BAD IMAGE CHECKSUM IERTUTIL. DLL

Similar Questions

• STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt and recovery XP says error during the extraction process. Details of error: path not found___

  My friend turned on their laptop packard Bell recently and had the following problem. Windows XP screen loads but is then followed by a blue screen that says STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt. The header checksum does not match the checksum calculated.

  I can't the laptop to go further. I have accessed the Microsoft recovery Panel and try a non-destructive recovery as there are some precious photos that need backup. However, when you select 'no profile' to begin the recovery, I get the message:

  Error during the extraction process. Details of error: path not found

  I'm a bit of a novice when it comes to this sort of thing, but if someone can provide step by step help giving rise to lose photos, I'd be willing to give it a try. I also have XP Home Edition disk that came with the laptop but has never been opened. Any help would be appreciated. Thank you

  You hear your message said something about rpcrt4.dll?  It is important to relay the exact message you see.

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  You use some CD to access this Panel of Microsoft recovery where this "no profile" option is?  I don't know what all this means if it isn't some CD shipped with your system, in which case, I would use it for a coaster instead of something to fix your system.

  If the c:\windows\system32\rpcrt4.dll file is missing or afflicted, you do not start in the last good known Configuration.

  You also will not start in any kind of Mode safe no more.

  Even if you could boot mode safe, you would find that sfc/scannow does not work in Mode without failure in all cases (never).  If you try it, you'll see a message like this:

  Windows file protection could not initiate a scan of protected system files.

  The specific error code is 0x000006ba [the RPC server is unavailable.].

  Failed to start the RPC mode server safe either.

  I can't recreate your error exactly, but it is easy to replace the rpcrt4.dll file.  Looks like you have a working CD drive, so put yourself a Hiren boot CD and when you started on this, you can copy your precious files to a USB device for safety.

  There should be a backup copy of rpcrt4.dll already on your system, here or here:

  c:\Windows\System32\dllcache

  c:\windows\ServicePackFiles\i386

  You need to rename or replace the rpcrt4.dll file which is in c:\windows\system32 and replace it with one you will find the backup copies.

  There should be a backup copy of rpcrt4.dll already on your system, here or here:

  c:\Windows\System32\dllcache

  c:\windows\ServicePackFiles\i386

  When you get the Hiren's CD's, you can use to replace the missing or suspicious file.  If you need help with that, first get the Hiren's boot CD made and start over, then we can continue.

  Do you have a Hiren BootCD you can download here:

  http://www.hirensbootcd.NET/

  On the left, click on download, scroll down, choose the latest version, the download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

  Direct HTTP mirror + Torrent, Torrent Magnet

  Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

  Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

  There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision)

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Bad Image error - igdumdim32.dll

  Igdumdim32.dll somehow got on my Windows 7 system. From what I can find, it is a dll for Windows 8. Get the error message: "C:\windows\system32\igdumdim32.dll is not designed to run on Windows or it contains an error...". "Very irritating and does not disrupt some features. What should I do?

  Let me describe the problem as completely as possible.

  Reads the 'error' message: "C:\Windows\system32\igdumdim32.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator... »

  The "error" message occurs repeatedly. It occurs when I try to open a video on Foxfire. It's entitled"FlashPlayerPlugin_15_0_0_223.exe - Bad Image. "When I click OK, the message reappears. It appears 3 times in total and after I clicked OK whenever the video runs correctly, but it won't go full screen. This does not happen with Internet Explorer. The same message occurs when opening certain programs such as: Quicken (titled qw.exe - bad Image), QuickTime Player (titled QuickTimePlayer.exe - bad Image), Garmin Express (titled Express.exe - bad image) and others. In all cases the message come up 3 times and once I clicked OK for everything the program runs normally.

  I tried to find igdumdim32 in windows\system32, but he's not here. There's an igdumdim64 it. However, I found in C:\Windows\System32\DriverStore\FileRepository\5.inf_a...etc. It is also in C:\Windows\SysWOW64.

  Just in case someone else looking at this, I finally corrected this problem.  If you're reading this, it probably means that you have the same problem.  There are dozens of this error of 'Bad Image' messages in this forum and in the Microsoft forum.

  I think that 'Image' is the idea here, but it took me a long time to understand that.

  By a very winding road, I finished on the Intel support site (a friend suggested this).  Here, you can download a utility to update the drive, I did.  When he was executed, he informed me that he thought that I have a graphics driver of custom provider and (thank you), I would be cautious about downloading a new driver on their part.  That is why I did not.  However, that me indicated that there could be a graphic driver problem.

