bad fps on export - many trials

Similar Questions

• I imported a bunch of photos of my Office I retouched and then when I tried to export it didn't export many and is saying that they lack :(

  I imported a bunch of photos of my Office I retouched and then when I tried to export it didn't export many and is saying that they lack

  Hi rochelleh35569723,

  I beg to reconnect please images in Lightroom: Adobe Lightroom - find folders and files moved or missing

  Kind regards

  Tanuj

• First export bad vs after export own effects

  I encountered this problem many years ago, but since he come running in each version of Premiere Pro, it's time to find a solution.

  Especially what bothers me is that all the videos I export from Premiere CS4 is not as clean as if I exported it in After Effects.

  I had two situations:

  1. I did an animation in After Effects, export the video to loosles to see what it looks like and the video looked very good and very clean.

  I imported the aftereffects composition through dynamic link in Premiere CS4 and put some music on. That I exported the video out of Premiere CS4 with the Media Encoder in some versions of the HQ as DV Pal, .mov, .h264, Targa sequences... and the video was not as clean as that exported directly from After Effects.

  What's wrong? Y at - it a Permira encoder bug? I had this problem also with an earlier version of first.

  2 I shot a movie in HDV format for a company. I edited the material in Premiere CS4 and since I have exported it to 4:3, I reduced the video. So there was more than enough pixels to make the image clean. But after have exported them out of Premiere CS4 the DV PAL, image quality was not clean.

  I imported that the first sequence in After Effects and export the video from there and I had a great and clean looking for PAL DV video.

  Once again. Is there a bug in first encode?

  I like the first, but since I can't get a nice picture out of it as I am planing to go to FinalCut Pro.

  Does anyone have a solution to this problem?

  Thank you very much

  Agetis

  Jim, I exported the animation in the 1. scenario as a progressive video.

  EI Yes but if you use PAL presets and exports in first, you have the default interleaving.

• Data merge problem - bad values when exporting PDF with "All folders" only

  Hi - I have the weirdest problem with InDesign: I use merge data from .csv to create a deck of cards (9 per page), and when I export to PDF from the data merge Panel, one of my field has erroneous data: it uses values from previous records and which repeat.

  What is strange, is that when the noticed, all right. Is also very good if I create a merged Document and PDF export. Is also very good if I export to PDF using just the range of entries it is play: I don't get that wrong data if export as PDF, "All records" in the data merge Panel.  Very frustrating!

  Someone saw? I feel that my data is ok, if the export of individual records is very well...

  Cheers for any help.

  Thank you! Which has me on the path to what looks like a fix...

  Copy all the fields in a new file does not solve the problem - the same behavior, but after the start of charges, I started to adjust the sizes of the fields and stumbled upon a possible solution.

  A field that trouble is a text box for a single digit, if limits are quite small. The name of the field for example placeholder. > is bigger and complained of cut-off text.  Increase the limits of the text box to be at least the size of the reliable placeholder text solves the problem. It decreases the size of a single digit... back of the problem.

  How weird.

  Thanks Peter.

• Bad import and export of quality. CS6

  When I import a video or a photo (it's HD) it seems pixelated and shit when in full screen and when I export. Help pleaseeee.

  The link is private, so I couldn't see him.

  However, looking at your capture sequence settings, Yes, this sequence is wide by 480 height 720. You can't develop as the monitor of a computer without the need to have the program "extrapolate" a large NUMBER of pixels, as you can probably see on a 1920 x 1080 or something similar. It will be very pixelated. Period.

  Was exported to say DVDs using DVD mpeg2 presets more a sound channel, try using Adobe Encore DVD authoring or another program creation, it will maybe look ok perform on a DVD player to a TV. That's what DVD are, after all.

  It will never look in case of export like the mp4 or something to play on a computer screen 1920 x 1080 or more.

  Neil

• images of 50 fps for export of 25 fps with a normal and slow speed

  Hello world!

  I use first since more than ten years, but now, for the first time that I have to deal with this situation. I have 1080 p at 50 fps 40Mbps images. My output images must be 25 fps 1080 p, but I need to have some video clips to a normal and some speed in slow motion. Any advise how to set my project and sequences? Should I do two sequences - one with 50 fps (for video clips that will be in slow motin) and the other with 25 frames per second and then nest 50 fps sequence in sequence of 25 frames per second for her (50 fps sequence) can be played back in slow motion? Or any other suggestions?

