Bad Update number of records

Similar Questions

• Can I get the total number of records that meet the conditions of a query using the Table API?

  Hello

  A < row > TableIterator is returned when I ask operations using the index of tables. If I want to get the total number of records, I count one by one using the returned TableIterator < row >.

  
  

  Can I get the total number of records directly meets the conditions of the query?

  I can get the total number of records directly the request of the meeting of the conditions of CLI using the command Global table - name tableName - count - index index-name-field fieldName - start startValue-end endValue.

  Can I get the same results using the Table API?

  I used MongoDB and NoSQL Oracle for about a year. According to the experience of the use of these dbs, I think mongoDB querying interface is powerful. In the contras, the query interface is relatively simple, which results is a lot of work that is usually a long time in the client side.

  Hello

  Counting records in a database is a tricky thing.  Any system that gives you an accurate count of the records will have a hotspot of concurrency on updates, namely the place where the counting is maintained.  Such a count is a problem of performance in addition to competitive access problem.   The problem is even more difficult in a system widely distributed such a NoSQL database.

  The CLI has overall command that counts, but does so by brutal force - iterate keys that correspond to the parameters of the operation.  This is how you must do this within the API.  There is not a lot of code, but you have to write.  You certainly want to use TableIterator TableAPI.tableKeysIterator (), because a key iteration is significantly faster than the iteration of lines.  Just one iteration and count.

  If you use TableAPI.multiGet () and a key with a touch of brightness full then, in fact, count the results as they are returned in a single piece (a list).

  Kind regards

  George

• You need to update a Table on a regular basis. Incremental update on only records updated in the Source table

  Dear all,

  I have a requirement to extract the full details of human resources and payroll related applications Oracle HRMS tables.

  You will need to create a table with these values for a specific nationality.

  Post Table design, I have to periodically update this table, in that based on changes made to the Tables of basic Oracle.

  Ex: A Table like Structure:

  PERSON_ID	NUMBER
  EMPLOYEE_TYPE	VARCHAR2(80)
  BUSINESS_GROUP_ID	NUMBER
  BUSINESS_GROUP_NAME	VARCHAR2 (240)
  STAFFNR	VARCHAR2 (30)
  STAFF_NAME_EN	VARCHAR2 (240)
  STAFF_NAME_AR	VARCHAR2 (240)
  SHORT_NAME	VARCHAR2 (150)
  FIRST NAME	VARCHAR2 (150)
  LAST_NAME	VARCHAR2 (150)
  MIDDLE_INITIALS	VARCHAR2(60)
  ASSIGNMENT_ID	NUMBER
  TITLE	VARCHAR2 (30)
  CATEGORY	VARCHAR2 (30)
  MARITAL_STATUS	VARCHAR2 (30)
  Date of birth	DATE
  DOJ_COMPANY	DATE

  This detail table is extracted from Oracle HRMS tabels like Per_all_people_F and Per_all_assignments_F etc. Not whenever a record is updated to say the employee's first name, I'll have to update this particular record for the employee. I am well aware of Materialized view feature. But I needed a faster solution, in PLSQL.

  I'm on a tight schedule. So any help is appreciated.

  Best regards
  Antony Jayaraj J

  Looks like you want to Merge.  There's even an associate HR example!

• difference in number of records

  Hi all
  
  I'm trying to get a number of records in this table and I get 2 different output, select count (*) shows 68560 and after update stats NUM_ROWS watch 68323, can someone help me figureout why the difference.
  
  SQL > select count (*) in the dcepcd;
  
  COUNT (*)
  ----------
  68560
  
  SQL > select num_rows in dba_tables where table_name = 'DCEPCD ';
  
  NUM_ROWS
  ----------
  68323
  
  Thank you / JJ

  864653 wrote:
  Hi all

  I'm trying to get a number of records in this table and I get 2 different output, select count (*) shows 68560 and after update stats NUM_ROWS watch 68323, can someone help me figureout why the difference.

  SQL > select count (*) in the dcepcd;

  COUNT (*)
  ----------
  68560

  SQL > select num_rows dba_tables where table_name = 'DCEPCD ';

  NUM_ROWS
  ----------
  68323

  Thank you / JJ

  When you gather stats, Oracle is probably just sampling the data. This means that Oracle would be approximately the number of lines, not give you the actual number of lines. Please read the documentation on DBMS_STATS:
  http://docs.Oracle.com/CD/E11882_01/AppDev.112/e25788/d_stats.htm

  Here is a relevant excerpt:
  Table 141-39 GATHER_DATABASE_STATS procedure parameters
  estimate_percent
  Percentage of rows estimate (NULL means calculates): the valid range is [0.000001,100]. Use the constant DBMS_STATS. AUTO_SAMPLE_SIZE to Oracle to determine the size of the sample appropriate for good statistics. It is the default value. The default value can be changed using the SET_DATABASE_PREFS procedure SET_GLOBAL_PREFS procedure, procedure SET_SCHEMA_PREFS and SET_TABLE_PREFS procedure.

