back & recovery

Similar Questions

• How to make shortcut to system back recovery data in my files

  Windows 7

  HP Pavilion dv5

  Apparently my hard drive crashed because I wasn't able to get the automatic repair of HP to work so I backed up all my files... photos, documents, etc. in first (to 36 DVD to be exact), then he did a thorough cleaning of my hard drive. I was able to run RESTORE and put the data on my computer, but I don't know how to put the data back where it belongs... i. e PHOTOGRAPHS in the IMAGES and DOCUMENTS in DOCUMENTS, etc. The 'shortened to system recovery' lies on my desk... (2014 05-26-142444, and properties shows 146 GB of data), but when I click on this file, I see the C drive, I click again and see the different folders on drive C... i. e $Recyle.Bin, AdwCleaner, HP, Program Files, etc etc.

  I don't know what to do from here... I hope that someone out there knows what to do and can help me.

  You must copy the files from the shortcut in their original files in your user directory.

  A lady was having the same issues here.

  http://h30434.www3.HP.com/T5/desktop-operating-systems-software-recovery/restore-files/m-p/3948670

• Can satellite L300 - I start BACK recovery?

  Hi all, is it possible to start the recovery of a L300 DOS image?

  The reason why I ask, I have a laptop that does not start in a form in any way. If put a Vista disk and go to the DOS prompt I see the partition recovery & files, so is it possible or what are my options?

  Thanks in advance
  Best regards, Ciaran

  >, is it possible to start the recovery of a L300 DOS image?
  I doubt that this is possible

  What you could do is to start the Toshiba HDD recovery procedure by pressing the F8 key.
  A start menu should appear, then you should choose the first option called fix my computer.
  Then it should open a new window with an option called Toshiba recovery.
  Choose that and usually drive HARD recovery must begin.

  But this procedure is possible only if the second partition and HARD disk recovery file has not changed

• Question about drive HARD on Satellite L300 recovery

  Buy laptop 3 months ago, my son's homework top (40 pages). Laptop has suddenly stopped working. When I try to boot to the top he tries to boot the laptop into repair mode, load files, will load vista then I do gray screen saying (system recovery options) installed program cannot start turn off computer.

  Through each f8 routine and only interest is to disable automatic restart in the event of system failure where I get the error message: Stop oxoooooo24 (ox00190444, ox85a6bdeo, oxc0000102, 0x00000000).

  Didn't create Toshiba Recovery disk called received set loaded file, it comes finally to a point where them continue it will erase all data on disk. Which is what I don't want. Then takes the disc, but it had loaded enough drivers to allow me to take a look in the back. When I look for drive C, return with an unreadable messagesaying. When I look in the D drive and there are files including a saying HARD drive recovery. (I guess that vista automatically disk partitions)

  In all cases any suggestions? There is a single file that I need, which is a document works (wps). Is there anyway I can retrieve the d ' training in HARD drive through back recovery? any suggestions?
  If I run the recovery disk it delete both partitions or just work on C:, then through D: I maybee able to recover the document?

  Hello

  As I see you have tested all the options using F8.
  This means that you have tested safe mode?
  You can start a computer laptop in safe mode?

  If your work is saved on partition D, you can start recovery facility (F8 fix my computer) and Vista will install again, but all the data saved on the D partition will be there again.
  -When you use the recovery disk - http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm C partition will be deleted only.
  -When you use recovery DVD will be formatted the whole HARD disk.

• Presario CQ 57-339wm: no sound from speakers, Driver date, don't watch working properly?

  My Compaq Presario CQ57-339WM running 64-bit Windows 7 has no sound coming from the built-in speakers.  The headphone jack works with headphones, but the built-in speakers have no sound.  I just downloaded the driver update and still no sound.  When I check the speakers in the Manager, it indicates that the device is functioning properly.  Short of redo the original back recovery point system does anyone have any suggestions of how I can check to see if the problem is in the speakers or with the card or what?  I looked on the boards here, but nothing seemed to fit my problem exactly if I'd appreciate any help.  Thanks in advance.

  Hi @cnickels,

  Welcome to the HP Forums!

  It's a great place to find answers and suggestions!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

  Learn how to post and more

  I understand that you have the sound through your headphones, but not the internal speakers.  When you checked the Device Manager it says it works.

  Here is the link for HP laptops - no sound on speakers (Windows 7) that should help you.

  To say thank you for the answer, click on the thumbs up icon below.

  If this allows a resolution please let other posters know in choosing the solution provided.

  Good luck and have a wonderful weekend!