  Then I remembered that during my many and varied travels through the internet read something on a "Recovery Manager" that HP installs in the product (once again, thank you very much).  HP customer care has to a set of instructions on how to use the tool on their website: (using Recovery Manager to restore the software and drivers (Windows 7).

  I ran the Manager and I replaced the drive of Intel graphics.  Problem solved.

  I hope this can be useful to others.

• service host process windows error and error of bad image with diasymreader.dll

  I recently got a computer(windows_xp).i plugged card reader and unfortunately, I opened movies (host process for windows services). This is the only mistake made by me.there after, as I begin my computer a dialog titled FORM 1. whereupon my computer will be filled by the series of errors.for example error includes 1. SVC crowd... exe-bad image 2. Image of broadcasteventwindow.2.0.0.037873 - bad .NET (which gives a msg that "the application or dll c:\windows\microsoft.net\framework\v2.0.50727\diasymreader.dll is a bad image.pls check against your installstion diskette") and then, and then... Please help me...

  Hello

  This happens due to corrupt files or viruses on the computer

  Perform a scan of the sfc to repair system files and perform a full system virus scan.

  http://support.Microsoft.com/kb/310747

• STOP: c0000221 {Bad Image Checksum} the image atl.dll is possibly corrupt. The header checksum does not match the checksum calculated.

  How can I fix this error? I tried to solve it in Recovery Mode. Forgive me, but I'm kinda a noob. The installation is XP Professional. The BONE has been preloaded, so I don't have the original to load disc, but I have a XP Home disc. I ran chkdsk and removed all the disk errors, but I don't know how to extract a new XP disc atl.dll. Thanks for any help you can provide.

  Ok.

  XP has also keep copies of 3498 critical files on the folder c:\windows\system32\dllcache (for future use).  If Windows File Protection detects one of them is missing, it will try to quickly and quietly replace the copy in the dllcache folder.  The atl.dll is one of these files monitored in the list (Yes - there is a list).

  You can copy the missing files to this folder by using the Recovery Console too.

  Depending on your installation, you can also get copies of missing files here:

  c:\c:\windows\ServicePackFiles\i386

  The file should never miss, so if yours had disappeared, I suspect your asked for but unspecified app antivirus/antimalware quarantined (effectively deleted) file.

  AVG, Avira, Avast?

  You should check the dllcache folder and if the file is not there, paste a copy there too so PAM has a backup if ever, replace it.

• message from Windows XP stopc000221 checksum bad image

  Windows xp stop c000221 bad image checksum this message occurred when my computer was installing updates can it be repaired without losing information on my hard drive?

  Hi andir12,
   
  1. What is the full error message you get?
   
  Check if you are able to boot in safe mode .
   
  If you are able to start in safe mode, please run System Restore in safe mode and install the updates manually to determine which updated a problem from happening. If the message of judgment occurs, repeat the process and refrain from settling the problem causing the update to.
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Mistakes of bad Image of Windows XP on startup

  Here is a list of the errors I receive at first upward:

  Rundll32.exe - Bad Image
  -application or DLL c:\WINDOWS\ilaqucad.dll is not a valid windows image. The text is the Setup disk.

  Rundll32.exe - bad Image
  -application or DLL C:\WINDOWS\abdsdmsg.dll is not a valid windows image. The text is the Setup disk.

  RUNDLL
  -module error loading specified ofqsi.dll not found

  RUNDLL
  -Error loading C:\WINDOWS\ilaqucad.dll
  %1 is not a valid WIn32app

  RUNDLL
  -Error loading c:\WINDOWS\abdsdmsg.dll
  %1 is not a valid Win32app

  Some of them are not pop up until I click OK on the previous errors.  I have no more of the Setup disk.

  What should I do?

  Part of the problem is if you configure the computer to start in a clean boot state, then things work OK (unlikely), there are no instructions that tell you what to do but then restore your computer to a normal state and which does not solve anything.

  Is that sort of thing pretty good work for you JoshB_2011 here?  Of course, this is not and he won't - ever.

  Is it supposed to be some kind of magic that happens when you start in a clean boot state, which makes all the problems disappear, then you go back to a normal state and all is well?

  To do something between these two things... and that's the "Troubleshooting" part... There is no included troubleshooting.

  I had read it all through (it may be not a good idea at first), then apply it.

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
  .  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• I get the 'BAD IMAGE' when many *.exe files is available. The error image refers to "BROWSE ~ .dll." What is the correct file name?

