STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt and recovery XP says error during the extraction process. Details of error: path not found___
My friend turned on their laptop packard Bell recently and had the following problem. Windows XP screen loads but is then followed by a blue screen that says STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt. The header checksum does not match the checksum calculated.
I can't the laptop to go further. I have accessed the Microsoft recovery Panel and try a non-destructive recovery as there are some precious photos that need backup. However, when you select 'no profile' to begin the recovery, I get the message:
Error during the extraction process. Details of error: path not found
I'm a bit of a novice when it comes to this sort of thing, but if someone can provide step by step help giving rise to lose photos, I'd be willing to give it a try. I also have XP Home Edition disk that came with the laptop but has never been opened. Any help would be appreciated. Thank you
You hear your message said something about rpcrt4.dll? It is important to relay the exact message you see.
Please provide additional information on your system:
What is your system brand and model?
What is your Version of XP and the Service Pack?
Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
The question was preceded by a loss of power, aborted reboot or abnormal termination? (this includes the plug pulling, buttons power, remove the battery, etc.)
The afflicted system has a CD/DVD drive work?
You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?
You use some CD to access this Panel of Microsoft recovery where this "no profile" option is? I don't know what all this means if it isn't some CD shipped with your system, in which case, I would use it for a coaster instead of something to fix your system.
If the c:\windows\system32\rpcrt4.dll file is missing or afflicted, you do not start in the last good known Configuration.
You also will not start in any kind of Mode safe no more.
Even if you could boot mode safe, you would find that sfc/scannow does not work in Mode without failure in all cases (never). If you try it, you'll see a message like this:
Windows file protection could not initiate a scan of protected system files.
The specific error code is 0x000006ba [the RPC server is unavailable.].
Failed to start the RPC mode server safe either.
I can't recreate your error exactly, but it is easy to replace the rpcrt4.dll file. Looks like you have a working CD drive, so put yourself a Hiren boot CD and when you started on this, you can copy your precious files to a USB device for safety.
There should be a backup copy of rpcrt4.dll already on your system, here or here:
c:\Windows\System32\dllcache
c:\windows\ServicePackFiles\i386
You need to rename or replace the rpcrt4.dll file which is in c:\windows\system32 and replace it with one you will find the backup copies.
There should be a backup copy of rpcrt4.dll already on your system, here or here:
c:\Windows\System32\dllcache
c:\windows\ServicePackFiles\i386
When you get the Hiren's CD's, you can use to replace the missing or suspicious file. If you need help with that, first get the Hiren's boot CD made and start over, then we can continue.
Do you have a Hiren BootCD you can download here:
On the left, click on download, scroll down, choose the latest version, the download link is a little hard to see. It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):
Direct HTTP mirror + Torrent, Torrent Magnet
Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.
The ZIP file is large, so the download will take probably some time to complete. Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.
Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD. You must use software that includes how to burn a. ISO to a CD to create a bootable CD.
File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it. The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner. You can also use your own burning software as long as your software is able to create a bootable CD. ISO file. More modern burning programs can create a bootable CD. ISO image. Create a CD from an ISO image bootable is not the same as just the file on a CD burning.
If you need a simple and CD burning, this is a free software popular software:
Here are some instructions for ImgBurn:
http://Forum.ImgBurn.com/index.php?showtopic=61
It would be a good idea to test your new bootable CD on a computer running.
You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.
These adjustments are made before Windows tries to load. If you miss it, you will need to restart the system again.
When starting on the Hiren's CD, you will see a menu of options. Choose Mini XP. It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.
Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.
There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision)
Do, or do not. There is no test.
I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!
Tags: Windows
Similar Questions
-
How can I fix this error? I tried to solve it in Recovery Mode. Forgive me, but I'm kinda a noob. The installation is XP Professional. The BONE has been preloaded, so I don't have the original to load disc, but I have a XP Home disc. I ran chkdsk and removed all the disk errors, but I don't know how to extract a new XP disc atl.dll. Thanks for any help you can provide.
Ok.
XP has also keep copies of 3498 critical files on the folder c:\windows\system32\dllcache (for future use). If Windows File Protection detects one of them is missing, it will try to quickly and quietly replace the copy in the dllcache folder. The atl.dll is one of these files monitored in the list (Yes - there is a list).
