Back to home to Motoblur phone screen

Similar Questions

• Phone screen has gone

  Please help: last night I plugged my phone into the charger and left the phone.  This morning the screen turned upward, but empty.  When I press the telephone button I get a white blank screen followed by the main home menu.  I tried to reset soft & hard and I have hot syncd it.  I can receive calls but I can't because there is no longer a phone screen and when I push keys on my keyboard nothing happens.

  Any suggestions out there?  Thank you!

  Thank you!!!  I was not properly doing the hard reset.  You saved me buying a new phone for business.  The phone came back after the hard reset.

  Message is about: Treo 755 p (Verizon)

• My I phone screen see the black with a command like a dos {nand} system...

  My I phone screen see the black with a command like a dos {nand} system...

  Your phone has a serious problem. You can try to reboot (hold home and power at the same time for about 10-30 seconds buttons), but if that does not work, your hardware is probably fried. Make an appointment at your nearest Apple Store Genius Bar for confirmation.

• A way to keep active Wifi when the phone screen crashes?

  I noticed that, although my wifi signal is lower than we should, it is not randomly drop out. He does, however, is drop out whenever the phone screen will Dim and locks (IE, home struck and then slide to unlock).

  It's incredibly annoying! Is it possible to keep wifi on and connected to what I explicitly disable? It makes the option "synchronize then on the wifi only" totally useless. And I'm on wifi almost all the time. Whenever I open the phone, I expect to be in wifi to do something - not wait for a reconnection.

  Seriously, it is a show-stopper for me. If I can't find a way to keep the wifi between the locks of the screen, I have to exchange the phone for anything else.

  Surgo wrote:I've noticed that, while my wifi signal is weaker than it should be, it doesn't randomly drop out. What it does do, however, is drop out whenever the phone screen goes dark and locks (ie, hit home then slide to unlock).
  
  This is incredibly annoying! Is there any way to keep wifi on and connected until I explicitly disable it? It makes the "sync while on wifi only" option entirely useless. And I'm on wifi almost all the time. Whenever I open the phone, I expect to be on wifi to be able to do something -- not wait for a reconnect.
  
  This is very seriously a show-stopper for me. If I can't find a way to keep wifi on between screen locks, I'm going to have to exchange the phone for something else.
  

  As far as I know, you can tell the standby policy wi - fi to do 1 of 3 things:

  (1) when the screen is off

  (2) never when it is plugged

  (3) never

  You can get these settings by migrating the following steps:

  1. Parameters
  2. wireless & networks
  3. WiFi settings
  4. menu key (lower-left)
  5. Advanced
  6. policy watch Wi - fi

  If there is no other means, I would like to learn them as well.

• Why my phone screen randomly with lights to touch me.

  Why my phone screen randomly turns without touching myself.

  It might be background notifications (this happens with email on the iPhone of my mother). You can configure notifications by going to settings-> notifications. In addition, if you have an iPhone 6s, 6s, SE, iPhone 7, 7 more, they "raise to wake you up" that allows the user to raise to reactivate the user's iphone. I hope this helps!

• MY PHONE SCREEN IS BLACK, PHONE WILL RING AND ICAN HEAR THROUGH THE MESSAGES BUT CAN NOT SEE ANYTHING AT ALL

  MY PHONE SCREEN IS BLACK, PHONE WILL RING AND ICAN HEAR THROUGH THE MESSAGES BUT CAN NOT SEE ANYTHING AT ALL

  Try this restart your iPhone, iPad or iPod touch - Apple Support

  If this does not work, it may be a hardware problem.

  Hope this helps, good luck to you.

• Apple os 9.3.3 charged down behind my back and now my i phone will not open most of the apps because there is not enough memory.  I see that I have 40 GB of memory left on the cloud over 50.  Question, how can I use my pc to see what has been done

  Apple os 9.3.3 charged down behind my back and now my i phone will not open most of the apps because there is not enough memory.  I see that I have 40 GB of memory left on the cloud over 50.  How can question, I use my pc to see what has been downloaded on the cloud?

