from the first chart.

  I tried everything, but I could not remedy

  I added as attachments the .csv file that I use to ch0 and ch1 and 2 screen shoots "what I get" (about the problem with the script) and "what I hope to get" (done manually, is what I'm trying to get the report)

  Any help will be appreciated, thanks in advance

  Ierman

  I'll post my code here:

  Dim Xscale, Yscale
  XScale = Array (0,25,0,5,49)
  Yscale = Array(-0.2,0.2,-0.2,10,4)
   
  Call PicDelete()
  Call GraphObjNew ("2D-Axis", "2DAxis1")
  Call GRAPHObjOpen ("2DAxis1")
  D2AxisTop = 1

  D2AxisBottom = 70
  D2AxisLeft = 1
  D2AxisRight = 1
  Call GRAPHObjOpen ("2DYAxis1_1")
  D2AxisyScaleType = "manual".
  D2AXISYBEGIN = Yscale (0)
  D2AXISYEND = Yscale (1)
  D2AXISYORIGIN = Yscale (2)
  D2AXISYTICK = Yscale (3)
  D2AXISYMINITICK = Yscale (4)
  Call GRAPHObjClose ("2DYAxis1_1")
  Call GRAPHObjOpen ("2DXAxis1_1")
  D2AxisxScaleType = "manual".
  D2AXISXBEGIN = Xscale (0)
  D2AXISXEND = Xscale (1)
  D2AXISXORIGIN = Xscale (2)
  D2AXISXTICK = Xscale (3)
  D2AXISXMINITICK = Xscale (4)
  D2AxisXTxt = ""

  D2AxisXColor = 'black '.

  D2AxisXTickAuto = 1
  D2MTickLineWidth (1) = 0.1
  D2MTickLineType (1) = "solid".
  D2AxisXTickSize = 60
  D2AxisXTxtAutoCo = 0
  D2MTickColor = "red".
  Call GRAPHObjClose ("2DXAxis1_1")
  Call GraphObjNew("2D-Curve","New_Curve")

  Call GraphObjOpen ("New_Curve")

  D2CCHNX = "[1] / [1]" "

  D2CCHNY = "[1] / [2]" "

  D2CurveColor = "red".
  Call GraphObjClose ("New_Curve")
  Call GRAPHObjClose ("2DAxis1")

  Dim Xscale1, Yscale1
  Xscale1 = Array (25,50,0,5,49)
  Yscale1 = Array(-0.2,0.2,-0.2,10,4)
  Call GraphObjNew ("2D-Axis", "grafic")
  Call GRAPHObjOpen ("grafic")
  D2AxisTop = 40

  D2AxisBottom = 37
  D2AxisLeft = 1
  D2AxisRight = 1
  Call GRAPHObjOpen ("2DYAxis1_2")
  D2AxisyScaleType = "manual".
  D2AXISYBEGIN = Yscale1 (0)
  D2AXISYEND = Yscale1 (1)
  D2AXISYORIGIN = Yscale1 (2)
  D2AXISYTICK = Yscale1 (3)
  D2AXISYMINITICK = Yscale1 (4)
  D2AxisYTxt = "" ' testo asse label y
  Call GRAPHObjClose ("2DYAxis1_2")
  Call GRAPHObjOpen ("2DXAxis1_2")
  D2AxisxScaleType = "manual".
  D2AXISXBEGIN = Xscale1 (0)
  D2AXISXEND = Xscale1 (1)
  D2AXISXORIGIN = Xscale1 (2)
  D2AXISXTICK = Xscale1 (3)
  D2AXISXMINITICK = Xscale1 (4)
  D2AxisXTxt = «»

  D2AxisXColor = 'black '.

  D2AxisXTickAuto = 1
  D2MTickLineWidth (1) = 0.1
  D2MTickLineType (1) = "solid".
  D2AxisXTickSize = 60
  D2AxisXTxtAutoCo = 0
  D2MTickColor = "red".
  Call GRAPHObjClose ("2DXAxis1_2")
  Call GraphObjNew("2D-Curve","New_Curve1")

  Call GraphObjOpen ("New_Curve1")

  D2CCHNX = "[1] / [1]" "

  D2CCHNY = "[1] / [2]" "

  D2CurveColor = "red".
  Call GraphObjClose ("New_Curve1")
  Call GRAPHObjClose ("grafic")

  Hi lerman,.

