BAD_SYSTEM_CONFIG_INFO

Similar Questions

• Windows XP Home fresh install "bad_system_config_Info" error

  Hello

  I'm trying to install a new copy of Windows XP Edition family on PC to a family member and I get a BSoD "bad_system_config_Info" error message and STOP code 0x00000074.after Setup support files.

  Background:
  -New SATA HD (tested on my PC after a few BSoD of internal CONNECTIONS and with a box external w/USB connection. - it works fine).
   
  -RAM is good. I tried 3 branches far and I get the same error (another suggested thread it was a problem of RAM)

  -The BIOS is being updated and functional, I went through the settings offered on another thread.

  -There are no files on the hard drive. I tried to format, create partitions, deleting partitions. Nothing has worked.

  -The CD is fine. I ran a set up on top of another system and installed fine. (Yes, I spent a few hours ensuring that my installation disc was good = P)

  I am at a loss to know what to do now. I have not run across a solution to solve this with a fresh install, right on systems 'installed' (i.e. the last config known, Point of system restore, etc...)

  Any ideas?

  Looks like the problem is indeed RAM.

  You have more than one stick of RAM? If RAM use as well as a stick and install XP.

  Error message "STOP 0 x 00000074 BAD_SYSTEM_CONFIG_INFO" when you start your computer
  http://support.Microsoft.com/kb/326679

  I have no other suggestions, unfortunately :|

• BSOD bad_system_config_info

  During the process of overclocking my CPU, I downloaded CPU - Z. Oddly enough, CPU - Z says that my processor (i7 - 2600 k Sandy Bridge) uses only 2 cores and 4 sons. A quick search on google suggested that I go to msconfig-boot-> advanced >-> uncheck the processor. Initially, the box has been ticked, and the number of processors the value 4. When trying to restart, the screen is stuck on the screen logo windows for a few minutes, then gives me a BSOD bad_system_config_info. The same phenomenon occurs when you try to start in SafeMode as well.

  Some additional research tell me what I need to manually change the registry by starting windows or another HARD drive or windows installation disc, that aren't available to me. What should I do?

  EDIT: I tried also to start with the last known good configuration and after doing a system restore. Neither have worked, and both give me the same problem.

  Hello

  For your reference with bad_system_config_info, I suggest that you check the response of the community through reply SpiritX MS MVP . Let us know how it goes.

  Kind regards

• NetBook will not start

  Hi, so I got a virus on my netbook a few days ago. I was going to get rid of it, but I'm lazy and waited and tried to start it until today. I got a blue screen, and I think that the error was bad_system_config_info. It is difficult to say because it disappears so quickly and restarts. I guess that the virus has damaged an important file, but I don't have an external DVD drive, or a Windows xp disc.

  I tried for hours to fix my flash player. None of the guides I did worked. I don't know what to do. Can anyone help?

  Also, I have windows xp.

  Hey Buddy,

  What netbook you have exactly?

• L50-B-1FU satellite do not start

  When I try to turn on the laptop, it remains to be the "TOSHIBA Leading Innovation" screen for a few minutes then it gives me the possibility of "scanning and repair the drive" everything I take it gives me an error code of 0xc0000185 or says "BAD_SYSTEM_CONFIG_INFO".
  I and running Windows 10.

  He has now given me an error of "CRITICAL_PROCESS_DIED".

• The ERROR stop: 0 X 00000074 0 x 00000003 OX00000002 0 X 80087000 0XC000014C

  XP stopped booting from any mode.  has ran the cd done chkdsk /r 1 problem found recovery console.  still no reboot from the hard drive, off F8 to restart the system in case of failure now get bad-system-config-info and error as the title.  All ideas now?  Not loaded a new hardware or software.

  Hi JoyRibbans,

  This problem may occur if one or more of the memory (RAM) modules that are installed in your computer is damaged or if the RAM configuration is incompatible.

  Refer to the article below and try the steps mentioned, check if it helps.

  Error message "STOP 0 x 00000074 BAD_SYSTEM_CONFIG_INFO" when you start your computer

  http://support.Microsoft.com/kb/326679

• Displaying the right information to get a BSOD error help

  When your computer crashes and displays a blue screen there are often very valuable information about the photo that will allow users to help you solve your problem and to know what is causing this blue screen appears.

  Looking at the image at the end of the article you will see two sections highlighted, you will always want to post this information in your forum thread when looking for help she will be the most critical part of troubleshooting. The top tells us what's happening and said background where it goes to. We have just responded to two of the most important issues when you try to solve a problem.

  What's not?

  Where is the problem isolated to?

  Most of the text is quite annoying, but if that's important to you then it may be important for us. We have all seen what looks like a BSOD, but we do not know what your BSOD.