• I erased from my hard drive and can not use Win 7

  I tried to delete Grub/Ubuntu and eventually remove Win 7. At least it will not start. And if I use my repair disc, that's not restore my Win 7. I get an error in the hard drive is bad, or the MBR needs to be reset. I did it today. When I insurt my repair disc, need me toSystem back recovery opens. I tired the startup, no change repair. I tried the command prompt to reset the MBR. Unknown if changed or reset. 4 discs recovery cannot start, and if I use the recovery management it does not to click on any key. But the return to the System Recovery Options.

  I have tried everything I know not taken to the place where I bought the computer and see if they can fix it. I don't know what else to try here. I think I made things worse as I went before trying to remove Ubuntu and Grub and install win 7 back. I don't know if I have double wall on the hard drive, or just Chantilly it clean of all hidden, and no hidden information.

  Can anyone suggest how I could come back just by using Win 7. Some have suggested to do a full format of the drive. But I can't get on the hard drive to do. And I don't know if my repair records and Win 7 recovery does not start in any case. In order to get the system recovery option, I have to open the start menu and click on the DVD-ROM. The repair disk or the recovery disks will start or put a pressure on any key page before opening the repair disk, and the recovery disks will not yet be opened then. Any help would be greatly welcomed at this stage.

  If you have your windows recovery disk and a Ubuntu live CD, boot from Ubuntu, open gparted and completely erase your HARD drive.

  then turn the power off, insert your windows recovery disk, press F12 to start and choose to start form DVD and try to install. the disc of recovery need a HDD completely wiped to work (only simple raw data)

• While the iCloud recovery backup... continue to go back to the screen HELLO?

  I am currently trying to reactivate an iPhone with the last backup to iCloud.

  The iPhone asked me for the first update to iOS 9.3.1 (because the previous backup on previous iPhone did in 9.3.1 I guess... (and although this new iPhone showed 9.3.1!...)

  Now I'm gone screen HOLA-HELLO, entered a network wi - fi available, connected with my operator (with the right SIM card of course - phone work - test received call).

  However, now, so that this treatment with the recovery of backup, when I let the phone go to the screensaver, it keeps going back to the screen HELLO... Is * normal *?  Or should I suspect a problem with the iPhone 5?

  (Just bought from a dealer - it is seller-renovated, reliable source)

  Thank you

  Rob

  While iCloud restoration takes time - given the dependencies on your WiFi and the amount of content to download - it should not restart loop like this

  Restore your device from an iCloud or iTunes backup - Apple Support

• Recovery partition into conflict with Norton Go Back

  Hi - I've recently installed work of system of norton that includes Go Back, and from the hard drive on my Satellite light is working overtime, causing the fan to be almost full-time. I contacted Symantec who said that if my Toshiba has a preinstalled recovery partition it would be not possible to run Go Back on top of it. Can anyone tell if Tosh laptop computers have a pre-installed recovery partition? Does anyone else have this problem? Or is it maybe this recovery software as round-trip causes additional work on the poor old hard drive and this activity is quite normal. I'm tempted to just disable the round trip.
  Thank you
  Matt

  Hello Matt

  First of all, it will be interesting to know what model of laptop you have. Going back is not known to me but as far as I know on Toshiba laptop, there are partition created with Microsoft as usual installations CD and I don t understand the explanation of Symantec.

• Satellite Pro L300 - can I use the recovery disc back Vista?

  On my computer I am dual boot Windows 7 and Windows Vista.
  Could get rid of Vista and then later could use the recoevery drive to recover vista?

  PS I know it erases the entire hard drive

  Hello

  Of course, you can use the Toshiba Recovery disk to go back to Vista. It contains a picture of the factory settings and this means that the Vista preinstalled with all the drivers and tools.

  But note that the recovery disc erase the drive HARD integer for you should backup your data first before using the recovery disk.

  Good bye

• Satellite M300 - how do I back up the data before using the recovery disk

  Hello everyone,

  Today, I closed my laptop Toshiba Satellite M300.
  Just after a few seconds, it automatically in service and reported some "boot error".

  She also suggested I put on the recovery CD. When I put the CD, nothing happened.
  After awhile, I read the instructions in the CD cover that says that I have to hold the C button and it will start the recovery process.

  How the process goes, the system told me that all the files that I had in the computer would be removed.
  Is it possible how I could back up my documents before as I recover my Vista?

  I would be very grateful if someone could help me!

  Sincerely,

  Milan

  Hello

  If I understand correctly, you are not able to boot into the Windows operating system; According to the normal starting procedure or by using safe mode. Is this good?

  If Yes, then I don't see many options to get access to the files on the HARD drive.
  What you could try is to remove the HARD drive and use an external USB 2.5 enclosure to connect the HARD drive on another computer.
  Then you could test whether it is possible to access the HARD disk and save the data.

  The Toshiba Recovery disk does not any option that allows you to save the data, the drive formats the HARD drive and erases all partitions.