  Here is an edited version of your code that works on my computer.  A problem that I know that I fixed it was that your presentation of the STATE was in the name-oriented mode but you use the variables based on the number to assign it X and Y channels.  The execution of these commands in a loop FOR makes it much easier to debug the code and to avoid any annoyance at first.

  Brad Turpin
  Tiara Product Support Engineer

  National Instruments

• Problem with the file naming

  I can change my names of files successfully, mp3s to be precise, uniformly. Windows Explorer or Altap Salamander, there really is no problem with my file name.

  The problem starts to appear when I put my mp3s in my playlists (VLC, WMP, media player in my cell phone). The old file name keeps showing even though I have already changed the original/source file.
  For example, a song I downloaded bears the title "WTF * Chris Brown-int ' love ' so I changed it to 'Chris Brown - International Love' since that's how I name not all the thousands of my mp3s. But when I added the song to my playlist, the original title is one that appears and not the new. This case is the same with most of my Media Player.
  Is it possible for me to keep my desired/preferred file names when using the Media Player files? It's really so frustrating.

  Usually, media players like WMP does not show the name of the file of the song, but display the title and artist in the song tags (also known as metadata). To change these tags in WMP, add your songs to the library WMP library, right click on the tag you want to edit, and select Edit.

  You can also change the labels of the song with external tools such as Mp3tag.

• Problems with the update of IE8: "WindowsUpdate_0000000E" "WindowsUpdate_dt000"

  I had problems with Internet Explorer for a few months after an automatic update has been applied, and we lost power during the process.  I am now unable to use IE, just process dies immediately.  An update of the system is applied by the process of automatic update every time it tells me that it cannot update / day i.e., because a more recent version is already installed, as well as the error codes:

  "WindowsUpdate_0000000E" "WindowsUpdate_dt000"

  I was trying to roll back the PATCH or SP which was originally updated, but the Windows updates are not labeled as IE updates to Vista so have no idea which one it was (as I said it was a while ago).  I'm an avid user of FF but not having only not IE is annoying and constant updating errors are a pain.

  Thanks in advance.

  Hi MDRaven0223,

  a. do you get this error message during the download or installation of updates?
  b. what service pack is installed on our computer?
  c. give any KB number in particular?

  You need to uninstall Internet Explorer 8 in Windows Vista using the cleaning tool.

  1. remove Internet Explorer using windows Cleanup utility.
  After the installation of the Windows Cleanup utility, open Windows Clean Up Utility:
  1. Select Powerdesk that was installed by the Windows Installer in the Windows Installer CleanUp dialog box.
  2. to do this, select the programs you want in the list of products installed in the Windows Installer CleanUp dialog box.
  3. After you make this selection, the utility removes only Windows Installer configuration information related to these programs.
  Follow the link below to download the Windows Installer Cleanup utility:
  http://support.microsoft.com/default.aspx/kb/290301.

  You can try the following and check.
  2 reset the Windows Update components:
  To reset the Windows Update components automatically, click the fix it button or link.
  Click on run in the file download dialog box and follow the steps described in the fix it Wizard.
  http://support.Microsoft.com/kb/971058

  3 reinstall the Windows Installer
  To reinstall Windows Installer, rename the damaged Windows Installer files, and then reinstall the Windows Installer. To do this, follow these steps:
  1. start, run, type cmd in the Open box, and then click OK.
  2 type cd % windir%\system32, and then press ENTER.
  3. Type attrib - r s h dllcache and then press ENTER.
  4 type ren msi.dll msi.old, and then press ENTER.
  5. type ren msiexec.exe msiexec.old and then press ENTER.
  6 type ren msihnd.dll msihnd.old, and then press ENTER.
  7. Type exit and press ENTER.
  8. at the command prompt, type exit and press ENTER.
  9. click on start and then click on stop computer or Shut Down.
  10. Select the reboot option, and then click OK or click on restart.
  11. log on the computer.
  12. download and install the latest version of Windows Installer. For more information about how to obtain Windows Installer, click on the number below to view the article in the Microsoft Knowledge Base:
  893803 (http://support.microsoft.com/kb/893803/ ) Windows Installer 3.1 v2 (3.1.4000.2435) is available
  13. click on start and then click on stop computer or Shut Down.
  14 select the reboot option, and then click OK or click on restart.
   