  Thank you!

  I duplicate the image in the project Panel, leave a version at 50 frames per second for use in sections of normal speed and interpret the other at 25 fps for use as slow Mo. use a sequence of 25 p.

• Voiceover first clip of bad quality, after export only. Audio effects involved. How can I fix it?

  All the sound quality is as desired in the timeline panel during the first edition. After export, the first clip in voice-over ONLY, now has a dominant white fuzzy noise. If I delete this clip and export, the clip that was the second, but now first, inherits the problem.

  The video below has the original "first music video" removed, to show that the problem persists in the new video for first, which was previously the second and previously sounded very good. Each "phrase" or an "expression" is on his own audio clip, on the same track.

  Also note that the sound quality of the music is great in each. In addition, the quality of the voice is perfectly fine in all the remaining 3 minutes of video.

  From what I can tell, it's like audio effects have not been applied to the item first, after export. I use DeNoiser, dynamics and Volume of the channel in the whole of the audio track of the set (as opposed to each individual clip) voice. When I apply effects to each of the first 3 clips and place them on a separate track, and export, all 3 clips have the problem of white noise.

  I guess that the effects take some time to 'register' and so when effects are applied to the entire track this should happen only once. But just who does not sense that this is a permanent problem or every video ever made by creating using DeNoiser and dynamics would have this problem!

  What Miss me? There must be a way to solve this problem.

  Here is a screenshot:

  

  I use version creative Cloud, Adobe first Pro CC 2015

  I exported with the following parameters:

  H.264

  Format AAC, AAC Codec (tried MPEG and Dolby as well)

  48000 Hz

  Stereo (tried MONO as well)

  High quality

  320 kbps bitrate

  Bitrate priority

  Make maximum use

  
  

  Thank you.
  

  WORKAROUND SOLUTION:

  I used both your advice to a solution that WORKS. Simply, I moved all the audio on this track 5 seconds back and insert an audio clip arbitrary at the beginning of the track. I then exported audio on one. WAV file. I imported the. WAV file in the project and trim the beginning (with the arbitrary clip) back to what is supposed to be the beginning of the audio.

  The arbitrary clip inherited the problem and the remaining clips are great. They reside on a track that has no effects applied, as the. WAV files retain the proper sound quality.

  Also, I've read just after this operation that checking the box "Freeze" can cause the denoiser to apply instantly. I've never tried, but if it works, it's probably a simpler solution.

  Thank you.

• Lightroom 6.012 bug: bad content ' Discriprion' exported

  lightroom6 doesn´t export pictueres slideshow in jpg format well.

  Metafield 'Description' of the last photo is exported to all choose the show only instead of the contents of this field to each photo.

  It's finally "LR 6" unusable for anyone who likes to export slidshow pitures - like me.

  This bug made me lose the new version of the program, cost and working hours.

  When it will be fixed by adobe?

  Hello

  I was able to reproduce the problem.

  Here are the files exported with LR5

  

  And with LR6

  

  I'll file a bug report.

  Thank you very much!

• Import CinemaDNG (Blackmagic) AE @ bad FPS

  Hello

  When I import a clip (cinema DNG sequence) After Effects interprets the images at 30 frames per second instead of the 23.976 turned to.  I have to manually change the fps to each clip.  I'm doing something wrong or is this a bug?

  Also, I filed a bug for a related issue report, but when I import a Premiere Pro project or Premiere Pro AE XML imports a fixed single image instead of interpreting it as a clip. I tried to replace the images via the function 'replace the sequences' but the time code is not upward. (Related bug report, it's that ' replace with after effects model "does not work with CinemaDNG sequences through the cameras of Blackmagic)

  Thank you

  
  Randy

  > When I import a clip (cinema DNG sequence) After Effects interprets the images at 30 frames per second instead of the 23.976 turned to.  I have to manually change the fps to each clip.  I'm doing something wrong or is this a bug?

  It is normal to need to specify a framerate for a sequence of images.

