Method for controlling battery Microsoft acpi disables my battery on update.


I work with a Lenovo Y530 computer laptop (ab00216104). After a few years, the battery ceased to maintain a charge so I ordered a new third party like Lenovo temporarily stopped selling them. The new battery worked fine at first but, after a few minutes I get the message "battery plugged in, does not support" of the battery lower-left icon. It just stops charging the battery, but it will take place off the coast of the battery until it is unloaded. At first, I thought it was a bad battery however by many trial and error, I discovered the battery works fine. Let me explain.

If I uninstall "control method battery compatible acpi Microsoft" in the Device Manager and reboot my computer with my card wireless off then the battery will work perfectly. It is not up to what I connect to the internet that it suddenly stops to load again. It is in the case once my computer is able to access to the internet and update of "control method battery compatible acpi Microsoft" that the problem occurs.

As much, as I know there is no way to prevent it from updating once he establishes a connection and no way for "rolling back drivers" as long as this option is grayed out. I would be very happy any advice on this situation, thank you.



I suggest you to perform the following methods.

Method 1:

To enable or disable Windows Update driver manually on a single computer to research

  1. Click Start, right-click computer, and then click Properties.
  2. In the tasks list, click Advanced system settings.
  3. On the System Properties dialog box, click the hardware tab, and then click Windows Update driver settings.
  4. Select never check for drivers when I connect a device.
  5. Click OK twice, and then close the System dialog box.

Method 2: install the latest drivers for chipset for laptop and the Coachman.

If the problem persists, contact Lenovo support for assistance.

Hope this helps!

Tags: Windows

Similar Questions

  • String error 42 - VI method for controls server Unflatten

    Try to use the VI-server method to save and retrieve values from control. Get a generic error 42 when using the name "minimum value" but the Vi works fine if you use a name "minimum values" conrol Vi clos can pass (using S1) between two control names to show that the error is in the difference in name. Is there a way to solve the problem or if another method to save and retrieve orders be used.

    Attached VI is in LV2010 sp1.

    Thanks for your help.

    One thing you can try is to disable the option "Convert EOL" functions to write to a file text and reading of text file.  As you save binary data as a string, you want to ensure that binary data is stored.  It may be better to use the binaries, instead of text files, because you are trying to save and load binary data.

    Chris M

  • Compatible Microsoft ACPI control method battery

    I uninstalled acciendentally Microsoft ACPI compatible control method battery now my battery icon is gone. No idea how to solve this problem?


    Try a system restore to a point where he worked.

    How to make a Vista system restore


    Then restart:

    New control panel - Device Manager - Batteries? If so see 2 below - otherwise, click in the box of WHITE/WHITE
    in the device manager - then click ACTION to restart the computer - Scan for hardware changes - top of the page and if necessary, see 2.

    How to enable or disable the Notification area system icons in Vista

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Microsoft ACPI compliant control method battery problem shows "plugged in, not charging." Help, please.

    Dear Sir

    I'm having a strange problem. My laptop (HP DM3) shows "plugged in, not charging". I searched on the net and according to some expert instruction, I took out the battery, plugged, booted my laptop computer and since the Device Manager I uninstalled Microsoft ACPI compliant method control pile driver, then off, UN-pluged, inserted my battery, and then restarted again. My battery has shown that charge but after awhile it automatically installed stack method compatible ACPI Microsoft and my problem was back. Please give me a solution for this problem. I'm having extreme difficulties for her. Your kind response to the question mentioned will be highly appreciated.


    Hi Mohapurush,

    Compatible Microsoft ACPI control method battery component supports the Advanced Configuration and Power Interface (ACPI) control method battery, include an interface to control method of code ACPI Machine Language (AML) between the battery and the host computer.

    You can use any type of communication interface supported by ACPI and any type of battery because the battery interface is fully accessible by the AML code control methods.

    Battery monitoring and management are available only on compatible computers ACPI and APM-enabled. Windows can handle the batteries that have a smart battery subsystem interface or interface of battery method of control on ACPI computers. Windows can also monitor several batteries.

    I recommend you contact the manufacturers of the system and check the settings on your computer.

    HP Support Forums:

    See the following article for more information.

    Battery method control compatible ACPI Microsoft

    Keep us informed on the status of the issue.

  • Compatible Microsoft ACPI control method battery is missing

    My computer (Acer Aspire V on Windows 8) suddenly began to turn whenever it was unplugged and does not turn on unless it is plugged. Battery icon saying "plugged in, but do not load.

    Everything I read said to try to uninstall and then reinstall the Microsoft ACPI control method battery driver in Device Manager, however mine is missing. The only option on the batteries in the Device Manager tab is the Microsoft AC adapter driver. When I click on "Search the hardware changes" or try to reset the computer it will not reinstall a new driver for the Microsoft ACPI compliant control method battery. How can I find/reinstall this driver?

    If the battery is about 1 year before, I think that's the problem.

  • Microsoft ACPI Control method battery compatible not reinstall.

    I had the plugged in, not charging problem on my laptop that runs Windows 7, and in order to solve the problem, I uninstalled Microsoft ACPI compatible with battery control method. I've done in the past and it worked wonders, but this time it is not automatically reinstall the control method, so I don't have a the battery icon on the status bar. Help, please. :(

    I tried out the battery then that he has been arrested, and that no longer works.

