Backup the files when you are installing 'clean' (Vista to 8.1)

Similar Questions

• Delay of the dialog 'Copy the file' when you drag a file to a folder that already contains.

  Delay of the dialog 'Copy the file' when you drag a file to a folder that already contains.  The dialog box only appears when that I disconnect.  In fact this problem can seriously mislead the user. The file has been copied to or not? This is a serious shortcoming of the operating system.
  A similarly delayed dialog box is to join files on a send to the recipient of the message.

  What is the cause of the delay? Dialog boxes are not under other windows - they break on screen as I log out.

  When I drag AGAIN the same file in the same folder, then I get a message that "the action cannot be completed because the file is open in another program.  (No doubt the program who was trying to copy in the first attempt and waits for a response to the dialog box may not show me!)

  Hardware: Computer laptop Asus M70.  VISTA Ultimate with the latest patches.

  Lorien, thanks for your response.
  A lot of time and effort was exercised in an attempt to find out WHY. I wanted to not just fix the symptoms. It concerned me greatly as a basic function of the operating system does not work. He was not fit for purpose. In the end I found that a third-party application compromised of WINDOWS VISTA 32-bit operating system. If an operating system can not reliably inform the user that an operation is successful or not, it is worthless. In the case above, I didn't move the files was a success (no response required) or the delayed response until I signed.

  In addition to the original problem, there was the following problem: http://social.answers.microsoft.com/Forums/en-US/vistanetworking/thread/24068518-31e0-4b23-823b-d54882792301 where "send to..." 'Recipient' disable the context menu in Explorer for JPG does not or not broken.

  Finally, I figured out the following error had something to do with my problems:

  Description:
  The server {AB8902B4-09CA-4BB6-B78D-A8F59079A8D5} is not registered with DCOM within the required time.
  

  -

  -

   

   10010

   0

   2

   0

   0

   0 x 80000000000000

   

   198817

   

   

   System

   ASUS_M70VM

   

   

  -

   {AB8902B4-09CA-4BB6-B78D-A8F59079A8D5}

   

   

  Arriving in my solution, I was inspired by the following articles http://blogs.technet.com/markrussinovich/archive/2006/08/31/453100.aspx     http://blogs.technet.com/markrussinovich/archive/2006/11/27/532465.aspx
  So I downloaded the MS debug tools and confirmed my suspicion of dllhost.dll using REGEDIT to set debugging on that.
  To cut a long story short, it's DivX 7.2 which caused me grief.  In particular, the file DivXDecH264.ax 'has an access violation - code C0000005 (first chance).  It has been autonomous in DivX Plus DirectShow Filters.     Thus, when it has been deleted (starting other Articles to original install DivX) through Control Panel of configuration/programs and features my system worked perfectly well.

  I know SFA on the architecture of Windows but why was this DivX file loading and cause an access violation whenever I used the windows Explorer?  How an operating system may fail in a basic function of by a third party issue?  There are some newspaper where this access violation was recorded?  It was only possible to identify it in debugging?

  What you fella?

• ADF: How to get the path of the file when you use component InputFile

  Hi all

  I use jdeveloper 11.1.1.5.0 version.

  in my case, I created program Mail Client mail where I used the ADF InputFile component for attach file mail.

  but problem is this return path only component InputFile from the file (only the filename get)

  and in my mailer class DataSource uses the full path name of file access.

  UploadedFile uploadfile=(UploadedFile) actionEvent.getNewValue();
       String fname= uploadfile.getFilename();//this line only get file name.
  

  so, how can I get the full path using adf InputFile component or any other way to respond to my request.

  Thank you

  Manish

  Try this (I did not, so I can't promise it will work):

  MimeBodyPart messageBodyPart = new MimeBodyPart(uploadFile.getInputStream());
  messageBodyPart .setFileName(uploadFile.getFilename());
  messageBodyPart.setContent(multipart);
  

  It does use the inputStream from the downloaded file as the content of the file attached. You shouldn't need a full path, since you're not going to use a file object to provide the content.  And it shouldn't be necessary to define the DataHandler.

