CyberLink Webcam cannot find a built-in webcam

Similar Questions

• Windows 8 cannot find the built-in webcam?

  Hello

  I bought recently are about a week, my laptop Alienware M18x. and the integrated webcam can be found.

  The first day when buying it, it worked (the webcam to take a photo of profile), but since then, he has not. My computer is running on Windows 8, so when I select the Webcam app, it says "Connect a camera."

  I also tried different ways to have my camera works (for example trying to use it on Skype and things like that), they all say that I have no webcam plugged in, when it's a built-in Web camera.
  So, how can I do so that my webcam can be found? I would like to talk to my friends on Skype with him soon!
  Thank you!

  Yes.

  Number of hours of frustration later!
  Top of page under the devices hidden from view.
  Click on this.
  Should see here imaging devices.

  Good luck!

• Error: Code 43; Windows has stopped this device because it has reported a problem whiel trying to use Cyberlink Webcam

  Title: cannot activate cyberlink webcam

  My cyberlink webcam was working fine until today. It will not turn on. After you apply the troubleshooting suggestions, I received a reply as follows: 'windows has stopped this device because it has reported a problem. (code 43) What is - this and how to solve my problem. I have a HP Pavilion g6. Help, please!

  Hello

  -Did you do changes on the computer before this problem?
  -What is the operating system installed on your computer?
   
  The error code you get is due to one of the engines that controlling the device notified the operating system that the device has failed in some way.
  Method 1: Run the Microsoft FIXIT from the link and if the problem persists.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us
   
  Method 2: Uninstall and reinstall the USB controllers
  You can try to uninstall the drivers and also scan for any hardware changes in Device Manager.
  (a) open Device Manager by clicking Start , and then type Device Manager.
  (b) expand the Controllers of Bus USB section by clicking on the '+' sign.
  (c) Uninstall each of the devices under the USB Controller section by right-clicking on each one, and then click Uninstall.
  (d) close the Device Manager and restart the computer.
  Windows RE-automatically install the USB controllers in your computer, without you having to do anything further. Your computer is now running properly USB devices.
  For reference:
  Updated a hardware driver that is not working properly
  http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly
  
  Method 3: If the problem persists, I suggest you to follow the steps from the link and check if it helps.
  Code 43: Windows has stopped this device because it has reported problems
  http://TechNet.Microsoft.com/en-us/library/cc725873 (WS.10) .aspx
   
  Hope this information helps.

• CyberLink webcam will suddenly open only in Vista basic theme on my laptop

  CyberLink webcam will suddenly open only in basics of Vista on my laptop which is Vista Home Premium. Display is too big for access keys at the top of the screen. Any ideas? Hanks

  Hello

  ·         Do you get the Aero theme once you close the Cyber link webcam application?

  This occurs generally if the graphics card does not have the latest drivers installed or the graphics card is not able to perform the function Aero once initiated another application that uses a high amount of graphics.

  I suggest you to download the last set of video card drivers on the website of the manufacturer or check the link below to update drivers in Windows Vista.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  If it doesn't then you need to maybe buy a new graphics card and install on the system for better graphics performance.

• CyberLink webcam no shows in the list programs.

  Original title: webcam

  My cyberlink webcam does not appear in my list of programs? How can I show him? It's a HP laptop with webcam.

  Hello

  1. What list programs are you referring?

  2A the webcam displayed in lists of programs before?

  3. have you made a recent software or hardware changes to the system?

  4. What is the exact model of the HP laptop?

  If you are referring to any messenger or other list of programs, you may need to get in touch with the support of the manufacturer of the program to change the settings of the program to get the webcam appears.

  If the webcam is not detected by all programs, and then try the hardware store to check the question running.

  Alternatively, you can try to install the latest version of the drivers of webcam you referring to the HP support website.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• LifeCam does not open after instillation "LifeCam cannot find LifeCam files folder...". "Windows 7 64 bit

  "LifeCam cannot find LifeCam files folder or save a file in there.  For more information, see "Troubleshooting and product support" in aid of LifeCam. »

  It appears when I try to open the Microsoft LifeCam software.

