Bad LBAs appearing on newspaper

Hi all

I have a Dell PowerEdge 2900 which log shows bad LBA for physical disk 01. These bad LBAs have appeared in journal 02/11/16 at 02/16/16.

In Dell OpenManage, everything has a green check marks.

Here's a copy paste log controller showing the bad LBA:

11/02/16 0:42:43: EVT #59094-02 / 11 / 16 0:42:43: 113 = feel unexpected: PD 01 (e0x20/s1) path 5000c5003997d5b5, CDB: 28 00 01 22 97 3 a 00 00 08 00, meaning: 11/03/00
11/02/16 0:42:43 : sens Raw pour PD 1 : f0 00 03 01 22 97 3 b 0 a 00 00 00 00 11 00 81 80 00 97
11/02/16 0:42:43: DEV_REC:Medium Error DevId [1] retired Tgt 1 RDM = a08c5200 = 0
11/02/16 0:42:43: MedErr is for: cmdId = ee, ld = 0, src = 1, cmd = 11, lba = 122973 a., cnt = 8, rmwOp = 0
11/02/16 0:42:43: ErrLBAOffset (1) LBA(122973a) BadLba = 122973 b
11/02/16 0:42:45: EVT #59095-02 / 11 / 16 0:42:45: 113 = feel unexpected: PD 01 (e0x20/s1) path 5000c5003997d5b5, CDB: 28 00 01 22 97 3 a 00 00 08 00, meaning: 11/03/00
11/02/16 0:42:45 : sens Raw pour PD 1 : f0 00 03 01 22 97 3 b 0 a 00 00 00 00 11 00 81 80 00 97
11/02/16 0:42:45: DEV_REC:Medium Error DevId [1] retired Tgt 1 RDM = a0710600 = 0
11/02/16 0:42:45: MedErr is for: cmdId = ee, ld = 0, src = 1, cmd = 1, lba = 122973 a., cnt = 8, rmwOp = 0
11/02/16 0:42:45: ErrLBAOffset (1) LBA(122973a) BadLba = 122973 b
11/02/16 0:42:45: EBB_RecoverReadErrors: question WV for pd = 01, lba = 122973b
11/02/16 0:42:45: show writing check pd = 01, physArm = 1, span = 0, blk = 122973b
11/02/16 0:42:45: EVT #59096-02 / 11 / 16 0:42:45: 110 = average error corrected during PD 01 (e0x20/s1) recovery to 122973 b
11/02/16 16:37:14: EVT #59097-02 / 11 / 16 16:37:14: 113 = feel unexpected: PD 01 (e0x20/s1) path 5000c5003997d5b5, PEH: 2 a 00 00 f6 50 3 a 00 00 38 00, meaning: 3/0 c/00
11/02/16 16:37:14: feel Raw for PD 1: f0 00 03 00 f6 50 60 0 a 00 00 00 00 00 01 80 00 89 0c
11/02/16 16:37:14: DEV_REC:Medium Error DevId [1] retired Tgt 1 RDM = a0835600 = 0
11/02/16 16:37:14: MedErr is for: cmdId = 41F, ld = 0, src = 7, cmd = 2, lba = f65000, cnt = 80, rmwOp = 0
11/02/16 16:37:14 :-> DelWrite: dirtyArms = 7, badPhys = ff - ff
11/02/16 16:37:14: ErrLBAOffset (26) LBA (f6503a) BadLba = f65060
11/02/16 16:37:14: writing MED ERR! ErrLBA (26) LBA (f6503a)
11/02/16 18:13:24: EVT #59098-02 / 11 / 16 18:13:24: 113 = feel unexpected: PD 01 (e0x20/s1) path 5000c5003997d5b5, CDB: 28 00 01 21 c7 00 00 36 00 ca, meaning: 11/03/00
11/02/16 18:13:24 : sens Raw pour PD 1 : f0 00 03 01 21 c7 db 0 a 00 00 00 00 11 00 81 80 00 97
