Bad audio when the DVD player works

Similar Questions

• my up to date iMac can't read installing lightroom 5 dvd I received for Christmas, the dvd player works fine with the other dvd, is it possible to download the program with the serial number of the dvd?

  my up to date iMac can't read installing lightroom 5 dvd I received for Christmas, the dvd player works fine with the other dvd, is it possible to download the program with the serial number of the dvd?

  No need to worry about the disk version. He would just install an update anyway once it has been installed. Download from the link provided below and use the serial number, you need to activate.

  Updates

• -DVD burn does not work in the DVD player sometimes

  I have a Mac Pro from the beginning of 2008, and it came with a DVD drive (OPTIARC DVD RW AD - 7170A).  I was able to burn DVDs with using toast in the past.

  But lately, the half of the DVD burn won't play in my DVD consumer player.  I get a "Disk error" message when I try to play them, and they do not load.  It's a strange problem, because some of them work and some do not.  I can't tell where the problem is.

  Is there a way to test the DVD player?  Should I just replace it?

  Many brands of blank DVDs gives very inconsistent results when burning. If you use a brand store or generic blanks, that may be the problem.

• The DVD player part will not work.

  The computer which does not the functioning of this disc DVD (standard CD works fine) ia a card mother ASUS A7V8X-X with chip AMD Athlon (TM) XP 3200 + and 1572864K memory running Windows XP - Pro SP3 works well using Microsoft Office, Paperport, as well as other programs using an HP with connected scsi Scanner HP printer.  All programs and materials work very well EXCEPT the part DVD of the functioning of the drive NEC DVD R/RW & CD-R/RW model ND - 3550A.  The standard CD reading and writing works fine on this computer.  And when this player is installed on my new Windows 7 computer, the DVD operation works very well.  Windows 7 computer also has a second CD/DVD of the same drive model NEC and THIS specific drive ALSO does not work the DVD part when placed on this Windows XP - Pro SP3 computer.  As part of my attempt to "solve" the problem, I've updated the BIOS of the computer this XP with no improvement noticed the CD/DVD drive.  All attempts to improve the results of the pilots in the statement that current driver is the most recent.  Of course, I need to get this resolved ao, any help will be much appreciated.

  JeeeBeee (this is the full spelling of G. B.  (HA!)

  Hello

  You have a third-party software installed on your computer to burn?

  If so, then uninstall the software and check if it makes a difference.

  If the problem persists, then download and run the tool of diagnosis from the link below:

  Your CD or DVD drive cannot read or write media:
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers Feedback Forum and tell us what you think.

• the DVD player on my laptop HP Entertainment PC has stopped working?

  My dvd player does not work.

  I have a laptop HP Entertainment PC, running Vista.

  My computer knowledge is limited, but so far I have: -.

  1. the updated drivers.
  2 uninstalled & reinstalled the drivers.
  3. asking someone to look at it to me who said that "it seemed ok in the BIOS then it must be the drive itself!
  4 bought & have a refurbished drive.
  5. who took me to the steps 1 & 2 above.

  I noticed that in Device Manager, a place called: -.

  Location 0 (Channel 0, Target 0, Lun 0)

  Don't know if this has an impact any fault but thought I would mention it!

  I also was told that by someone who had this problem on a HP, it could be a registry error.

  Thank you very much

  Russ

  Hi Russ,

  1. Since when are you facing this problem?

  2. don't you make changes to the computer before the show?

  3. you get any error message?

  4. What is the model number of the DVD player you bought?

  Please check that the DVD player is compatible with windows vista

  Please follow the steps mentioned in the links below.

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  http://support.Microsoft.com/kb/314060

  Hope this information is useful.

• (Redirected) The laptop N4110 watch DVDs when inserted DVD player "cd dvd and driver recovery."

  Hello

  I have the dell N4110 laptop... It is updated to the window 10 are a few days... last night while dong some work my screen turns off... then I tried to restart my stem, but several attempts failed... then I try to recovery via recovery dvd but my system does not detect not them... After several unsuccessful attempts, I tried to start the system via the external dvd drive did not work again to USB key bootable recovery dvd... without success... Finally, I tried to install 7 for Windows prof... It is installed as a charge... now when I put my cd dvd driver recovery in the dvd player... He blank SIAS dvd... do not know what the problem is. Although dvd player reads other CDs and DVDs... Someone please help me go back to my original home premium Windows 7...