  The camera to initialize not in video chats.

  I'm on Windows 7 64 bit.  It is up to date with all the latest updates.  I have the latest drivers, firmware and software for my webcam (LifeCam Cinema)

  I tried to uninstall, reinstall and update everything.  I disabled the firewall and antivirus during the instillation.

  No executable LifeCam won't open.  So I can't get LifeCam help or hurt shooting

  
  

  Hi ggiavasis,

  ·        What application you use to initialize the video chat?

  ·        How did you install the LifeCam?

  ·        What is the model number of the LifeCam?

  Try the steps listed in the link below: fix empty overview, "initialization error" or 'no camera not connected' error in the LifeCam software: http://support.microsoft.com/kb/933311

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is it really true that my iCloud calendar iPhone cannot find events more than a year?

  Is it really true that my iPhone iOS 9.3 5s iCloud calendar cannot find events more than a year?

  Yes, it's really true. Try week Cal. He does ' t with a smoother interface, but it has a very robust feature set. I use it in conjunction with the built-in calendar

• X 250 reports for SCCM 2007 boot disk WinPE "cannot find a valid network adapter."

  I built a 250 X with Win7sp1 Enterprise, used Lenovo System Update to update all drivers, driver and creates a new package of drivers of SCCM 2007.

  I added the driver v 12.12.80.1950 Intel I217-LM to the Boot Image, distributed to distruting SCCM points and created a new USB stick to boot using the SCCM Assistant.

  When I boot on the USB drive I get the message "cannot find a network adapter valid."

  I can use the ignition key on a 240 X without any problems.

  I can see the pilot I217-LM in the boot image. When I connect locally on the laptop, I can connect to a share on another PC, so the driver and connecting to the LAN function. It is only during boot on the key of USB startup problem occurs.

  Any help much appreciated.

  Problem solved.

  The boot image, I added the driver to was "not to inject a ConfigMgr driver", I created a new boot image added three drivers NET from the driver package provided by Lenovo SCCM for X 250 and the laptop can now connect to the SCCM server.

• Build error cannot find the distribution under construction

  I had a similar problem like this thread.

  http://forums.NI.com/T5/LabVIEW/build-error-can-t-find-distribution-being-built/TD-p/1462842/page/2

  My old guard Installer and ask for copy of the installation is finish. Quite annoying because it takes so long to get there. Any advice would be appreciated. I've attached a screenshot of my error message.

  You created this problem by running a build already install on your development computer. If you are distributing drivers with your installer you should NEVER run the installation program on the machine on which you build.

  Here's what happens:

  All software shops NOR where it was installed since in the Windows registry. When you initially installed it note where you install (DVD, network drive, etc.).

  When you build an installer in TestStand will prompt for this location if it cannot find the original installation files (that is, if you take the DVD from the drive disconnected from the PC from the network, etc.)

  What happened on this PC is you have to build a Setup program, and then you run this installer on the PC, and because the pilots were already present it replaced the path stored in the registry with the path where your Installer (e.g.) was C:\Temp\long path)

  I'm guessing that you have now deleted this former Installer. That means that you have to re - run installers for ALL the software to, OR that you have installed on this machine so the registry is updated to point to the path of DVD or the network path.

• Windows Vista Home Premium cannot find Xbox 360 as extender

  This may be long but im giving information as possible.

  I'm good with the computer. My Vista Home Premium computer cannot find my xbox 360 as an Extender. When I use the WIndows media player 11 and share, he sees my xbox very well. Zune software, same thing. My xbox 360 is here no problem on my network in "My Network Places".

