Black screen after hibernation - Satellite Pro A120 mode

Similar Questions

• Black screen after startup - Satellite A105-S4334

  It gives me black screen after the display of the logo just after the appearance of the cursor and nothing I can do except hold the button 'Disable' of windows, and then restart again, it shows the menu to make it start in safe mode... network mode... normally or lastest know good windows start...

  When he starts for the second time it works very well, he does it all the time and now I'm reinstalling windows for the 2nd time (factory State) any solution or explanation for that matter?

  Hello

  It is not easy to say why this is happening. Have you standing connected an external device, such as USB, printer or something similar?

• White screen after the Satellite Pro P200 display driver update

  I installed the latest display driver ATI Mobility Radeon HD2600 (8.432, on the site of Toshiba through Tempo) on my Satellite Pro P200 yesterday. Reboot, everything seems good as much as the screen "Please wait...". "Windows Vista professional, but instead of showing the page of connection I get an empty screen (with a mouse cursor that moves around as usual). All I can do at this point is to be able to, and I'm running out of ideas on how to move forward.

  Things I've tried:
  # start in safe mode, the video resolution or last known good configuration, result the same screen empty.
  # connect to the system using remote desktop (to disable the driver) is not possible because the system has not yet loaded the network drivers.
  # I can't go back to a restore point because Vista can't find (I did a manual after you install updates windows over a couple of days).
  I can run a system command line options of recovery and prefer to use it to disable the driver + if + I knew how before the use of the more radical options.

  A search on the web (http://www.google.co.uk/search?q=ati+catalyst+vista+blank+screen&hl=en&sa= N) reveals that this has happened on a wide range of laptops with
  previous versions of the driver, but none of the links I've looked at to give a solution which does not exist for me.

  I agree with Hairyfool, you who should solve problems using an external display. If no image appears, then something with the material might be.

  Please give some information about your situation...

  See you soon

• Qosmio G30-126 - black screen after the awakening of the mode standby

  Hello

  If I just put my Qosmio G30 - 126 mode (button or just close the housing cover) sleep it start back only with black screen. HD is being run but nothing else. I have to turn it off and start again with the start-up. Of course come screen with menu to speak of a problem... Don't have pictures. The resolution is minimum, I have to change.

  I'm please that reinstallation of the system, it's not what can solve problems.
  My question who will pay the time if she will not solve the problems, they said that it will be in all cases.

  Why I bought the warranty?

  PS. Admin confirms my messages...

  Post edited by: ADMIN

  Found this thread and I would like to share my knowledge with your
  I had a similar problem several months ago on my laptop with the XP operating system preinstalled.

  The MS patch KB917332 helped.

  [The monitor does not light when you move the mouse or press a key after you have configured the 'Power Options' settings on a Windows XP SP2 laptop | http://support.microsoft.com/kb/917332]

  See you soon

• Lenovo Ideapad Y700 17.3 ", Windows 10. Black screen after hibernation

  I use Windows 10, and it is updated. When I put my computer in hibernation, sometimes the screen is black when I start the pc again. Only solution is to reboot the pc. Is this a known issue? How can I fix it?

  Well, there are several questions about it. Suggesting the audio driver, the driver vga intel, but for me the key was reinstall all drivers with "intel" in their name

• Black screen after hibernation

  Hello
  I don't know how long exactly, but after my pc back to sleep, the screen is black, but the pc is running, I can hear the sound of the programs, brightness is very low and I can't change.
  Can someone please help me solve this problem?

  Hello

  Could be a problem with the display.

  Try to remove the battery and the AC adapter and keep the power button down for 30 seconds, then plug the adapter only and turn it on.

  See what happens and let me know.

  Thank you

• Black screen after the resumption of the mode standby

  Hello... I see other forums that this problem is not uncommon. But I have to solve if possible. I just bought a Lenovo ideapad mid - Oct. I have no virus and an active antivirus program running.

  I have Win 7 64-bit Home edition. When I try to wake my computer from sleep mode, it shows the "recovery of the windows" message and things seem to be going forward, but then the screen never goes black on my desktop with icons. The only way I can get to my office is to close and restart.

  Any ideas?

  In addition to suggestions of karena, try the following:

  Start your computer in safe mode, the screen is still blank.
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If you are able to log, and then execute the command SFC /SCANNOW. This will check and repair if necessary all of the critical Windows system files.