  There are more important questions that you can answer that will help your troubleshoot BSOD error message.

  1. What is your system brand and model? We know that you have an HP computer, but there are tons of computers. We need to know your specific model to ensure you use the appropriate drivers and we recommend the proper drivers.
  2. What is your version of Windows and the Service pack?
  3. Are you running a 64 bit or 32 bit OS?
  4. What is your Internet browser and version?
  5. Does your system use IDE or SATA disk drives?
  6. What virus protection software and current malicious software do you use? Is up to date?
  7. The issue occurred after an interruption of the power supply as an abnormal termination or power failure?
  8. What has changed recently?
  9. Does this happen often you can effectively reproduce the problem? If you can easily reproduce what steps can you take to reproduce the problem.

  Here is a list of the most common mistakes of the BSOD you can see

  • Stop 0 x 00000003 UNSYNCHRONIZED_ACCESS
  • Stop 0x0000000A IRQL_NOT_LESS_OR_EQUAL
  • Stop 0x0000001E KMODE_EXCEPTION_NOT_HANDLED
  • Stop 0 x 00000023 FAT_FILE_SYSTEM
  • Stop 0 x 00000024 NTFS_FILE_SYSTEM
  • Stop 0x0000002E DATA_BUS_ERROR
  • Stop 0x0000003F NO_MORE_SYSTEM_PTES
  • Stop 0 x 00000044 MULTIPLE_IRP_COMPLETE_REQUESTS
  • Stop 0 x 00000050 PAGE_FAULT_IN_NONPAGED_AREA
  • Stop 0x0000006B PROCESS1_INITIALIZATION_FAILED
  • Stop 0 x 00000073 CONFIG_LIST_FAILED
  • Stop 0 x 00000074 BAD_SYSTEM_CONFIG_INFO
  • Stop 0 x 00000076 PROCESS_HAS_LOCKED_PAGES
  • Stop 0 x 00000077 KERNEL_STACK_INPAGE_ERROR
  • Stop 0 × 00000079 MISMATCHED_HAL
  • Stop 0x0000007A KERNEL_DATA_INPAGE_ERROR
  • STOP 0x0000007B INACCESSIBLE_BOOT_DEVICE
  • Stop 0x0000007E SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
  • Stop 0x0000007F UNEXPECTED_KERNEL_MODE_TRAP
  • Stop 0x0000008E KERNEL_MODE_EXCEPTION_NOT_HANDLED
  • Stop 0x0000009C MACHINE_CHECK_EXCEPTION
  • STOP 0x0000009F DRIVER_POWER_STATE_FAILURE
  • Stop 0x000000BE ATTEMPTED_WRITE_TO_READONLY_MEMORY
  • Stop 0x000000C2 BAD_POOL_CALLER
  • Stop DRIVER_VERIFIER_DETECTED_VIOLATION 0x000000C4
  • Stop 0x000000CA PNP_DETECTED_FATAL_ERROR
  • Stop 0x000000CB DRIVER_LEFT_LOCKED_PAGES_IN_PROCESS
  • Stop 0x000000CE DRIVER_UNLOADED_WITHOUT_CANCELLING_PENDING_OPERATIONS
  • STOP 0x000000D1 DRIVER_IRQL_NOT_LESS_OR_EQUAL
  • Stop 0x000000D5 DRIVER_PAGE_FAULT_IN_FREED_SPECIAL_POOL
  • Stop 0x000000D8 DRIVER_USED_EXCESSIVE_PTES
  • Stop 0x000000DA SYSTEM_PTE_MISUSE
  • STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER
  • Stop 0x000000ED UNMOUNTABLE_BOOT_VOLUME
  • Stop 0x000000F2 HARDWARE_INTERRUPT_STORM
  • Stop 0x000000F4 CRITICAL_OBJECT_TERMINATION
  • Stop 0x000000FC ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY
  • STOP 0x000000FE BUGCODE_USB_DRIVER
  • Stop 0xC0000218 UNKNOWN_HARD_ERROR
  • STOP 0xC000021A STATUS_SYSTEM_PROCESS_TERMINATED
  • Stop 0xC0000221 STATUS_IMAGE_CHECKSUM_MISMATCH
  • STOP 0xC0000244 STATUS_AUDIT_FAILED

  

  This thread is purely an informative thread. If you are experiencing a BSOD error please create a new thread ensure you provide information that questions on this thread.

  While many BSOD errors may be troubleshooting-made the same way, there is an amount of many of them and they should be troubleshoot-carried out on their own.

  If you have anything else you want to add or general BSOD issues then you can post them here, but if you ask about anything that requires real troubleshooting it should be in its own thread.

