Background blur when you change view States

Similar Questions

• pause a video (phone.flv) when you change views of component

  I'm trying to pause a video (phone.flv) during the change of views component via the main menu bar. There is a concrete example of what I'm speaking in the Flex store demo; If you start the phone demonstration video (ProductSupport.mxml) and then leave this component for the HomeView video component continues to play. However, if the video is on the main component of the application (flexstore.mxml), for example, where the ViewStack navigation and ToggleButtonBar exist then it is possible to pause the video using:
  
  Import mx.events.ItemClickEvent;
  
  private void clickHandler(event:ItemClickEvent):void {}
  VD.pause ();
  List.Visible = true;
  }
  
  I want to be able to do is to get the video to pause when I pass ProductsView (ProductSupport.mxml) component (where the video is embedded) to the component HomeView. Any ideas on how this can be done?
  
  Thank you

  I'm assuming that by break, you mean for the video to stop playing when you change tabs (video flexstore 'support' default behavior is to continue playing even when the view has changed, not very friendly). Or do you mean a break in the literal sense so that you can return to the same place in the video when you have selected a different tab?

  If this is the first case, specify a FocusEvent within the ProductSupport.mxml, so that when he loses focus when you select another tab, she calls it simply a Manager to stop the video. I have not looked at the code Flex store in detail, so your mileage may vary:

  http://www.Adobe.com/2006/mxml '.

  paddingLeft = "4" paddingRight = paddingBottom '8' = '4 '.

  horizontalScrollPolicy = "off" verticalScrollPolicy = "off" creationComplete = "addFocusListener (); » >

  import flash.events.FocusEvent;
  private void addFocusListener (): void
  {
  addEventListener (FocusEvent.FOCUS_OUT, stopVideo);
  }

  private void stopVideo(event:FocusEvent):void
  {
  If {(vd.playing)
  VD. Stop();
  List.Visible = true;
  }
  }

  ... rest of the code in ProductSupport.mxml

• Animate cc, the police is both by default when you change the size of the text field. Have integrated a font with the name prjFnt... but once I have change the rating in the design view of the prjFnt goes to the new roman times... what a mistake... don't

  Animate cc, the police is both by default when you change the size of the text field. Have integrated a font with the name prjFnt... but once I have change the rating in the design view of the prjFnt goes to the new roman times... what a mistake... don't have we not no matter what patch

  This problem has been fixed in the latest update to animate CC.

  You can upgrade to animate CC 15.1.0.1.13 creative use of cloud App or via the Help menu > updates.

• Why the rejection of multiple photos doesn't work anymore when you change pictures?

  Why the rejection of multiple photos doesn't work anymore when you change pictures? Does anyone else have this problem? It works on my other Mac but just stop working on my computer laptop pro, I have the latest OS and it worked until a few weeks ago. Thanks for any help!

  Selection of several photos at once enter "9" to reject all still works them for me in Aperture 3.6 on El Capitan.

  Have you tested, if the problem occurs only in an Aperture library or libraries opening?

  Create a new Aperture library to test and see rejection, so it works.

  If it does not work in a new library either, I got trash Aperture preferences.

  In preferences file is now in the container folder in the user's library.

  Try this:

  • Leave the opening runs.
  • Then open your user library and delete the folder complete ~/Library/Containers/com.apple.Aperture/
  • and the ~/Library/Preferences/com.apple.Aperture.plist file

  Your user library can still be hidden. To reveal the hidden user library:

  • Bring the Finder to the front by clicking on the desktop or the Finder icon in the Dock.
  • Select your folder user/home (with the House icon in the side bar of the Finder)
  • With this window in the Finder in the front window, press the ⌘J key combination to bring up the display options.
  • In the view options panel allow you to "show the library folder. That will make your visible user library folder in your folder.
  • Open your folder, then the library folder, then the containers.
  • Move the entire folder ~/Library/Containers/com.apple.Aperture on your desktop. Move the entire folder, not just the content.
  • Delete ~/Library/Preferences/com.apple.Aperture.plist as well.

  Now, restart the Mac, start Aperture and try see your book.  If all goes well, delete the folder on the desktop.

  Re: Viewer has been reduced mode Photobook

• Hi all OneHow can you buy an IBook UK not available in Indian store a store; When you change the status of your country, your billing information and credit cards won't work; is there a solution for this using the same method of billing.