• IPad disabled with thousands of pictures of children that are not backed up with iTunes or icloud. Recommendations for the recovery of photos please?

  IPad disabled with thousands of pictures of children that are not backed up with iTunes or icloud. Recommendations for the recovery of photos please?

  Sorry, but if your device is disabled and you have no backup, then you won't be able to save the data on the device:

  https://support.Apple.com/en-us/HT204306

  You should back up your device regularly to iCloud or import your photos to an application on your computer. Otherwise, you will be risking losing those photos. If your device has been lost, stolen, or crushed by your car, you'd be in the same situation. Really sorry for your photos.

  Good luck

  GB

• Back to the recovery partition after installing Windows 10

  Trying without much success to help a friend with a Lenovo ideacentre B310.

  He had apparently been does not work properly under its native operating system Windows 7 and the owner has tried the free update of Windows 10. The cmnputer has not since then start beyond the blue logo of the Windows 10 flag.

  I tried a reset by using the F11 key which got through the whole process of restoration and reinstallation of probably Windows 10 but then frozen 100%.

  I have since installed successfully from a WIN Pro 10 CD, but it's understandable without a free license has been applied as it was a clean install.

  What I want to know, it's the recovery on the still Partition PC contains the original OS? If this how I start and recover to factory condition of the PC having in mind that the PC is currently the trial version of WIN 10 with a limited number of days of use before a product key must be purchased.

  Data loss is not a problem, I just need to go back to factory State and then move on from that.

  Problem all sorted. I didn't realize that you could install the applicable version of REMPORTER 10 of the tool of creation of media these days and use the product key from the COA of WIN 7.

  I'm assuming that I come back to a working version of WIN 7 before I could then upgrade to a licensed version of WIN 10.

  Thanks for all the help.

• HP15 ab029tx: window update 10 problems should return to 8.1 windows using recovery and come back later

  My computer hp 15ab029tx laptop came pre-installed with win 8.1. I've recently upgraded to win 10. However, after upgrading, I found the following issues. I installed the latest version of the bios and all drivers are up to date on hp site.

  the problems are.

  1. edge flicker browser. Sometimes I use chrome so ok.

  2. autonomy is by 2 hours earlier, that's around 3: 00.

  3. laptop gets very hot. I found coolsense does not. There is no setting of tdp in the power profile. TDP settings was present in windows 8.1.event viewer is full of errors of health active hp, intel dptf, etc.

  error dptf Intel

  Intel (r) platform dynamic and thermal environment: Requested (8.1.10600.150) TYPE: ERROR

  DPTF Build Version: 8.1.10600.150

  DPTF Build Date: June 26, 2015 11:46:12

  Source file:...... \.. \.. \Sources\Policies\PolicyLib\PolicyBase.cpp @ line 693

  Function: PolicyBase::releaseControlofOsc

  Message: Impossible to release the OSC: failure when executing _OSC:

  DPTF Build Version: 8.1.10600.150

  DPTF Build Date: June 26, 2015 11:46:12

  Source file:...... \.. \Sources\Manager\EsifServices.cpp @ line 473

  The enforcement function: EsifServices:rimitiveExecuteSet

  Message: Error returned by the function interface IBSE services call

  Member: NoParticipant

  Domain: NoDomain

  IBSE Primitive: SET_OPERATING_SYSTEM_CAPABILITIES [93]

  Instance of IBSE: 255

  IBSE return code: ESIF_E_UNSUPPORTED_ACTION_TYPE [1202]

  　

  Policy: Policy critical [0]

  Active health HP errors

  COM exception running a command GET Casl EmbeddedController.AuditLog.JSON = return value from the BIOS, which indicates a value of invalid command. : one or more arguments are invalid (Exception from HRESULT: 0 x 80000003)

  4. several fonts of applications is blurred. I use 125% recommended implemented nationally as a 1080 p screen. all drivers intel & nvidia graphics are more recent.

  5. after sleep / standby wireless works irregularly unless I turn it on / off manually & special keys on the keyboard do not work until I restart.

  6. portable seems overall gloomy. (seems to be however performance tests indicate otherwise). Apps to take longer to open.

  So should I go back to earn 8.1 using recovery and wait for more late say 1 year when all bios and driver problems are sorted.

  My main problem is the short battery life and the laptop heats up.

  Concerning

  That's what I'd do - return to Win8.1.

  I have a laptop HP Dv6 Win7 running and the upgrade of Win10 has been a total disaster.  I restored using Win7 HP recovery media.  I'd rather have a BONE more old where everything works, only a new operating system where things do NOT work.