• Misconfiguration of the info system

  Have currently Windows 7, I came to work this morning and my computer showed that he had downloaded Windows 10 and asked to accept or refuse. I DECLINED, then said he would restore my previous version. Now it shows BAD_SYSTEM_CONFIG_INFO. I tried to choose a system restore but it says that there is not one. UGGGGGG I'm not computer savy. Is it possible to fix this...

  No, unless you have a system image to restore before the upgrade I know :(

  https://support.Microsoft.com/en-us/KB/3095675

• My OS is available from downloads?

  I don't remember if the disks came with my two Inspiron N5010s when I bought them or not. If they did, I can't find them anywhere. Does anyone know if I can download the OS from Dell and, if so, how I would go all this?

  I'm getting a BSOD - BAD_SYSTEM_CONFIG_INFO on one of the laptops. I can't really find much information online about this error message. One thing I found says it's bad memory and, if this is the case, maybe I will not need to reinstall, but, frankly, I wouldn't mind not to give this thing a new start. It has always been the poor cousin of the two laptops, which is kind of funny (not) because I bought them both at the same time and we were clearly less perky since birth.

  Thanks to anyone who can help me here.

  Depending on the country you are, you will need to ask them to dell support.

• Install w7 FEATURES and I get an error of missing driver

  I do a Windows 7 Pro install. processor 8. I7 cpu. 16 GB of Ram. It is a system that I'm trying to restore, because some drivers for my graphics card has gone South.  Now I get a missing driver error every time I try to reinstall W7.
  I'm not very computer... so go easy on me. ( :
  Thank you
  Denny

  Maybe it's not the exact error, but it is close. The screen goes blue and shows what...

  a problem has been detected and windows has been shut down doe to avoid damage. BAD_SYSTEM_CONFIG_INFO
  Ensure that all new material of the software has been installed correctly... apply updates

  STOP: 0 X 00000074 (0XFFFFF88003941B20, 0 X 000000000000002, 0 X 000000000000002, 0XFFFFFFFFFFC0000009A)

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

• Win 7 (x 64) no family Premium BSOD 0xF4 no Dump

  I recently built a customized desktop.  Here is the card with links from Newegg in case more is needed:

  Software - Windows 7 Home Premium (64-bit)
  Case - Thermaltake Level 10 GT

  CPU - Intel Quad-Core i7-3770 K Ivy Bridge (3.5 GHz)

  Graphics card - EVGA GeForce GTX 670 2 GB

  Motherboard - Intel Z77 DZ77BH-55 K

  Memory - Patriot G2 16 GB (2 x 8 GB) DDR3 1600

  Solid State Drive - 128 GB SATA III Crucial M4

  Hard drive - Seagate Barracuda 1 TB 7200 RPM / MIN SATA 6.0 GB/s

  Wireless adapter - adapter to N TP-Link TL-WN951N wireless

  Power - Cooler Master Silent Pro hybrid 850W
  Disc 1 - LITE-ON Blu-ray
  Disc 2 - DVD/CD Sony
  This is the first computer I built, so I was very happy when everything worked the first time.  The only changes from the BIOS, I did were the profile of time and memory (the new profile has been provided by the manufacturer - no custom changes have been made in the case).  I installed windows and then formatted the drive twice because I decided that I wanted to do something different.  On the third installation, I used a NTFS junction to move the Users folder on the second disc.
  C:\ (SSD - system)
  D:\ (1 TB HDD)
  It seems to work pretty well until I've had the occasional BSOD.  He always says "a process or thread crucial to system operation has unexpectedly released or ended."  Error code was 0x000000F4.  The first parameter is 0 x 3, so it is a process.  I changed the memory profile to default in BIOS, but the BSOD kept returning.
  I had trouble getting Windows updated after that, and after a few fruitless troubleshooting, decided to reinstall everything Windows once more.  Now I'm on my fourth install (user is back on the SSD for now) and I still get the BSOD with the same mistakes.  The BSOD doesn't dump any report or restart the computer, either, so I have no additional information to work off of.  It happened during update, download, market at idle and start, leading me to believe that it's a hardware problem.
  All the drivers are up to date (except maybe the wireless card since the site of TP-LINK is down).
  All Windows updates have been installed.
  SFC indicated no error.
  MemTest86 + not reported no error (single-pass).
  ChkDsk (read-only) reported no error.
  However, ChkDsk on restart gives me a BSOD before she can finish.  This one says "BAD_SYSTEM_CONFIG_INFO" with the error code 0 x 00000074.  This leaves me wondering if there is a problem with the RAM.  Is it possible that MemTest86 + does not report an error and the memory still be defective?
  Some resources also suggested that the 0xF4 error could be because of a bad SATA connection between the motherboard and the SSD (in this case).  The SATA cable is not hold on very tight ports hot in my case, but it seems to stay very well.  This could also be the problem
  ?
  Other resources also suggested that 0xF4 error could be caused by a timeout during the awakening of the computer from sleep mode.  I did, however, without a BSOD.  I think that the problem must be with the processor, RAM or SSD.  I think of RMAing the memory, but I want to assure you that it is RAM before I head to the College.
  Thanks in advance for any help!