  You can also install windows install 4.5 from the link below and try to install the Upgrade Advisor:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  5. now download the Internet Explorer 8 from the link below and install it.
  http://www.Microsoft.com/Windows/downloads/IE/getitnow.mspx

  I would also recommend to install the Windows Update Agent to manage the updates on your computer.
  6. Windows Update Agent
  Download and install the Windows Update Agent to manage updates for your computer.
  Follow the link below to download and install Windows Update Agent:
  http://support.Microsoft.com/kb/949104

  Similar has been discussed in this thread as well.
  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/3c25b5b6-3997-44B8-92e1-ad7494d1a167

  It will be useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Port: 25, secure (SSL): no, Server error: 530, error number: 0x800CCC78. How can I fix it? TWC tells me its a problem with Outlook.

  I receive the following message if poster when you send an email from Outlook Express 6 'the message couldn't. not sent because the server rejected the sender's e-mail address ' Server: ' smtp - server.twcny.rr.com', Protocol: SMTP, server response: ' 530 authentication is required before sending [R0107005] ', Port: 25, secure (SSL): no, Server error: 530, error number: 0x800CCC78.  How can I fix it? TWC tells me its a problem with Outlook.

  Technical issues do not belong in the forum Feedback response so I moved your post to the WIndows XP "Netwoking and online" Outlook Express forum where questions are handled.

  Outlook and Outlook Express are completely different products and are not related except for the names.

  The problem you describe product generally when you have not defined thte option to authenticate your outgoing SMTP server.  If you click on tools > accounts, select your account, then click Properties, you should see a Servers tab.  This tab is a check box labeled "my server requires authentication".  Check it out.  Then check the settings button to the right.  You'll see two radio buttons.  From the top, labeled 'Use same settings as my mail server outgoing' is generally the right to choose.

• Problems with Microsoft Lifecam HD-5001

  I installed the webcam above about 1 week ago and have since had problems with Skype-to-Skype calls.  Initially, I thought it was a problem with Skype, my Skype call today was ok, but the webcam turned itself, no matter how many times I turned it on!  I thought I'd try installing again, using the CD ROM that is labeled "microsoft LifeCam 3.0."  However, when I clicked on the Setup, a message came saying that a later version has already been installed?  Where should I go from here?  As you can probably, I'm a "techno-phobic", so the responses of a single syllable would be much appreciated? !!

  Hi Mitramonday,

  I suggest you to uninstall all previous versions of drivers installed for the Lifecam HD 5001 by following the steps below. Unplug the appliance before you uninstall.

  During the uninstallation, the device in the Device Manager, make sure that you follow the steps below:

  a. Click Start.

  b. access control panel > system > hardware > Device Manager.

  c. open Device Manager and expand the imaging device.

  d. right-click on the device Lifecam HD-5001 and uninstall the device.

  During the uninstallation of the device in Device Manager, make sure that you place a tick against 'delete the driver for this device '.

  Later, access the link below and download the latest drivers and firmware updates. Install it and check if it works.

  http://www.Microsoft.com/hardware/download/DownloadResult.aspx?category=ice&type=LifeCam&name=GNF-00001&OS=WVista_3264&lang=en

  Also check in the event viewer if there is no error code or error message is listed. See: how to view and manage the event logs in Event Viewer in Windows XP: http://support.microsoft.com/kb/308427

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Problems with Fuze + and new 32 GB Sandisk microSD card class 4. CAVEAT!

  I bought this card on Amazon.com and it was listed as a card MicroSDHC card SDSDQ - 032 G-A11M us retail package.

  This was announced as a class 2 card, but the card is labeled as a class 4 card and it's true that the write speed of this card on average 3.8 MB/sec.

  I have inserted in my rocket + and got the error that there is a file system error and to format the card in FAT32.  I formatted the card under Windows 7 times using a format formatting fast and Normal and tried to write on it and it works perfectly through the windows.

  I even did a full load test using H2Testw and he filled out the card and checked the files and it passes, so the map seems to work as expected.  In windows, in MSC mode, it works without problem.

  However, as soon as unplug you it from the computer the "rocket" does not recognize this.

  At first I thought that I had a card that is counterfeit, but doing some research forum revealed that Sandisk has been quietly replace existing map of class 2 with class 4 cards.  That's fine, but something happened because this card can not be read by the Fuze +.

  I have left a note with technical support and am about to do a live chat with the technicians there.  I hope they have a solution, or that the new firmware addresses this.

  This isn't a problem with the hardware or the card.  The card goes up and works perfectly under Windows so that inserted in the Fuze +, this seems to be a problem with the firmware as it will not mount this card.  I hope that Sandisk is a fix soon.  But for now I'm stuck.  I have a card that I can't come back because it is not bad for a player who did not recognize.