  As to wait a year, the FREE upgrade expires end of August 2016 - so after that, if you still want to upgrade, you will need to purchase a license - and, unlike with previous versions of OS, MS said nothing about the price for upgrade license, or even if such a license will be available then.

• Restore the files backed up before recovery

  Had a problem with my Pavilion 6550z and to make a recovery.  Choose "Backup" my files before recovery and he has saved 4 DVDs of data.  Now I have the installer and win7 back.  But do not know how to restore my files?  I tried going into Control Panel and choose the backup, but it won't let me choose the DVD player.

  Any suggestions on how to restore my files?  Generic interested Email and pictures?

  Thank you!

  Hello

  Insert the DVD1 backup in the CD/DVD drive. Click Start-> computer-right click on the CD/DVD drive online, click Explore. It shows Recovery Manager (Application settings and two files) and a few files with. WIM extension.

  Double-click the file Recovery Manager (Application), it begins to restore the files for the user accounts.

  You need to search for files to find their exact location (start-> search, looking for Images, type. (JPG).

• How can I restore my empowering technology from acer asire Home premium back to factory with a recovery disk? All the factory settings have been destroyed, and windows vista ultimate sp1 has been installed on my computer.

  I have an acer aspire 4720z / with windows vista home premium / with the enabling technology / processor intel pentium dual core. I think I downloaded a program limewire lennex, it was suppose to be something else. Somehow that he closed my computor, luckly my cuzin was able to download windows vista ultimate SP1 64 2007 multimedia content on my laptop so that I can at least use MY COMP. But I think I like the version that is installed on my comp.better to the ultimate version on my comp.now, it does not seem as before prefome. Some things on my computer laptop don't prop wk. What should I do, go back to my version Home premium of moose? If so how to do that? I don't have a home premium recovery disc. I tried to install the updates of windows SP2 64 thought repairs that would set back 2 the origonal but settings it na not or at least update the ultimate version do you think I should do.

  If you have downloaded Vista Ultimate and not bought, you use pirate software.

  You will receive NO Support for pirated software.

  If this does not work, contact Acer:

  http://www.acerpanam.com/Synapse/forms/portal20.cfm?RecordID=853&formid=3390&website=AcerPanAm.com&siteid=7117&words=all&keywords=&areaid=2

  Acer eRecovery made

   

  1. on the Acer splash screen, you can press Alt and F10 (at the same time press F2 to enter the BIOS) to make it appear a version BACK style eRecovery.

  ·        The unit is able to reload Windows from this mode faster then CD.

  ·        The default password is 000000 (6 zeros) and it is shown when you are prompted for the password.

  ·        Users are able to change the password in this mode for eRecovery only.

  ·        The system can retrieve the hidden on the hard disk (partition PQService) image or a CD/DVD media.

  ·        It is possible to reload the factory CD/DVD style or snapshots that creates the eRecovery Windows version.

  2. in Windows, there are 3 ways to access eRecovery functionality.

  ·        Press Alt and F10

  ·        Open Acer eManager and then double-click eRecovery.

  ·        When a system is new it should automatically open this application and invite you to do the recovery media.

  3. the Windows version of the eRecovery program is stronger then the Dos Version. Below you will find the various features of the Windows version:

  Recovery settings: create backup files and change password

  ·        Picture of the backup snapshot (create a disk image of your system configuration)

  1. the system is able to make a CD/DVD image of the current state of mobile software including customer programs installed.

  2. This CD/DVD is usable in Windows and DOS of the program version.

  3. the drive should start, but isn't always.

  4 when a snapshot is in fact the image is on the D: partition and then can be burned to disc if eRecovery is said to.

  ·        Burn the Image to disc (create a backup disk)

  1. you can create 3-7 CD or DVD 1-2 such as those that were sent with the units before eRecovery.

  2. the serious CD are equal in usage to the system recovery CD and CD

  ·        Remove data from backup image of capture instant user (if available)

  1. This is how delete you the snapshot on the D: partition images

  ·        Password: (change the eRecovery password)

  1. measures: restore your system using an existing backup file or restore the default configuration in your system factory.

  2 backup copy using one of the snapshots has been filed or the original image on the D: partition.

  4. made eRecovery

  ·        When the hard drive is replaced the system loses its characteristics eRecovery. These features are on the hard drive and cannot be reinstalled.

  ·        When reinstalling from the CD/DVD's you will lose the eRecovery program but the DOS version can still function, as if uninstalled, you can not reinstall.

  ·        eRecovery uses Ghost (as well as the use of our recovery CD) to create snapshot images.

  ·        If the PQService partition is removed using fdisk or a utility under Windows, you may need to reinstall Windows.

  ·        If the system is recharged using the DOS version you retain the eRecovery feature

  Mick Murphy - Microsoft partner