  Summary: You should get the actual number of lines if gather you stats with estimate_percent => NULL. Be aware that Oracle does not by default for performance reasons.

• number of records per page total records compared to the BI Publisher

  Hello
  
  In the tool Oracle BI Publisher, please can you me how to display the total number of records in a report? as well as how to display the number of records per page?
  
  Thanks for your help
  
  Concerning
  Garza

  check the Inbox. passed the updated model

• count the number of records

  I have a control block View1 with some fields, YEAR, MONTH, STAFF and button SEARCH with the trigger button when pressed with the pl/sql code 'go_block (view2); execute_query; »
  View2 is the block of data showing 10 records on canvas with the fields NAME, STAFF, WAGES...
  in the palette view2, property
  Insert allowed the value or not, update enabled is set to no and in which I put a code of clause.
  After pressing the View1 SEARCH get all the required documents output.
  I want to count the number of records of my outings.
  How do I do that... ???
  
  
  thnx. (I use 10g)

  ManiKanchan wrote:
  I have a control block View1 with some fields, YEAR, MONTH, STAFF and button SEARCH with the trigger button when pressed with the pl/sql code 'go_block (view2); execute_query; »
  View2 is the block of data showing 10 records on canvas with the fields NAME, STAFF, WAGES...
  in the palette view2, property
  Insert allowed the value or not, update enabled is set to no and in which I put a code of clause.
  After pressing the View1 SEARCH get all the required documents output.
  I want to count the number of records of my outings.
  How do I do that... ???

  thnx. (I use 10g)

  You can use a column with data type number and not the database.
  Set

  calculation mode :summary
  summary function:count
  summarized block:your_block_name
  summarized item:name_column
  

  Hope this helps...

• Number of records rollBacked

  Hello
  
  We killed a session that has been updated 10cr records. And unfortunately, we need to kill the sessions. And we did the same thing.
  
  Now I need to know the number of records is rollbacked & how to restore, how much time it will take to complete.
  
  So could you please help on this.
  
  Kind regards
  Nasresh

  For you, I did something as below and the script above Sir Steve Adams works well at my 11.2.0.1 windows xp box (just I removed the '_' that is line of underscore of)
  ...
  ...
  sys.x_$ ktuxe x,.
  sys. V_$ transaction t,.
  sys. V_$ s session
  ...
  ...
  Of
  sys.x_$ ktuxe
  ...
  ...
  These lines and I got the results. See below:

  Session 1: (Scott Session)
  create test table select the level of the double connect by level<=>
  Update test set l = 0;
  Rollback;

  Session 2:(SYS's Session)

  SQL> declare
    2    cursor tx is
    3      select
    4        s.username,
    5        t.xidusn,
    6        t.xidslot,
    7        t.xidsqn,
    8        x.ktuxesiz
    9      from
   10        sys.x$ktuxe  x,
   11        sys.v$transaction  t,
   12        sys.v$session  s
   13      where
   14        x.inst_id = userenv('Instance') and
   15        x.ktuxesta = 'ACTIVE' and
   16        x.ktuxesiz > 1 and
   17        t.xidusn = x.ktuxeusn and
   18        t.xidslot = x.ktuxeslt and
   19        t.xidsqn = x.ktuxesqn and
   20        s.saddr = t.ses_addr;
   21    user_name  varchar2(30);
   22    xid_usn    number;
   23    xid_slot   number;
   24    xid_sqn    number;
   25    used_ublk1 number;
   26    used_ublk2 number;
   27  begin
   28    open tx;
   29    loop
   30      fetch tx into user_name, xid_usn, xid_slot, xid_sqn, used_ublk1;
   31      exit when tx%notfound;
   32      if tx%rowcount = 1
   33      then
   34        sys.dbms_lock.sleep(10);
   35      end if;
   36      select
   37        sum(ktuxesiz)
   38      into
   39        used_ublk2
   40      from
   41        sys.x$ktuxe
   42      where
   43        inst_id = userenv('Instance') and
   44        ktuxeusn = xid_usn and
   45        ktuxeslt = xid_slot and
   46        ktuxesqn = xid_sqn and
   47        ktuxesta = 'ACTIVE';
   48      if used_ublk2 < used_ublk1
   49      then
   50        sys.dbms_output.put_line(
   51          user_name ||
   52          '''s transaction ' ||
   53          xid_usn  || '.' ||
   54          xid_slot || '.' ||
   55          xid_sqn  ||
   56          ' will finish rolling back at approximately ' ||
   57          to_char(
   58            sysdate + used_ublk2 / (used_ublk1 - used_ublk2) / 6 / 60 / 24,
   59            'HH24:MI:SS DD-MON-YYYY'
   60          )
   61        );
   62      end if;
   63    end loop;
   64    if user_name is null
   65    then
   66      sys.dbms_output.put_line('No transactions appear to be rolling back.');
   67    end if;
   68  end;
   69  /
  No transactions appear to be rolling back.
  SQL> /
  No transactions appear to be rolling back.
  SQL> /
  SCOTT's transaction 3.1.1315 will finish rolling back at approximately 14:43:12
  01-MAY-2011
  SQL> /
  SCOTT's transaction 3.1.1315 will finish rolling back at approximately 14:43:31
  01-MAY-2011
  SQL> /
  SCOTT's transaction 3.1.1315 will finish rolling back at approximately 14:43:27
  01-MAY-2011
  SQL> /
  SQL> /
  No transactions appear to be rolling back.
  SQL>
  

