Peripheral USB are not recognized on my Satellite A350

Similar Questions

• Peripheral USB are not recognized

  Original title: USB drivers

  My mouse, printer and mobile device are not recognized or functioning when plugged into the USB ports. They seem to be fed, but that's all. When I run MASTS (Microsoft Automated Troubleshooting Service), it scans and concludes that "material changes may not have been detected. He said he applied a fix but still nothing works.

  Try to reinstall the chipset drivers of your PC manufacturer or the manufacturer of the motherboard, if a generic PC

• Satellite 5005-S504 - peripheral USB are not recognized

  Hello

  with my laptop older, one Satellite 5005-S504, I recently problems with the USB ports. None of the three ports detects a USB device. Device Manager does not indicate a problem on the host controller or root hub.

  I am running Windows XP, SP3 and there was no recent updates to be identified as the cause of this dysfunction.

  Suspicion over there?
  Is there a driver available that could help?

  Thanks in advance!

  TH

  Hello

  The USB ports are listed in the Device Manager or not?
  If so, I'll try to remove them and restart the laptop. After that the ports will automatically install again.

  If it doesn't work, you can try updating the chipset driver. Take a look on the Web from Toshiba site to download.

• Peripheral USB is not recognized (external hard drive)

  I have a western digital external drive who worked originally on windows XP Edition family, unfortunately this computer crashed and had to reinstall everything. After ending, I went to retrieve some data off the drive and it keeps giving error usb device not recognized. I looked on a lot of different 'solutions' to nothing does not. I can connect to other computers running the same operating system and he shoots very well if it is not the drive. It seems as if a driver is missing, but I checked with Western Digital, and they say the questions is a mistake of operating system, all updates and service packs have been installed. Ive tried all online of the easy solution like just unplug the computer and the drive and restart, remove and reinstall the drivers in the OS System. In Device Manager its reports as an unknown device under the USB bus controllers section. I need to get this to work by car no matter either if it needs to be reformatted or repartitioned, but I can't even pull up on the drive to reformat so don't know what to do. any suggestions are greatly appreciated.

  The problems detected as "unknown".

  http://support.Microsoft.com/kb/314464

  WD Firmware Updater. (May be necessary since you have reinstalled the OS)

  http://www.wdc.com/wdproducts/wdsmartwareupdate/?ID=wdfMyPassport&OS=win&FW=1

• Re: USB does not work on the Satellite A350

  I have a Satellite A350 and USB ports recognized the mouse, but no other entry. It does not recognize a USB drive or Logitech microphone or my Flip video.

  Anyone know what is happening? Thank you!

  USB controller drivers are responsible for these functions. These drivers are part of the chipset drivers. Try to reinstall/upgrade to update chipset utility:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  or

  http://www.MyToshiba.com.au/home

• peripheral USB is not recognized in media player

  the media player does not recognize a flash drive, mp3. It will not be synchronized. Uninstalled and installed the drive and it did not work. don't know what to do next.   al5260

  Which player do you speak? Model name, etc.?

  See you soon,.
  Jerry

• Ports USB Host not recognized ESX4i of devices

  I have a new HP dl 360 G6, I installed the ESX4i update1 custom hypervisor HP with the latest patches of ´s, HW USB ports are activated by the server BIOS and I create a new machine virtual Windows Server 2008 x 32 with allows USB ports, USB ports are shown by windows 2008, but when I plug a peripheral USB is not recognized I need to plug a USB 72 GB DAT, I tried also with a USB and no job. All USB devices are 2.0.

  Yes, you can redirect USB via VMDirectPath, but you will lose VMotion, HA, instant = backup. I had to recoomend a look at USB over IP as Digi AnywhereUSB

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

• Constant pop up of the notice that says "USB device not recognized" after the device has been disconnected

  Trying to connect a Sony W760 to PC Suite and receive the notification as the "peripheral USB is not recognized. Clicked on the indications of alert and monitoring. The device is not installed. Computer restarted, but the alert keeps popping up every 10 to 15 seconds. How to stop?

  Found the answer to the problems by accident. I had turned off my Avast, during the installation of the programs, but did not know that the computer came with Norton already active. Nothing on the screen noted that it is there. The Sony site, under the heading troubleshooting USB and I saw it mentioned to disable McAfee. Became curious and went to control panel > programs and features looking around and found the Norton. Uninstalled, downloaded programs from Sony, install and everything works fine. Just a reminder, check all your security system before installing programs.

• Floppy USB drive not recognized when installing WinXP on Satellite Pro L40

  History:

  I bought a Satellite Pro L40, it came with windows vista. I can't stand vista windows for obvious reasons. so I formatted the HARD drive. I have a copy of windows XP.

  IV ' e read on the internet that I need Intel storage driver manager...

  IA´ve got the driver, he got on a floppy, and it does not, because when I start to install XP, it works (after pressing F6 & choose the driver to install). I come to the part of license agreement, press F8 accept...

  I select the partition I want to use (in format completely on vista). It starts to load more stuff... so he said "PLEASE INSERT LABELD - INTEL MATRIX STORAGE MANAGER DRIVER - DISK IN DRIVE A:" "PRESS ENTER WHEN READY."

  The disc that I used in the first place is always in. when I press on enter, nothing NOT to PAST (the USB floppy drive is not yet into action)

  How can I make it work? It is that I can get.

  I DON'T WANT BACK TO VISTA - HELP!

  This could happen if the floppy USB doesn t drive supports the standards of law. Some people have reported on different websites many floppy drives are not recognized.