  In Media Center, once I typed the 8 digit number it is said that he can not find the Extender. I did the following:

  Reset my router
  Reformat my computer
  Reset my xbox 360
  Double checked I got the right 8-digit number in media center
  Disabled windows firewall
  Went to the tab exceptions and compatible: WIndows Media Center, Media Center Extender, eshell.exe, discovery network
  went to the management of the computer and turned on UPnP device host (changed the startup type to automatic and restarted my computer)
  Permit "filter multicast" in my router settings
  UPnp enabled in my router settings
  Upgrade Vista (with SP1 as well)
  Re-installed the drivers for my wireless card
  Connected to the Xbox 360 WIRED to my router

  Heres the funny thing, I have a Sony laptop vaio with Windows Media Center Edition 2005 on the same network that sees my xbox all the time. Its actually connected through a microsoft extension program (XboxMCE05Lite - enu.exe) basically it works fine.

  One funny thing that may help with my vista (Home premium) Windows Remote Assistant machine fails or the other.

  Any ideas? If this can help, too, this computer is built on the ground.  Sense, this isn't a HP, Dell, Sony, etc.

  Network equipment:
  Router Linksys WRT54G
  Map of Netgear WG311v3 54 Mbps Wireless

  works fine with my other laptop. So I guess that the problem must be my wireless card. I guess that's a PCI card it would have nothing to do with the problem. I'm going tomorrow to buy a NIC. USB Im not in a race simply because my internet works very well without getting a new network card. I am just puzzled and would like to get this to work because I hate running through computer problems and in abeyance. I'll get one tomorrow and let you know the guy.

• Utility HP cannot find installed CLJ 2605dn

  Mac OS x 10.9 Mavericks

  Color LaserJet 2605dn on ethernet

  • The printer is found and installed by ethernet and I can print to that beautiful.
  • Options and supplies in the system preferences window cannot display the power levels
  • The HP utility cannot find the printer at all (even if I manually enter the IP address or connect via USB).

  Printer device driver is 19.9, version of the HP utility is software updates and 5.19.2 picked up the update from HP and I installed the driver for printer HP 2.16.1 package manually.

  Any thoughts?

  Chris

  Hello Chris,

  I'm the developer responsible utility HP.  Sorry to say that this particular printer was never took care of with the HP utility.

  However, you can print a Setup page that will give you an IP address.  If you type this address into your browser, it will take you and built-in Web server, and it allows you to manage your printer.  I would like to know if you have any problems or have any other questions.

  Mac - Q

  If you have found useful please click the button of congratulations.

• The MCSTRM service failed to start due to the following error: the system cannot find the specified file

  My computer starts rather suddenly gel with many applications.  Today it froze again once I finished a long email and was about to send.  I lost him of course.  My Event Viewer was the topic.  Event 7000, Service Control manager Eventlog.

  What can I do?  I have Vista SP2 64-bit.

  I'll add that the kernel_driver of Type 1 mcstrm following 1 State arrested Win32_exit_code 2 <0X2>Wait_hint Checkpoint 0 x 0 0 x 0

  Please... any help to fix... my computer keeps freezing. and I will need to get a new laptop or an Ipad, if the problem persists.

  Thank you

  Candy C:\Users\David> net helpmsg 2

  The system cannot find the specified file.

  Is that error on this post code, IE something deleted, probably your antivirus or you.

  For problems to explore, which has nothing to do with this post, try this (which covers almost any problem).

  Explorer

  Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).

   

  To see if a fix is available

  In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution.

  You can also right-click and choose Details for more information. Post these details here. The name of the Module fault is important information.

  If the problem affects Panel press the Windows key + R and type wercon (or type it at a command prompt).

   

  Close the browser and start a command prompt

  • Close Windows Explorer
  • Start - All Programs - Accessories - right on command prompt and choose run as administrator.
  • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
  • Press Ctrl + Alt + Delete then Task Manager.
  • Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.

  Then to restart the Explorer after trying all of the following

  • Press Ctrl + Alt + Delete and choose Task Manager
  • In the Task Manager, click the file menu and then click new task (run) and enter explorer

   

  If you cannot start the Explorer at all

  • Press Ctrl + Alt + Delete and choose Task Manager
  • Under the processes tab, click Show processes from all users to elevate to administrator
  • In the Task Manager, click the file menu and then click new task (run) and type cmd
  • Other things you can try typing
    

    Explorer
    Explorer c:\
    Explorer/e, c:\
    wercon
    control
    Iexplore
    Rstrui

  If you cannot start a folder window you can use the Browse button in the new task dialog. Don't forget that you must right click and choose Open rather than double-clicking.

