Background image stretching across the page footer area
URL (.. / images/background_alt1.jpg) #5e3718 fixed horizontal left high
If you remove 'fixed', does that help? I use browser tools and I'm not at home to work directly with Muse. Maybe someone else can give an idea.
Tags: Adobe Muse
Similar Questions
-
Footer extend across the page on one page
Hello
I added a new card into my page of Contact here: http://www.localcounsellingcentre.co.uk/contact-lcc.html and now the footer does not extend across the page. As you can see on the home page and all the others, the background on the footer extends all the way through: http://www.localcounsellingcentre.co.uk/index.html
Please can someone advise?
Thank you
LianeWell, a simple control of the code source tells us she is inside the iFrame for the Google map and inherits its width.
Mylenium
-
Hello world!
How can I make a straight, thin line across the entire page, under my logo?
I need the line to switch from one across the page continuously.
I created a picture in Photoshop: I drew my logo and the line below. I gave to the line of the same width of the window by default DW (1099 px).
Then I import the image as a .png with transparency, because it must overlap each element in my web page.
It took me out of the container main and gave him a position of "relative", but then, live view and preview in browser are different: the line moves left or right, I can't control its position...
What is the best and easiest way to create this layout?
Thank you.
Oh - do this way:
Crop the logo to remove the line in the image. Then this do-
You will need to replace my "#aaaaaa" with whatever color is for this line.
-
Background image to fit the browser window
Hi all
I would like a background image to fit the browser window with a section of content it contains / above it. I can't do too much work, but I've done a mock up for you give an idea on http://www.greenpatch.co.uk/test/test.html! The basis for the content CSS is as follows:
#container {}
Width: 770px;
margin-right: auto;
left margin: auto;
border: thin solid #FF0000;
top of the margin: 207px;
}
#header {}
Width: 770px;
height: 120px;
background: url(images/newbackground.jpg) no-repeat;
border-bottom: thick Ridge #006633;
}
{#contentwrapper}
Width: 768px;
float: left;
}
#left {}
float: left;
Width: 212px;
}
#right {}
float: right;
Width: 525px;
padding: 10px 20px 50px 0px;
}
#footer {}
Width: 770px;
padding-top: 8px;
Clear: both;
padding-bottom: 8px;
border-top: Ridge average #006633;
background: #669966;
}
Any suggestions much appreciated. Thank you in advance.Note Although the distortion. You can use this method if you must, but I
invites you to put some min and max limits on the size of your page. Otherwise,.
It will look all just horrible on the ultra wide screens or 3 components.--
Nancy O.
ALT-Web Design & Publishing
www.Alt-Web.com -
When I scroll in Firefox, a feint but remarkable line of distortion (directly in line with where my cursor is grabbing and dragging the scroll bar) appears horizontally across the page in multiple windows of Firefox. It is in any other application. Mac OS X 10.7, Lion on a Mac Mini Server, 2011. Suggestions or files I have to remove to do that, go away?
You are welcome
-
The website has encountered a problem and cannot display the page you are trying to view.
Original title: whe I go to windows updates, I get this message, the website has encountered a problem and cannot display the page you are trying to view.
The website has encountered a problem and cannot display the page you are trying to view.
Hello
It would help if you could answer these questions in order to solve the problem.
-What service pack is installed on the computer?
-You receive an error with the error code?
Windows update no longer works for systems with SP2 or less. To check your systems service pack level, click on Start, run and type Winver in the Run dialog box. If your system does not already have Windows XP SP3 installed, download and install XP SP3 from the link below.
http://www.Microsoft.com/en-US/Download/details.aspx?displaylang=en&ID=24
Note: You can ignore the it professional and network installation warning.
Follow the steps in http://support.microsoft.com/kb/883614 to ensure that the smart Service in the background and the automatic update service is started.