  Concerning
  Girish Sharma

• Can Notes show the number of records with each folder?

  Can Notes show the number of records with each folder?

  No it can't. It would be nice tho.

• Copy from HDD to disc results external hard of different sizes but the same number of records

  Backup hard drive to external drive, 800 GB in total. When finished copying the file on the external drive size is smaller than 40 GB, but there is the same number of records.

  Different disks often present of thisdue fragmentation on each disk and the differences in the block sizes used on each disc. As long as all your data are present then there is no need to worry.

• Electric trigger DAMA IQ &amp; check for new records to collect an infinite number of records

  Hi all

  I have some difficulties with the help of the trigger edge power IQ & questioning the DAMA if it has samples/records ready for pick up.  I have reviewed the documentation on the support to the screw and the examples provided with the driver of the ACCA and have not been able to solve my problem on my own.    What I'm trying to do, is to have this VI capture periodic RF bursts that are larger than a specified threshold.

  I go to this topic in the following way:

  I put the number of samples I captured (finished) for each burst which crosses the threshold
  I put the number of records to capture to be infinite
  I said that the rising slope and the appropriate threshold
  I have then to validate the configuration of the ACCA and start acquiring
  I have then go into a loop and check the backlog of samples as well as the acquisition is
  If either of the above is true then I get the samples with the IQ extract complex WDT vi
  I continue looping until the user stops the vi with a button on the front panel
  I went on this path that I didn't block indefinitely or for long periods of time

  What I see is:

  I'll take one shot and then nothing else
  what the samples never back above zero
  that acquisition is ever complete
  If I switch out the IQ extraction with equivalent IQ reading and ignore the completion back & I get documents like I expect

  My understanding is as follows:

  Electric trigger IQ does not have to be re-armed in VI
  that each trigger to fire IQ Power will create a new record containing the number of samples that I asked

  My questions:

  It seems that when the number of records is infinite that the acquisition is never considered as carried out when the State of the acquisition is verified, is that correct?
  I receive multiple records pending upward on the ASB using this configuration?
  Why a record number is provided with the back of fetch get VI?
  Why would I pick any folder, but the record of zero?
  I'm doing something wrong here?
  Is there a better way to do this?
      
  Thank you
  Russell

  Hi Russell,

  You are on the right track to get your application do what you want. Instead of check to fetch back, I suggest that lets you read the property node DAMA the "' Acquisition > Fetch > Records made" property to know when a new record was acquired. "

  > it seems that when the number of records is infinite that the acquisition is never considered as carried out when the State of the acquisition is verified, is that correct?

  That is right.

  > I get multiple records pending upward on the ASB using this configuration?

  Yes

  > Why a record number is equipped with the rear of fetch get VI?
  > Why would I pick any folder, but the record of zero?

  You ask DAA for an infinite number of records. File 0 started the first trigger seen. Record 1 to the second outbreak (end of disk 0) and so on.

• Is it OK to delete the update number 2 after the new update has been entered IE number 6 of the same program?

  to delete the update number 2 after the new update has been entered IE number 6 of the same program

  original title: he is allowed to delete the previous updates of files

  Hi Carl,

  I suggest you go through this article to Java which can be useful.

  Why should I remove old versions of Java in my system?

  Removal of previous versions of the .net Framework is based on the applications that are running on the computer.

  For applications, if you have an application based on any .NET Framework on the computer, you cannot delete it since you have need to support the application runs correctly.