  But if that doesn't work, I go back to my first answer.  Use uploadFile.getInputStream () to get the inputStream from the downloaded file, create an outputStream to write the file to the file system of the application server.  Then you have a file with a known path that you can subscribe to the DataHandler.  You can delete the file when you're done with him.

• How can I reduce the size of the file when you save a psd in pdf format

  I have a psd with graphics and text, it is 8.5 x 11, 300 dpi

  I flatten the image and go to save as .pdf file I uncheck all options in general.

  Compression, I tried a dozen different combinations and the way I found to get a document that is not pixelated or blurred is to use JPEG 2000 > lossless or jpeg > maximum.

  So I have a document of high quality but the file sizes are approximately 900 KB.

  I downloaded the documents of others of the exact same type and size (8.5 x 11, 300 dpi) that I have seen in Photoshop, they aren't pixelated or blurred and their file sizes are 300 KB or even less than 200 KB

  How do do that?

  Delete all layers used, invisible.

  Zip compression is sometimes better than the jpg compression (in the pdf output settings). Zip is lossless and it works best with a color not degraded or not images.

  Flatten the image before saving it to pdf format can reduce the size of the file, if you use the jpg compression.

  See a preview of your pdf file and we can comment further on how to reduce the size of the file.

• Lose the italics of the word when you are exporting FrameMaker 11 files

  When I import a Word file into image - the italics and boldface are maintained. But if I save the file as HTML or XML - that they disappear. If I retag them with character tags, they are maintained, but work in a science paper the italics are everywhere. Is it possible to find the italic origin and replace with label of character?

  I use FrameMaker 11.

  Are applied in the form of tags in Word character attributes or are they fair substitutions? Check the FM file to see if the items in italics and bold character applied tags. If this is not the case, use the search/replace to quickly label elements.

  1. first create the appropriate character tags.

  2. apply the tag to a single instance.

  3. use the copy > special to pick up the tag of characters to the Clipboard.

  4. use find it > Format characters to find the attribute setting in the shape you want to tag (SHIFT + F8 sets at AsIs ensure you selectt only Hat properties that you need to look for, i.e. italic or bold).

  5. use by gluing... option in the change for you apply character tag to all instances found.

• Firefox 17.0.7. Display the menu, when you are using extended view (Win7), flickers off when you move the slider to a selection. Reg FF version works fine.

  Using Windows 7, view extended., Firefox 17.0.7

  Firefox menus (file, editing, etc.) and user bookmark lists flicker in and out of visibility when you move the slider to a selection. This happens on the primary display only the second screen. It does not occur on regular product version (23, etc.) and does not occur on any other application.

  We are required to use version 17 on internal business machines.

  Bob Hello, that might be a problem with hardware acceleration - try updating your graphics driver, or in case this does not solve the problem, or there is no new version available at the time, disable hardware acceleration in firefox > options > advanced > General.

• -Pop-up menu (allows you to choose what program you use to open the file) when you insert sim or cd does not appear

  When a disk or sim card or data storage device is connected to the computer there should be a menu pop up that allows you to choose which program to use to open the file. This is no longer the case. Any ideas how to restore it?

  Hi John,.

  1 are you referring to AutoPlay settings in Windows XP?

  2. did you of recent changes on the system?

  If you are referring to AutoPlay settings in Windows XP, you can see the following article in Windows XP to enable the feature.

  The Autorun feature or the AutoPlay feature does not work when you insert a CD-ROM into the CD drive

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  You can also consult the following article:

  How to change or choose the program that starts when you double-click a file in Windows XP

• Why Lightroom will not save the file when you use the image Capture?