  I have not deleted IE in one installation, but I used Google Chrome when able.

  I just installed Windows 7 Ultimate cool (with a touch of quick access for now).  I installed the mobo drivers, graphic drivers, then the driver wifi - all this without a network connection.  I did not connect to any network after installing the wifi driver, but it crashed shortly after anyway.
  Don't know what to do with it.  Nevertheless, I do a recovery of the system right now to remove the wifi driver.
  EDIT: It has crashed already after that.  Now I get to before the graphics drivers.

• Windows 8 facing c0000185 error code

  Hi all

  I have lenovo z580, im a problem during the startup of windows 8.

  The boot stops at the Blue error screen saying bad_system_config_info and error code is 0xC0000185.

  Main problem is that I don't have my os as capable boot disk or usb to... I don't know the key to product also... I wanted to recover as

  Could someone help me on this please.

  To respond to your request, if the operating system is installed on the computer, your computer manufacturer may be able to provide the drive according to their policy.

  Kind regards.

• Error: "the drive where windows is installed is locked, unlock the drive and try again" while trying to regenerate the system

  My daughters Toshiba S955-S5373 went all green, she says while she helped the battery out. I didn't know she was in trouble. We tried to solve; However, Bad_system_config_info appears before diagnosing and resolving problems. After 4 hours, nothing has been resolved.

  I found the DVD we created initially and attempted to load that. We shut down the laptop with the power and reverse holding F12 button. I tried to boot from the DVD, but it does not read the DVD and just crossed the initially to start and diagnose and solve problems. I have waited 2 hours, but without success.

  I turned off again and I just tried to refresh the PC. He said "the drive where windows is installed is locked, unlock the drive and try again".

  I then tried auto repair but could repair. Log file C:\Windows\System32\Logfiles\Srt\SrtTrao;/txt appeared.

  I even tried to reset the PC as a last resort. But the message failed to reset the PC required A disk partition is missing.

  Don't know what I can do. Can you help us?

  Original title: Toshiba S955-S5373 will not start

  Hi Annaed,

  Thanks for posting your query in Microsoft Community.

  I can understand your concerns to your system and will certainly guide you in the right direction to solve the problem.

  Control bug BAD_SYSTEM_CONFIG_INFO occurs if the SYSTEM registry hive is damaged. However, this corruption is generally unlikely, because the bootloader, known as NT Loader (NTLDR) in versions of Windows prior to Vista, checks a hive for corruption when loading the hive.

  This bug check can also occur if some values and critical registry keys are missing. You keys and values may be absent, if a user manually change the registry.

  As per the error message "the drive where windows is installed is locked, unlock the drive and try again", I would refer to the suggestions posted by phanlon7 replied on 12 October 2013 in the next thread and check if they are useful.

  Windows crash hard drive - discount - locked, unlock the hard drive

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• We get a '0 x 00000074' error while trying to start the computer.

  * Original title: Windows 8 will not start

  I have a dual boot of Windows 8 and Arch Linux - installation.

  Windows suddenly stopped working (after he installed an update and automatically rebooted itself), and currently breaks immediately after the start of set sequences under construction, which gives the following message:
  Your PC needs to restart.
  Please press and hold the power button.
  Error code: 0 x 00000074
  0x00000001
  0x00000002
  0x81668F00
  0x811B39E0
  I tried to do a system restore, but it fails with the following message is displayed:
  System Restore has failed. The system files and settings on your computer did not change.
  Details:
  System restore failed when deleting the following file:
  Path: D:\$MFT\
  An unspecified error occurred during system restore. (0x8007007b)

  Hello

  Bug BAD_SYSTEM_CONFIG_INFO control has a value of 0 x 00000074. This bug check indicates that there is an error in the registry.

  If you use Windows 8 or 8.1 of Windows, I suggest you follow these steps and see if that fixes the problem:

  has) start the computer using Windows 8/8.1 DVD, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.
  type b) select keyboard and the correct time .
  c) click on repair your computer in the lower left corner.
  ( d) select Troubleshooting to choose an option screen.
  form e) click Advanced options in the resolution of the problems .

  f) click on command prompt.

  ( g) the following commands and press ENTER after each command line:

  Bootrec /fixmbr

  Bootrec /fixboot

  Bootrec /scanos

  Bootrec /rebuildbcd

  Restart the computer and check the issue.

  Keep us informed on the status of the issue. We will be happy to help you.