B560 - total crash of 10 to 7 Windows restore

Similar Questions

• I have a laptop acer 5552 on windows edition Home premium... .He crashed and a friend used windows 7 ultimate to run again how to make Home Premium return on it

  I have a laptop acer 5552 on windows edition Home premium... .He crashed and a friend used Windows 7 ultimate get back to work how to make Home Premium back on that I do not have the disk backup I lost it

  Hello

  • What were the changes made before the problem occurred?
  • What happens when you start you computer?
  • Are you able to boot to the desktop?
  • You receive an error message?
  • If your friend has installed Windows 7 ultimate or just fixed the crash problem - was - it own installation\custom?
  • What version of Windows are you using?
  • When you say "windows home premium" are you referring to Windows Vista or Windows 7?

  If you are able to boot to the desktop, you can check the version of Windows.

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running
  Response with more information.
  See also:
  http://support.Microsoft.com/kb/555375

• "When I try to load the game Empire Total War I have a Microsoft window error ' Empire: Total War has stopped working"

  Original title: when I try to load the game Empire Total War I have a Microsoft window error

  Empire: Total War has stopped working

  A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
  But when I do updates on the game and it still shows the error on the Microsoft Windows error. Also, when he is on the main site of most of the people have problems on this game I noticed just last night so can you help me and I have try all the sites to see if it works try reinstalling it and what I think.

  Hello

  1 did you recent hardware or software changes to your computer before this problem?
  2 have you tried the troubleshooting steps to solve the problem?

  I suggest you try the steps and check them off below.

  Step 1: Update the video card driver.
  Reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  Step 2: Download and install the latest version of DirectX.

  Reference:
  How to download and install DirectX
  http://support.Microsoft.com/kb/179113

  Step 3: Check if the problem persists in the clean boot state.

  Put your boot system helps determine if third-party applications or startup items are causing the problem.

  Try the procedure described in step 1 in the section below to put your computer in clean boot mode.

  http://support.Microsoft.com/kb/929135

  Step 4: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:

  a. Click Start.
  (b) in the search box type eventvwr.msc, and then on enter.
  c. now, click Application in the event viewer (local).
  d. now, looking for event log on the right side of the event viewer window.

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  You can also try contacting the seller game to help on this issue.
  http://forums.Sega.com/

  I hope this helps.

• Hello. Hard drive of my computer totally crashed & I had to wipe my hard drive. I wasn't able to log out of my apps for the creation of clouds which my wife has 2 licenses for us. Can someone please explain the process to re download these apps please

  Hello. Hard drive of my computer totally crashed & I had to wipe my hard drive. I wasn't able to log out of my apps for the creation of clouds which my wife has 2 licenses for us. Can someone please explain the process to re download these apps please? Thank you..

  Hello

  Please refer to the help documents below to download the application Adobe CC:

  Creative cloud to desktop

  Download, install, update or uninstall applications

  Kind regards

  Sheena

• At the office, InDesign works very well. At home, it totally crashes and all I get is the reel spinning death everytime I go near "file." Is there a solution? I can open a previous file or start a new popup tutorial, but if I try to approach

  At the office, InDesign works very well. At home, it totally crashes and all I get is the reel spinning death everytime I go near "file." Is there a solution? I can open a previous file or start a new popup tutorial, but if I try to get close to 'File' to place an image, he out craps. Is there a solution?

  reset your preferences -: https://forums.adobe.com/thread/526990

• My computer crash and I already reinstall window and I need to reinstall the cloud adobe creative

  My computer crash and I already reinstall window and I need to reinstall the cloud adobe creative

  Smartofficesolutions4u and Camille C. Laflamme please see CC help | Install, update, or uninstall applications for more information on how to install the Adobe Creative provided with your membership application.

• First Pro CC crashes on startup after upgrading Windows 8.1. All solutions?

  First Pro CC crashes on startup after upgrading Windows 8.1. All solutions?

  It was working fine until I updated my operating system. I tried to reinstall the software. I tried to update my graphic drivers.

  Hi P.Ava,

  Please also try to delete / disable any antivirus or firewall software installed on the system.

  Please update if it works.