11/02/16 18:13:24: DEV_REC:Medium Error DevId [1] retired Tgt 1 RDM = a068ca00 = 0
11/02/16 18:13:24: MedErr is for: cmdId = 3df, ld = 0, src = 1, cmd = 11, lba is 121c7ca, cnt = 80, rmwOp = 0
11/02/16 18:13:24: ErrLBAOffset (11) LBA (121c7ca) BadLba = 121c7db
11/02/16 18:13:26: EVT #59099-02 / 11 / 16 18:13:26: 113 = feel unexpected: PD 01 (e0x20/s1) path 5000c5003997d5b5, CDB: 28 00 01 21 c7 00 00 36 00 ca, meaning: 11/03/00
11/02/16 18:13:26 : sens Raw pour PD 1 : f0 00 03 01 21 c7 db 0 a 00 00 00 00 11 00 81 80 00 97
11/02/16 18:13:26: DEV_REC:Medium Error DevId [1] retired Tgt 1 RDM = a05cba00 = 0
11/02/16 18:13:26: MedErr is for: cmdId = 3df, ld = 0, src = 1, cmd = 1, lba is 121c7ca, cnt = 80, rmwOp = 0
11/02/16 18:13:26: ErrLBAOffset (11) LBA (121c7ca) BadLba = 121c7db
11/02/16 18:13:26: EBB_RecoverReadErrors: question WV for pd = 01, lba = 121c7db
11/02/16 18:13:26: show writing check pd = 01, physArm = 1, span = 0, blk = 121c7db
11/02/16 18:13:26: EVT #59100-02 / 11 / 16 18:13:26: 110 = average error corrected during PD 01 (e0x20/s1) recovery at 121c7db
11/02/16 18:13:28: EVT #59101-02 / 11 / 16 18:13:28: 113 = feel unexpected: PD 01 (e0x20/s1) path 5000c5003997d5b5, CDB: 28 00 01 21 c9 00 00 00 4 a 00, feel: 11/03/00
11/02/16 18:13:28 : sens Raw pour PD 1 : f0 00 03 01 21 c9 0 a 04 00 00 00 00 11 00 81 80 00 97
11/02/16 18:13:28: DEV_REC:Medium Error DevId [1] retired Tgt 1 RDM = a06cd000 = 0
11/02/16 18:13:28: MedErr is for: cmdId = 173, ld = 0, src = 1, cmd = 11, lba is 121c8ca, cnt = 80, rmwOp = 0
11/02/16 18:13:28: LBA (121c900) ErrLBAOffset BadLba (4) = 121 c 904
11/02/16 18:13:29: EVT #59102-02 / 11 / 16 18:13:29: 113 = feel unexpected: PD 01 (e0x20/s1) path 5000c5003997d5b5, CDB: 28 00 01 21 c9 00 00 00 4 a 00, feel: 11/03/00
11/02/16 18:13:29 : sens Raw pour PD 1 : f0 00 03 01 21 c9 0 a 04 00 00 00 00 11 00 81 80 00 97
11/02/16 18:13:29: DEV_REC:Medium Error DevId [1] retired Tgt 1 RDM = a076bc00 = 0
11/02/16 18:13:29: MedErr is for: cmdId = 173, ld = 0, src = 1, cmd = 1, lba is 121c8ca, cnt = 80, rmwOp = 0
11/02/16 18:13:29: LBA (121c900) ErrLBAOffset BadLba (4) = 121 c 904
11/02/16 18:13:29: EBB_RecoverReadErrors: question WV for pd = 01, lba = 121 c 904
11/02/16 18:13:29: show writing check pd = 01, physArm = 1, span = 0, blk = 121 c 904
11/02/16 18:13:30: EVT #59103-02 / 11 / 16 18:13:30: 110 = average error corrected during PD 01 (e0x20/s1) recovery to 121C 904