If the services are present and are running, then try to reset the Internet Explorer settings and check if it helps.
http://support.Microsoft.com/kb/956196
Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
Let us know if the steps help or if you have any questions.
-
When I try to update either using the can I Update or Microsoft Update I get the following message: "the site has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. "
When I open Microsoft Security Essentials and click Update I get the following message: "the Virus and spyware definitions failed and an error code: 0 x 80070424 message.»
I am unable to get the position of automatic updates to turn on. I followed a few threads that says run "services.msc" Background Intelligent Transfer Service is ongoing as is the workstation but automatic updates does not appear!
I tried auto Fix It and automatic installation of updates, but still no luck.
All the other programs on the seam of my computer for updated correctly. and seams of browser to work properly. I also tried dissabling my firewall and adding the site to my trusted sites update and that didn't work either.
I'm on PC based on Microsoft Windows XP Professional 5.1.2600 Service Pack 3 Build 2600 on a Toshiba X 86 vs
Q: which antivirus application was installed before installing MSE, was your subscription always news, and did you uninstall it before installing MSE?
A: I do not uninstall [McAfee Security Center before] I installed MSE...See...
Checklist for installation of Microsoft Security Essentials
http://answers.Microsoft.com/thread/bf757e6a-E320-4a67-92bc-767e6acb26c4Should I have any other antivirus software and Microsoft Security Essentials?
http://blogs.msdn.com/b/securitytipstalk/archive/2010/09/08/do-i-need-both-Microsoft-security-essentials-and-another-antivirus-software-program.aspx======================================
You could try the following:
[You may want to print these instructions for reference offline. [If a step said to restart, restart!]
1. download the McAfee Consumer Product Removal, save it to your desktop tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe
1B. download the Norton removal tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe
2. close all open applications (that is, anything with an icon on the taskbar).
3 uninstall McAfee Security Center & reboot.
4. make sure that the Windows Firewall is now enabled.
5. If S * PERAntiSpyware is always installed, uninstall it and reboot again. If not go to # 6's.
6. double-click on the file that you saved in # 1 a above, to run the utility. DO TAP not your keyboard until the race ends, then restart.
6. double-click the file that you saved in # 1 b above to run the utility. DO TAP not your keyboard until the race ends, then reboot again.
7. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.
8. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run the automated troubleshooter from end to end. [1]
9 restart a last time & test. Make absolutely certain that you can update MSE manually using the update on the update tab button.
~~~~~~~~~~~~~~~~~~~~~~~~
[1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove programs. -
I am at a loss. I've set up a root certification authority to sign all servers in my workspace of Horizon, SAML is in the Green and after a lot of reading when troubleshooting also synchronized on all my ESXi hosts and guests.
Basically, what I did is the following:
Set up the connection to the Server VMware View Horizon 5.2 - created different pools and can connect via the customer different platform. (a few times to eliminate any possible configuration errors along the way)
Configuration of VMware View Horizon Workspace 1.0 (a few times now) with self-signed and CA signed certs. My workspace appears fine, the synchronization of files, apps work, and view pools appear. When I try to launch your desktop from inside the Horizon workspace I get this error:
The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.
Now I think that I followed it down to something to do with SAML connection - which, to my understanding, archery chips between workspace and view. On the login server, I see it in the Windows event log:
BROKER_USER_AUTHFAILED_SAML_ACCESS_REQUIRED
SAML access required but not tempted by customer
Attributes:
Source = com. VMware.VDI.Broker.filters.SamlAuthFilter
Time = MON may 20 16:06:41 MDT 2013
Gravity = AUDIT_FAIL
Node = ViewConnection.access360.ca
Module = broker
Recognized = true
Something is not crossing to allow me to access my office view since the workspace of Horizon. If I remove the requirement of SAML on the login server see, when I try to connect to a desktop computer from the view connection server I get a promotion for and can I get my IDs & field and have full access with reviews, as well as blast HTML - just cannot get there with Horizon Workspace. There must be something that I am missing with SAML...