  Thank you

  Sandeep

• Adobe Bridge CS3 crashes when loading in my Windows 7 workstation.

  Adobe Bridge CS3 crashes when loading in my Windows 7 workstation.
  I've recently completely removed, disabled and reinstalled all my Master Collection Adobe Creative Suite CS3 to fix some problems with another application in the suite, and now I'm surprised bridge continues to fail. In my mobile workstation, the same software (bridge) uses to run.

  I tried to run Bridge under several compatibility modes. All have failed.

  Is there any bug to know, that I should be aware of? Any difficulty?

  Is this a common problem?

  Have you tried to reset the preferences?  Hold down the CTRL key and launch Bridge.  You will get a window to reset.

  By accident, it means that the computer has to be reset?  It freezes?  Error messages?

  Not enough information in other words.

• S3: how he resolved to crash prob. -While in Windows update

  First time it happened, I brought the S3 to the Acer Singapore service center.  Problem: the unit would not start.  The service of man has done something on the spot and he has started the last Windows (restore?) before the update that hung from the system. If no service has been performed.

  Recently, the system has been updated (update even) and again hung the system.  Yet when I tried to restart and it couldn't boot.

  Question: How the military managed to restart the system returns to the last without usb restore point.  I want to restart at the last job windows and backup important files before you perform the reset of factory or something.

  It probably started tap F8 as soon as it hits the power and scrolls to the last known good boot.

• Firefox crashes when loading; He tries to restore a previous session. Cannot retrieve the crash report.

  When I try to open Firefox, I briefly see the program trying to open - address line says "restore session". Then it crashes. I get a screen saying 'We are sorry' 'Firefox has a problem and crashed. We will try to restore your tabs and windows when it restarts.

  This has happened

  Each time Firefox opened

  Today. I had received a message that I needed to restart my system. I think it was to install some type of updates.

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; GTB6.5; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30729; NET4.0C)

  Apparently, I have solved my problem. I uninstalled Firefox 3.6.6 keeping all customizations and then reinstalled. When it opened, it gave me a screen saying he was embarrassed that he couldn't restore my web pages, but it gave me an option to start a new session. When I did, it opened normally and now seems to work fine.

• Windows restores to halfway through the adode update. Windows xp

  Windows restores to halfway through the update of adode 9.4.7. Remove it and tried to download 10. ? and did the same thing.

  Hi JoeHughes626,

  ·         You receive an error message or error code?

  ·         The issue is only with a specific Windows Update?

  ·         Did you do changes on the computer before the show?

  I suggest you to consult the article in the Microsoft Knowledge Base and check if the problem still persists.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Let us know if that helps.

• Default configuration of the Windows, restore features changes, do not turn off your computer error/loop - failed to get on the desktop

  Hi, I restored my Toshiba laptop yesterday afternoon, this morning, when I turned it on it started to configure the updates and let him be like that so I made breakfast.

  When I came back, I found this saying ' failure set features Windows restore changes do not turn off your computer ' its been like that for about 10 hours.

  I wonder how can I fix? I tried it turn on and turn off, but the same problem persists.

  It came with 8 Windows preinstalled thereforeI don't have the installation disk and I don't have access to the desktop

  Any solution please?

  Thank you

  Hello

  I'll get you the link and restore your computer to a previous working state.

  http://support.Microsoft.com/kb/949358/en-us

  Please reply with the status.

• Installation of updates Windows comes to approximately 96% complete, then said: "failed to update Windows, restore configuration changes.

  I just bought an Acer Aspire 5600U all-in-one computer. When attempting to install Windows updates, sometimes about 96% complete, then said: "failed to update Windows, restore configuration changes. How to solve this problem?