  When you work with video in Lightroom 5, whenever I press "Image Capture", I get an error message that says: "cannot save the file." I tried this on several video files, and I get the same message. Video files are. MOV files. I can't understand why this is happening!

  I had this same error message. I solved it when I moved the video file on the hard disk internal to the computer, and then it worked perfectly. He always gave the error message when I used an external video file from my hard drive. There for a long time until I tried this. No one answered this problem in forums that I could find.

  I hope this helps.

• What is the setting on a laptop to be able to close the cover when you are connected to a monitor?

  After a catastrophic situation on my laptop, I got the disc re formatted and reloaded a new operating system.

  I'm trying to rebuild.

  Previously, I had the configuration of the laptop so that when I closed the lid, it remained running so I can use my external monitor.

  Now when I close the lid, the laptop switches mode pause.

  I know there is a place to set up, but I'm not.

  Thank you

  Jack

  This requires that you are under W7.

  Go to "Control Panel" and find "Power Options."

  In the left column, find "closing the cover to choose."

  You will find what you need there.

• Control the duration/length of the file when you add it to the composition

  Hello

  This was bugs me for a while and feel that there is probably an easy fix for this.

  When I drag and drop a file (image, video, etc.) in the project to the composition/timeline panel, AE automatically decides that the length of the file is that of the whole of the compositions. Much of the time I want this file to be only say 10 seconds long while the whole composition may be 60 years for a long time. I know that you can drag and drop the file into the current-time indicator, it will still be long in the 1960s in this case however. So I have to 'manually' cropping the length of the layer.

  Is there a shortcut keyboard or something you can do with markers to decide the length of the file/layer before/while drop you in the composition?

  I use CS6.

  Thank you!

  You can set the time always in import options in the preferences.

  Mylenium

• Missing fonts claimed, not displayed as a font used in the document when you are looking for in "search for a font.

  Hello!

  So at the opening of the document, Illustrator brings me this 'HelveticaNeue-novel"is missing, so I opened the document.

  

  When you open the document, I go to the option "Find a police" under Type. HelveticaNeue-Roman is no where to find them and I don't know where he's hiding. Can anyone recommend other ways to hunt for the missing police said?

  

  Thank you!!

  I just wanted to check. What version of AI has been used to create the file? Did you get my message?

• Visible = "true" and partialtriggers of the problems when you are using "necessary".

  Hi, I think that I have not had my coffee today, but is it possible to have the following?
  
  Panelformlayout with a selectOneChoice and three inputText elements. "Visible" from each inputText attribute is based on the value selected in the selectOneChoice. The selectOneChoice a autosubmit = true and each inputText has the selectOneChoice as a partialTrigger. It all works fine, until I try to do the required selectItems = true. The hide-dynamic stops working, and the entries are marked as empty (but the selectOneChoice shows the new value).
  
  I tried to play with the addition of additional checks for the indicators 'immediate' and 'compulsory', for example, required = "#{pageFlowScope.testBean.requiredSet and pageFlowScope.testBean.showVal1}" but that seems to make no difference. " Someone at - it ideas?
  
  Example of project: (uncheck the box to display the form works well without defined the required indicator and check to enable the problems I see)
  
  http://www.mediafire.com/?immky4ynxqi
  
  In the event that the link above does not work, here is the source:
  
  JSP:

  <?xml version='1.0' encoding='UTF-8'?>
  <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
            xmlns:f="http://java.sun.com/jsf/core"
            xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
    <jsp:directive.page contentType="text/html;charset=UTF-8"/>
    <f:view>
      <af:document id="d1" title="test thing">
        <af:form id="f1">
          <af:panelStretchLayout id="psl1">
            <f:facet name="center">
              <af:panelFormLayout id="pfl1">
                <af:group id="grp1">
                <af:selectOneChoice label="Select" id="selOne"
                                    value="#{pageFlowScope.testBean.selectValue}"
                                    autoSubmit="true" immediate="true">
                  <af:selectItem label="Show: Value 1" value="reqVal1" id="si1"/>
                  <af:selectItem label="Show: Value 1 + 2" value="reqVal1_2" id="si3"/>
                  <af:selectItem label="Show: Value 1 + 2 + 3" value="reqVal1_2_3" id="si2"/>
                </af:selectOneChoice>
                <af:inputText label="Value 1" id="it1"
                          visible="#{pageFlowScope.testBean.showVal1}"
                              partialTriggers="selOne"
                              required="#{pageFlowScope.testBean.requiredSet and pageFlowScope.testBean.showVal1}"/>
                <af:inputText label="Value 2" id="it2"
                          visible="#{pageFlowScope.testBean.showVal2}"
                              partialTriggers="selOne"
                              required="#{pageFlowScope.testBean.requiredSet and pageFlowScope.testBean.showVal2}"/>
                <af:inputText label="Value 3" id="it3"
                          visible="#{pageFlowScope.testBean.showVal3}"
                              partialTriggers="selOne"
                              required="#{pageFlowScope.testBean.requiredSet and pageFlowScope.testBean.showVal3}"/>
                <af:inputText label="Value 4" id="it4"/>
                </af:group>
                  <af:selectBooleanCheckbox
                                          label="Make Vals1-3 required" id="sbc1"
                                            value="#{pageFlowScope.testBean.requiredSet}"
                                            autoSubmit="true"/>
  
              </af:panelFormLayout>
            </f:facet>
            <f:facet name="bottom"><af:spacer width="10" height="10" id="s1"/></f:facet>
            <f:facet name="end"><af:spacer width="10" height="10" id="s2"/></f:facet>
            <f:facet name="start"><af:spacer width="10" height="10" id="s3"/></f:facet>
            <f:facet name="top"><af:spacer width="10" height="10" id="s4"/></f:facet>
          </af:panelStretchLayout>
        </af:form>
      </af:document>
    </f:view>
  </jsp:root>

  TestBean, as managed pageFlowScopeBean:

  package com.testapp.view;
  
  public class TestBean {
  
      private String selectValue = "reqVal1";
      private boolean requiredSet = false;
  
      public TestBean() {
          super();
      }
  
      public void setSelectValue(String selectValue) {
          this.selectValue = selectValue;
      }
  
      public String getSelectValue() {
          return selectValue;
      }
  
      public boolean getShowVal1(){
          return "reqVal1".equals(selectValue)
              || "reqVal1_2".equals(selectValue)
              || "reqVal1_2_3".equals(selectValue);
      }
  
      public boolean getShowVal2(){
        return "reqVal1_2".equals(selectValue)
            || "reqVal1_2_3".equals(selectValue);
      }
  
      public boolean getShowVal3(){
          return "reqVal1_2_3".equals(selectValue);
      }
  
      public void setRequiredSet(boolean requiredSet) {
          this.requiredSet = requiredSet;
      }
  
      public boolean isRequiredSet() {
          return requiredSet;
      }
  
  }

  Thank you
  Barry

  Nick Haralabidis wrote:
  Hello

  The behavior is as expected: you make a value of 1, the value 2 and 3 value required and you autoSubmit on the selectOneChoice. Thus, when you make a selection, value 1, 2 and 3 of the value value are tempted to submit because of the partialTrigger. But since they are required, the validation is triggered.

  No, the validation is thrown in a different phase. The selectOneChoice is immediate and his calls renderResponse ValueChangeListener then the validation phase is never executed. It would be the case if the 3 values were also immediate, but it is not so.