  Your question has nothing to do with iCloud. You should remove unnecessary data from your phone to free up about 10% of your phone's storage space.

• Jerky mouse mouseover function for all while the menu (file, options, help) and the key back/forward/home too. More scrolling is choppy every Web site.

  Jerky mouse mouseover function for all while the menu (file, options, help) and the key back/forward/home too. More scrolling is choppy every Web site since the update to version 3.6 to 4 RC1.

  Gel mouse pointer when it comes across objects that use some sort of animation or gradual highlighting when hovering on (which is basically all the Firefox 4 items menu, tabs, etc.) But also a lot of things on the Web pages as the green buttons on this page that change color when you hover over them).

  After rebooting my system, however, the problem seems to have disappeared!

  [, WinXP SP3 - 4 GB RAM, Core i5 M520, driver Nvidia NVS3100M 6.14.12.5738, Firefox 4.0]

• my phone screen is broken

  

  My phone screen is broken. I can not even use my phone now! How can I solve this problem? It is the only solution to buy a new phone?

  Glass price $100, you can call

• How can I move the toolbar back to the bottom of the screen

  original title: my bar of windows startup has always been at the bottom of the screen.  Suddenly he moved to the right of the screen.  How can I return it the n

  My bar of windows startup has always been at the bottom of the screen.  Suddenly he moved to the right of the screen.  How can I move this back to the bottom of the screen.

  Hello

  http://Windows.Microsoft.com/en-us/Windows-Vista/unlock-and-move-the-taskbar

  Unlock and move the taskbar

  Once you unlock the taskbar, it is ready to move to any horizontal or vertical office edge.

  Taskbar

  View all

  To unlock the taskbar

  • Right click on a space empty in the taskbar. If a checkmark beside him doesn't lock the taskbar, the taskbar is locked. You can unlock it by clicking on lock the taskbar, which removes the check mark.

    

    Note

    To lock the taskbar into place, right-click an empty space in the task bar, then click on lock the taskbar, so that the box is displayed.

  To move the taskbar

  • Click on an empty space on the taskbar, and then hold down the mouse button, dragging the taskbar to one of the four sides of the office. Once the taskbar where you want, release the mouse button.

• Phone screen Action

  So, I have the following code provided by RIM ready to use in my application:

  package com.rim.samples.device.phonescreendemo;
  
  import net.rim.blackberry.api.phone.AbstractPhoneListener;
  import net.rim.blackberry.api.phone.Phone;
  import net.rim.blackberry.api.phone.PhoneCall;
  import net.rim.blackberry.api.phone.phonegui.PhoneScreen;
  import net.rim.blackberry.api.phone.phonegui.PhoneScreenVerticalManager;
  import net.rim.blackberry.api.phone.phonegui.PhoneScreenHorizontalManager;
  import net.rim.device.api.ui.*;
  import net.rim.device.api.ui.component.*;
  import net.rim.device.api.ui.container.*;
  import net.rim.device.api.system.*;
  
  /**
   * This class listens for incoming calls.  When either of the callIncoming(),
   * callWaiting(), or callInitiated() callbacks have been invoked, this sample
   * application will send data to the incoming and active call screens.
   */
  public final class PhoneScreenAction extends AbstractPhoneListener
  {
      private Application _app;
  
      /**
       * Constructs a new PhoneScreenAction object
       * @param app A reference to the Application instance
       */
      public PhoneScreenAction(Application app)
      {
          _app = app;
      }
  
      /**
       * Creates various managers and fields contained within a PhoneScreen object
       * which then sends its data to the Phone application's foreground screen.
       *
       * @param callid Id of an incoming call
       */
      private void sendPhoneScreenData(int callid)
      {
          PhoneCall phoneCall = Phone.getCall(callid);
  
          if(phoneCall != null)
          {
              String phoneNumber = phoneCall.getPhoneNumber();
  
              if(phoneNumber.equals("5550111"))
              {
                  // Initialize PhoneScreen
                  PhoneScreen phoneScreen = new PhoneScreen(callid, _app);
                  phoneScreen.setScreenForeground(Color.POWDERBLUE);                                
  