You can copy the missing files to this folder by using the Recovery Console too.
Depending on your installation, you can also get copies of missing files here:
c:\c:\windows\ServicePackFiles\i386
The file should never miss, so if yours had disappeared, I suspect your asked for but unspecified app antivirus/antimalware quarantined (effectively deleted) file.
AVG, Avira, Avast?
You should check the dllcache folder and if the file is not there, paste a copy there too so PAM has a backup if ever, replace it.
-
olecnv32.dll is possibly corrupt. The header checksum does not have the calculated checksum
When I tried to start the desktop computer with Windows XP operating system, I get the message "olecnv.dll is possibly corrupt. ' the checksum of header not the checksum calculated. the screen will not forward.
Please advise to Prime the system.
Udaya
If the olecnv32.dll file is corrupted, you will see an error like this:
STOP: c0000221 {Bad Image Checksum}
Olecnv32.dll image is possibly corrupt. The header checksum does not match the checksum calculated.Curiously, if the file is completely absent or has a length of zero byte XP will start just fine without it.
Given that it is one of 3498 files Windows File Protection deals with, it must be another copy of the file on your system is the dllcache folder.
As Wunders says you can make a Hiren boot CD and Mini XP mode, see if you can find a copy of the file in one of these folders (assuming that XP is installed on your C drive):
c:windows\system32\dllcache
c:\windows\ServicePackFiles\i386If you can find a copy, rename your a suspect and replace it with the copy and see what things look like.
If you can't find a copy, there is one on my SkyDrive, you can download and network disks to the system afflicted by using a Flash DRIVE or a floppy disk. You should always use Hiren for this method.
If that all sounds complicated to and you do not have a genuine XP installation CD bootable from where you can start in the XP Recovery Console, you can create a bootable XP Recovery CD of Console and see if you can replace the file from there to the replace. I can send you instructions if you need to know how to do this.
I hear Support Engineer "experts" hired by Microsoft, which suggests that you run sfc/scannow to replace the file missing, but that won't work because this is what sfc/scannow does, this isn't how it works and it's not what it is for. I know that it does not replace the file because I tried.
If you need to download the file, here's how:
I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).
You can download it and when you do, place a copy of the file in these folders (assuming that Windows is installed on your C drive):
c:\Windows\System32
c:\Windows\System32\dllcache (this is where XP keeps backups of important files).Here is the link to my SkyDrive and you can get the file you need here:
https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311
When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.
When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.
You can download the file without the extension, and then rename the file to add the appropriate extension. You do not want to use a file called olecnv32 when the name of the file should really be called olecnv32.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.
You then put the downloaded files in the correct folders on your system.
-
original title: Skyrim .dll error
When I press play on the Skyrim Launcher button, nothing happens. I tried to open the folder and run the TESV.exe and got an error message saying "TESV.exe - bad Image. d3dx9_42.dll not is either not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the software vendor"I run Windows 7 Ultimate, and I've updated all my drivers and directX and uninstalled and reinstalled Skyrim repeatedly. I replaced the DLL in question and also organize sfc/scannow. Nothing seems to work, I tried all of the solutions I found online, nothing helps.I really want to start playing this game... huge fan of Elder Scrolls...
Hi MattHamlyn,
1. did you do with the last changes made to your computer before this show?
2 you are logged as administrator?
3 you are installing the game online or using a CD/DVD?
I suggest you to follow the steps below and check.
Method 1:
I guess that your operating system is Windows 7 64 bit.
1. click on the Start button.
2. Select computers
3. click on your C: drive
4 program Files (x 86)
5 steam
6 Steamapps7 common
8 Skyrim
9 TESV
TESV is the game itself.Method 2: put the computer to boot and check if you can play the game:
http://support.Microsoft.com/kb/929135
Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
I hope this helps.
Thank you.
-
When my computer is updated before stopping, my friend, turning off the laptop. Now, my laptop does not work. He said dose explore window does not. I can not open any program. What should I do? Please help me. Thank you
Hi TaiNguyen95,
· Have updates you installed?
