Backlight() is now static. Ideas to keep the screen/backlight on

Similar Questions

• How to keep the screen Apple Watch?

  When you use Stocard, sometimes I need to rotate my wrist backwards to scan the barcode, but it makes the screen saver off!  I can't find anything that actually stay on.  Very frustrating, because most supermarkets have flat scanners, so the watch must be upside down for the barcode to be scanned.  It is not a problem with Apple pay.

  Any ideas?

  Hello

  On your iPhone, in the application of the watch, go to: Watch My > General > screen Wake - under the tap, select 70 seconds.

  When you wake up your screensaver by pressing on it (rather than by increasing your wrist), this will keep the screen awake up to 70 seconds - or until you lower your wrist after pressing it (if earlier).

• How can I keep the screen locked in portrait mode

  MY gen iPad 3 had a manual lock to keep the screen in portrait or landscape mode. How can I block this function on my cushion of air 2?

  It is on the control center.

  You will have an icon sixth on this line to compensate for the lack of switch.

  

• After installing Windows Vista, upgrades of office is now only 2 thirds of the screen, with one third black.

  Original title: April 16 to restart my computer after installing Windows Vista upgrades, my office is now only 2 thirds of the screen, with the third other black

  The whole office is there, but it is located in the Center, if the screen, with black bands at the top and bottom. By clicking full screen on the top right has no effect.

  Hi Jeremy,.

  Thanks a lot for your help. You're right, I should have said no upgrades and updates.
  There were a total of 10 updates:
  4 a security updates for Vista,
  1 security update for the Microsoft 2010 information access path,
  1 day of cumulative security for IE9.
  1 windows Live essential 2011
  1 definition update Windows Defender (KB915597)
  1 "" for Office 2010 "
  1 April 2013 malware tool
  I uninstalled Windows Live Essentials. I felt that I should not uninstall the updates of security, and the Defender update can not be uninstalled. It made no difference.
  I also checked the graphics card and told me that I had the latest version of the software.
  Then I checked the configuration of the monitor and graphics card configuration and found I could set the configuration to full frame. I did it and now all is well again.
  How and why the full frame disappeared April 16 remains a mystery.
  Thank you very much for your information without your help I would have been unable to delve deeply into the system. I learned a lot.

• I rebooted my machine yesterday and now when it comes to the screen with the scroll bar it restarts in loop. Impossible to enter Safe Mode (arrives at crcdisk.sys and while it recharges) or normal startup mode.

  I restarted my machine yesterday and now when it comes to the screen with scrolling bar (think Night Rider), it restarts in loop.  Impossible to enter Safe Mode (arrives at crcdisk.sys and while it recharges) or normal startup mode.  Startup Repair is unable to repair.  She argues that the onus of a BadPatch.

  Startup Repair shows the following:

  Problem event name: StartupRepairV2
  Signature of the problem 01: external Media
  Signature of the problem 02: 6.0.6000.16386.6.0.6001.18000
  03:6 problem signature
  Signature of the 04:262148 problem
  Signature of the problem 05: BadPatch
  Signature of the 06 problem: BadPatch
  Signature of the problem 07:0
  Signature of issue 08: 1
  Signature of the problem 09: SystemRestore
  Signature of the problem 10:0
  OS version: 6.0.6000.2.0.0.256.1
  Locale ID: 1033

  Hello

  I hope you made redundant data backups as I suspect that the drive has failed. If a PC, you must
  remove all power and remove and reinstall all the cables (at both ends where possible), memory and cards. Do
  not tighten, effectively remove and replace them with care.

  Click here for the manufacturer of your hard drive and launch their diagnosis on your drive.

  By manufacturer diagnostic utilities
  http://www.techsupportforum.com/hardware-support/hard-drive-support/302602-hard-drive-diagnostic-utilities.html
  SpeedFan
  http://www.almico.com/sfdownload.php

  HD Tune
  http://www.hdtune.com/

  ----------------------------------------------

  If necessary:

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  No new chances.
  Rob - bicycle - Mark Twain said it is good.

• How to configure Acrobat DC to keep the screen on while reading the PDF?

  My phone is set to exit the screen after 30 seconds and lock automatically.

  While I read any PDF on Acrobat DC - screen turns off after 30 seconds.

  How can I set up Acrobat DC to keep the screen on continuously during I read any PDF file?

  Hello

  Have you tried to activate 'Screen brightness Lock' for the application Acrobat DC?

  For Acrobat DC for Android, the option is available in the app.  The action menu, and select settings > brightness screen lock.

  

  For Acrobat DC for iOS, the option is available in the iOS settings screen.  Go to settings > Adobe Acrobat and choose lock screen brightness.

  

  The option prevents the screen from dimming/turning off when Acrobat DC is running in the foreground, which in turn prevents your locking device.

  I hope this helps.

• How to keep the screen on longer

  The computer stays on a bit of time and I keep after entering the password. Is there a way to keep longer?

  Hello

  Open windows control panel, open personalization, click on the link to screensaver at the bottom right and in the next window, set the time in the area of 'Wait' for once you want before the screen saver appears, and click on apply. Or if you never get the logon screen, Remove the check mark next to "on resume, display the login page»  Click on apply to save the changes.

  Then open windows control panel again and click on Power Options, click Change plan settings next to your current power plan selected in the next window, set the time using the drop-down list next to "Turn wide Display" to a more acceptable level and then click on save changes.

  Note:  Set in the Options menu of food to be slightly longer than the time set in the Menu of the screen saver or you will never see your screen saver start.

  Kind regards

  DP - K

• How to keep the screen on while the application is active [mobile Flex]?