                  // Create a PhoneScreenHorizontalManager
                  PhoneScreenHorizontalManager phoneScreenHorizontalManager1 = new PhoneScreenHorizontalManager();
  
                  // Create a Bitmap
                  Bitmap bitmap = Bitmap.getBitmapResource("logo.jpg");
  
                  // Get phone screen dimensions
                  XYRect incomingLandscape = PhoneScreen.getDimensions(PhoneScreen.LANDSCAPE, PhoneScreen.INCOMING);
                  XYRect activeLandscape = PhoneScreen.getDimensions(PhoneScreen.LANDSCAPE, PhoneScreen.ACTIVECALL);
                  XYRect incomingPortrait = PhoneScreen.getDimensions(PhoneScreen.PORTRAIT, PhoneScreen.INCOMING);
                  XYRect activePortrait = PhoneScreen.getDimensions(PhoneScreen.PORTRAIT, PhoneScreen.ACTIVECALL);              
  
                  // Get phone screen widths
                  int incomingLandscapeWidth = 0;
                  if(incomingLandscape != null)
                  {
                      incomingLandscapeWidth = incomingLandscape.width;
                  }
                  int activeLandscapeWidth = 0;
                  if(activeLandscape != null)
                  {
                     activeLandscapeWidth =  activeLandscape.width;
                  }
                  int incomingPortraitWidth = incomingPortrait.width;
                  int activePortraitWidth = activePortrait.width;             
  
                  // Calculate minimum width for active and incoming phone screens in portrait or landscape orientation
                  int minWidth =  Math.min(incomingPortraitWidth, activePortraitWidth);
                  if(activeLandscapeWidth > 0)
                  {
                     minWidth =  Math.min(activeLandscapeWidth, minWidth);
                  }
                  if(incomingLandscapeWidth > 0)
                  {
                     minWidth = Math.min(incomingLandscapeWidth, minWidth);
                  }
  
                  int bitmapWidth = bitmap.getWidth();
                  int bitmapHeight = bitmap.getHeight();
  
                  // Resize the bitmap if its width exceeds the minimum width
                  if(bitmapWidth > minWidth)
                  {
                      Bitmap bitmapScaled = new Bitmap(minWidth, bitmapHeight);
  
                      // Scale the original Bitmap into the new Bitmap using
                      // a Lanczos filter.
                      bitmap.scaleInto(bitmapScaled, Bitmap.FILTER_LANCZOS);
  
                      // Assign the bitmap and bitmapWidth references
                      bitmap = bitmapScaled;
                      bitmapWidth = bitmap.getWidth();
                  }                
  
                  // Calculate and set padding
                  int displayWidth = Display.getWidth();
                  int padding = (displayWidth - bitmapWidth) / 2;
                  phoneScreenHorizontalManager1.setPadding(0, padding, 0 , padding);
  
                  // Add the bitmap image to the PhoneScreenHorizontalManager
                  // and add to the phone screen.
                  phoneScreenHorizontalManager1.addImage(bitmap);
                  phoneScreen.add(phoneScreenHorizontalManager1);                             
  
                  // Create a PhoneScreenVerticalManager and add fields
                  PhoneScreenVerticalManager phoneScreenVerticalManager = new PhoneScreenVerticalManager();
                  phoneScreenVerticalManager.add(new LabelField("Adam McCombs/Junior"));
                  phoneScreenVerticalManager.add(new LabelField("Coach Notes: Loves Biking"));               
  
                  // Create a PhoneScreenHorizontalManager, set padding and
                  // add the PhoneScreenVerticalManager.
                  PhoneScreenHorizontalManager phoneScreenHorizontalManager2 = new PhoneScreenHorizontalManager();
                  phoneScreenHorizontalManager2.setPadding(0, 60, 0, 60);
                  phoneScreenHorizontalManager2.add(phoneScreenVerticalManager);             
  