  Thanks in advance

  Hi alokgzp,

  Please repost this in the software and the operating system, Windows 10 forum help.

• DVD burn with iDVD works on new DVD players, but not on older versions of the DVD player. Any suggestions?

  VDs that I burn with iDVD works on new DVD players, but not on older versions of the DVD player. Any suggestions?

  I'm using an iMac with OS X El Capitan 10:11.1 and iDVD 7.1.2.

  You use DVD + R disks?  Those who are not compatible with DVD players before 1997.  The DVD-R is compatible with all DVD players.

  

• I am trying to install a PC game. When the DVD and I click on install I get the message, setupexe has stopped working

  original title: setupexe has stopped working

  I am trying to install a PC game. When the DVD and I click on install I get the message, setupexe has stopped working, windows will find a response and advise. Nothing happens. What should I do to install the soul?

  Hello

  ·         The game you are trying to install?

  ·         You are able to install other programs?

  ·         The specification of the computer meets the requirements for the installation of this game?

  Step 1: Check if the game is compatible with Windows Vista.

  Windows Vista Compatibility Center: http://www.microsoft.com/windows/compatibility/windows-vista/default.aspx

  Step 2: Try to copy the contents of the DVD on the desktop. Then install the game.

• Does anyone have suggestions on what to do when the Windows 7 Installation DVD is not recognized by the DVD player.

  I'm trying to do a custom installation of Windows 7 Professional 32 - bit on my Dell Inspiron 530, which is running Windows Vista Home 32 bit.  I ran the Windows 7 Upgrade Advisor, which was positive.

  The DVD player does not recognize the installation of the new (purchased at microsoft) DVD, although he acknowledges other CD and DVD.
  I tried to restart the computer and also the start of the player directly in the BIOS.
  In the BIOS I have the following message:
  "No available boot device.
  Press the ENTER key to try again
  SATA-0: installed
  SATA-1: installed
  SATA-4: no
  SATA-5: no

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Fix for CD/DVD drive missing:

  http://support.Microsoft.com/kb/982116

  If this does not work, try to check the manufacturer of the optical drive to the firmware updates available.

• Equium A210 - after that set BIOS to update the DVD player has stopped working

  Hi, since I have recently updated my BIOS, my DVD drive has stopped working on my Equium A210-1AS with Vista 32 bit.

  I tried the program fixme Microsoft who does not work, upper and lower register isn't here ether in regedit.
  Someone at - it solutions for getting the DVD drive working again?

  Thank you

  Hello!

  The CD/DVD drive is listed in Device Manager? You see an error code?
  If the drive is listed in Device Manager, you should try to remove it, and then restart the laptop.

  Try to load the default settings in the BIOS.

  Have you tried to remove the upper and lower filters by yourself? Here is the solution from Microsoft:
  http://support.Microsoft.com/kb/314060

  Good bye

• Stuttering, beeps and the DVD Player lost on Satellite M40 149

  Hello

  For some time now the laptop will work ok for about 1 to 2 hours, and then all of a sudden the speakers start making random pitch high bleeps distorted very strong. When it starts, the system starts stuttering. Every 2 seconds or so it will freeze for about 1/4 of a second. All treatments freezes - including the sounds and display. It's annoying, but generally a slight Jolt sorts it...

  When this happens occasionally the DVD player will also disappear, and I need to reboot to get it back. Sometimes I need to leave it off for a short time so I think it's perhaps something to do with overheating?

  In any case, my main problem now is that the DVD drive is very rarely now. I used a few tools of analysis of the firmware and the connection to the drive port is present but the laptop cannot connect to it. I thought that maybe s DVD firmware update can fix this, but I couldn't yet.

  I couldn't find all the previous reports of the present. Anyone has any idea what this could be? Or how I can fix this?

  If she came, I'd be happy to buy an external DVD drive, but the presence of the bad connection interferes with some other tasks, I have...

  Thank you
  David.

  LOL :D I read on many Web sites that the iTunes software is in trouble and is not fully compatible with Microsoft.
  Apple and Microsoft together?  :| good idea ;)

  Thanks for the info ;) dude

• Satellite M40X-126: disk blocks when the DVD-RAM has been inserted

  Hello

  I have a laptop Toshiba Satellite M40X-126 with a super multi drive installed. I have a problem with writing to DVD-RAM. Sometimes, when I try to write data to a DVD-RAM disc, the DVD player makes a strange noise, as if the mechanic of material is blocked inside the car. The laptop will not write any data on him and he doesn't notch in this noise. And I can't open the drive, because it is blocked by the software. And windows is blocked as well, I can't do anything. The only thing I can do, is stopped the laptop by pressing the power on button a few seconds.