  When I type (OK) the computer continues to the application, I entered, but there may be a range
  in the opinion of the 'BAD IMAGE' with various. EXE files. Somehow gotten past as the correct file name cut short
  what he should ever TRAVEL ~ .dll. I can rename it leaving out the "~" symbol, but I don't know what to rename it.
  Help?

  Hello

  It would be useful to the Windows OS is supported .

• Helps the bad Image DLL C: Windows

  Help can some please tell Me what I have to challenge these error messages whenever I connect to my pc I get them

  1 Logi_MwX, Exe - bad Image

  The application or DLL C:\WINDOWS\system32\tuvtttTN.dll is not a valid WINDOWS image

  Check against your floppy installatioon.

  2 rundll32.exe - bad Image

  The application or DLL C:\WINDOWS\system32kuwmaayk.dll is not a valid WINDOWS image

  Check this against your installation diskette.

  3 RUMDLL

  Error loading C:\WINDOWS\system32\kuwmaayk.dll

  %1 is not a valid Win32 application

  Hello You did changes to the computer before the show? Method 1: A clean boot allows you to check if startup item or services to third-party application is causing this issue. Reference: How to configure Windows XP to start in a "clean boot" State: http://support.microsoft.com/kb/310353 Method 2: Sometimes rundll32.exe might be a form of the virus. I suggest you make a system full scan just to be sure. , Note 1: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss. Note 2: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. Here is a link that will give you information on how to perform a full scan of the system: http://www.Microsoft.com/security/scanner/en-us/default.aspx

• Rstrui.exe - bad Image of the application or DLL C:\Windows\System32\Wbem\Framedyn.dll is not a valid windows image. AND the exe task manager. -Bad guess. The application or DLL C:\Windows\System32\VDMDBG. DLL is not a valid windows image.

  I use WIndows XP.  After that THINKPOINT is presented on my system, I have not been able to access my task manager or restore my system to an earlier date.

  I have checked Kellys Korner and various other suggestions on the internet, but have had no luck with anything.

  It shows that the HKEY value for the Task Manager is set to 0.  Don't know if that helps.

  I BELIEVE I have the THINK POINT removed from my system.  I use Microsoft Security, Ad-Ware and Malwarebytes Anti - Malware.  Between the 3, it seems I have everything.

  But now I can not restore my system, or use my TASK MANAGER.

  Help would be GREATLY appreciated.

  Thank you!

  Bindifer

  Think like a malicious software...
  It infects your system and is not to be found and removed.
  What are you most likely to use to find and remove malware?
  Internet, Google, Task Manager, regedit, restore the system command prompt, etc...
  The malware is often afflicts one or more of these components to try to trick into thinking you need to perform a system restore, a repair facility, or even to reinstall your XP from scratch.  None of these things are necessary since you can usually just to thwart malware.
  If the referenced files are completely absent from your system, you will see messages like this when you try to run the applications:
  Taskmgr.exe - Unable to locate component
  This application has failed to start because VDMDBG.dll is not found.  Reinstalling the application may fix this problem.
  Rstrui.exe - Unable to locate component
  This application has failed to start because framedyn.dll was not found.  Reinstalling the application may fix this problem.
  Sometimes you can click through the OK messages to access the System Restore screen, but the restoration of the system is still broken.
  If the referenced files are present on the system, but somehow corrupted, you will see messages like this when you try to run the applications:
  Taskmgr.exe - bad Image
  The application or DLL C:\WINDOWS\system32\VDMDBG.dll is not a valid Windows image.  Please check this against your installation diskette.
  Rstrui.exe - bad Image
  The application or DLL C:\WINDOWS\system32\wbem\framedyn.dll is not a valid Windows image.  Please check this against your installation diskette.
  Sometimes you can click through the OK messages to access the System Restore screen, but the restoration of the system is still broken.
  These files are part of the file 3498 who cares about Windows File Protection, so unless the WFP is also broken it is likely that files are missing completely (you get a different error message).  What is more likely is that the files are somehow corrupt or have been replaced by incorrect files.
  Assuming that XP is installed on your C drive and in the windows folder, XP keeps copies of 3498 files that he cares about this issue:
  c:\Windows\System32\dllcache
  On a health care system, Windows File Protection keeps track of 3498 protected files and quickly and quietly replaces all the files in the list that appears missing from the backup folder.  File protection Windows will not replace the files if they are somehow corrupted or replaced by bad files.
  You can simply copy the backup files in the dllcache folder in the folder where are the suspects or missing files.
  Using Explorer, navigate to the folder c:\windows\system32\dllcache and individually to copy the backup files in there and then navigate the folders where the suspect or incorrect files are and paste in the copied files.
  Depending on your installation, you can also find copies of the files in this folder:
  c:\windows\ServicePackFiles\i386
  Answer Yes, if you are prompted to replace existing files.
  Test your functions now and then to reboot your system to make sure the changes 'stick', and then fix any problems.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• "services.exe - bad image" and "the application or the DLL...\ShimEng.dll is not a valid Windows image.

