Balance of capital of CIP projects.

Similar Questions

• Capital Cross load project

  Hello
  
  Our customer want to use transverse load (through sobs) for an investment project. According to the transverse load metalink note is not allowed for capital projects.
  
  No work around using transverse load for an investment project
  
  Thanks in advance
  
  Govind

  Hello

  I suppose you want the project to take advantage of the assets on the owner OB body.
  Expenses incurred by the other OR do not generate assets for the provider, only internal revenue or cost recover.

  You can consider the invoicing facilities of project inter where the receiver is the capital project, while the other OR are in charge, a project of provider. The project provider will charge to the project.

  Dina

• CAPEX - capital assets under Construction

  Hi all
  
  I'm currently considered the 'out of the box' Capex planning module and trying to decide how best to make changes so that we can plan for assets that are under construction.
  
  Out of the box, it seems that you can only enter a total value of an item and put into service on a given date. We want to be able to plan on a monthly basis and use the total of the periodic values for depreciation etc..
  
  Have experience of humanity this change? Advice, ideas etc. ?
  
  Thank you in advance.
  
  Martin

  It is now more clear. I think that your starting point should be ' 08 a spending capital summary - section Details '.
  By changing this form and the attached business rule, you should be able to collect data on expenditures of capital of planners. Within the same business rule, you should be able to map the input data to the balance sheet and cash flow. CAPEX planning must support most of your out-of-the-box requirements, I think.

  There is however another premature condition of the active call and the projects. The challenge with it could be the fact that a project can end up under the name of several capital or several projects of becomes an asset once completed. To meet this requirement, you may need to create a separate dimension of projects. Here is a guideline of the Capex Administrator's guide:

  http://download.Oracle.com/docs/CD/E17236_01/EPM.1112/cpx_admin/ch03s10.html

  See you soon,.
  Alp

• Final Cut Pro - sound level (EBU r128)

  Currentl, I work for a good balanced "Loudness" EBU r128-standard project in Final Cut Pro. I was surprised that I wasn't able to find audiometers for verification and/or balancing tools / normalize the sound level.

  Any tipps?

  I know: just the fact that I wasn't able to find it's not and the indicator because "he is not here." But if she's not here, why is it called 'final' cut?

  Kind regards

  #JoPhi

  read excellent Ronny suggestions in this thread:

  http://www.FCP.co/Forum/4-Final-Cut-Pro-x-FCPX/22706-R128-LUFS-in-FCPX

• Yet an another installation tips - new generation I7 - 5930K

  Hi all

  I am building a new platform for publishing and I need some advice, I'll be happy if someone can look over it and check I don't miss anything.

  View profile

  • Software used
    • Adobe first CC
    • Media Encoder - export to dvd + h264
    • Yet Media - creation of menus
    • AE will be used in the future
  • The 40-minute film editing, loaded with effects (both 1st and 3rd part as the red giant)
  • Images:
    • Currently - various sequences of different cameras I've worked with several photographers video.
    • It is mainly DSLR and GOPRO, and the size is about 100-200 GB per movie.
    • Future proofing - Assembly of the 4 k images

  Pending issues

  • Is it balanced?
  • will it be sufficient for 4 k?
  • Should I buy an additional graphics card?
  • I don't know a lot about the coolers, I appreciate your help with this.
    • At the moment I just took the noctua to the only CPU - I don't know yet, it fits the case
    • What extra cooling?
  • I reuse disks hard 'old', don't you think it's ok? or is not a good place to save. I don't want to create a neck of the bottle after this purchase.
    • OS / software - SAMSUNG 850 PRO 128 GB
    • Work - Raid drive of 2 * Western Digital Caviar Black 1 TB
    • Offline files / backup - 2 * Western Digital Caviar Green 2 TB
    • Scratch disk is the new listed 950 down

  Build

  Processor: Intel Core i7 - 5930 K 3.5 GHz 6 - Core Processor

  CPU cooler: Noctua NH - D15 CFM 82.5 CPU Cooler

  Motherboard: Asus X 99 - DELUXE/U3.1 ATX LGA2011-3 motherboard

  Memory: G.Skill Ripjaws V Series 32 GB (2 x 16GB) DDR4-3000 memory

  Storage: Samsung 950 PRO 512 GB solid state drive m2-2280

  Video card: EVGA GeForce GTX 980 Ti 6 GB Superclocked + ACX 2.0 + video card

  : Nineteen hundred red Full Tower ATX Antec case

  Power supply: Antec 1300W 80 + Platinum Certified fully modular ATX power supply

  The budget was stretched to build this platform, so please, be gentle with your recommendations

  Any help will be MUCH appreciated.