   

  Reregister the shell registry entries

  It is important that each order is accepted. If the command fails it means the file is damaged and must be repaired.

  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  regsvr32 /i shell32
  regsvr32 /i urlmon.dll
  regsvr32 RPCRT4.dll
  regsvr32 PROPSYS.dll
  regsvr32 MSCTF.dll
  regsvr32 cscui.dll
  regsvr32 rsaenh.dll
  regsvr32 timedate.cpl
  regsvr32 ATL DLL
  regsvr32 OLEACC.dll
  regsvr32 actxprxy.dll
  regsvr32 USERENV.dll
  regsvr32 msshsq.dll
  regsvr32 NaturalLanguage6.dll
  regsvr32 thumbcache.dll
  regsvr32 WINTRUST.dll
  regsvr32 MMDevAPI.DLL
  regsvr32 audioses.dll
  regsvr32 audioeng.dll
  regsvr32 ExplorerFrame.dll

  
  regsvr32 msi.dll
  regsvr32 FirewallAPI.dll
  regsvr32 netshell.dll
  regsvr32 pnidui.dll
  regsvr32 QUtil.dll
  regsvr32 c:\windows\system32\wpdshserviceobj.dll
  regsvr32 WINHTTP.dll
  regsvr32 C:\windows\system32\qagent.dll
  regsvr32 C:\windows\system32\portabledeviceapi.dll
  regsvr32 wbemprox.dll
  regsvr32 wbemsvc.dll
  regsvr32 fastprox.dll
  regsvr32 imapi2.dll
  regsvr32 wshext.dll
  regsvr32 gameux.dll
  regsvr32 msxml6.dll
  regsvr32 vbscript.dll
  regsvr32 jscript.dll
  regsvr32 wshext.dll
  regsvr32 wshom.ocx
  regsvr32 wshcon.dll
  regsvr32 scrrun.dll
   

  Delete the folder and the settings of the Menu

  This will remove the settings are saved for each file that you visit. Also the order of the start menu and pinned list settings.

  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  Reg delete "HKCU\Software\Classes\Local Settings\Software\Microsoft\Windows\Shell" /f

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Streams" /f

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StuckRects2" /f

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StartPage" /f

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\MenuOrder" /f

  Delete the thumbnail and icon Caches

  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  attrib - r s h '% userprofile%\AppData\Local\*.db '.

  attrib - r s h '% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db '.

  del "% userprofile%\AppData\Local\*.db".

  del "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db".

  Disable thumbnails and previews

  Damaged documents and particularly corrupt pictures or videos, can cause Explorer crash all trying to generate a thumbnail or an overview. This miniature and previews active option off.

  If you can start the Explorer, previews is Union on the command - folder and Search Options - framework of tasks use classic Windows foldersbar.

  Thumbnails are organized on the command bar - folder and Search Options - view tab - and check under Advanced settings - always show icons, never thumbnails and uncheck Show icon file in the pictures.

  If you cannot start the Explorer close Explorer as above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000001 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000000 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000000 f

  Turn around after testing the Explorer.

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000000 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000001 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000001 f

   

  A boot is a way to explore

  It can be caused by a shell extension.

  Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).

  The Explorer is built on addin programs called Extensions of Shell. The standard is provided by Microsoft, but programs add their own.

  • Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
  • Close Windows Explorer
  • Start Autoruns by right-clicking and choose run as administrator
  • Click on the menu Options - Filter Options and check hide Microsoft entries and disable include empty locations
  • Go to the Explorer tab and uncheck everything to the left.
  • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
  • Press Ctrl + Alt + Delete and choose Task Manager.  Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
  • Click the file menu and then click new task (run) and enter explorer

  If this can help, reactivate ½ at a time to identify those who. If this does not help, restart AutoRuns and go to the all tab and uncheck everything that it and restart. If this can help, reactivate ½ at a time to identify those who.