                  // Add fields to PhoneScreen and display
                  phoneScreen.add(phoneScreenHorizontalManager2);
                  phoneScreen.sendDataToScreen();
              }
          }
      }
  
      /**
       * @see AbstractPhoneListener#callWaiting(int)
       */
      public void callWaiting(int callid)
      {
          sendPhoneScreenData(callid);
      }
  
       /**
       * @see AbstractPhoneListener#callInitiated(int)
       */
      public void callInitiated(int callid)
      {
          sendPhoneScreenData(callid);
      }    
  
      /**
       * @see AbstractPhoneListener#callIncoming(int)
       */
      public void callIncoming(int callid)
      {
          sendPhoneScreenData(callid);
      }
  }
  

  Basically it displays a screen action when some number of calls. My question is can I perform a loop to the variable 'phone number' and cross check with numbers I is stored in a database using an XML query and choose to display phone action if a Boolean value returns true? If so how would I implement that by using this code?

  one way... 1. first... u must implement phoneListener where appropriate call discount method check you the number with your database and mark a flag... 2. then show you phonescreen according to your flag screen... Another way... have you checked in phonescreen just before displaying the popup, it based on audit outcone... start 'resolved' + kudoes

• site returned more phone screen

  Hello

  I'm trying to make this sensitive site (annabaker.es) but does not not on a phone screen.

  I tried to put all the text boxes and images such as "stretch to the width of the browser" and then "width sensitive", but except the header of all the other boxes seem to be loose on the phone screen, you can scroll through and boxes of moving from right to left, showing a white background.

  I'll appreciate any help with this issue.

  Thank you

  You have solved the problem yet?

  In the opposite case: make sure you have all the objects that extends off the screen when you resize the page. I had a similar problem today and fixed by setting all my sensitive width text boxes. When you resize the browser text areas to get closer, but not always following the speed of the page. This means that some areas of text could extend more further than the edge of the screen on the width of your minimal page, even if you have reactive width on each page object. To fix this, just create a new breakpoint as wide as the width of your minimal page and make sure that no object extends farther than the edge of the screen width.

• tables and cell phone screen

  Does anyone know an html tag or css that can load another page, if the browser detects Web site is loaded on a phone screen?  or any other solution to put a couple of things in tables maybe so they load correctly on a mobile phone?  I have some pages I'm working very well and they load fine on my laptop and my MS Surface, but watching them in dreamweaver using the resolution feature, the tables don't look just to the right, so I would like to know if there is an alternative out there that might work and always show things in a table properly.

  Thank you.

  Use div tags 3 or more floating that breaks over a width of single column on smaller devices.

  CSS MEDIA QUERY

  =================

  @media only screen and (min-width: 769px) {}

  . Row {overflow: hidden}

  / * clear floats * /.

  . Row: after {}

  Clear: left;

  Display: block;

  content: '.';

  visibility: hidden

  }

  . Box {}

  Width: 33.33%;  / * 3 rows * /.

  float: left;

  }

  }

  HTML CODE:

  ================

  It's 1 box

  It is area 2

  It's box 3

  It's 1 box

  It is area 2

  It's box 3

  Nancy O.

• My phone screen is not full screen on the phone, as they appear in Design view.  How to solve this problem?

  My phone screen is not full screen on the phone, as they appear in Design view.  How to solve this problem?

  Hey Wilson,

  Please contact the technical support contact customer service if the problem persists.

  Kind regards

  Akshay

• For CS5 phone screen resizing

  I use CS5 to create a Web page, and I try to use media query to resize my text on web page for phone screens. I have a css phone, but apparently not kick when I open the page on a phone.  Also, when I watch multiscreen, it doesn't seem something like what is coming up on my phone.  The phone resizes my page and the text much smaller than what is shown in the multiscreen.  If it looks like the multivision example that would be much better.  Thanks for any help.

  I think I'm probably you leading down the wrong road. Add this line in yoursection and see if it's what you will.

  EDIT: Here is some info from the MQ of iphone...

  http://Stephen.IO/mediaqueries/#iPhone