  At the start this morning, I received the message following "services.exe - bad image" and "the application or the DLL...\ShimEng.dll is not a valid Windows image. Is there a simple solution to this problem? If it is ok, the unit freezes then

  Hello

  1. you remember to make changes to your computer, after which the issue started?

  I would recommend that you follow these steps and check if the problem persists.

  Step 1:

  I would recommend that you run a full scan using theMicrosoft Safety Scanner and check if the problem is related to malicious software.

  Note: You may lose data while eliminating malware.

  Step 2:

  Test the issue in a clean bootand verify if the issue.

  Note: Follow step 7 to your computer as usual.

  Step 3:

  Make SFC scan and check if the problem persists.

• Error message bad image: DLL C:\WINDOWS\system32\mmebaetf.dll when you try to open any error of application & research settings in the Windows XP computer.

  Original title: msg error Searchsettings & bad Image problem

  How to solve the search parameters & bad image of my windows XP error message? Whenever I start my Windows I have error of search parameters, and if I try to open some applications like YM or CHROME or all the other apps, I received the following message.
  DLL C:\WINDOWS\system32\mmebaetf.dll. It's so disturbing. Please help me solve this.

  With respect,
  Rosaline.

  Hello Rosaline48,

  Thanks for the return of the response.  Have you tried to boot safe mode to see if you can reproduce this error when you try to open any program?  You have scanned your computer for malware or viruses?

  Safe mode:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Last good known Configuration:

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

• Error at startup of Windows 'msseces.exe - bad image. the application or dll program files\ microsoft security client\ sqmapi.dll c:\ is not a valid windows image... »

  MSSECES. EXE

  My mini HP netbook 110-1000 has now two screens same when I start, I am running windows xp. When I boot I get a box that says msseces.exe - bad image, it says inside the box of the application or dll program files\ microsoft security client\ sqmapi.dll c:\ is not a valid windows image. Please check this against your installation diskette. the netbook came with a floppy disk. programs are in the partitioned hard disk. the other thing, I noticed that it's my icon for security essentials is missing and I can't uninstall security essentials because it crashes when I try to uninstall, and then he asks me if I want to report to microsoft. e help thank you Gary.

  Hi Gary,.

  It seems that Microsoft Security Essentials has corrupted on your computer. You can uninstall and reinstall the program to check the issue.

  Step 1: Since you are facing problems of removal of the program, you can check the following thread and check if it helps.

  Uninstallation of MSE - Microsoft Answers

  Step 2: To reinstall, refer to the following.

  Virus, spyware & Malware Protection | Microsoft Security Essentials

  See also:

  Checklist for installation of Microsoft Security Essentials - Microsoft Answers

• I get the same error of bad image of dllc:\win\system32\atrace32.dll

  Original title: dllc:\win\system32\atrace32.dll bad image error

  I get the same error dllc:\win\system32\atrace32.dll bad image.  I tried to use the system restore (don't let me do).  I tried scanning with webroot antivirus (starts and detects but then gets the spyengine error. (I also have a ticket with webroot)... I sent a bunch of errors for you.  Help, please.  I can't take it anymore

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. when exactly you get this error message?
  4. what anti-virus software is installed on the computer?

  Maybe it's because the virus. Run Microsoft Safety Scanner and check.

  Alternatively, you can use the Microsoft Security Essentials software. Microsoft Security Essentials is an anti-malware solution for new, free consumption by your computer. It helps protect against software viruses, spyware and other malware. It is available as a free download for Windows XP SP2 and higher, Windows Vista and Windows 7.

  For more information visit: http://www.microsoft.com/security/pc-security/mse.aspx

• BAD IMAGE FILE: C:\WINDOWS\SYSTEM32\TOTUROBE. DLL

  Original title: BAD IMAGE FILE: C:\WINDOWS\SYSTEM32\TOTUROBE. DLL NEEDED TO REPAIR THE

  Send to * address email is removed from the privacy *.

  Its malware. Start in safe mode / networking. Download Malwarebytes update, then do a full scan