backup of several computers with windows 7

Similar Questions

• How to change the extensions on several files with Windows 7?

  * Original title: Extentions

  How to change the extensions on several files with Windows 7?

  You hear no doubt, is that your movie software will only recognize certain types of image file formats.  If this is the case, you will need to reformat format files to any format PNG is recognizable by the software.

  Rather than we guess, please identify your «film» software

  Download and install IrfanView, which is a free utility for images.  http://www.IrfanView.com/

  IrfanView has the ability to read a great many formats of image files.  It can also convert image files formats.  And even better - for you - it can do all these things on a batch of files.

  As test, after I installed IrfanView, open one of your PNG files.  Now click on file > save as, and select the 'Save as Type' to be little matter the file type of your movie software will accept.  Save the file.  Make sure your movie software can accept the new file.

  Once you are convinced that you can modify files that you have in a format that you can use, use IrfanView

  File > Batch Conversion/Rename command.  If necessary, see IrfanView help on this topic.

• Several problems with Windows 8 - Upgrade-unable to download full

  Original title: several problems with Windows 8

  Last Sunday, after downloading Ab2word, my tiles shortcuts stop working. I have uninstalled the program, but nothing improved. I made an update of Dell and got the shortcuts work again (curiously I could always connect via the desktop). now, I get a message saying that Windows is disabled and to enable him, by putting in... but he says that it is impossible to activate. Then I tried the upgrade to 8.1 by the store and got a message saying that I was unable to complete the download. Now my shortcuts tiled work, but they open the sites registered by the office, not as a full screen. I tried to restore to the factory and now get the message that the system is unable to restore. I ran a dell diagnostic and it showed nothing. I did a full security scan and he came clean. I'm rapidly reaching crisis. When you try to seek help on the Web site, Windows 8 is not listed... It is 7 to 8. 1. any suggestions? This computer is less than 2 years old and I'm ready to take a hammer to it.

  Hello David,.

  Please write to us and offering the opportunity to help Microsoft Community.

  What exactly do you mean when you say "Windows is disabled and enable it via the setting..."?

  You receive the "Cannot download" error during upgrade to Windows 8.1, I'll follow the steps by David Williams Dixon in the Blog below.

  Something happened and the 8.1 Windows installation may not be completed. (And now you are bored)

  We know if the steps help you in upgrading the computer to Windows 8.1.

• Hello, I would like to know if I can install the software on several computers with my creative cloud. Thank you

  Hello, I would like to know if I can install the software on several computers with my creative cloud. Thank you

  Hello

  You can install and activate creative Cloud on two computers applications, regardless of the operating system of the individual associated with the composition of the creative cloud. See the page of the product license agreements for more information.

  Link: http://www.adobe.com/in/products/creativecloud/faq.html#what-cc

  Let us know if this helps!

• Photoshop on several computers with my one subscription price?

  I have a monthly subscription to Photoshop CS6.  I am able to download and use Photoshop on several computers with my one subscription price?

  Your subscription allows active installation on two machines.  Only one of these two facilities can be used at any time.

• I want to upgrade 2 computers with Windows XP to Windows 7 but I only want to buy a copy to use on both computers.

  want to upgrade 2 computers with xp pro and a netbook with W7 W7 starter without purchase of individual license for each that are all household use

  original title: the upgrade of several computers in the House

  The Windows 7 Home Premium Upgrade Family Pack allows you to install Windows 7 on three computers in the House, but it is currently not available.

  Windows 7 Home Premium Family Pack upgrade:
  http://www.microsoftstore.com/store/msstore/en_US/PD/ProductID.220510400

  As the Family Pack is not available - upgrade of three computers, you will need to buy three separate licenses. You can buy two Windows 7 upgrades for computers XP and an Express Upgrade for Windows 7 Starter computer.