11/02/16 18:40:20: EVT #59104-02 / 11 / 16 18:40:20: 113 = feel unexpected: PD 01 (e0x20/s1) path 5000c5003997d5b5, CDB: 28 00 00 80 00 00 32 00 4th f6, feel: 11/03/00
11/02/16 18:40:20 : sens Raw pour PD 1 : f0 00 03 00 f6 4e 9 b 0 a 00 00 00 00 11 00 81 80 00 97
11/02/16 18:40:20: DEV_REC:Medium Error DevId [1] retired Tgt 1 RDM = a08f2400 = 0
11/02/16 18:40:20: MedErr is for: cmdId = 80, ld = 0, src = 1, cmd = 11, lba is f64e32, cnt = 80, rmwOp = 0
11/02/16 18:40:20: ErrLBAOffset (1B) LBA (f64e80) BadLba = f64e9b
11/02/16 19:36:35: EVT #59105-02 / 11 / 16 19:36:35: 113 = feel unexpected: PD 01 (e0x20/s1) path 5000c5003997d5b5, CDB: 2A 00 01 06 29 ca 00 00 36 00, meaning: 3/0 c/00
11/02/16 19:36:35: feel Raw for PD 1: f0 00 03 01 06 29 d5 0 a 00 00 00 00 00 01 80 00 2nd 0c
11/02/16 19:36:35: DEV_REC:Medium Error DevId [1] retired Tgt 1 RDM = a070fa00 = 0
11/02/16 19:36:35: MedErr is for: cmdId = 426, ld = 0 src = 7, cmd = 2, lba = 1062980, cnt = 80, rmwOp = 0
11/02/16 19:36:35 :-> DelWrite: dirtyArms = 7, badPhys = ff - ff
11/02/16 19:36:35: ErrLBAOffset (b) LBA(10629ca) BadLba = 10629 d 5
11/02/16 19:36:35: writing MED ERR! ErrLBA (b) LBA(10629ca)
12/02/16 02:33:11: EVT #59106-02 / 12 / 16 2:33:11: 113 = feel unexpected: PD 01 (e0x20/s1) path 5000c5003997d5b5, CDB: 28 00 00 db 92 00 00 6F 00 d1, feel: 11/03/00
12/02/16 02:33:11 : sens Raw pour PD 1 : f0 00 03 00 db d1 a8 0 a 00 00 00 00 11 00 81 80 00 97
12/02/16 02:33:11: DEV_REC:Medium Error DevId [1] retired Tgt 1 RDM = a06e7000 = 0
12/02/16 02:33:11: MedErr is for: cmdId = 4 d, ld = 0, src = 1, cmd = 11, lba is dbd192, cnt = 80, rmwOp = 0
12/02/16 02:33:11: ErrLBAOffset (16) LBA (dbd192) BadLba = dbd1a8
12/02/16 02:33:13: EVT #59107-02 / 12 / 16 2:33:13: 113 = feel unexpected: PD 01 (e0x20/s1) path 5000c5003997d5b5, CDB: 28 00 00 db 92 00 00 6F 00 d1, feel: 11/03/00
12/02/16 02:33:13 : sens Raw pour PD 1 : f0 00 03 00 db d1 a7 0 a 00 00 00 00 11 00 81 80 00 97
12/02/16 02:33:13: DEV_REC:Medium Error DevId [1] retired Tgt 1 RDM = a0526000 = 0
12/02/16 02:33:13: MedErr is for: cmdId = 4 d, ld = 0, src = 1, cmd = 1, lba is dbd192, cnt = 80, rmwOp = 0
12/02/16 02:33:13: ErrLBAOffset (15) LBA (dbd192) BadLba = dbd1a7
12/02/16 02:33:13: EBB_RecoverReadErrors: question WV for pd = 01, lba = dbd1a7
12/02/16 02:33:13: show writing check pd = 01, physArm = 1, span = 0, blk = dbd1a7
12/02/16 02:33:13: EVT #59108-02 / 12 / 16 2:33:13: 110 = average error corrected during PD 01 (e0x20/s1) recovery at dbd1a7