  Hello world

  How can buy you an IBook of UK not available in Indian store a store; When you change the status of your country, your billing information and credit cards won't work; is there a solution for this using the same method of billing

  There is no solution, if it is not available in your area, you can't buy it.

• What exactly happens when you change the name of the computer, and it asks you to restart?

  What exactly happens when you change the name of the computer, and it asks you to restart - relating to the registration and identification of network?  Specifically when a computer isn't yet in one area but is still in a working group.  Y at - it show any PC by informing other computers it's name has changed?

  Computers into working groups are actively seeking each other, so if you rename a computer, it will not be shown anything. The restart is to erase the name of origin since the system cache, he will think that it's always the old name until the reboot takes place. Work computers is simply 'shake hands' with each other whenever they need to communicate.

  Computers that are part of a domain are created a 'computer' account that is assigned a random password that changes every 30 days by default automatically. These computer accounts work almost identical to an Active Directory user account, which means that they are not proactive they simply cached credentials with their permissions to provide if / when requested by heritage in the environment.
  Users and computers Active Directory accounts are stored in the NTDS. SAID the database, the backbone of an AD environment. When a computer name changes in one area, it takes the PC restarted simply for the PC. The change of name in Active Directory will replicate throughout the environment based on the settings of replication of this environment.
  I'm too simplify all this, but the general concept is there.

• When you change any personalsettings such as theme, display, screen saver or any of those things I get the warning: «Cannot find file C:\Windows\system32\rundll32.exe...» »

  Original title: rundll.exe error

  Hi all

  I have a problem with my file rundll.exe. When you change any personalsettings such as theme, display, screen saver or any of those things I get the warning: "cannot find C:\Windows\system32\rundll32.exe file. Check if you have entered the correct name, and then try again. "(Sorry for any incorrect translation. I have a Dutch version of Windows).

  Is there anyone who can help me with this problem? I searched on several forums, but no luck so far.
  If it helps, I have Windows Vista Home Premium 32 BIT

  Rgds,
  Robert

  Hi Robert,.

  You can try the following steps.

  1 put the CD ROM Windows XP disc in the CD-ROM drive.
  2. click on start and then click Run.
  3. type expand X: \i386\rundll32.ex_ c:\windows\system32\rundll32.exe in the Open box, where X is the letter of your CD drive.
  4 restart the computer.

  Good luck Robert.

• a string of numbers changing when you change a shape numbers

  I'm on a test run using Acrobat DC. When you change one or more of the numbers in a column loses its shape. I managed to change some PDFs using Acrobat DC, but some (from the source of the monthly information) won't let me change the numbers. What I am doing wrong?

  Hi tired:

  I looked at page 6 of your 15.06.23.pdf file. In fact, if you try to change 231-21, the formatting of the column gets disturbed. Then I tried to reduce the width of the box 'just enough' by entering the Central clamp on the right edge, then he restored the layout of numbers. Hope that works for you.

  Kind regards

  : RamB

• When you change the language in the new version of legacy? Thank you

  When you change the language in the new version of legacy? Thank you

  Change the preferred language in the creative cloud desktop application and let it reinstall the programs in the new language.

  Mylenium

• FM 10 crashes when you change an equation index

  Get the following error message when you change a clue in an equation:

  

  The dump of the error is:

  = Begin header =.

  Internal error: 10024, 7687848, 7688138, 10076935

  FrameMaker 10.0.2 for Intel

  Build: 10.0.2.419

  Window system: MSWindows

  Operating system: Windows NT 6.1 (major.minor.build: 6.1.7601 Service Pack 1)

  Generated on: March 6, 2012 11:34:15

  File: [REMOVED]\AppData\Roaming\Adobe\FrameMaker\10\FrameLog_12.03.06_11.34.15.txt

  = End of the header.

  [Deleted by the host details]

  Does anyone have an idea on how to fix this?

  Uninstalled SDL AuthorAssistant: this fixes the problem!

• Lighroom 5.4 develop view does not refresh when you change cursors

  Just updated to Lightroom 5.4 (using Adobe CC) on Win8. After "saw to develop" on any photo and change the exposure or any other cursor does not update the main view of the photo. He however update the thumbnail in the strip of film and the second monitor window correctly. I have tried everything I can think of:

  (1) demotion to 5.3 LR (which used to work)

  (2) force the regeneration overview standard and 1:1

  (3) uninstall the re - install Lightroom (5.3 and 5.4)

  (4) maximize the catalogue

  (5) remove the folder AppData Adobe

  (6) creating a new catalog with zero pictures, import a single photo and try to change exposure/contrast on this

  None of these results in the view to develop the image change when I change the cursors.