  However, worry guy. I have a solution ;) (jeaaa: D)

  Try to create a new XP CD using the software called nLite!
  Then, you could include the SATA (Intel Matrix Storage Manager) driver in this new CD and then you could boot from the XP CD again.

  For details and how to use the nLite please Google because there are a lot of useful Web sites.

  Good bye

• My usb ports are not recognized usb storage damage

  Original title: why is my labtop port shows usb not recognized by vista home basic even though it shows a device installed and ready to use software?

  My usb ports are not recognized usb storage damage

  Hello

  · Do you think any yellow exclamation point inDevice Manager under USB devices?

  Windows vista contains several troubleshooting programs can automatically fix some common problems with your computer. One of them is the hardware and peripheral troubleshooting tool. I suggest you to run the troubleshooter as the first step in troubleshooting.

  Method 1:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 2: Remove and reinstall USB controllers

  a. Click Start; in the start search type devmgmt.msc and press ENTER.

  b. expand Bus USB controllers.

  c. right-click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  d. restart the computer, and then Windows will reinstall the USB controllers.

  e. plug the removable USB storage device and test to make sure that

• Satellite M70: DL - DVD are not recognized on Pioneer DVR-K16S

  My DVD player does not recognize DL media (this device is compatible DL) so I can't burn this type of DVD, that someone can tell me why? all other media CD and DVD works great. I can write and read, but with DL, I can't write because this type of media are not recognized. I tried to find information and driver and firmware on the internet, but I can't find note on DVR-K16s pilot.

  I have a satellite M70

  Best regards.

  Hello

  According to the specifications of the Satellite M70, it should be possible to burn the DL DVD.
  It's not easy to say why you can't burn your DL media.
  You know that not all readers to support all of the CD and DVD.
  A friend of mine tried to use DL media. There were also some problems with another drive.
  I recommend that you test some DL media.

• Satellite L30: Usb device not recognized

  I have a problem with my laptop L30.
  When I connect my phone or a flash drive or external hard drive, it is said: Usb device not recognized one of the usb devices malfunctioned.
  Tried to reinstall windows did not help...

  is there a solution?

  Hello

  Hmm. First of all, you should unplug all external USB devices.
  Then go to Device Manager and remove it all concentrators root USB and USB host controllers.
  Reboot the laptop.

  After this procedure, the operating system should recognize and should install new ports.
  Now you can connect to a plug - and play instruments. These devices should be recognized automatically. But some external USB devices need additional drivers.
  Usually these drivers are provided with the USB device.

  I would recommend this review if necessary!

• Vista - usb ports are not recognized unknown device

  Vista - usb ports are not recognized unknown device. any usb device it appears unknown. all worked a few days hardly, but after that I connected my Kodak camera - which does not, now, nothing works. Any help would be appreciated.

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  Try to connect USB devices to a different USB port and check if you are able to access.

  Method 2:

  Click on the link below to run Fix it which will help you to solve the problem.

  Tips for solving problems of USB devices

  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx

  Click on the link below and install the update.

  Rollup cumulative update for USB in Windows Vista Basic components

  http://support.Microsoft.com/kb/941600

  Try to connect the camcorder to the other USB port and on the other computer and see if the problem is resolved.

  Method 3:

  Let us try to disable the Antivirus security software and check the number.

  Re-enable the security software after checking the issue.

  You can also try disabling the firewall and check the issue.

  Re-enable the firewall after checking the issue.

  Method 4:

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot

  Step 2: Enable half the services

  Step 3: Determine whether the problem returns

  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns

  Step 6: Resolve the problem

  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  After checking the problem, turn the computer back to the Normal mode.

  Uninstall or update the program that is causing the problem.

  Check whether the problem is resolved.

  You can also check out the link below.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/6be4581d-8fbd-407F-815E-b475c35ca586

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Error when the USB ports are empty: "USB device not recognized".

  Original title: get popups for error USB malfunction even if nothing is plugged into one of my USB ports

  I get this error message appear several times on my computer hp laptop with Windows Vista Home Basic: USB device not recognized. One of the USB devices attached to this computer has malfunctioned and Windows does not recognize him

  But I have nothing in my USB ports! They are all empty. I removed everything. Nothing can stop this popping up every 15 seconds. I tried to uninstall all USB drivers in Device Manager, but this thing keeps popping up. Please help me. When I plug in devices to my USB ports, they always seem to work properly. The error message appears totally disconnected the actual functioning of one of my devices.

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135
  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  Method 2:
  Try running this fixit and see if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  It will be useful.

• My USB devices are not recognized, but they have a power

  My USB devices are not recognized, the only ones to be recognized are my mouse and keyboard. Each device is powered (motherboard works fine), but Windows 7 isn't their read (although sometimes I'll get a code 43). I have the latest chipset.

  I tried right click and uninstall each device and rebooted the computer. Nothing has fixed this.

  My external hard drive, ipod and other devices that involve the transfer of data seem to ONLY get power and nothing else.

  It is not material because all my devices work on my laptop. Also my motherboard works fine (it's the 2nd RMA) and it has been tested at the factory to make sure of him.

  I would really appreciate help with this

  Hello

  Please follow the methods.

  Method 1:

  Run the troubleshooter from the link.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

   

  Method 2:

  Try to uninstall and reinstall the USB controllers

  a. click the Start button.

  b in the start search box, type devmgmt.msc and press enter

  c. expand Bus USB controllers

  d. right-click on the first USB controllerr under Bus USB controllers and then click Uninstall to remove it. Repeat these steps for the entire USB under Controllers USB Bus controller.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  I would also ask you to contact the manufacturer of the computer to help.