13/02/16 0:41:02: EVT #59109-02 / 13 / 16 0:41:02: 113 = feel unexpected: PD 01 (e0x20/s1) path 5000c5003997d5b5, PEH: 2 a 00 00 and 23 22 00 00 08 00 f5, meaning: 3/0 c/00
13/02/16 0:41:02: feel Raw for PD 1: 00 03 00 23 f5 28 f0 0 a 00 00 00 00 00 01 80 00 89 0c
13/02/16 0:41:02: DEV_REC:Medium Error DevId [1] retired Tgt 1 RDM = a06d7200 = 0
13/02/16 0:41:02: MedErr is for: cmdId = 490, ld = 0 src = 7, cmd = 2, lba is 23f500, cnt = 80, rmwOp = 0
13/02/16 0:41:02 :-> DelWrite: dirtyArms = 7, badPhys = ff - ff
13/02/16 0:41:02: ErrLBAOffset (6) LBA (23f522) BadLba = 23f528
13/02/16 0:41:02: writing MED ERR! ErrLBA (6) LBA (23f522)
13/02/16 01:59:33: EVT #59110-02 / 13 / 16 1:59:33: 113 = feel unexpected: PD 01 (e0x20/s1) path 5000c5003997d5b5, CDB: 28 00 01 21 c7 00 00 a2 feel 5th 00: 11/03/00
13/02/16 01:59:33 : sens Raw pour PD 1 : f0 00 03 01 21 c7 cc 0 a 00 00 00 00 11 00 81 80 00 97
13/02/16 01:59:33: DEV_REC:Medium Error DevId [1] retired Tgt 1 RDM = a0800e00 = 0
13/02/16 01:59:33: MedErr is for: cmdId = 26th, ld = 0, src = 1, cmd = 11, lba is 121c7a2, cnt = 80, rmwOp = 0
13/02/16 01:59:33: BadLba LBA (121c7a2) ErrLBAOffset (2A) = 121c7cc
13/02/16 01:59:35: EVT #59111-02 / 13 / 16 1:59:35: 113 = feel unexpected: PD 01 (e0x20/s1) path 5000c5003997d5b5, CDB: 28 00 01 21 c7 00 00 a2 feel 5th 00: 11/03/00
13/02/16 01:59:35 : sens Raw pour PD 1 : f0 00 03 01 21 c7 cc 0 a 00 00 00 00 11 00 81 80 00 97
13/02/16 01:59:35: DEV_REC:Medium Error DevId [1] retired Tgt 1 RDM = a0734e00 = 0
13/02/16 01:59:35: MedErr is for: cmdId = 26th, ld = 0, src = 1, cmd = 1, lba is 121c7a2, cnt = 80, rmwOp = 0
13/02/16 01:59:35: ErrLBAOffset (2A) LBA (121c7a2) BadLba = 121c7cc
13/02/16 01:59:35: EBB_RecoverReadErrors: question WV for pd = 01, lba = 121c7cc
13/02/16 01:59:35: show writing check pd = 01, physArm = 1, span = 0, blk = 121c7cc
13/02/16 01:59:35: EVT #59112-02 / 13 / 16 1:59:35: 110 = average error corrected during PD 01 (e0x20/s1) recovery at 121c7cc
16/02/16 18:01:53: #59113-02 EVT / 16 / 16 18:01:53: 113 = feel unexpected: PD 01 (e0x20/s1) path 5000c5003997d5b5, CDB: 28 00 01 05 d7 b2 00 00 00 4F, feel: 11/03/00
16/02/16 18:01:53 : sens Raw pour PD 1 : f0 00 03 01 05 d7 e3 0 a 00 00 00 00 11 00 81 80 00 97
16/02/16 18:01:53: DEV_REC:Medium Error DevId [1] retired Tgt 1 RDM = a07e8400 = 0
16/02/16 18:01:53: MedErr is for: cmdId = 22 b, ld = 0, src = 1, cmd = 11, lba is 105d7b2, cnt = 50, rmwOp = 0
16/02/16 18:01:53: ErrLBAOffset (31) LBA (105d7b2) BadLba = 105d7e3