  Windows 7 - order SCANNOW SFC - System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• HP G60 laptop: black screen after sleep or hibernate Windows10

  Since upgrading from Windows 7 to Windows 10, the laptop displays a black screen after the sleep or hibernate modes.  The system seems to be commissioning (HDD, fan action), but no video.  The system boots normally cold trouble-free starting.  Never, there is this problem with Windows 7.

  Hi @Bobby876,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP G60 laptop and problems with the mode "sleep" after the update to Windows 10. I recommend to restore the default BIOS settings. You could restore the BIOS with this document by selecting the reload the default BIOS settings. In this way, it will look at the hardware installed on your laptop.

  You can try:

  In Device Manager, click the arrow

  next to display adapters to expand this category
  Right-click on the graph, and then select Update driver software if more than 1 graphic adapter do 1 at a time.
  Select search automatically for updated driver software.

  The laptop must find and automatically install the updated driver
  Once the installation is complete, restart your laptop.

  You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 10.  Please restart the laptop twice to make sure that all updates are completed!

  Please let me know how it goes.

  Thank you.

• Satellite Pro A120 - LCD black screen - Fine on external monitor - fine

  Hi, I have a headache with a Toshiba Satellite Pro A120 mojor. The screen began to move to the blackout at random times and happens more and more. It is not serious if W
  Jayindows has loaded or if I enter the bios, boot from the CD or leave it sitting waiting for me to select a boot device. More often than otherwise, it becomes black, but you can still see what needs to be on the screen, it is simply not at all turned to see clearly. The laptop itself still works very well because it works on an external monitor and makes the system beeps, cd turns etc.
  Have you tried the following:
  Setting of various parameters in the graphics properties and in the bios but makes no difference.
  It also becomes active again if I press FN + F5 to swap monitors but turns off after a few seconds.
  It is not overheating as it's been all night and still sometimes happens when starting Cold Stone.
  I tried to start with / without battery - no difference.
  I tried to start without the disk HARD - no difference.
  I tried to remove the battery by pressing power for 60 seconds, then add the battery and new starter - no difference in power.
  I could have sworn it is the inverter, but it does the same thing with an inverter I know works! do not think that it may be graphic because it works on an external monitor and turn off.
  I'm out of ideas and looking for a genius to fix it for me please!
  See you soon

  Hey Buddy,

  > It turns on but not at all to see clear
  This would mean that the FL inverter is faulty the FL inverter of the internal LCD display controls the backlight of the screen and if the isn t working FL inverter you can see a picture, but very very dark.

  It would be a logical explanation for your problem, because there must be something wrong with the laptop LCD if an external monitor is working properly. Also if it happens in the BIOS the problem is not software.

  In your case I contact an authorized service provider and ask the guys for help. They can check your laptop and this should be done. Here, we can only speculate and discuss the different possibilities because it s just a user forum. EPA has professional diagnostic tools and can order all Toshiba spare parts.

  Good luck! :)

• Black screen after login on Satellite L350-20 q (normal mode)

  My Satellite L350-20 q running Vista Basic.
  After the connection, which is normal, I'm going to the arrow then turning to a permanent black screen when I start in normal mode.
  In safe mode, I have a normal behavior and I can work. No malware present a Spybot report. But my Avast antivirus is doesn't seem to work in safe mode.
  Do you have an idea about this problem?

  A colleague advised me to update my graphics driver which is currently version 06/12/2008 Intel Corporation 7.15.10.I502 for Mobile Intel 4 series express chipset family. What is the URL and the name of the file to download the latest driver?

  Post edited by: normal mode of nigelle added to the title.

  On this virtual path, it is not easy to say what the problem is here. I don't know since when you have this strange problem but if possible, try to roll back the OS to an earlier time until she starts to happen. Use the System Restore tool to do this.

  I don't know what is the seriousness of this problem may be but and if the display driver installation can help. To be honest I don't think. My advice to you is to back up all your important data and install OS again using recovery image installation. After doing this you will have factory again and everything will be OK.

  By the way: I think that this old notebook is supported for Win7. A long time ago I ve installed Win7 32 bit on L300 and there HERE perfectly. Much better than the original Vista OS.