  Run Microsoft Fixit

  Microsoft has a range of automatic programs to solve common problems. To see problems explore

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  Recycle Bin
   
  If the problem is the trash bin remove the storage folders. It will be automatically re-created next time you delete a file or open the Recycle Bin. It will remove the trash and the files it contains for all users.
   
  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
   

  RD C:\$RECYCLE. BIN/s/q

   
  then repeat for each drive to change the drive letter, for example
   

  d:\$recycle Rd. BIN/s/q

   

  e:\$recycle Rd. BIN/s/q

   
   
  If the Office does not start
   
  This will create a new empty by user and common desktop computer. This will allow to test if a file on your desktop to start the Explorer.
   
  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
   

  MD "% userprofile%\DesktopTest".

   

  Add reg "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% USERPROFILE%\DesktopTest" /f

   

  MD "% public%\desktopTest".

   

  Tracking Add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" v "Common Desktop" REG_EXPAND_SZ /d "% Public%\DesktopTest" t f

   
  To restore default after having tested if begins to explore.
   

  Set ExpFix1 = % user

   

  Set ExpFix2 = % profile

   

  reg add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% ". ' ExpFix1 ExpFix2%% \Desktop "/f

   

  Set ExpFix1 = % Pub

   

  Set ExpFix2 = % lic

   
  reg add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v "Common Desktop" /t REG_EXPAND_SZ /d "% ". ' ExpFix1 ExpFix2%% \Desktop "/f
   
  You will need to disconnect then.
   
   

  New entry missing folder

   

  If the above does not help.

   

  Download NewFolder.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121.

   

  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the NewFolder.reg.
    

• After you install a new motherboard, my computer displays "Cannot find AsusSetup.ini:C:\Windows\Chipset\AsusSetup.ini" at startup

  I built a computer from scratch. I installed the operating system and then installed the drivers of MB. I have clicked around on the display from the CD. Whenever I start the computer, I get an error message that says: "cannot find AsusSetup.ini:C:\Windows\Chipset\AsusSetup.ini". How can I stop then remounted error?

  Thanks for any help.

  Roger

  Hi Roger,

  Welcome to Microsoft Community where you can find the answers related to Windows.

  According to the description it looks as you receive an error message when you connect to the computer.

  This problem occurs because of the scheduled task or as a result of a software conflict on your computer.

  I suggest you perform a clean boot and check if it helps.

  Clean boot will check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts.

  How to solve problems using the clean boot in Windows: http://support.microsoft.com/kb/929135

  Note: once the diagnosis has been made, make sure that you reset the computer as usual

  Keep us informed on the status of the issue.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Vista Home premium 32-bit. Acer5920. . MIC on all time, cannot find to turn off

  I am running Vista Home Premium 32 bit on Acer 5920. My built-in mic. has constantly and I cannot find how to change it. I only use the microphone. for Skype. To try to resolve the problem, I lost the icon for it and cannot see a plug icon in the microphone. Help, please.

  Hello

  Check the default built-in speakers and check if the problems persists:

  To do it please check the steps mentioned below:

  1. Click Start and click on Control Panel.
  2. click on sound
  3. in the new window, click on the tab 'Read'
  4. now check if the President is in the list and right-click on it and choose activate.
  5. highlight the speaker and click "set as default".

  I hope this helps.

• I just installed the recognition speech dragon, but when I try to open this said error msg "cannot find multi media device.

  I just installed recognition speech dragon, but when I try to open this msg of error says "cannot find media device - Hosea t check if your computer has a sound card or if the wave multimedia component is missing from the sound card.»  my monitor has built-in speakers and I can listen to music, news, etc.

  You have a microphone?  He is looking for an INPUT device, not a one OUTPUT.  Also, check device manager to make sure that you have not a driver problem.  To get the Device Manager, click Start and right click on computer, then click Properties.  Click Device Manager, and then look for entries with? or! beside them, which indicates a driver problem.  Finally check that your microphone is plugged in the right place on the computer, unless it is based.

  I hope this helps.  Good luck.