  You can define a new default framerate for sequences of images of a certain type by changing the rules of interpretation:

  Using After Effects | Import and interpretation of films

• HP Solution Center does not work and I can't download it despite many trials

  my hp Solution Center does not work, I can not scan and I have tried several times to download a driver but it will not work.  I have a very frustrated by this and need someone to fix it please

  Hello todd999

  Try instead these instructions:

  Follow the steps below to rub the software and then reinstall it.
  1. open %Temp% and delete all the files in this folder. There may be some files that may still be in use, and you can ignore these files.
  2 download the full feature software and drivers
  Photosmart C7250 software (Windows 7)

  3. double-click on the downloaded file to extract the files
  4. once the software install window press Cancel or Exit to close the Setup program
  5. type % temp % in the field run or search programs and files.
  6 find the starting with 7z folder (example: 7zS2356)
  7. right click on 7z file and choose copy
  8. close the window by %temp% and then right click in the middle of your desktop and choose Paste
  9 open the 7z folder
  10 open the Util folder
  11 open the CCC folder
  12 run the Uninstall_L4 and then follow the instructions on the screen to remove the software.
  13. when the software has been removed, restart your computer
  14. run the Accessories\ System Tools Disk Cleanup
  15 open the 7z desktop folder and run the setup.exe file to reinstall the printer.
  I would like to know if you still have the same issues?

• Problem exporting - many tables

  Hi mates,
  I tried to generate an image with a few tables of a simple scheme:
  
  expdp------parfile = tande.par ' / as sysdba\.
  
  #tande.par
  SCHEMAS = USR_CONTROLFIN
  DUMPFILE = tstDump.dmp
  BACKUP_DIR = DIRECTORY
  LOGFILE = tstDump.log
  INCLUDE=TABLE:"IN ('CFI_ORGANIZACAO','CFI_PRODUTO' , 'CFI_CONVENIADO','CFI_TIPOCAPTURA','CFI_TIPOTRANSACAO','CFI_CLASSESTATUS','CFI_PLANOCONTAS','CFI_CENTROCUSTO','CFI_HISTORICOPADRAO','CFI_ROTEIROCONTABIL','CFI_EVENTO','CFI_MODALIDADE2957','CFI_CONFIGURACAOCONTA','CFI_CONFIGURACAOFISCAL','CFI_CONFIGURASALDOCREDOR','CFI_FAIXAATRASO','CFI_CALENDARIOCONTABIL','CFI_CONFIGURACOMISSAO','CFI_CONFIGURACANCELCOMISSAO','CFI_PORTADOR','CFI_LANCAMENTOMANUAL','CFI_PARAMPROCESSAMENTO','CFI_AGENDAPROCESSO')"
  
  It works, but the problem is: the other s/n told me that using expdp between different versions of Oracle DB works well. (from 11.2.0.3 to 10.2.0.5).
  
  Then I was checking a way to do by exp, I checked the docs.oracle.com and saw a fine example:
  
  _ exp scott/tiger TABLES = emp QUERY = bonus-"WHERE employment = \"SALESMAN\"" and sal\ < 1600\ "_"
  
  
  I would use it as sys dba, and I suppose to use the SCHEMA. TABLE of each table or there is a way to refer to a specific schema look like?
  
  Any help would be appreciated.
  
  Thanks in advance.

  expdp from 11g to 10g works if you use the version of parameter = 10.2 while expdp on 11 g.

  Ref: http://dba-oracle.com/t_export_import_different_releases_of_oracle.htm--inclut, for example.

• Method for controlling battery Microsoft acpi disables my battery on update.

  Hello

  
  I work with a Lenovo Y530 computer laptop (ab00216104). After a few years, the battery ceased to maintain a charge so I ordered a new third party like Lenovo temporarily stopped selling them. The new battery worked fine at first but, after a few minutes I get the message "battery plugged in, does not support" of the battery lower-left icon. It just stops charging the battery, but it will take place off the coast of the battery until it is unloaded. At first, I thought it was a bad battery however by many trial and error, I discovered the battery works fine. Let me explain.