I intend keeping an eye on the controller log and running an analysis of consistency check soon.

Don't you think that the disc is a failure?

Thanks for the help!

Hello.

Looks like the average of errors on the existing LBA on the PD 01 have been corrected. Ensure that the controller and the drives hard firmware is up to date. Go head check consistency, a race of diagnoses and a review for more information.

Tags: Dell Servers

Similar Questions

  • Signs of bad keyboard appears on the Satellite A100-237

    I have two buttons on my keyboard that doesn't work well.
    where when I press shift + 2 this letter appears not ("") (@) and vice versa
    I don't know if it's a software issue or a hardware issue. This problem I found it when I bought
    my laptop (Toshiba Satellite A100-237)

    Hello

    From your description, it must be bad for the keyboard input language. I think that, in your case, it is set to ENGLISH UK and must be set to the ENGLISH of the United States.

    If you want to know how to configure regional and language support control please this page http://www.microsoft.com/windowsxp/using/setup/expert/reginalsup.mspx

    Good bye

  • Style of Twitter seems bad, fonts appear invisible

    After the Firefox update to 11, it seems that the fonts are 'invisible' when I go to Twitter.com (it's the only site of this day where I noticed that happening). It seems that certain letters appear, such as "N" and "l". Is not right on the home page, if I connect it continues through the site. I am on Windows 7 and have not done more changes on my computer lately (no new program, no new Firefox plugins).

    Firefox 11: http://i.imgur.com/Pc2Bd.jpg
    Google Chrome: http://i.imgur.com/8i8j7.jpg

    If you go in Firefox, then Options button, click Advanced Options, then uncheck the "Use hardware acceleration" checkbox and restart Firefox, does make a difference?

  • Unable to reply to messages in Hotmail - "Bad request" appears in the section of the Hotmail page response.

    Having an intermittent problem (90% of the time) by creating and answering emails in Hotmail. We read emails OK and trying to write or reply to an email all other aspects of the page are very good (menus, to:, CC:, subject of boxes etc.) except for the box where you type the email. It's filled with the term 'bad request '.
    Works fine in IE and I tried Firefox trick of clearing cookies/cache and tried the mode without failure of Firefox without result. This has been a problem for about four days and it does not coincide with the Firefox updates to the best of my knowledge.
    Any help appreciated. Thank you

    The sollution is indead the Https Protocol, you need to change when you connect with firefox.

  • Satellite Pro 6100: message "RTC bad battery appears, check CMOS.

    When I move my 6100 SP it freezes, and then when it is restarted the message "bad RTC battery is displayed, check CMOS. I also noticed that when the machine hangs the fan operates at high speed and the bottom of the machine and the keyboard gets very hot.
    Need your advice.

    Hello

    Did you change or replace the RTC battery?
    The error message looks like a death or a bad RTC battery.
    You should try to charge the battery (plug the AC adapter / CC)
    Try to enter the BIOS setup and check all options. You can set the BIOS default settings.
    Check if it helps. If it's not, so I guess there is something wrong with the RTC battery and it should be changed.

  • Bad sign appears urgent keyboard buttons on the Satellite L series

    I recently bought the Satellite L series above, and when I learned typing on the keyboard of some buttons seem to do things that they should not for example a lag and 2 should be "but its actually @ and shift and @ should be but is actually". ""

    Can I change it in the settings?

    Thank you
    Matt

    Hello

    You can change the input language, perhaps evil was created.