  Guys do you have experience with this?

  Hey entombed123,

  It seems that I found what the problem is - it's to follow the color profile. Attempt to set the default and check again. It worked for me and a few people who have had this problem before.

  Good luck.

• When you change an item type only display in hidden element its value changes from any value in value null. Why?

  
  Dear reading

  When to change a display one item type in the hidden element its value changes from null value any value . Why?

  I would like to use the result of the query in the hidden item, as well as to display it in report footer.

  shortly the displayed element can read footer bu area hidden point cannot be viewved in the footer box. Why?

  footer

  & P11_DISPLAY_ONLY_ITEM.

  footer

  & P11_HIDDEN_ITEM.  )

  (site of apex.oracle.com Application Express 4.2.5.00.08)

  concerning

  Enformatik wrote:

  in the part of the properties point setting its source type as query retune unique value;

  but when you set its value to the calculation (before header) it works correctly.

  It is the expected behavior. The values defined in the properties of the Source element / by default are only put in the controls of the page displayed in the browser, not in session state. To refer to a session-state item value (as in a & P11_HIDDEN_ITEM. substitution of static text) then the value must be set in session state in a calculation or process that runs before the substitution reference is returned.

  Setting the value using a calculation is the right way to do it.

• Overlay red when you change the brush size

  In the online tutorials, when people change their brush size and hardness, you can see a red overlay which shows what the real brush would look like.
  I don't see the Red overlay. Just the outline of the brush size.
  Is there a way to do this turn on?

  Photoshop CC + Win10

  You can then, as far as I know, neither use this feature, or other features based on the GPU as the rotate view tool, 3D etc. functions.

• When you change the date range, some data refresh some is not the case.

  In looking at some the report explore end-user (EU - FxM cartridge), I noticed that some data are updated based on the data and the time I selected. I noticed that the response time service level and measures processing time service level (metric in the green circle) doesn't refresh at all. I noticed the same behavior when you look at some different indicators in the report to explore end-user. Anyone encountered this?

  I think you are referring to this point of view, but I don't know how you got there from the browser of the end user:

  

  Looking at the Design tab in the right pane of Action and selecting the view "user end/FxM/Applications/Application Service level Layout" to inspect, it turns out that "jelly bean" service level indicators are configured to display:

  / responseTimeServiceLevel/value/latest/min

  / processingTimeServiceLevel/value/latest/min

  As the notes of Osama, the "last" value here will not change when the time interval of page is updated.

  Contrary to what he says, if this dashboard has been configured to display the "current" value, these indicators would show the last value not expired before the end of the time range of page.

  You can:

  -Open a session to demand that this configuration of the dashboard be changed in a future release, a matter of pension

  -change this system view (which will not survive an upgrade of the FxM cartridge)

  -(deep) to copy the view "User end/FxM/Applications/FxM information request" and change the copied view (which survive and upgrade). You must also change the type mapping "FxM Application result" in Applications/FxM/end user to point to your point of view, updated the.

  Kind regards

  Brian Wheeldon

• management of AutoComplete when you change jobs - an in-depth review

  Hi, I'm writing a guide to help people manage their AutoComplete when they change employers. I'm consider how to avoid the infrequent use of the emailing addresses administrative, tell invoices@old-employer, when you want to mail invoices@new-employer, years after leaving the former employer because of a semi-automatic bad-seizure rule (this happened to me recently).

  So far, I documeneted how to delete old addresses in the address book. This removes AutoComplete. However, I ran a few tests and found that if I have a old e-mail addresses once again, they come back in the AutoComplete with origional there position in the list again. Thus, two initial questions

  (1) anybody know what rules the use of AutoComplete. It is completely based on the frequency of emails without time factor. So, if I sent to invoices@old-company once month for two years, I have to post invoices@new-company 25 times before this address came out ahead?

  (2) someone can suggest a way to modify a particular rule, therefore, not just delete the addresses of the old company, but stop them come on in AutoComplete for good

  (3) if 2 is not possible, maybe a reset, but remove the content of the rules file is possible.

  As stated before all suggestions come from your address books. This is how it works. There is no "auto config complete."