After the export project from FCPX thud in QuickTime
Hello
I have looked for a solution all over but can't find any solution. I really hope someone here can help me.
I have produced a song myself and now want to add some video clips and then send the final product on YouTube. The music file I imported to FCPX is 48 kHz, 16 bit Wav. Everthing sounds good in the FCPX scenario. In addition, the music file sounds good in iTunes.
The problem occurs when the final product is exported from FCPX. After export, the sound becomes deaf. Other things also happens to the song. For example: in the intro, I have a trap of working capital. At the end of each measurement, I a harder drum hit. When that hit the drum, the volume of the snare is declining. What is happening not in iTunes. This destroys the sound and is a bit frustrating.
I tried to export with all the different parameters, that I can find. The same issue occur in iMovie.
The noise level is not above 0 dB and are never in the Red tip in FCPX.
I also tried to put the level-12 dB and export the project. Subsequently, the overall volume is too low and the problem persist.
Hope someone out there have a solution.
(Sorry for the bad English)
Kind regards
Jonas
Could you post a piece of the original file somewhere?
Tags: Professional Applications
Similar Questions
-
Not available in Premier Pro after the export project AE direct text templates
Hi team
I tried to create a few lower third models in AE to use in first pro more later. To speed up the process, I downloaded a few models of a site, but unfortunately after a few minor changes to the export of the AE file does not seem to support models of living text of Premier Pro so I need to create lower thirds in AE and export them individually which I hope to avoid.
Any ideas why this happens? I use both products CC version.
Thanks in advance for the help
Do not forget that you are using the same version of CC for the first and AE (2014,2015...)
and that each After Effects compositions that you want to import have the option enable the model in settings of composition in advance.
It will be useful.
-
I had surgery with vista and Windows mail and setting up the contact email groups, however I had someone export my 'contacts' to another computer that has worked on xp, since which time it is so more ease to set up groups.
I tried for hours as a software specialist and can't seem to solve the problem
Thanks for any help - Pleease
David Rumsey
Missing the Windows Contacts toolbar buttons
http://www.vista4beginners.com/missing-buttons-from-Windows-contacts-toolbarVista - "New Contact" and "Contact Group on new" button missing
http://www.Vistax64.com/tutorials/186477-new-contact-new-contact-group-button-missing.html -
Fallout 3 stops working after the computer wakes from sleep
Since the games for Windows Live 3 is out, Fallout 3 has never been the same. He used to work at best my GfWL and now her nightmare. Recently, after that I quit the game and put my computer to sleep, Fallout 3 will stop working completely after wake up. I try to start it and I get them all is a cursor with a small blue rotating light. What is even more strange, is that my computer goes into a State of semi who no longer meet this point where programs and keyboard shortcuts no longer work, but I can browse my hard drive. I try control + SHIFT + ESC to see what the devil but that causes Windows Explorer to stop working. CTRL + Alt + Delete does not work either. No matter what I try, once I start Fallout 3 after the computer wakes from sleep, I can't do the task to the top manager and I can't use my computer. The only way to get it is to hit the reset button or turn off manually. Can someone please help to get rid of this problem?
Hi murphy449,
1. did you of recent changes on the computer?
2. the problem only happens when you start fallout 3 after the sleep mode?
3. are you able to wake the computer quits successfully sleep mode?
4. What is the version of Windows installed on the computer?
Method 1
I suggest that you manually download and install the latest drivers for display on the computer card and check if it works.
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
Updated a hardware driver that is not working properly
Method 2
If the previous step fails then I suggest that you try the clean boot procedure to check whether a third-party program installed on the computer is causing the problem.
To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See the link below to learn more about how to clean boot.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
If the previous step fails then I suggest you check the observer after return with details and events for the cause.
What are the information contained in the logs of the event (Event Viewer)?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer
What are the information contained in the logs of the event (Event Viewer)?
http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
After the upgrade yesterday from Vista to Windows 7, now my Cisco VPN does not work and I get an error message titled: grounds 440 driver fault. Any ideas to fix this?
This was the solution! The works of vpn as $ 1 million now. I followed the instructions above to enter the uninstall program and selecting the repair option. I rebooted the machine, then used the troubleshooting on vpn software compatibility option. Selected Windows windows xp (service pack 2) as the correct software and cisco vpn client started right up.
Thanks, Nick!
Rick
-
Recently upgraded to Windows 7 to 10. I have Lightroom 6 CD Version Dell PC. Now, after the export of an image, I have out of Lightroom before I can work on the module development for another photo. Is this a compatibility issue? How can I solve this problem? Thanks for any help.
Lightroom preferences, tab performance.
-
Doc becomes registered after the export of layers in Jpeg.
Hello
I have praav1s a plug-in to export the jpeg layer.
all right, except that the active document is not registered after the export of the layer.
I want to know that it can be the case or am I wrong anywhere?
the process that I follow-
1-) created an Artset empty and filled with contents of the layer.
2-) then rasterize the Artset.
3-) then created a data filter that contains the path where exports.