    Visit this microsoft support for more information on how to change the keyboard input language:

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/win_kbd_overview.mspx?mfr=true (for XP)
    http://windowshelp.Microsoft.com/Windows/en-us/help/baf302f4-F157-4E41-A627-6ed68d1352bc1033.mspx (for Vista)

    It can be useful :)

    Welcome them

  • Spooler Subsystem App stopped working again and Flashplayer of MSG plugin_11_4_402_287.exc bad image appears whenever I do anything

    Adobe flash plugin is still crashing. I reinstalled 3 times today and a little while later it crashes again.
    Message reads Windows\system32\WINSTA.dll C: is not designed to run on windows or it contains an error.
    Try reinstalling the program.
    So I do, and I did, read a bit on internet to see that others have the same error and I thought to upgrade to windows 7, as it's almost time to do so if I see that people have same problem with windows 7 and this plugin.

    The question did not get resolved or is there a solution that I have not yet found

    Hello

    Try with the new user account.

    http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

    try to uninstall and reinstall the Flashplayer completely from the BONE and check out them.

    http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html

  • splwow64.exe - bad image appears. I can't print any program since SP1 was installed.

    The exact popup is

    C:\windows\system32\spool\drivers\x64\3\unidrvui.dll is not designed to run on Windows or it contains an error.  Try to install the program by using the original installation media or contact your system administrator or the provider of software for support.

    It started just with all programs to print since SP1 was installed.  What can I do?

    I had the same problem (except with another dll, PS5UI.dll). I don't know what that important the. / 3 directory path was, as C:\windows\system32\spool\drivers\x64 seems to contain similar DLLs. What fixed it for me was that (I'll keep this core).

    -First off, make sure that you are on an account admin (if not, talk to the administrator of your computer)
    -Navigate to C:\Windows\System32
    -In the search bar, type your name in the DLL
    (for me, it was once again PS5UI.dll, you probably "unidrvui.dll")
    -If you're lucky, you should have results, mine were:
    A copy with size 828 KB
    C:\Windows\System32\DriverStore\FileRepository\ntprint.inf_amd64_neutral_4616c3de1949be6d\Amd64
    A copy with size 828 KB
    C:\Windows\System32\spool\drivers\x64
    and a copy in the directory of law, but of size 0 KB!
    C:\Windows\System32\spool\drivers\x64\3
    -If you have a no result in. \3 or it's size zero, this method may work for you. Copy a version of size not null of the dll (if there are several sizes, use of DriverStore) to the. \3 directory under C:\Windows\System32\spool\drivers\x64.
    -If you don't know how to do this, open a window and go to:
    C:\Windows\System32\spool\drivers\x64\3
    -Then right click on the dll in the search results (again, DriverStore preferably) and select "copy".
    -Then paste the C:\Windows\System32\spool\drivers\x64\3 dll. Note that you need administrator privileges. A pop-up window requesting permission, click 'OK' or Yes.
    TL; DR (too long, didn't read) copy a working version of the store driver to C:\Windows\System32\spool\drivers\x64\3.
    If it works for you, please post again. If this isn't the case, put the problem.

  • Bad color appears when you use the color replacement tool.

    I use this tool in CS4 on an image with a transparent background.

    When I set the foreground color of R165 G165 B165 and apply, the resulting color on my image is R64 B64 G64. Any ideas why please?

    Replace color seems an unsuitable approach to the task.

    «If you have transparency anyway just lift the part on a clean diaper (make a selection with the rectangular selection tool, layer > New > layer by cutting) and apply the layer Style "Chromakey".»

  • my e-mail does not appear on this pc. It shows on my other pc

    my emails do not appear on this pc. my other pc has all my emails.

    Hello, any help here: Web sites look bad or appear differently than they should?

  • When opening my e-mail address, the E-mail entire table up and down for about 5 seconds. Because of the motion, I opened that badly. How to stop this movement?