  Edit:

  Should I get off at 5820 & 99 x - a MOBO and add a 2nd SSD for the media?

  Kind regards

  Mehdi.

  I saw the 5820 k markers once overclocked, similar to the k 5930 scene. so for me the upgrade to the k 5930 is only for the pcie lanes. If you're looking for more quickly, 5960 x 8 cores is the next step toward the top, but more than 2 x the price. If you need that performance, I will try to use the as a temporary remnant 5820 k, just to get to broadwell-e 10-core. It is rumored to 2016 q2 release.

  It will cover 4 k edition?  Read this recent post:

  Re: First generation PC - GoPro 4 K video editing with Premiere Pro and AE - Opinions

  One word: glorious! 4K video editing is out of this world. In the source monitor and program videos are played with a 'complete' resolution with zero loss of images. Classification and color of the color correction is amazing also. I can manipulate each parameter and see it change during video playback. The rendering is seconds fast, light for a 2 min clip. The encoding is super fast.

  What to update then?  We can only try to recommend a balanced build based on your projects and media. If you do not have the system and launched, you would be able to see where the bottleneck using performance monitoring programs. first and most of the software adobe for the most part depend on the cpu. Since you have the gtx 980 ti and samsung 950, the next update would probably be the cpu. If the 5820 k is not enough, the next upgrade of processor will the kernel broadwell-e 8-database $600-ish or 10 at the $1 k - ish. the only faster cpu upgrade option for the asus x 99 mbd would be a xeon, but which would be very costly and require an ecc memory. After broadwell-e/ep next gen cpu will require a new motherboard.

• How can I add files imported into sequences using ExtendScript connection of Premiere Pro?

  I really want to know the answer to this... I'm trying to create a script (in ExtendScript for Premiere Pro) that will load into the specified video files, attach them to the specified start and stop time, place it in a sequence and then export the resulting film.

  I understand that Adobe has no official documentation on the scripts for Premiere Pro, so I worked from the data (in the ExtendScript Toolkit or ESTK) browser and a collection of handy references I found to links like this:

  http://WEBCACHE.googleusercontent.com/search?q=cache:http://cssdk.adobesites.com/SDK/2.1/d ocs/WebHelp/references/csawlib/com/adobe/premiere/App.html

  (You can replace the 'App' with other class names, but they must always be properly capitalized, as a 'Project' or 'TrackCollection'. Pages list properties and methods to the classes, and are the only place where I was able to find what kind of parameters/arguments methods expect.)

  I loaded correctly in the CSV file that specifies the information required. I also know how to import video files and create a new sequence (as explained here: http://forums.adobe.com/thread/1177191). The pain that I am experiencing now is to get the imported files properly cut and placed in the sequence. (I see that the activeSequence has methods like setInPoint and setOutPoint, but that doesn't seem to translate into the correct trimming to export).

  Here is my code (with comments to show the flow of the global script):

  #target premierepro var myDir = "G:\\directoryWithVideoFiles\\"; // defined "indexOf" subfunction here // ***** begin main body of script ***** // (dataRuns has fields runName, startVideo, startTime, stopVideo, stopTime) // Import video files listed in dataRuns var vidFiles = new Array; for (i=0; i<dataRuns.length; i++) { if (indexOf.call(vidFiles,myDir + dataRuns[i].startVideo + '.MPG') == -1) { vidFiles.push(myDir + dataRuns[i].startVideo + '.MPG'); } if (indexOf.call(vidFiles,myDir + dataRuns[i].stopVideo + '.MPG') == -1) { vidFiles.push(myDir + dataRuns[i].stopVideo + '.MPG'); } app.project.createNewSequence(dataRuns[i].runName,''); } app.project.importFiles(vidFiles); // at this point, for each run (called runName) I need to: // - take a clip of the startVideo from the startTime to the end of the video // - take a clip of the stopVideo from the start of the video to the stopTime // - put clip 1 at the beginning of the associated sequence, & clip 2 right after // - export the sequence as a new video file

  The example PProPanel shows how to import files and make the sequences. The missing part (from above) = there is no supported method for adding clips to sequences.