As I said, I'm at a loss here on what does not work between the Horizon workspace and the connection of SAML for display to connect to the server. There is no server security, server transfer, and firewalls is all off, so I don't think it's a network problem. Simple as possible. The Windows Journal event displays the login displays server error is: access required but not attempted by client SAML. I have all my servers synchronized after a few seconds - so I don't think that documented the TIME Horizon workspace synchronization time sensitivity is responsible here. I am Pack overnight, but will do exactly the same thing with a client of tomorrow - hopefully without the same result!
Any ideas?
A
So I re-deployed the VAPP (again!) very attentive as I went. As usual, the initial database installation failed because I entered my domain FULL of the gateway name, so it does not match. After useful messages already there for this (Workspace install fails with error creating the user admin) I used the wizardssl.hzn of connfigurator - going to recreate a rootca to the environment based on my FULL domain instead of the bridge - going and then let it grow all for the other vApps. I then connected to each and pulled down my private rootca and ran c_rehash, etc. (another useful message!- adding MS signed Certs to Horizon Workspace & laquo;) Carlos & #039; Corner) I actually use my background to UNIX and openssl to be my own private CA and sign all of my certificates. I created the SAN cert and added to the SSL configuration on the Configurator - going and connector - going. Oddly enough, both of these server do not appear to be accepting SAN cert that includes their ENTIRE domain, but that's for another day... My Horizon Workspace FQDN does show as being approved by installed RootCA private (which does not have other DNS names for the service - going, the Configurator - goes, the data - will and the connector - will, but as I have already said--a battle for another day) so it's a good thing. I joined my workspace to my domain name - well! Activated would be pools seen in the Configurator - goes - sync - good. CRT for the my display login server has accepted and implemented the SAML trust. Still good. Sync in my opinion users group who already had a couple of linked clone pools allowed to do. Good. Connected to the FQDN of my workspace and clicked on computers - seen my 3 pools. Clicked on one and after a few seconds, launched in a new window of the explosion. Success! I disconnected and connected on a different machine, and something that I saw before, but doesn't have a lot of attention to was the connector - will put 'use windows authentication', I couldn't understand why every time I sailed on my Horizon workspace a no vmware window opens asking access my FQDN:443 with a user and pass. It is this setting - duh. I'm not sure yet that gives me, so it's off for now.
Thanks for all the input: it's good to know that there are others with some of the same questions. It's still v1.0, it is related to some of these pitfalls. It is capricious with derived from same time less than 10 seconds seems to have a negative impact. Had to ensure my ESXi servers were strong (never worried a lot in the past with MS AD being quite tolerant with small derivatives) I tired my vApps affecting a NTP, but they seemed like being left to the default of synchronization to the ESXi host. See how than pans. CERT is somewhat capricious depending on your deployment. Of course the connector - will and the Configurator - must be signed by a CA that they are internal, but always be nice to then have signed internal...
Now, I'm on ThinApps for desktops as well as the web interface integration.
I bumped my head against the wall with my first configuration of Citrix XA and XD (before having VDI in a box!) and it was the best way to learn.
I don't know that I grave along that I finished my PoC, but I'm very happy with today's results. I still plan on the comparison of my logs successful with the logs I have pulled my former deployment TIME and see what it was that it was broken. I think it was that wanted me a PTR record to my domain FULL DNS MS. name I think I just had the direct search for the original bridge - will and FULL, but only a setback for the gateway domain - name. Would explain why I was never able to connect to the gateway to access your desktop. Oops.
A
-
The only time where I get this message "cannot display the page of the page you are looking for is currently unavailable ', is when I come back to my Yahoo home page after visiting other websites and click"home. " My SSL settings are correct; I tried to clear my cache, log out and go back online, repaired broken clusters, etc. I'm out of ideas.