  You can buy Windows 7 Upgrade here:

  http://www.microsoftstore.com/store/msstore/cat/CategoryID.44066700

  Express Upgrade purchase

  Type of upgrade Express in the box files and research programs in the start menu and click the Windows Anytime Upgrade.  From there, you can buy an Express to Windows 7 Home Premium/Professional/ultimate upgrade. Then you can enter your Express Upgrade product key and perform a simple upgrade from Windows 7 Home Premium/Professional/ultimate. Online Anytime Upgrade is not available in all countries. All programs and files will remain on the computer, there is no drive necessary and it takes about 10 minutes.

  http://Windows.Microsoft.com/en-us/Windows7/products/Windows-Anytime-Upgrade

• Computer with Vista unable to connect to the internet through two computers with Windows 7.

  Dear engineers,

  In our House, we have two new computers Windows 7 connect to Wired internet access.  Our friend came in hoping to play some MMO games with us on our connection (it has windows vista).  When we hung everything upward, by linking to our modem, his computer was visible on my husbands computer, but was visible on mine as a media device.  He could see the two computers, but could not get an internet connection and no viable ping.  We checked the network map and he showed my computer with one? related to my husband then connected to the internet.  Inside, there was an announcement indicating that the following devices are not displayed in the network map.  under of course was listed both our friends media device and the computer device.  I searched Control Panel and gave access to anyone on the login to my husbands system as long as me.  What happens if nothing else can I try to have its system you can connect to our internet?

  Thank you for your attention,

  Cerisea

  Hello

  If a computer is not properly visible it generally means that sharing is not set correctly to match your system.

  You must also set your computers with the computer account of the friend as a user on your computer.

  Everyone does not mean everyone wishing to connect.

  If the accounts are presented only for John, Jill and Jack, setting in the folder with all permissions saves the effort of definition permission separately for John, Jill and Jack.

  Everyone isn't everyone group, only John, Jill and Jack.

  In general.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• RDM on several computers with vMotion

  Hello

  I am trying to find a way to configure several computers invited on an ESX clusters to use the same number of logic by RDM unit without losing their ability to migrate between hosts in the cluster.

  • I created a binding file RDM on a storage VMFS shared using "vmkfstools - z", create a lun1.rdm file
  • For each virtual machine, I wanted to use the RDM, I added lun1.rdm as existing virtual disk, and the settings of the machine showed that the disc is added as "mapped raw lun.
  • Trying to power on 2 virtual machines that use the same LUN RDM due to a lock on the file.
  • Creation of drives on a SCSI controller authorized sharing power on multiple machines with the RDM LUN configuerd, but unable to migrate virtual machines between hosts...

  Anyone has an idea how can I configure my system VMs can therefore use the same ROW at the same time without losing their ability to vMotion?

  Thank you

  O.

  What you're trying to do, can be done.   Each of the RDM machines must be unique for each machine.  the first invited who starts and attached to the device it locks for other machines to use.

• Use thunderbird on several computers with data on server

  I want to use Thunderbird on my network home/office computers with data on a central computer. For the moment, I need to use mozbackup to transfer data from my desktop computer to laptop, which is a pain.

  Graeme

  As already mentioned, IMAP is the best method, but you can move the profile on the central computer folder and then have TB on each computer pointed to this location using the Profile Manager.

  http://KB.mozillazine.org/Moving_your_profile_folder_-_Thunderbird#Use_the_Profile_Manager_to_move_your_profile

  Another method is to copy a profile on a network share and start TB with command line arguments that specify the profile.

  3rd point: http://kb.mozillazine.org/Synchronizing_mail_on_two_computers

  There is a method of moving just the records of e-mail to another location:

  http://KB.mozillazine.org/Moving_your_mail_storage_location_%28Thunderbird%29

• Two computers with Windows Vista has problems with (screens going blank).

  We have a Sony Vaio laptop and an HP Touchsmart with Windows Vista.  Last week Sony screen turned black and jumped, then back with the message saying there was an error with the NVIDIA GRAPHICS DRIVER, the driver had stopped working properly.  You had to do repair system, which then gave me an option to do system restore to the previous time.  Done this and back Sony a bit, then the screen went black and had to repeat the process.  Long story short, it won't restore or do something.  HP Touchsmart now do the same thing.  Anyone having this problem?