  Original title: Windows updates

  Hello

  Please, try to reset components Windows Update as mentioned here and see if this helps:
  http://www.kapilarya.com/fix-error-80070570-Windows-Update-encountered-an-unknown-error-some-updates-were-not-installed
  Hope this helps, good luck :)

• A system totally crashed after downloading the update of windows 7 (from VHP) reloaded vista starting the Dell restore partition and reattach the requirements. Now, how can I restart upgrade

  OK, here's the deal... the Dell laptop had a recurring software validation fixed an error that I couldn't keep. I would fix it, Vista should go out and update itself and then I would reboot and bang, back right to the error again, I decided to scrap Vista and install W7. I corrected the error again once restarted in a stable Outlook, downloaded files of Windows 7 upgrade and then discovered that the netframework wasn't right, so I downloaded this solution, am to halfway through it and got a system error. HA! I'll just copy this download upgrade of the window on a USB key, hover over all my personal files on the usb drive, and reinstall Vista from the Dell partition, which I did. Then, I updated all the stuff with the Advisor to upgrade of windows, is gone in Windows 7 upgrade file I moved it to the USB and realized that this point in time, I was an asshole. What a breakthrough!  OK, now how to restart the upgrade process. I paid the money, done the downloads, message, so my hands, discussed and done all the other stuff I've done since the upgrade of Windows 3.1 (each time). Now what...

  First I would contact the people who sold you download and see if they will send again free of charge - explain the problem.  I guess you still have the product key, they have sent you that shouldn't be a problem (it will work with any download the same version of Windows7).

  Then run Windows7 Upgrade Advisor to see if your system can handle Windows7 or if she need for software or material removed or updgraded: http://www.microsoft.com/windows/windows-7/get/upgrade-advisor.aspx.  Follow the instructions he gives as a result of the program (in fact, you should do this first - then you can deal with the download).

  After that, you need to further questions in the Windows7 Forums: http://social.answers.microsoft.com/Forums/en-US/w7install/threads where people who specialize in the installation and upgrade to Windows7 will be more than happy to help you in the process.  This is a forum for Vista, and you need to talk to experts in Windows7.

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Rome Total War (various expansion packs) and Windows 7 (64-bit)

  I'm a "bit of a pickle" as Windows 7 (64-bit) and Rome Total War, and if it should run OK.

  The game worked fine on my old XP machine but seems hit and Miss on W7 (64), esp, some of the expansion packs.

  I have the old RTW Activision and who installs OK and usually starts and runs OK. However, from time to time it will crash. I can play for hours sometimes and its OK, others only for a few minutes. So I tried the RTW patches to get the game to load 1.3. This is the first weird problem, the patch seems to only load in "Program files" and not "program files (x 86)" but the game loaded in both. Q1 - the patch should load in both?

  Q2 what version should I try to run RTW?, one in program files, or the one in program files (x 86)?

  Q3 who, if all the expansion packs should run? I have RTW - Barbarian Invasion (Sega) and RTW - Alexander (Sega/White Label). Barbarian Invasion appears to load but does not work (the first of all he missed mss32.dll, that I found and copied, but then) he said that he could not start Audio 3d. Alexander says that he cannot see the RomeTW.exe (1.5 or 1.6) she needs to find prior to installation. I tried to install the 1.5 patch, but he always says the same thing even if the patch supposed to install OK. Is this related to the query of the 1.3 patch above I wonder?

  The versions of the patches I have are old, obtained for the XP machine. Y at - it versions of specific patch of W7 (64) should I use?

  I looked at http://www.microsoft.com/windows/compatibility/windows-7/en-us/Search.aspx?type=Software&s=rome&os=64-bit, but this isn't much help (unless Ive missed something) as I cannot see RTW (Activision) at all and it seems to suggest RTW Alexander (Sega) should be OK (but no mention of the white label verson)

  Sorry if this all sounds a bit long and twisted, but I would get at least some of the games properly functioning and stable and for the moment, I can't.

  If not, is there a guide known on the www somewhere to explain how to install on W7 (64) and whose patches to load and when?

  Thank you

  EDIT - is something I just noticed, if I put the CD back to work in the W7 machine (64) and launch the game from the context menu, it also fails to start with "cannot initialize 3D audio" (or purpose). I was running the game from a shortcut that was created in the W7 boot menu, which goes from the version of files (x 86) program. And this shortcut, it starts and plays but sometimes crashes.

  Hey I know this is an old question but I just had the same problem. the problem is he's leaving moved in the x 86 folder programs and some of the patches there too. If all you have to do is to copy and merge all this program (86) in the folder program files (64-bit).

  Play now :) fun