The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
Note: This will make you lose all the Extensions, open Web sites and preferences.To reset Firefox, perform the following steps:
- Go to Firefox > help > troubleshooting information.
- Click on the button 'Reset Firefox'.
- Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
- Firefox opens with all the default settings applied.
Information can be found in the article Firefox Refresh - reset the settings and Add-ons .
This solve your problems? Please report to us!
-
When I connect Firefox, it starts to load the page problem loading page and this message pops up error content corrupted
The page you are trying to view cannot be shown because an error in the data transmission was detected.
Same problem here. I don't see a fix listed on this site. If anyone has found a?
-
When I try to access sourcea.fr to check my account, after I get my ID and password a window opens with the message "the page you are trying to view cannot shown because it uses an invalid form or not support compression. '" This only happens in the Fire Fox browser.
Hi BAMIRANGE,
· You try to use Internet Explorer and check to see if you encounter the same problem?
If the limited issue of Firefox then the number you posted would be better suited in the Forums of Mozilla Firefox. I would recommend posting your query using Mozilla's Firefox.
Support for Mozilla Firefox
http://support.Mozilla.org/en-us/KB
Hope this information helps.
-
The website has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem
Hello
Look in Control Panel - updates of Windows to see what is the KB and post it here. You can indeed
There no need and do a right click on it and HIDE it. Let us know what is the update, so that we can
help advise.Also, if you don't need it you can try to download it here.
Microsoft Download Center - research on KBxxxxxx the number of update for anchor xxxxxx
http://www.Microsoft.com/downloads/en/default.aspxDownload - SAVE - go to the place where your put it - click on - RUN as ADMINISTRATOR
If you need to fix the error:
Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
http://support.Microsoft.com/kb/956698Windows Update Error 80070002http://windowshelp.microsoft.com/Windows/en-us/help/c5f4d9e0-3eb6-426b-8118-0cedf489a75f1033.mspx#EJH
Or - these two (above and below must be the same)
Windows Update Error 80070002
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002Fix Error 80070002 when using Windows Update in Vista
http://www.mydigitallife.info/2007/12/21/fix-Error-80070002-when-using-Windows-Update-in-Vista/
Error Code 0 × 80070002 during Windows Vista SP1 Setup Install - SP2 might have similar problem
http://www.tipandtrick.NET/2008/error-code-0x80070002-during-Windows-Vista-SP1-Setup-install/You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
http://support.Microsoft.com/kb/910336Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
http://support.Microsoft.com/kb/956698----------------------------------------------------
Then run this:
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821------------------------------------------------------------
If necessary, you can get free reports of incidents:
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Original title: cannot run Windows Update
I just reinstall my Windows XP and SP3, but I can't run Windows Update and gives me the following error message:
The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.
For self-help options:
To support options:
- Microsoft online assisted support (no cost for Windows Update issues)
Can someone help me please? Thank you.
I just reinstall my Windows XP and SP3, but I can't run Windows Update and gives me the following error message:
The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.
For self-help options:
To support options:
- Microsoft online assisted support (no cost for Windows Update issues)
Can someone help me please? Thank you.
[1] select start > run > wuaucpl.cpl > disable automatic updates > apply (if the setting is changed) > OK
To disable the horse notification that appears in the status bar on automatic updates is turned off.
Go to start > Control Panel > Security Center > resources > change the way Security Center alerts me > uncheck automatic updates
[2] manually download the full install for IE8 exe and install IE8 and refuses to download updates at the time of the installation of IE8
http://www.Microsoft.com/en-us/download/Internet-Explorer-8-details.aspx
[3] manually download and install the latest cumulative security for IE8 update and restart the computer before
visit windows update via the shortened link in your Start menu.
When you have Win XP SP3 and IE8, it will be the necessary file recommend you download and save the file in the folder, and then double-click on and run the executable file from there.
Restart after installing IE8 cumulative security update. It should restart when installation is complete.