  Tim, if you would, please write to me at my day job [b b b at adobe dot com] an overview of the workflow (s) you wish to support, and I can better frame.

• FlexUnit on Github

  http://github.com/FlexUnit/FlexUnit

  What are the plans for FlexUnit on Github vs SVN? Every two will continue or FlexUnit moved to Github?

  Robert,

  Versioned and stable versions will continue to be pushed to SVN on a regular basis, however, day to day development will happen with github. There are several reasons for this, and more information about this will be available soon. The main reason, however, is that Adobe is not in a position to be able to support this project internally for the moment. Give a meaning that tasks such as permission to access to the SVN Repositories for contributors or tracking potential bugs isn't on their screen radar now their calendar of releases and pressures.

  For example, we worked with their blessing to balance the needs of the project with the concerns of Adobe.

  Expect to see some very detailed notes about the direction of the project and the global workflow very soon. We have worked hard to get these pieces together and it will be soon.

  Mike

• MyRIO PID Ball Balance project or selection

  Good afternoon

  I am a student in engineering mechanics senior year and I'm working on my thesis project. I'm creating a TA for students. I try to balance a ball on the touch screen using a microcontroller. Here is a link to show you what it is that I am creating: https://www.youtube.com/watch?v=j4OmVLc_oDw.

  I am looking to buy a myRIO NOR for my microcontroller. I want to be able to send signals output for servo motors to control the position of the ball on the touchpad. And help or suggestions or advice would be greatly appreciated. Could someone please explain to me what microcontroller would be best for this application? And if you can, what servo would work better with a myRIO NOR for this project. Do I need a drive motor if I use a myRIO?

  Thank you kindly,

  Hi JCG77,

  If you are interested to buy a myRIO, I recommend OR make meetings. The specifications can be found here:

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/211694

  I found no specific recommendations for servo-motors on the myRIO. I found an example of a community to control a motor on a myRIO. So, it would seem that you are not asking for additional modules

  https://decibel.NI.com/content/docs/doc-36270

  I don't know that you would be able to provide enough power for any engine/servo substantial but here is a link to the adapter engine Digilent for myRIO. If you want a recommendation, I would suggest speaking with digilent. A link to there website is on this page as well:

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/212739

• How to load partially opening in the modules of ERP projects balance

  Hi friends,
  
  Version of the module R12 Oracle, value already opening balance projects into the system during the time.now I need to go to edit old entries. (not all). I would like to know how to to this topic. I'm really spoon feeding phase. Opening balance varies annually according to the percentage.
  
  Also the entries I'll change should not affect module GL. Please if someone guide me, it's a gr8 help.
  
  Thank you very much in advance.

  Hello

  It is not not clear on your post what kind of opening balances, you speak, and how those that have been entered. I assume you mean historical values of the amounts of fees. I suppose that during the implementation of those there grows where it is entered as miscellaneous expenses. If this is the case, go on and enter the additional costs as an additional expense, using the form of pre - lots of approved expenses. Otherwise, you might load expenses using web ADI, or develop a script to load transactions into the open PA interface.

  There could be several solutions to avoid additional operations to affect GL balances. However, since you work after that first balances were already there, you can use the same solution as the advance team has already taken. Why reinvent the wheel :)

  Dina

• Accounting active projects entered

  Hello
  
  We have a requirement as below
  
  Customer wishes to build a building and given to the supplier for the construction of the building, customer want to track construction as a project and each time, payment given to the seller that he wanted to follow him on this project as the costs incurred for the completion of the construction. Once the construction is complete our client wants to capitalize the expenses incurred for this project.
  