  If I uninstall "control method battery compatible acpi Microsoft" in the Device Manager and reboot my computer with my card wireless off then the battery will work perfectly. It is not up to what I connect to the internet that it suddenly stops to load again. It is in the case once my computer is able to access to the internet and update of "control method battery compatible acpi Microsoft" that the problem occurs.

  As much, as I know there is no way to prevent it from updating once he establishes a connection and no way for "rolling back drivers" as long as this option is grayed out. I would be very happy any advice on this situation, thank you.

   

  Hello

  I suggest you to perform the following methods.

  Method 1:

  To enable or disable Windows Update driver manually on a single computer to research

  1. Click Start, right-click computer, and then click Properties.
  2. In the tasks list, click Advanced system settings.
  3. On the System Properties dialog box, click the hardware tab, and then click Windows Update driver settings.
  4. Select never check for drivers when I connect a device.
  5. Click OK twice, and then close the System dialog box.

  Method 2: install the latest drivers for chipset for laptop and the Coachman.

  If the problem persists, contact Lenovo support for assistance.

  Hope this helps!

• Script to automate exporting to idml for many doctors (perhaps using Hotfolder)

  Hi all

  I'm looking for a solution automate the export many docs INDD to IDML. Has anyone made such a solution?

  Thanks in advance!

  Hello

  You will be certainly interested in exporting batch Script of Peter Kahrel.

  Not at the "Hotfolder" but for what I know.

  Free script Batch convert/export InDesign documents. Peter Kahrel

  Best,

  Loïc

  http://www.ozalto.com

• Red and yellow stripes on my video after export to Adobe first CC

  Hello gentlemen of Adobe!

  I searched all over the internet, but I did not find my answer.

  I downloaded the latest update for Adobe premiere cc (2015) on my Macbook Pro retina 15 "(2013, 2.3 GHz Intel Core i7, 16 GB DDR3, GeForce GT 750 M 2048 MB) and I have no why but I still have the red and yellow stripes, appearing on my video after export H264, MOV, MPEG2, MP4. So, I have my softwareuninstalled and reinstalled, but nothing seems to work...

  
  

  Do you have any advice? Or do you know how to solve this problem?

  
  Thank you very much for all your answers, and I'm really sorry for my bad English!

  

  Many people have seen my post, but nobody has tried to answer...

  So never mind I found what I needed, you just when you export to do the rendering with the mercury playback engine only. I don't know why adobe make it so complicated.

• flickering video in the timeline and export of first

  I called tech support, and they said Friday (07.18.2014) that they'd call me back Monday and then never heard back talking about them.

  In any case, I need to downgrade Adobe first CC2014 back to the previous version first, and do it immediately. The upgrade of CC CC2014 led video flicker in the timeline and final rendering, I can't understand what it is to say that he didn't do it until I upgraded.

  If someone can tell me how to revert to a more stable, lower, I would appreciate it. I don't want to use a crack and I pay for the service - I need this matter to be addressed immediately, or return to a stable version while I wait for them to make CC 2014 more stable. If my only choice is to use a crack, someone put it simply, and when upgrading to become more stable, I'll come back.

  So I was never really provided with a patch to do this, make just a workaround solution that really does conform to the outside to get a clean. They had me change my settings in sequence to 25 FPS (?), which I never thought to try it on my own because I don't shoot, edit or output in this environment. That said, if I change in a sequence of 25 FPS, but export at the 23.976 I draw, I get a clean record. This own rendering, however, happened only once, and I don't know if it's going to be consistent. The reason it works has never been quite clear to me.

  That said, I'm sticking with first CC for now, until Adobe can fix the software to work the way it's supposed to. I honestly don't expect this to be fixed, so it is next year before update. I have also received bad advice from the person running the twitter account (they told me I could "save under" to get a file off CC 2014 that would work in CC), and I lost about three days of work, trying to render less flicker (1.5 days trying to fix it myself and the other almost 1.5 days in total ", trying to get results out of technical support which has said they'd call back Monday, but never made).

  No shot right here, these are the facts. Buyer warned on upgrading... Make sure you have an installer backup to an earlier version if you want to try the upgrade.

  Finally, the link posted by John Smith does not work for the first time, although the link I posted in response to him, don't.