  Specifically, I bought the Sandisk card to go in my player Sansa because I thought they would have tested their own cards with their own products.  My disappointment is understandable.

  Any help anyone has would be great.

  Yes, they want to take a photo of the card and my phone is worse than mine.  I'll have to use camera for my daughter to get a good picture of the card.

  As I said, it seems that the map is read and write correctly.  I have same h2testw.exe rand on and filled the card and it passes.

  Weird stuff.

  Will be.

• Strange problems with the database

  Hello

  I just got my Fuze and am very happy with it; However, I am having a very strange problem with the database. I have a 16 GB sdhc card that I use with the "rocket" and there are about 4 songs on the card that will not play and have no information charge tag. Their tags appear in the tag browser (not the in the track information screen) as just an empty rectangle. Under the track information screen, sizes are listed as ~ 4000 mb. The songs will not play and I can not jump in front of one of these songs once they were loaded.

  At first, I suspected some kind of corruption of tag, so I set out that night to track down the problem. I removed the 16 GB card and reset the player. Then, I loaded one of the corrupt in the internal memory of the player. The track has been scanned and played correctly. Then, I removed the track of the internal memory and it loaded on another SDHC card. Yet once, everything worked correctly, so I knew that the card I was using was a kind of system files or physical problem. I returned the original 16 GB sdhc card in the reader and checked that the file was still unplayable, and then I plugged the "rocket" to my computer. I transferred the unplayable file on my computer and compared (with md5sum) to the original file, thinking that if there was the file system or physical corruption the copy of the map would be damaged. However, the files were equivalent.

  To make things even more interesting, I also have problems with the registration of the kind. I have some files tagged Genres such as 'Classic' and 'Rock '. In the list of the genre, I see this:

  C

  CL

  CLA

  CLAS

  Class

  Classic

  Classic

  Classica

  Classic

  Rock

  So, there is corruption on the kind of 'Classic' but not the kind of "Rock". Each of the substrings of 'Classic' contains only a few titles, with most of the other titles listed where they should be. I checked that the tracks are labeled correctly and in exactly the same way as the other tracks that do not have this problem.

  I am at a total loss about what to do, and I'd really appreciate any advice or suggestions. I use the current firmware, 2.03.31a and the songs in question are in Ogg Vorbis format.

  MM

  Thanks for your replies.

  I managed to find what may be the problem. Tracks that received corrupt tags had the names of total path with more than 256 characters. It seems that the driver internal fat32 the rocket uses vomits all over the place when the path name is too long. Before the "rocket", I got an iPod running rockbox tags with the same directory structure that I have on the "rocket", so I don't think that this restriction on the length of the path name is a limitation or requirement of the fat32 file system. Reduce the path corrected the problem with the files being unreadable.

  However, the problem with foires genres the rest. Looking at the files show that corruption, they all have a little information in tags. Most of the information is contained in the hashes I have files that identify them via musicbrainz. The limit on the total number of characters in the tags of the track includes the "rocket" label is not read or use?

  MM

• Why can't I save a file changed due to problems with the properties?

  Vista Home Premium 64-bit

  I sent myself a JPG file, taken by a camera in the email.

  I backed up, & then tried to turn it using Windows Photo Gallery.

  He says: 'cannot save this image due to a problem with the properties of the file.'.

  Sometimes (once, so far), it then says 'Changes to the labels, legend, side, or date taken could not be saved in this file.'.

  When I try the same thing in Windows Explorer, it says "you cannot rotate this image.  The file may be used or open in another program or file or folder can be read-onlly. ».

  Properties file shows the file read-only.

  Unchecking that and apply or OK has no effect.

  Ditto for the folder.

  But looking around, I see that (sometimes (?)) other records are also marked read-only, but are not their files.

  When I produce-> properties-> details-> ' properties delete and personal information "->" create a copy with all deleted properties ", he says: 'an error occurred when writing the property 'Altitude' in the file <....>.'.

  I can't find another way to try to remove all the ((maybe) offend them) properties.

  Hello PMH232!

  Thanks for the return of the response.  Below, I have included a few steps to try.  When you fill out these test in Windows Explorer and see if you can rotate the images.

  1. click on the start menu.
  2. click on computer.
  3. right click on the drive that gives you trouble.
  4. Select Properties.
  5. click on the Security tab.
  6. click on the Edit button where it says "to change permissions, click on change."
  7. in the "group or user names", click on the user you want to change.

  8. in the area 'Permissions for the users', click the checkbox to allow full control.
  9. click on ok.

  Please let us know status.