  Help me understand how the entries will be created, because we receive invoices from suppliers directly from AP and have not any integration of PO.
  
  
  Thank you
  David

  Hello

  Create a new project or type of Capital.
  When you enter invoices in AP, insert the distributions by project, task, type of expenditure and organization. Validate the invoices from suppliers.
  Accounting on the distribution of the AP should be - debit account PIC and responsibility to the credit provider.
  RPC running: Projects cost Provider Interface. The system will import the distributions of invoice as expenses in projects.

  When the building is finished, enter the location of the value Date of the Service on the assets of this PA project. Run, in the projects, the CPP process: generate active lines. Then CPP: Active Interface to hard assets.
  You get in f mass additions the new assets generated by projects, it user will check the information, perhaps add details and post the lines as assets.

  When you close the first FA period, the system will generate the following accounting-
  CIP of credit, cost of the construction of real difficulty debit account.
  If the depreciation is also due
  Depreciation building of debit and credit account of depreciation reserve.

  Dina

• After the export project from FCPX thud in QuickTime

  Hello

  I have looked for a solution all over but can't find any solution. I really hope someone here can help me.

  I have produced a song myself and now want to add some video clips and then send the final product on YouTube. The music file I imported to FCPX is 48 kHz, 16 bit Wav. Everthing sounds good in the FCPX scenario. In addition, the music file sounds good in iTunes.

  The problem occurs when the final product is exported from FCPX. After export, the sound becomes deaf. Other things also happens to the song. For example: in the intro, I have a trap of working capital. At the end of each measurement, I a harder drum hit. When that hit the drum, the volume of the snare is declining. What is happening not in iTunes. This destroys the sound and is a bit frustrating.

  I tried to export with all the different parameters, that I can find. The same issue occur in iMovie.

  The noise level is not above 0 dB and are never in the Red tip in FCPX.

  I also tried to put the level-12 dB and export the project. Subsequently, the overall volume is too low and the problem persist.

  Hope someone out there have a solution.

  (Sorry for the bad English)

  Kind regards

  Jonas

  Could you post a piece of the original file somewhere?

• Color change after sharing the project

  I use an iMac OS X 10.11.4, mid-2011 and FCP worm 10.2.2.  I'm processing the photos that have been color corrected from Raw files in Photoshop and imported directly into FCP.  I did no color correction in FCP (color balance) or color Board.  When I export the project over to a mp4 file format for playing on a HD TV pictures made a significant change in color.  What awaits a lot on the computer in FCP now has a bright orange tint, it is darker and more contrast has been applied.  The color setting that is applied in PS is sRGBIEC61966.  Someone has suggestions on how to fix this or is there a work-around.  FCP applies to any color automatic processing when rendering a project for sharing?

  Thank you

  No to the last question.

  This color setting in Preferences display system do you use? It must be the default.

• LEGO Self Balancing Robot algorithms

  I would get the algorithms & software used for the Lego NXT self balancing
  robot that has been demonstrated by us Saha (spelling?) during the FIRST
  robotics competition.  I searched the site but can't find
  information related to the algorithm or even the software.  If you
  could help provide this information I would be very happy.
  Thank you, Jon Hauris

  I'm not sure of which showed an Anu, but here is a link to a really nice solution of an individual balancing NXT using a gyroscope.

  It is a student of the Fachhochschule Nordwestschweiz in Switzerland project. They have created two versions:

  1. Download VI for the NXT and let it run stand-alone
  2. Run the VI on the host computer by using a USB to the NXT connection (this way you see all the command parameter more it offers management port)

  http://projekte6.FHNW.ch/Technik/EIT/Herbst2007/BruWid/

  You will find screws, videos and more on the page of the project (in German).

• Project of Siena and probate real estate - Yes, estates - applications

  Hello. For more than two years, I tried to get PayPal, regional banks, national banks - name you - interested in developing a means by which individuals (by choice, become a widower, other circumstances) have no executors of their wills - can be paid balances of the debts to their death automatically. I subscribe to Deathswitch for more than two years, and Deathswitch does not offer one service other than to inform people/institutions of your demise.