· What is the full error message?
Follow the steps provided by Keith from the link.
-
I downloaded my CSDesignWebPremium and when I tried to mount the drive - a 'DesignWebPremium, _CS6_LS16.dmg' says error message not recognized
(I use a MAC 2.6 GHz Intel Core i7 (16 GB 1600 MHz DDR3) OSX 10.7.5)
Squasha9, it seems that the downloaded DMG is corrupt. Where you downloaded the installation files from? You can download a copy of produced CS6 downloadinstallation files.
-
ERROR ORA-12514: TNS: could not start the extraction process
Hi Experts,
I have installed Oracle Golden Gate in the slot environment. But failed to start the extraction process
Main site (source): it is production DB up and running.
RAC 2 nodes
Oracle RAC 11.2.0.1.0
ASM
Oracle GoldenGate 11g Release 1 (11.1.1.0.0)
Enterprise Linux Server version 5.5 (Carthage)
X 64 processor type
64-bit operating system
target Site (destination):
Single stand-alone server - no CARS
Version 11.2.0.1.0 Oracle
ASM
Oracle GoldenGate 11g Release 1 (11.1.1.0.0)
Enterprise Linux Server version 5.5 (Carthage)
X 64 processor type
64-bit operating system
Getting error in newspapers below while starting the extraction process:
[oracle @ ggate] $RECOVERY: reset to initial or altered checkpoint. 2012-08-05 10:34:10 ERROR OGG-00868 Oracle GoldenGate Capture for Oracle, aaa.prm: Attaching to ASM server asm: (12514) ORA-12514: TNS:listener does not currently know of service requested in connect descriptor. 2012-08-05 10:34:10 ERROR OGG-01668 Oracle GoldenGate Capture for Oracle, aaa.prm: PROCESS ABENDING.
Getting error below when connecting with the instance asm directly:
AMT Ping utility for Linux: Version 11.2.0.1.0 - Production on August 5, 2012 11:55[oracle@ admin]$ sqlplus sys@asm as sysasm SQL*Plus: Release 11.2.0.1.0 Production on Sun Aug 5 11:16:11 2012 Copyright (c) 1982, 2009, Oracle. All rights reserved. Enter password: ERROR: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor [oracle@ ~]$ tnsping asm
: 42
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Use settings files:
TNSNAMES adapter used to resolve the alias
Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = xxx-
Scan) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = ASM) (I
NSTANCE_NAME = + ASM1)))
OK (0 msec)Any help Please ? Regards LazyDBA Edited by: LazyDBA11g on Aug 5, 2012 12:14 AM Edited by: LazyDBA11g on Aug 5, 2012 11:25 PM Edited by: LazyDBA11g on Aug 12, 2012 4:36 AMIt should help you to TRANLOGOPTIONS ASMUSER
http://oracleabout.blogspot.com/2012/06/GoldenGate-on-ASM-GoldenGate-on-RAC.html
-
Received a stop: C000007b (bad picture) at the start of windows XP load
I can't get my netbook at startup. Once the windows logo starts and loads the screen goes black, then the message on blue screen appears. STOP: C000007b (bad picture)? \C:\windows\system32\csrv.dll is not a valid image. I have made several attempts with f2, f8, f11 and f12.
Hi Ed,
Try to press F8 when when the FN key is on and once when it is off to see if it is causing the problem.
-
__C:\Windows\system32\AVGRSSTX bad Image. DLL
He says that it is not designed to run on windows or it contains an error, this box appears each time I open a program, it also says bad Image. Please help someone
Thank you for taking the time to respond, it seems good that my hard drive is kaput, so all your suggestions have not worked. Calculate offshore to be repaired, thanks again
-
* Program.exe bad Image; Odbc32.dll
Started having a problem with the calibration of color (DataColor Spyder). When I try to run the program, I get a message "ProfileChooser.exe - bad Image", followed by C;\Windows\systewm32\ODBC32.dll is either not designed to run on Windows or it contains an error. Try reinstalling the program... DataColor can't identify the problem; and I just noticed that I get similar messages when I plug in an external drive SeaGate. I have tried ScanNow, System Restore, registry cleaners, removal/replacement of ODBC - 32.dll, remove and reinstall the calibration software, etc. I'll try a backup, but it does not :-( Suggestions welcome!