  If you have the message on which you say that you did - it's a driver problem or a video card problem.  If you allowed Microsoft to update your nVidia driver - that might be the root of your problem.  It is possible that both machines have nVidia video cards, maybe even the same.  In any case - the solution remains the same for at least the one you quoted the error for.

  Download and install the latest video card for any device driver is installed and if this does not work - could be material.

  I'm guessing that the machines are in the same place - same meaning House or business?  If they are connected to a regulation of output/device which could damage the components via automatic voltage of the voltage drops and overvoltages?

• How to backup external hard drive with Windows 7?

  I use Win 7 Home Premium. Backup MS program only for the cd drive destination, even if the Win device manager sees the external hard disk that is connected by USB. How to get Windows 7 backup to recognize this external HD (I also have another machine Win 7 and this backup program also fails to see my external hard drive).

  Friday, May 15, 2015 15:21:22 + 0000, YolandaVillasenor wrote:

  How can I save my program if I'm going to buy another computer?

  In general, you can not do this. With a few exceptions, all the
  programs have a lot of components and references, scattered everywhere in your
  hard drive, including references in the registry. Just a backup copy of
  use your exe file.

  So if you want your old programs on your new computer, you will need
  to reinstall their original media.

• Satellite L500 - several problems with Windows 7

  Hello

  I bought a Satellite L500 with Vista as os. I upgraded to win 7 using the upgrade disc Toshiba that sent me. Since installing Windows 7, my laptop will freeze at any time.
  Ctrl-alt-del doesn't do anything.

  My only option is to turn it off with the power button. I installed all the drivers available on the Toshiba site, but nothing helped. In addition, since installing Win 7 the FN key does not work, the touchpad does not work and the eco utility will not work. I have checked all the drivers that I can find and reinstalled, or tried to update. I watched the mouse settings and the pointing device, and this explains his work.

  I think it is because I can not activate it with the FN - FN + F9 key. I cut the volume now with FN + ESC (couldn t a few days ago), I can use the FN key to sleep and lock the laptop, but the weak / brightness keys don't work. It seems that they only work up to F5.
  Any help would be greatly appreciated.

  See you soon

  Hi joey,

  You will find all the information in the event viewer Windows on this gel?

  You should check the Device Manager for unknown devices or yellow exclamation. Maybe it's a driver of s problem.

  In regards to the FN keys, you need to install Toshiba Value added Package, and Flash Cards Support utility. They are required for the FN keys and then you are able to enable/disable the touchpad (FN + F9).

  Last but not least check Toshiba page for a version of Windows 7 Eco Utility.

• Using Dynamic Link between several computers with files stored on a server

  Hello

  We have three editing suites, all with the latest versions of Adobe CC 2015.

  All three edit suites on a central server.

  Is it possible to make the following workflow:

  1. Open a project to create (direct from the server) in edit suite 1 and import a composition in After Effects (on the server) in the sequence using Dynamic Link. (Please note the project After Effects is not open as a result of mounting 1)
  2. Open the same project After Effects in edit suite 2 (directly from the server), and then make changes to the publication. (Please note the project is not open in edit suite 2)
  3. Have the changes reflected in first in edit suite 1.

  It is not working at the moment, I guess it's possible because files are stored and made available on a central server.

  Thank you!

  What you do should probably be made using Adobe anywhere.  Outside usage which I think that you will get the best results using the server backup and archiving only, keeping all files on the hard drives installed locally on each machine.

• Connect under several accounts with Windows view customer

  I need to be able to hold several sessions of view from a Windows machine. I have a user that connects so that new users to configure their profile. She must be able to keep his show logged in while she connects under the second account. I can open a second session of the view, but he always uses the same credentials. I need to be able to open the customer to see twice using different credentials. Is this possible?

  Not supported: you can run ' wswc - standalone "to get a new customer to launch and no not just to refocus the original instance.

• We have several computers with access to e-mail, why not synchronize emails?

  When a computer answer or deletes a message, it does not show that measures have been taken on another computer. How can I fix?

  Your account must be configured in IMAP on both computers.