  .NET framework 3.5 SP1 includes .NET Framework 2.0 SP2 and 3.0 SP2. This means that .NET Framework 2.0 and 3.0 can not be deleted because they are the sine qua non of .NET Framework 3.5 SP1. If you have any application based on .NET Framework 3.5 SP1, please do not remove .NET 2.0 SP2, 3.0 SP2 and 3.5 SP1.

  I would also not to uninstall the security updates that are important for the security of your computer.

• Unable to get the total number of records processed by the processor of trade rules

  Details of the environment

  ======================

  Disqualification Version: 12.1.3.0.0

  
  

  I use a business rules processor to implement multiple business rules on one record and I am looking for a summary of the number of records increased and does not have a specific rule.

  
  To illustrate:
  Suppose there are 2 rules, invalid number in Column1 and valid number on Column2.
  10 records to process and 3 folders don't rule 1 (valid on column1) and 9 entered failure of rule 2 (valid number on Column2).

  In the browser of result of the processor Business, the number of past records and failed is displayed but is not part of the output of the processor itself. In the example above, there will be 1 pass and 9 fail records and given the values of said the total number of records can be derived which is 10.

  This is why the expected output will be:
  Success of failure
  Rule 1:7 (10-3) 3
  Rule 2: 1 (10-1) 9
  Note: The number of records that failed can be derived from the table of the rule ID but I don't know how to get the total number of records in order to calculate the number of records that a given rule.

  I tried to publish the County of acceptance and rejection in the browser of result of the processor Business in an intermediate table and ask the same intermediate table to get the pass and fail values but Disqualification does not allow to write and read the same intermediary object in a single process. What is the best way to get the number of records total handled by the processor business rules? This kind of attributes (that do not exist only in the browser of result) can be included in the output of the processor in the next version of the Disqualification?

  In addition, the intermediate table contains only 1 sheet with pass and failure values while the exceptions which have individual failure on each rule contains 12 Archives. What would be the best approach to merge a single record into multiple records according to the example below?

  Staging table
  Success of failure
  1 9

  Exception table
  Single ID ID rule
  Rule 1 Record1
  Rule 1 Record2
  Rule 1 record Record3
  Rule 2 Record1

  Exception table with: staging Table data merge
  Rule ID ID Unique Pass Fail Total
  Rule 1 1 9 10 Record1
  Rule 1 1 9 10 Record2
  Recording rule 1 Record3 1 9 10
  Record1 rule 2 1 9 10
  
  Please notify.

  Hi Jason,

  The best way to explain how to do this is with an example project (DXI). I'll send you one in offline mode.

  -Mike

• Does Oracle 10g - Record Count/Total number of records.

  Hello, I'm looking to display the current records of number / total Records at the bottom left of a custom form. Please see below, made me know how this is done. Enjoy it!

  

  Thanks, Naveen.

  Your question is unclear.  Forms already did what you mentioned and appears as such in the image you downloaded.  If you don't see it in a particular form, open the form in the report generator and check at the level of the 'form', property 'The Console window' is not NULL and properly reflects the name of the appropriate window.  A NULL value prevents the message bar appears.

• How to determine the number of records in a subquery

  I am fairly new to Oracle SQL, and would like to know if anyone has examples of how to perform the following operations:

  1. I would return the number of rows that exist in the following SQL statement below. This SQL will be part of a larger SQL statement and I will be passing in the EMPLID identifier in the subquery. The result must be a value showing the total number of records that correspond to the SQL below. "xyz" will be finally passing through the extension number of the employee by using a reference to the parent SQL... ie: jbe. POSITION_NBR
  2. My SQL:

  SELECT Cjbe. EMPLID OF PS_JOB cjbe
  WHERE cjbe. POSITION_NBR = "xyz".
  GROUP BY cjbe. EMPLID

  I would like to know how I can change the value of poarent to POSITION_NBR (I think I use jbe.) POSITION_NBR) total calls the EMPLID found in this subquery subquery and then return.

  Thanks for your help.

  Maybe I lack something, but isn't this just

  SELECT count (distinct empl_id) from ps_job where position_nbr =: some_position_nbr

• How can I recover only odd or even number of records in the table?

  Hello

  How can I recover only odd or even number of records in the table?

  Thank you
  

  Hi IndiMinds,

  Alternatively, you can use in queries. :

  Odd:

  SELECT *.

  Of

  (SELECT rownum row_count, id, name FROM bigemp

  )

  WHERE mod (row_count, 2) = 1;

  Still:

  SELECT *.

  Of

  (SELECT rownum row_count, id, name FROM bigemp

  )

  WHERE mod (row_count, 2) = 0;

  Thank you