  Two years ago, I tried without success to get PayPal developers to challenge it professionals to consider the simple idea. If it would be possible for me to build an application with his own project, could someone familiar with the program let me know here? The level of complexity is perhaps too high or great with legal to perform obstacles. It would be 1) notification (like Deathswitch) an institution of your demise. 2) including as a 'pay Bill' to the Bank in which you regularly paid bills a separate account of the "total balance to death' new; and (3) automatic closing of the account, so that no one would use utilities, or to run credit cards fees - or fraudulently use anything - it on your behalf.

  Thanks as always for all help.

  (IF ANY APPLICATION OR SOFTWARE PROGRAM ADDRESSING POST-MORTEM BILL-PAY/CLOSURE OF ACCOUNT EXISTS, PLEASE POST HERE.)

  Hello

  From your description, I understand that you develop an application that can pay off balances in debt to the death of customer automatically.

  To better help on this, please contact application Windows development team.

  http://social.msdn.Microsoft.com/forums/windowsapps/en-us/home?category=windowsapps

  The backend (post-mortem details) application, you can search by the windows store.

  Hope that the information provided is useful.

• Best practices for starting new projects...

  Hope this does not seem too much question "nooob.

  I was editing a small project from a few months back and has problems with a lag, someone on here suggested, I give in and which would sort all late development issues and he has done much to my relief, I could edit in peace.

  What I want to ask is - are there any other good practice like that I could use to make my life easier...

  Or just basic things I should do before editin, base workflow...

  Just need a few thank you very basic pointers in advance.

  A few...

  (1) do NOT trust auto-enregistre to save your project... with one-s set for say 10 minutes/20saves, in a day's work on a sequence of a project of 4 sequence. The day following a different sequence of work, finding it had been corrupted somehow the day before... and find out ALL auto-enregistre them is recent enough that they are ALL corrupted even. Very bad... very bad.

  Make a backup - as increments from time to time and of course on another drive your standard project files to pass is not a bad idea, because you automatically have a backup system in the event of corruption or disk problems. Not perfect but you will survive.

  (2) Organization of assets is your friend! In came video stops, it is a VERY different beastie. With a structure of folders on your drives hard is wise, if you have a drawing and know where things are... more... learn how to use the thing 'locations', virtual folders and not things really moving on disk, but it can help to keep your projects feasible they get largest & most complex.

  I've seen diagrams for several different people and they were all different... ask about or look at Organization of video projects, organizing first pro online projects... you will get a lot of samples.

  (3) one word: AUDIO! Yet once, from stills I went immediately after learning to make things look pretty (involving a LOT of time learning SpeedGrade)... which is fine, really. I have spent so much time perfecting my audio capture & cleaning PrPro or hearing. I learned my choice muchly and I am now learning hearing. Audio cleanup is for most of the people most important to have the most beautiful images in your videos. Most I have eyeballs do not seem to be as critical as mine are... but surprisingly, the brand I ear is quite commonly used. Well...

  (4) know your Machine! Tools of the trade, including the basic courage of our computers, are very important. MANY posts here are dealing with questions from people not having not actually their rig set up right, including the people who put thousands of dollars/francs/that it is in their "beast"... but it is not really 'balanced' that advocates Page of the Tweaker (the bible to the PrPro/Ae hardware problems).

  Spending $ 2500 on a map of Quadro hot video because you get a little behind in reading will normally squat... because there is no that many 'effects' cards Quadro really help with first, second... that "dragging" is probably because of things like not enough disks to spread parts of the project to avoid read/write and crash that causes the ENTIRE process to wait for traffic to cross... not enough 'real' nuclei (i7 chips as) my studio platform to say that they have '8' hearts, but four are 'virtual'... ninou, he's only got 4 cores REAL), not enough RAM, too few/slow 'ways' or 'tracks' on the bus of the motherboard, not enough of space on one or more drives from spinning, so there is a hangup as things are cached on this drive for read/write... all sorts of things.

  Enough for now...

  Neil