(4) then used (AsJPEG) to create a jpeg.
Can anyone explane, in what stage I am wrong.
I tried many things but it is impossible to get the answer.
Help, please...
Thank you.
If you have the artset pixilated, which usually creates a Raster art on the artboard. I am assuming that you can use to export your JPEG. Even if you delete this raster, you 'hit' the document.
If you want the rest document "unregistered" when you are finished, you have two options:
(1) set the indicator modified document using AIDocumentSuite::SetDocumentModified (). Note that you should only do this if you do not know you put everything back as it was otherwise, the user cannot save until they change something!
(2) use AIUndoSuite::UndoChanged () - this acts like you click on cancel, but there is no "Redo" to worry about. In this case, only do this if you are sure you want to go back to the way things were when you started your export. For things export one layer in JPEG format, this method is not ideal as you are unlikely to want to change the document for export (although this shows why that may sometimes be necessary).
-
Folio 1020 G1 keyboard works not for 30 seconds after the computer wakes from sleep
I have several books of Folio 1020 G1 where the integrated keyboard does not work for about 30-60 seconds after the resumption of the operation of the standby mode. Everyone met this problem or a solution?
The touch pad, touch screen and a usb keyboard immediately all work.
They work on the load of the plant, but these machines were photographed with Windows Enterprise 8.1 x 64 using Configuration Manager 2012. The pack of drivers for this model of http://ftp.hp.com/pub/caps-softpaq/cmit/HP_Driverpack_Matrix_x64.html, http://ftp.hp.com/pub/softpaq/sp70001-70500/sp70362.exe is applied successfully during the imaging task sequence. I also miss the key features of the FN for brightness and microphone mute, but sp70321.exe (http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=7343091 & swItemId = ob_144333_1 & swEnvOid = 415... does not solve this problem.
This question has been somehow created by installing a software Synaptics 17.x version followed by the installtion of the 18.x software required above it. I don't know if this software was automatically installed from Windows builtin drivers or other drivers imported into Configuration Manager have been incorrectly applied, but running "rundll32.exe"% ProgramFiles%\Synaptics\SynTP\SynISDLL.dll",SilentUninstall_CallerWillReboot" in the sequence of tasks before apply the package stops sp71067.exe the problem didn't happen. "
-
Windows Movie Maker - Audio only, which plays in the exported project
Hello.
I did a project in windows movie maker with video and audio files. Project perfect cheek (the two audio/video playback) in windows movie maker when I am in the phase "creation/editing. When I export it and save the project as a. MP4 or. WMV file and try to play in Windows Media Player, Quicktime or VLC, as the audio of my theatre project. There is no video. However, when I play the other. MP4 files or. WMV files via these media players, they play very well. So I think that the problem is with the export of the Movie Maker project. Also, thinking that I have perhaps incompatible video files to Windows Movie Maker, I tried just using Jpeg files with audio to create a slide show, thinking that it would work with standard Habitat. Yet once, however, that the audio is played with a project containing pictures (no video). Any ideas?
Audio was working fine, just no photos or video showing once the project has been saved as a movie. So, I tried your solution of creating a short slide show with photos only and no luck. I uninstalled and reinstalled movie maker and still no luck. Downloaded the pack codek for windows 7 and still no luck.
So, I decided to download the Vista windows movie maker for my OS to windows 7 and everything works like a charm. Don't know how or why, but the version of Vista is flawless on my windows 7.
Thanks for your suggestions. I appreciate the help.
-
HI, I'm getting an error code 604 when I try to import images, it comes up with the following message, some import operations were not made, the following files were not imported because they could be read... items 1-100 etc.
I import the raw files from my card, it's no different than when I imported on the free trial version, but now I've updated it wont let me import, everything else seems to work very well with the catalogue, export etc. Please help me as soon as possible, if someone had this problem?
Hi thank you 99jon, you're perfectly right, it's to do with permissions and thanks for putting me on the right track to fix, the destination had for some strange reason changed during the upgrade, so raw files went to a file on the hard drive which has permissions rather than the images where he used to go (until the upgrade). If anyone has this error code 604, please look to see where the images are current, is not always easy to say right away, I saw he entered the hard drive and initially assumed that it would go into pictures where it is before the upgrade, it would be useful that adobe has this error code with an explanation of what this means on their list of troubleshooting , but could not find any information anywhere. It caused me a lot of delays with hundreds of images that I work on different maturities, but thank God its fixed, very happy
-
I like to play trump stings on Internet and Internet Backgammon that's installed with Windows 7, Home Premium edition. However, after the automatic updates installed yesterday, I noticed that the link to play the Internet Backgammon is no longer works. It's just a dead link. I can click on it, but nothing happens. Not even an ounce of trying to open. It's just 'died '. I can still play trump stings on the Internet and I have no trouble to access the internet, so I wonder if this is just a small problem or do you have Microsoft remove Internet Backgammon as one of its windows games? Note, this is Internet Backgammon that is installed on the computer, in the folder games - it is NOT the version of backgammon on MSN that you actually go to the internet and to play. I am referring to the one in the Games folder, which is installed with Windows 7. I play this game almost every day, so I hope that it will be restored. I wish there was a way to contact Microsoft about this, but there isn't and they charge, then...