    I use ASUS computer laptop and windows 7. When I opened my e-mail, the whole e-mail message table continues to move vertically for about 5 seconds and would then become immobile. Then only I can select a message and open. When I'm done with the reading of a message, and close it, it goes up and down motion again. Because of this instability, sometimes I open or delete the wrong message. What is the problem, can anyone help?

    First of all, update Firefox 16.0.1. Update Firefox to the latest version

    Then, try to read Web sites look bad or appear differently than they should and Refresh Firefox – reset settings and Add-ons. This could be just pictures of loading slowly, you have a slower internet connection with this computer?

  • Why didn't - not the attribute Value of entry forms of html text that displays in FF? It appears properly in Chrome-21, IE8, opera 12

    testing simple form html as follows:

    < style type = "text/css" >
    < / style >

    < form >
    User name: < input name = "username" type = "text" value = "Enter name here" >

    Text for the "value" attribute "Enter name here" displayed in the rendering of page in FF 15.0.1, but not very well in other browsers mentioned.

    < / make >

    Hi well, when I come to put these two lines in a .html file, it works for me. could you try doing the troubleshooting steps at the Web sites look bad or appear differently than they should or reset firefox...

  • Adblock Plus "permenantly" changed the appearance of many websites. How can I get the "normal"?

    Adblock Plus a "permenantly" has changed the appearance of many websites (e.g., google.com). I would like to illustrate this, but I can't find how to add jpg files to this issue.

    I have erased the max of Firefox, removed Adblock Plus, reloaded Firefox (v12). Nothing seems to help. The newly installed Firefox "remembers" the same damaged look of Web sites.

    How can I recover the 'normal' appearance for Web sites.

    If you read the article sites look bad or appear differently than they shouldand follow all the steps, does that help? You can add a screenshot by clicking on the "Add Images:" at the bottom of this page.

  • How can I get my favorites appears on my phone once I completed the synchronization process?

    I have my cell phone with my Office Firefox sync-ed, and my favorites are not displayed in the drop-down list bookmark. I rebooted my phone, and they do not always appear. What can I do to get my favorites to appear?

    Too bad, they appear suddenly.

  • Receives RUNDll32.exe - error bad Image to start Windows XP.

    Original title: RUNDll32.exe - bad Image.

    At startup "Rundll.exe bad Image ' appears

    I found the file RUNDLL32 on the Windows XP Pro CD

    How can I replace the bad image version in my computer

    This is caused by viruses or other such pest that is already active on your computer, or which may have been badly removed (deleted without removing his boot entry).

    Run a Malwarebytes scan on your computer: http://www.malwarebytes.org/

    Clean your Temp files, parasites often hide in temporary locations.  CCleaner is a very good tool for the removal of temporary files: http://www.piriform.com/ccleaner

    Do NOT use the function of registration of Ccleaner cleaning, registry cleaners are next few completely useless and mostly they cause more harm than good, they have a fix for the non-existent problems, at best they do nothing to improve performance, and at worst, they cause problems that did not exist previously.

    John

Maybe you are looking for

  • I poured the juice on my macbook air

    So I poured the juice on my macbook there was not that much and I spilled juice on it before, but this time was different cos he really turned off that it self but anyway I panicked and I started to panic and I shook it and then I found online that y

  • How to change security issues using alternate email address

    How to change security issues using e-mail. That you send e-mail to?

  • Pavlion DV7-6166: I have a dv7-6166 with a truevision webcam which windows 10 does not see

    I have a Povlion DV7-6166 the webcaam never worked I got this computer I just up dated to windows 10. The computer doesnot see the webcam I'm looking for a driver or help getting the webcam works, I also down loaded youcam. When I go into the Device

  • Peripheral J6400 all-in-one

    Message says windows can not connect to the printer.  Local print spooler service is not running. Restart the spooler or restart the machine.  What is a spoler?

  • I can't open the zipper. files more

    I recently downloaded a file that is entered into a zip file. format and should be with a picture. Usually, when I download something of this type of file, I am able to click on the file and select "extract files", but with a few files I downloaded r