[4] now to connect to windows update manually through your browser using the shortcut in the start menu link. Ignore the warnings, recommendations to turn on automatic updates.
Report back please on the status and please report problems with error codes. Thank you.
Recommend you not install MSE but rather install a free antivirus like Avast or AVG.
Recommend also you do not install Windows Search 4.0 these programs not to live pleasantly on most XP machines and cause CPU excessive loading unpredictable and inconveniently sometimes interfering with the usual ability to XP if not to multitask without problems. Also recommend you only install Firefox is a browser much better than IE8 that will not work even at many Web sites.
-
Original title: problem accessing Windows update.
I just reinstalled a pre - SP3 of XP version. When I tried to download the SP3 I got the message: the site has encountered a problem and cannot display the page you are trying to view. I don't know what to do. Help, anyone?
Download the following:
http://www.Microsoft.com/en-US/Download/details.aspx?ID=28 (Service Pack 2)
http://www.Microsoft.com/en-US/Download/details.aspx?ID=24 (Service Pack 3)Ignore warnings about these packages for computer scientists, or only of the
too much network installs and others. These are full Service Packs which can
be installed without an internet connection or when no other SPs are
installed. Install SP2 first, followed by SP3.NOTE: If SP2 is already installed on your computer, or if the SP1a is installed, go straight to the Service Pack 3 package.
-
Original title - manual update of Windows XP via "Windows Update" fails
07/01/14: click on "Windows Update" on the desktop (XP Home) and XP Tablet
Result: 'the site has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. »
This office has begun on about 3 days ago and just this morning appeared on the Tablet
I do McAfee and Microsoft updates manually every morning after the startup of computers so that they will not automatically be updated when I'm busy with other things
I suspect that the McAfee via Verizon security package is the culprit since the 'look' of their package and procedures changed end of December
Since then, they have had updates almost every day
And around the same time, my problem appeared on XP Home Edition, I was not able to access Adobe PDF files and had to re-download Adobe Reader XI
Any body else having the same problem?
And help get the update of Windows XP to run again?
It would not be the first step to disable automatic updates in Control Panel and manually download and install the most recent cumulative security update for internet explorer since without first, everything in the way of troubleshooting will be futile?
Download and install the latest cumulative security for IE8 update and manually restart the computer.
visit windows update via the shortened link in your Start menu.
Assuming that you have Win XP SP3 and IE8, it will be the necessary file
Maybe you are looking for
-
emptys the phone in 16 hours battery
Hello Last days my Defy will be dead in about 16 hours, I uninstalled all apps I had on it, restarted, but the situation is the same. The use of drums in settings section shows that battery is primarily used by standby mobile phone slowed down, wifi
-
Play videos and other contents of my Lenovo tab A8 to my Samsung SMART TV
Hello I have a Lenovo tab A8. I also bought a Samsung SMART TV recently. I want to connect my tab to my TV so that I can share and look at the contents of the tab on the big screen wireless. I tried several different applications, but they did not he
-
MacBook Pro 15 "Earlier 2011: is - this compatible with 16 GB of ram?"
I am an owner of a memory of ram i7 processor of Earlier 2011 15 inch Macbook Pro with 4 GB (2x2gb).I want to upgrade to 16 GB, 2 x Kingston DDR3 1333 mhz KTA-MB1333 8 GB memory.The question is: are my motherboard, processor and SO ready to make full
-
Missing components in my file Ultiboard if I transfer my file Multisim
Hello! I am after this Introduction: http://www.NI.com/white-paper/10710/en/?CID=Direct_Marketing---em80795&espuid=CNATL000018702741 On the point 5. the part D: transfer to PCB Layout "" (8) select transfer "transfer to Ultiboard ' transfer to Ultibo
-
multicolored lines running through the screen of my computer Vista laptop window up and down
multicolored lines on the screen of my laptop window Vista from the top to down manufacturing blurr photos and texts. seem as if a screen is placed on the desktop.