Hi Kentuckywoman,
Welcome to the Microsoft Community Forums.
According to the description, it seems that you are facing problems with the game of Backgammon Internet. I'll be happy to help you in this problem.
-What are the updates installed recently?
Method 1: I suggest you to perform system restore and see if it helps.
What is system restore?
http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore
System Restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions
Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
Method 2: If the problem persists, I suggest to uninstall and reinstall the game, then check if the problem persists.
Step 1: Uninstall the game:
(a) go to Start and in the search type' features on or off Windows activate'.»»
(b) click on "turn Windows features on or off". ""
(c) develop the games, Internet games and uncheck the brand in front of Backgammon Internet.
(d) to restart the computer.
Step 2: Reinstall the game:
(a) go to Start and in the search type' features on or off Windows activate'.»»
(b) click on "turn Windows features on or off". ""
(c) develop the games, games on the Internet andcheck the mark in front ofBackgammon Internet.
(d) to restart the computer.
I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.
-
Fingerprint reader does not work after the laptop awakens from his sleep.
Pavilion DV6-6c15nr
Windows 7 Home Premium
Fingerprint reader works fine when the computer starts. The drive works fine if I manually lock the system. When the computer enters mode "sleep" through inactivity, then wakes up from his sleep, the fingerprint reader does not work. The player power led does not illuminate, the player does nothing if I drag a registered fingerprint. I must select use authentication information and enter the Windows password. Device Manager says device working properly but it doesn't help. I checked for BIOS, Windows and driver updates but I run in all aspects.
Hello
Uninstall the software and current driver for the fingerprint reader.
Resources:
Uninstall software in Windows 7Uninstall or change a program in Windows 7
Download and install the latest driver from here.
Download and install the latest version of the software from here.
-
Why my sequence does not disappear after the export of the project?
After a late night of editing, I made and exported the project (mp4). This morning the customer requested a change, but when I open the project, media source is here. There is no sequence, and I could not find the file. Suggestions?
(First project in Premiere Pro after several years of use of Premiere Elements).
the sequence should be there, but I have nothing.
Well, the only two possibilities are that you just have not yet found, or someone really delete.
If you remember the name of the sequence, you can search for it at the top of the project Panel.
-
Why my JPG so loses quality after the export of the PS?
I use PS3. For some reason a JPEG that is exported from my PS was of very poor quality. See below:
Here's what the image looks like PS, notice how the color dynamics is
http://i970.Photobucket.com/albums/ae186/Planet_Invader/random/picture1.PNG
Here is the JPG image after export, the satuation fell of so much!
http://i970.Photobucket.com/albums/ae186/Planet_Invader/random/picture1.jpg
Here's my setting for export
http://i970.Photobucket.com/albums/ae186/Planet_Invader/random/Picture2.PNG
The strange thing is, when it is phothographs, it doesn't have this problem.
Also, can someone tell me what they would do to make the highest effect? I've pretty much has attracted some of these forms wavy and copied them and placed individually, which was very time consuming. If you have a better way please let me know! Thank you!
Lack of understanding of color management?
In Photoshop, Photoshop is using the document profile and compensation for your screen.
Outside of Photoshop, it will depends on what application you use to display the image to know if it will fix your screen or not.
-
ePub look dirty and broken after the export of Pages
Hi all
After too much trouble, I had to make a version duplicated my book in app Pages only because iBooks author supports ePub export.
How to finally after all pages and export to ePub crossing I saw OOPPSS! nothing is in the right place (background images, text, page numbers and so on). I need help.
Pages: 5.6.2 OS X: El Capitan 10.11.1
Thank you
iBooks 2.3 author does support ePub3 export but you must start with the ePub models:
About ePub files created with author - Support Apple iBooks
Peter
Maybe you are looking for
-
Qosmio F60 - cannot use the touchpad scrolling feature two fingers
Hey there, I recently got a laptop hard drive to my Qosmio f60 replacement and windows had to be reloaded.Then my cell phone worked before I could two fingers scrolling on pages and others.Now, I can't, and I can't find a setting for this anywhere. I
-
questions about hp4140b driver
Can someone tell me how to install the drivers for hp4140b pA METER/DC VOLTAGE SOURCE? Of many thks dabao
-
The on-screen display is 90 degrees to the left
My computer was typing all backward. I have now, I think, fixed this problem. However, around the same time, the screen made a 90 degree turn to the left. I'm not able to find tips on how to do so that he can 'right' itself. Please help - I am ge
-
Opens the Hotmail Inbox, but I can't open, delete, answer or do anything
I had computer checked - no problemI ran a fix-it-nothing
-
The media center app on my xbox 360 crashes when the application invalid "unable to launch symaddin" appears. How can I fix?