    Ah understand it. It was reinstalled, but under the name of "Unknown driver", so I simply uninstalled, rebooted, and it works like a charm!

  • You can help I was looking for a list of program which are controlled by Microsoft?

    Can help you I was looking for a list of program which are controlled by microsoft that run from the microsoft flag and R keys pressed together key. many of then are Ping-t and another is appwiz.cpl

    Windows key + R generates the Run dialog box that allows Windows to run almost any command you can find, the 'list' would be huge.

    In this box, you can type some commands, web addresses, UNC, paths management console scripts and so on. All programs on the computer may be open in the box run, provided that the full path is included or it is in one of the list of path variables.

  • HP compaq 6730 b: unknown device on pci-bus code 28 / unknown device on Microsoft ACPI-Complia... (ACPI\HPQ0006)

    Win.7 bit 64 pro HP 6730 b

    Unknown device on Microsoft ACPI-compliant system code 28

    Unknown device on pci-bus code 28


    You need the driver for this device...

    This package contains the software that allows the HP Quick Launch Buttons, which are special function keys on HP laptops. This software works with the notebook models that are running a supported operating system.


  • Windows XP SP III, status of the device: a driver (service) for this device has been disabled.

    Windows XP SP III, device status: _ a driver (service) for this device has been disabled.  Another driver can provide this functionality. _ (Code 32)

    Hello; I use a Windows XP SP III; After I entered a CD in my disc drive, I noticed that nothing was happening. So I try to manually click on the disk drive, noting that he had completely disappeared. After checking the status of the device in Device Manager, I found that this note has come:

    A driver (service) for this device has been disabled.  Another driver can provide this functionality. (Code 32). I had removed the device and reinstal it again but still the same.
    Information how to fix this problem would be apreciated

    Try following the steps for Windows XP in the following MS KB article:

    These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

    Create a System Restore Point beforehand and restart the computer later.

  • Invite command repeated to install KB2596856 (a security update for the 2007 Microsoft Office suite) and the installation fails.

    Original title: update of security for Microsoft Office 2007 suites KB2596856.

    Windows Vista. Update of security for Microsoft Office 2007 suites KB2596856. Update since August 15, 2012, repeatedly fails. Error reported are not. I tried Microsoft Fixit.  Reports, he agreed, but didn't. Tried to disable the firewall in Kaspersky. No effect. Can anyone help?

    I just received my post of October 8, taken over by you on 5 December and assume that your answer could not transmit. Thanks for the attempt and I would be grateful if you can get your answer for me. The current situation is that I stopped the repeated update and had no problems so I can live with the status quo. It may be that quite simply, the update did not apply to me or Microsoft have resolved anyway. Thanks again.

  • Standard Enhanced PCI to USB Host Controller: a driver (service) for this device has been disabled. Another driver can provide this functionality. (Code 32)

    How to solve: ' Enhanced Standard PCI to USB Host Controller: a driver (service) for this device has been disabled. "  Another driver can provide this functionality. (Code 32). »

    I hv tried to uninstall, shutdown, then reinstall and also put to day, but all to no avail.

    Just to ensure follow-up on the post of joel S can you check the following registry key, which relates to the USB:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ (36FC9E60-C465-11CF-8056-444553540000)

    Is there a 'name' UpperFilters and LowerFiltersin the registry for this key, in the right window?

    If so, what is 'Data' for these names?

  • A service of driver for this device has been disabled. Another driver can provide this functionality. Code 32 (hard drive problem)


    I've just moved a CD into my disc drive and noticed that nothing was happening. I went so manually click on the disc itself, and seen that it was completely gone. When you go through the process of troubleshooting in Windows 7, this note came:

    A driver (service) for this device has been disabled.  Another driver can provide this functionality. (Code 32).

    Obviously, I need to re - activate this service, but I am helpless about who or how. Any help would be appreciated!

    Try the following MS KB article:

    Try following the steps for Windows Vista, which should also work for Windows 7.

  • Backup methods for RDM

    I plan on P2Ving a Windows 2003 with 2 400 Go CX3-40 lun file server.

    If I join the LUNS as RDM on the virtual machine, which is the most effective method of backup?

    NPIV advantage in this scenario?

    Thank you

    If you have a RDM in virtual mode, you can use any backup method.

    And if you have SnapView license, you can also make a backup also offline if RDM is not in virtual mode.

    A good idea is have a physical machine connected to your San backup to make net-free backup.

    NPIV advantage in this scenario?

    NPIV is useful for control of the quality of service and sometimes for migration.

    But that doesn't help much for backup.


  • Specific method for MC dropTarget deactivation

    I want to drag an object using an animation hend (MovieClip) and drop it into holes. I can't use dropTarget method for this because when I trace ( output indicates "hend" only. Is there any method to disable the dropTarget for hend method


    You can momentarily happy remove from the display list (removeChild), check your droptarget then re your hend (addChild) to the display list.  or, you can use a hittestobject.

  • After I reset my Firefox browser"remember password for the site" options is disable.

    After I reset my Firefox browser"remember password for the site" options is disable.

    Hello karim138, firefox will not save your passwords when you put to execution in permanent private browsing mode ("never remember history" in options > Privacy panel).

    Privacy, historical settings of navigation and-no-track

Maybe you are looking for