  Nick Haralabidis wrote:

  If you don't want the postings through the Select and always have value 1, 2 and 3 of the required value value, follow these steps:

  (1) remove all partialTriggers of the jsf page

  (2) linking the panelFormLayout to support bean as in:

  
  Binding = "#{pageFlowScope.testBean.panelMain}" > "

  (3) add a valueChangeListener to the selectOneChoice as in:

  
  value = "#{pageFlowScope.testBean.selectValue} '"
  autoSubmit = 'true' immediate = "true".
  valueChangeListener = "#{pageFlowScope.testBean.onSelectionChanged}" > "

  (4) in your valueChangeListener add a partialTarget in the Panel as in:

  {} public void onSelectionChanged (ValueChangeEvent valueChangeEvent)
  AdfFacesContext.getCurrentInstance () .addPartialTarget (this.panelMain);
  }

  I tested it and it works :)

  Yes, it's another way to do it.

  Kind regards

  ~ Simon

• How to keep the spaces outside the files when you drag and drop them in a .bat file.

  I have a bat file, where I run a powershell script passing one argument which is a folder name. I added the file beats in my office, so I could just drag and drop a folder in the Explorer on the bat file.

  Works very well. With the exception of a killer detail. When I drag and drop a folder that has spaces, the process does not receive the full path. Space is causing the script to fail. Thus, for example, I can't drag & drop c:\program files\ in the bat file.

  Is there some setting in which case I can force drag & drop to use filename not spaced? Why don't the OS automatically in the argument with the quotes around it?

  In a command environment that it is practical common to surround with quotes of files names. If the names contain no spaces, then double quotes can be omitted. That is why your batch file should read

  PowerShell.exe myscript.ps1 "%."

• How to use the date of the file, when you download a file?

  Using the basics of 12 c, APEX 5.0 and IE11

  I am creating a file upload feature for my application.  I'm able to get the upload├⌐ file in my table, but one of my requirements is that I fill in a value in the table with the "file date".

  Is there an easy way to get the "file date" in the file being downloaded and fill a field for all records with this date?

  Tillie

  Tillie says:

  Using the basics of 12 c, APEX 5.0 and IE11

  I am creating a file upload feature for my application.  I'm able to get the upload├⌐ file in my table, but one of my requirements is that I fill in a value in the table with the "file date".

  Is there an easy way to get the "file date" in the file being downloaded and fill a field for all records with this date?

  That depends on your definition of 'easy '...

  The HTML5 File interface can be used to access date in browsers supportthe file was last modified.

  1. Add a hidden page that contains the file download point (P6_FILE_DATE in this example).

  2. create a dynamic action of change on the file upload question (P6_FILE):

  Event: Change

  Selection type: Agenda

  Region:

  Real Actions

  Action: Run the JavaScript Code

  Fire on Page load: NO.

  Code

  console.log('Get file modification date:')
  var fileItem = $x('P6_FILE');
  if (window.File) {
    if (fileItem.files.length > 0) {
      var file = fileItem.files[0];
      if (typeof file.lastModifiedDate !== 'undefined') {
        console.log('...lastModifiedDate for file \"' + file.name + '\": ' + file.lastModifiedDate);
        apex.item('P6_FILE_DATE').setValue(file.lastModifiedDate);
      }
      else {
        console.log('...browser does not support the HTML5 File lastModifiedDate property.');
      }
    }
  }
  else {
    console.log('...browser does not support the HTML5 File interface.');
  }
  

  If the browser has support for the File interface and lastModifiedDate property, the date, the file was last modified will be presented in the P6_FILE_DATE article in the form:

  Fri Jul 17 2015 10:43:44 GMT+0100 (GMT Daylight Time)

  You can analyze and convert your data load process to obtain a TIMESTAMP or DATE value according to the needs.

• Where is the lock? I can't see it anywhere on the screen when you are connected to the https site

  Until I downloaded the latest version of Firefox, it appeared with icons in the bottom right of the screen. With Internet Explorer8, it appears on the right side of the address bar.

  The lock has been replaced by the site identity button, for details on use, see https://support.mozilla.com/kb/Site+Identity+Button

  If you want to add a padlock icon in the address bar, you can use the add-on locks- https://addons.mozilla.org/firefox/addon/padlock-icon/