  I do not think, it is a software problem. I have installed all the necessary drivers (UDF) is installed correctly. And DVD - RAM writing runs smoothly most of the time. But I have every 5 times I insert a DVD-RAM disc makes it drive this strange noise and everything is blocked.

  My disc is damaged? Who has the same behavior?

  Thank you

  Reto

  Hi Reto

  I have the same drive, but it works without problem. I know that DVD-RAM media are expensive, but all I can suggest is you buy another provider and check if it will happen again.

• Satellite L455 - Burned DVD plays in slow motion in the dvd player

  Hello

  I have a Satellite L455.

  I got burned a DVD with Nero 7 premium, but when I play in the dvd player, it works idle all the time. Other movies are played normally (so the problem is not the dvd player phillips), this only happens with the ones I burned in my new Toshiba laptop.

  I have tried to burn all kinds of speed (x 8, 6 and 3), but the problem has not been resolved.

  Can someone tell what should I do?

  Thank you.

  Hello

  You tested this external DVD drive?
  I recommend to check the options of Nero again and maybe, you should also use an other DVDs from different manufacturers.

  My DVD player didn t play DVD's serious too, I changed the manufacturer of DVDs and then the DVD that can be read by a DVD player

• He cannot write the TIF Images to the DVD player.

  Original title: can not write on the DVD player.

  I'm trying to save several TIF Images on my DVD burner, but it does not work.

  When I go into my computer and look at the properties, it says there is 0 space used.

  space free 0-0 ability to the new blank DVD disc.

  It will play DVD movies.  Thanks for your help.

  Windows XP does not write on DVD, you can use another software.
  Your dvd player should also be a dvd burner, not just a cd burner.
  You should have software installed with the dvd burner, you have nero or roxio, this will do it for you.

• On Windows 7, by pressing the eject button on the DVD player sometimes causes the monitors to twinkle

  My PC works fine for just about everything, except when I need to pop in a CD or DVD. It seems random, but when I hit the eject button on the DVD player, my screens sometimes twinkle. It happens about once every 5 times as the button eject. I'm running a dual monitor, with a monitor on a DVI input and the other on a HDMI input. Both monitors sparkle.

  The only things I can think of that can cause the problem are of my diet or my graphics card. My PC has never stopped on me during other operations, including executing some more processor intensive tasks. This seems to be a problem with my graphics card, but why my graphics card would randomly hitting the eject button?

  Windows 7 Enterprise SP1 (64-bit)
  Intel Core i5-2400 s Sandy Bridge 2.5 GHz (3.3 GHz Turbo Boost) LGA 1155 65W Quad - Core Desktop Processor Intel HD Graphics 2000 BX80623I52400S
  G.SKILL Ripjaws Series 8 GB (2 x 4 GB) 240 - Pin DDR3 SDRAM DDR3 1600 (PC3 12800) desktop memory model F3-12800CL9D-8GBRL
  ASUS black drive Blu - ray SATA model BC-12B1ST/BLK/B/AS - OEM
  ASUS P8H67-M PRO/CSM (REV 3.0) LGA 1155 Intel H67 HDMI SATA 6 Gb/s USB 3.0 Micro ATX Intel Motherboard
  XIGMATEK NRP - PC series ACXTNRP-PC402 400W ATX12V Ver.2.3 80 PLUS BRONZE certified Active PFC power supply

  I found the solution to my problem of graphics. Wow, really?

  So after the video driver updated, he set a maximum resolution on my HDMI output to 1600 x 900. That's if access you the resolution settings through the control panel > display > adjust resolution. Is not that how most people set the resolution?

  The update of the driver has replaced the max resolution by default setting, but it can be given via Intel display control panel (no was not yet aware, I had such a control panel). This control panel option is available for the Intel graphics controller hardware. To set the resolution, right click on the desktop and select "graphics properties." Select 'Advanced Mode', and then configure the resolution 1920 x 1080. Once the parameter is committed through this control panel, the Windows 7 Control Panel settings to work as you would expect, and the monitor is the 1080 p display.

  It is delayed. Pardon my French.

  Well, at least now I'm back where I started, IE still has the problem with the eject button causing the dual display to flicker. It happened only twice since the update of the video driver, then perhaps that these events were flukes?