For anyone with a similar problem, this repair worked. I got a copy of Win 7 Home Premium retail and he ran like an 'upgrade' on my Dell laptop. When installing asked the "product code", I used the OEM code on the underside of the computer instead of the code provided with the software. Almost everything came as it was before. just the wallpaper needed to be reset to zero and a lot of updates to do. In retrospect, I think I could have upgraded to Win 7 Professional without any problem.
-
How can I stop the extraction process?
How can I stop an extraction process it takes hours and I can't wait much longer, the break and cross symbols will not work. I think that I tried to save it in the wrong place.
See if using the task management system is able to shut it down.
Task Manager - PC: (CTRL-ALT-DEL) http://support.microsoft.com/kb/323527
Mac - Activity Monitor: http://osxdaily.com/2010/08/15/mac-task-manager/
You can also try to stop the machine.
-
When I press the 'to' on the e-mail domain, all my contacts appear. However, at the end of the show 5 contacts list that are not my contacts! I checked my list of contacts and they do not appear. So so I can't delete them. My question is, how to remove? I took a page if someone wants to see it. Any help will be appreciated.
I'm going to assume that contact names you see may be something you do not want to reveal, perhaps something like "Drunkgirlroom".
It is a waiting Group network Invitation causing your problem. To resolve this issue, you must decline the Invitation by following these steps:
1. click on Contacts.
2. click on discovers invitations.
3. click on groups.
4. click on No, thank you.For reference, see the following:
I hope this helps.
-
Satellite L850 bad DVD size and recovery media creator error empty
Hello
I just bought my L850 Satellite today and I found that Windows Explorer reads a 4.7 GB blank as 1.3 GB, then creator of recovery media DVD return error code 0E01D0-3D-00000000.I'm afraid that my laptop DVD drive is broken! Are there any suggestions?
Hello
Don t think that your ODD drive is defective.
Fact is that there is always a problem of compatibility between the discs and the ODD.
As far as I know manual usage provides some info on well tested and compatible CD and DVD.Recommend using a disc that were the compatibility has been tested.
In addition, I recommend standard R TDK. My experience has been good in using these discs -
Login to the extraction process
Hello
I'm new on goldengate and have a basic question about oracle for oracle replication.
An extract and process repeated, we need, to connect to the source and target database. As he reads by gg source redo log file then why does log in the source system? It cannot directly read redo log files? on the target system because it applies it seems to be fine.
Please suggest...
Kind regards!How does he know where the redo logs are? Or the archived redo logs? Or names, or what are the SNA to the breast?
-
message of this I why / why I have this message?
"Costs of en path (s) not taken:
/ Apple-Touch-Icon - precomposed.png,.
' / apple-touch - icon.png ".
Of don't waste time with this problem which seems to come from Safari.
Look at if by putting another browser by default (Chrome), alert is returned.
You can continue with Safari, this alert will go out alone.
Archive : error paths not supported
Maybe you are looking for
-
When the portable computer connection, battery can not be charged
I just bought my phone yesterday and when I plugged in... the battery can not be charged
-
Strange behavior of the mouse after installing the updated driver
Hello Windows Update suggested that I update the mouse and/or the keyboard driver detection. I don't remember the exact message. Also, I find no trace of this update in the box "Installed updates". It seems that the driver updates are not included. S
-
I am trying to create a bar of pie chart in Excel 2003. I am able to insert my data and create the graph, but I need to put the "SplitValue' for 6. I was able to find the property to achieve this, but I get an error when I run the vi (see table). An
-
ea6900 causes of latency in DOUBLES. compared to the modem.
have a latest firmware ea6900. the router double my time of latency in all online activities. I live in massachusetts, this is what it's like. with ea6900 + modem 40-60ms Newyork City 40-60ms Chicago router ea6900 interrupt and Modem connected direct
-
original title: no matter what I try, I get this ox80070246? Help I am at the end of the roll, I tried all the things on the forum, no matter what I do I get 0x80070426, I put in my 25 digit code provided with my computer and it say to me that the co