  Hi there, does anyone know how to disable the feature that turns off the display if no button of the screen is detected?

  For example, I have a request, and if I do not touch the screen for some time, he died. How to disable that?

  Thank you!

  Figured out how.

  This is used inside the init() function:

  NativeApplication.nativeApplication.systemIdleMode = SystemIdleMode.KEEP_AWAKE;

  This disabled the application - app.xml:

• How can I keep the screen from closing when I close the macbook pro when you use the apple wireless keyboard?

  Try to use with my macbook pro apple wireless keyboard and an external display.  The display turns off when the macbook pro is closed.

  Make sure that it is connected to power.  It cannot run in clamshell mode of the battery power.

  https://support.Apple.com/HT201834

• How can I keep the screen keyboard to start when I sart my computer

  Whenever I start my computer the keyboard to the start screen. D how do I prevent this?

  Start button > Control Panel > left side view, classic > ease of access > click on computer/Mo mouse or keyboard > uncheck 'Use on screen keyboard' > click Save

• keep the tiff tags in the adobe portfolio

  Hello

  I downloaded a number of files tiff to a portfolio, however the data in format tiff tag fields disappears, nobody knows how to keep data available and descriptive in these files within the portfolio?

  Thank you!

  Hi Michele,

  Now, us don't keep the data which are transferred to the Portfolio/Behance, but we are working on a method to start doing this soon.

• KEEP the SECUREFILE DUPLICATES

  Hello

  I have a table that contains about 100 lines and nearly 50 of them are duplicates. I had specified DEDUPLICATE so that only one copy of the data is stored which is based on the hash value calculated.

  Suppose that now if I said KEEP the DUPLICATES, it will take in effect to existing data or it will affect only new incoming data. The lines will have duplicate data and will increase the heap size?

  Thank you.

  It will in effect for existing data or it will affect only new incoming data.

  If you are using SECUREFICHIERS LOB, then Yes, it will read all of the LOB segment and the segment size will increase if not you must use the oracle storage mechanism by default i.e. KEEP DUPLICATES

  Using Oracle SECUREFICHIERS LOBs

  ORACLE-BASE - SECUREFICHIERS output of database Oracle 11 g 1

• How can I keep the width of the columns (1) and (2) a header when you replace a table?

  I am trying to format a series of paintings using simple Excel files and two columns that look like this:

  

  I have already created a table style, but I find myself relating to two additional steps each time I replace the existing data with a new Excel file:

  Challenge #1: Manually set the width of each column to 3 inches.

  Challenge #2: Manually convert the top row a header.

  Each of these tasks only takes a few seconds to set up, but I'll have to make hundreds of them and the time adds up. Here's my existing workflow:

  1. Select the existing table, properly formatted.

  

  2 file > Place... (Replace the item selected and The show Import Options checked)

  

  3. import in an unformatted Table using the custom Table Style 1 created for this document.

  

  Note: Once fell, the width of the previous columns is lost and there is no identified header:

  

  4. I manually adjust the width of the columns to 3 inches.

  

  5. Finally, I converted the top row a header.

  

  Result is a perfectly formatted table, exactly 6 inches wide, each column taking up half the width.

  

  Ideas to keep the width of column after replacing the Excel file and/or fit automatically in the top row, as a header would be greatly appreciated!

  Something like this should do the trick. Copy the script in a text editor, save with the extension .jsx and put in your folder of InDesign scripting. If you do this a lot, it would be useful to assign a shortcut to the script key.

  To use, place your cursor in a table cell, or select a cell or a line and run the script.

  //BS"D
  // Copyright (c) 2015 by www.Id-Extras.com
  // Free to use, but please do not remove this notice.
  myTable = app.selection[0].parent;
  if (!myTable instanceof Table){
    myTable = myTable.parent;
  }
  if (!myTable instanceof Table){
    alert("Select a cell or place your cursor in a cell, and try again");
    exit();
  }
  myTable.columns.everyItem().width = "3 in";
  myTable.rows[0].rowType = RowTypes.HEADER_ROW;
  

• IPhone crashed the Middle updated and now stuck on the setting of the screen!

  My Iphone has been unusually slow. So I tried to update my phone I thought it's maybe the old version of the IOS that makes my phone lag (I think I downloaded the latest version, 10. something). While trying to update my phone, it crashed at halfway. Now I'm stuck on the screen that appears when your phone has been updated (white background, that invites you to enter the password and put in place). However, after putting in my access code and attempts to connect to the wifi, my phone indicates that the wifi password is incorrect, this is not. Also, when I try to connect through mobile data it shows that "your phone could not be activated because the activation server is not reachable. Try to connect your iphone to iTunes to activate it, or try via the mobile connection in a few minutes... ». As a result, I tried connecting to ITunes and I got a different view of error message saying "ITunes only could not connect to this iphone." An unknown error occurred (0xE8000015).

  Help, please!

  Try If you can to update or restore your iPad, iPhone or iPod touch - Apple Support.

  TT2

• Y550 loose hinge of the screen

  I had my Y550 for about 3 months now and everything was fine with the construction of the computer. However, I bought this computer as the hinge of the screen on my last computer broke slowly to the point where it was difficult to keep the screen in the same position as he flapped around so much. Now, only 3 months in, the hinge of the screen is loose quickly, and moves back about an inch, or several degrees. I thought it was a good computer. Now, I'm worried about the very thing that took 3 years to get to my old laptop is going to happen in 6 months on this one. Is it fixable with a miracle solution or can I send it in for warranty?

  without doubt it is fixable on the guarantee. Please contact the support of lenovo for more information and shipping problems.