• Persistent black screen after startup on Satellite Pro A210 (PSAFHE)

  Need help, need advice on how to solve a persistant problem with black screen after put into initial service.

  Initially its fine but after the initial Toshiba of the screen just goes black, and the rest in this way, the PC stays on. Have you tried F8 options but all result in the same.

  Help please.

  Hello

  You can access the BIOS by pressing F2?
  Boot from a boot as Recovery DVD disk?

  If both is not possible, I'm afraid you have a serious hardware problem m.
  In this case, I get just speculate on the affected parts. Maybe his problem GPU or motherboard who knows

• Satellite Pro A120 - screen flickers when you activate another monitor

  I have a Satellite Pro A120, who has a problem with the computer screen to turn off image poor qulity (looks like interference) when you use the function key and activate a second monitor, but the image on the 2nd monitor is fine. I also discovered that the second monitor doesn't have to be physically connected to the main display having the problem, as soon as you activate the second screen the problem starts. However, as soon as you disable the second monitor, the computer screen looks perfect.

  I updated the BIOS of these two and the graphics driver, but the problem still persists.
  Any ideas?

  Why don't you tell us what portable external that you use?

  Have you tried to put the good resolution of monitor 1 (s notebook LCD) after the switch to the external display? I can imagine LCD becomes bad resolution and it must be changed.

  Please play with all the display settings. I used my cell phone so many times with different external screens and I was always able to configure this works well in any mode offered.

• Satellite Pro A120 - wallpaper flashed black

  Hello

  I have problems with my laptop. I have a toshiba satellite pro A120, but for the last two days, the bottom of my screen flashed black from time to time. Usually, it blinks for about a minute then works fine for a few minutes then flashes again etc.

  Here is a youtube link to a person having the same problem I'm having. No solution while

  http://www.YouTube.com/watch?v=U6-q0eZ8ox8&feature=player_embedded

  All ideas are welcome.

  Thanks in advance,

  Shaun.

  Hello

  I agree with the user above. First of all, please check this work around on cable, graphics card, etc.

  By the way: what display driver you have installed right now? Sometimes I read here in the forum that no Toshiba display drivers problems, so I recommend you to install the latest version of Toshiba directly.

  Last but not least with an external monitor, you can check where the problem is: either internal monitor or graphics card but I think that, in both cases, you need assistance from an authorized service provider to swap the part.

• Black screen after the mode 'sleep'

  My laptop never wakes fashion "Eve" and just keep with the dreaded black screen.

  If anyone has had this problem or have solutions?

  I am currently using a hardware, operating system.

  This message can help,

  http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/Pavilion-DV6-black-screen-after-sleep-mode/TD-p/527033

• Re: Satellite L675-10 t black screen after disassembly problem

  Hi all

  I recently had some problems with my L675-10T overheating, even when I was with a big fan of cooling for the games.

  I realized that the problem resulted from blocked exhaust and dust and it is why, after reading and watching the many tutorials, I opened my laptop computer successfully and all cleaned up.

  The temperature dropped to 20 c and I was happy.

  The next night, however, took my laptop and headed for the living room, and it will stop.
  Black screen and nothing passed. So I ran to the internet and found this solution, it worked btw.

  1. turn off your computer
  2. unplug all wires (including energy)
  3. disconnect the battery from the bottom of the computer.
  4 re - connect the power cable. (the battery should not be in the computer)
  5. turn power on. The screen works. Choose start windows normally. (if you get this screen)

  The thing is, the same thing happened to me this morning as well.
  Twice in 2 days and im a little worried I did something wrong during Assembly of the laptop or something. Any ideas? Or do I keep accountant with the above solution?
  Looks like a mess of power upwards of sorts.

  Thank you in advance.

  Hello

  I assume that this question has not happened before you have disassembled the laptop. Right?
  To be honest this similar issue happened to me to. The portable light not (black screen) after I'm entered in the mode 'sleep'. However, this happened only once

  It s hard to tell why this happened to you it of not impossible that you have damaged something for disassembled the procedure.

  However, the fact is that the warranty is not valid more because you opened the laptop. That is why any approach (especially parts replacement) to solve this problem would cost money.
  So ultimately it s your decision: a technician visit to downtown to see the pieces of equipment or keep your stay with the workaround mentioned above.