CAPEX - capital assets under Construction

Similar Questions

• Windows Vista Help & support file error msg: "not found help topic this content under construction.

  Windows Vista when I open the help file & support I get this error msg in the body of the glass:... "Help topic not found. This content under construction. We were able to retrieve the requested topic. "Please tell me how to get help & content & data support or fix this problem debilitating w/vista.  Thank you

  Hello

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you cannot open help and Support on the computer.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  1. have there been recent changes to the computer before the show?

   

  Please go ahead and follow the steps mentioned below and later a update on the State of the question.

   

  Method 1: Difficulty of Windows Desktop Search when it hangs or no display of results.

  http://support.Microsoft.com/mats/windows_search

  Method 2: Try toscanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/929833

  Method 3: I can not open the help that was created in Windows Help format (WinHlp32.exe)

   http://support.Microsoft.com/kb/917607

   

  WARNING:
  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  Back up the registry: http://windows.microsoft.com/en-us/windows-vista/Back-up-the-registry

  Please follow these recommended steps and post if you still experience the problem.

• Receive error message: "help topic is not found. This content under construction. We were able to retrieve the requested topic. »

  original title: Windows Help and Support link no longer works.

  Very recently, in trying to use the help and Support Windows a blank page appears with the following error message:

  Help topic "not found".

  This content under construction

  We were able to retrieve the requested topic. »

  The same problem also happens with IE8 help and Support.

  Hello TodAce,

  Please see the link below on the Microsoft TechNet Forums.  There is another user posted the same error message.  Please let us know status.

  Help and Support - screen text formatted correctly hyperlinks / missing

  http://social.technet.Microsoft.com/forums/en/itprovistasetup/thread/b3a7ddd0-59D3-4386-ab70-3f48424447b6

• How can I get the help topics in windows on windows vista, when I click Help on any page web I always get the message of help topic not found this page under construction

  I BOUGHT A SECOND HAND TOWER WITH WINDOWS VISTA HOME PREMIUM PREINSTALLED, THE PROBLEM I HAVE WITH EACH WEB PAGE OR PROGRAM, WHEN I CLICK ON HELP ON THE TOP OF A PAGE, I GET THE WINDOWS HELP AND SUPPORT WINDOW POP UP. WHEN I TYPE IN A HELP TOPIC AND CLICK SEARCH, I ALWAYS GET A MESSAGE TELLING ME RESEARCH TOPIC NOT FOUND AND BELOW WHAT HE ALWAYS SAYS THIS PAGE IS UNDER CONSTRUCTION, IT DOESN'T MATTER WHAT HELP TOPIC I PAT ON THE SEARCH BOX, I STILL HAVE THE SAME MESSAGES

  SOMEONE CAN ME ADVISE ON THIS POINT.

  I WOULD REALLY APPRECIATE ANY HELP.

  JOHN ROBERTSON VS

  Hi JohnRobertsonVS,

  Method 1

  Refer to the Microsoft article to download and install Windows Help program (WinHlp32.exe), check to see if it helps.

  I can not open Help files that require the Windows Help program (WinHlp32.exe)

  http://support.Microsoft.com/kb/917607

  Method 2

  Try the method below and see if it helps.

  a. Open a command prompt window and run the following command:

  regsvr32 msxml3.dll

  b. Press ENTER.

  Note: To open a command prompt window, click Start, click programs, accessories principally made, right click Guest and then click run as administrator.

  Method 3

  If the previous step fails then I suggest that scan you SFC on the computer that would be a corrupt system file search.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.

  For more information please visit the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• help and support is under construction

  When I open windows help and support, an error message like this one:
  Help topic not found this content under construction

  We were unable to retrieve the requested topic

  Please, I beg you! can someone help me!

  Hi vilchardvillamor,

  I suggest you to download and install the below update and then see if it works well or not.

  http://support.Microsoft.com/kb/917607

• Online site with a mobile site under construction

  I developed a desktop site which has been downloaded to local server and is now online. I'm now working on the smartphone version of the site which may take several weeks to complete. I note that once the mobile version is open in the file of Muse, all downloaded changes of the desktop on the server site include a manifest file that reflects the existence of a mobile version and automatically redirect all visits of smart phones for this version, even if it is unfinished. This is not what I want to do before completing the mobile version.

  Is there a preferred way that allows to work on a version of a site while another version is already online? Is it easier to make a copy of the file with a different name Muse then rename and download the entire site of this copy of the Muse when it's over?

  The other option is that you can create a homepage for Mobile who can say "Mobile site under construction" create a link here to go to the site office.

  When creating the link, make sure that you link to the home page of the office. And in the plan view of the Mobile site, make sure that you uncheck the option "Export Page" of pages so that when you publish/download site, other mobile pages are not uploaded.

  Kind regards

  Sachin

• BB10 Error gold under construction

  I just downloaded and installed the BB10 Gold.

  Pulled up and tried to make a construction on an existing project that I had any problem with before.  I get a compilation error:

  Internal generator is used to build *.
  QCC o src\main.o... \src\main.c-V4.4.2, gcc_ntoarmv7le-w1 - IC: / BB_SDK/target/qnx6/usr/include/freetype2 - IC: / BB_SDK/target/qnx6 /... / goal-override/usr/include - D_FORTIFY_SOURCE = 2 - c - g - fstack-protector-strong O0
  Cc1: error: unrecognized command line option '- fstack - protector-fort ".
  CC: C:/BB_SDK/host/win32/x86/usr/lib/gcc/arm-unknown-nto-qnx6.5.0eabi/4.4.2/cc1 caught signal 1
  Build error has occurred, build is stopped
  Time consumed: 4483 ms.

  I don't know what to do with it.  There is obviously some sort of command line option that is not fair, but I have no experience in changing these kinds of things.

  Any suggestions?

  Well, my solution is (I don't know what are the other consequences it can have):

  (1) go to the project properties (I assume you are using QNX Momentics IDE)

  (2) generation C/C++

  (3) settings-> settings-> control out of QCC compiler tool-> uncheck "improved security (- fstack - protector-strong)" option

  (4) rebuild

  Works for me.

• Firefox under a limited Windows account search using search engines under construction on the search bar + awesome bar.

  He works in the administrator account, but not for all other limited accounts. I created a new limited account if she had no addons or changed options but research still does not work.

  If I enter anything in the awesome bar / search bar, it displays "Looking up nameofwebsite.com"instead of "Waiting for nameofwebsite.com".

  I noticed that he search using https:. If I search using google, I can take the part s of https for HTTP is used, and when I press ENTER, it works, but the browser adds in the s and research in https.

  Everything works fine except for the search functions.

  I updated Firefox and the problem seems to have disappeared.

• Satellite L650-OED under construction speakers of crackling and his intermittent

  Hello.

  I just buy a new laptop (L650-OED) that is running windows 7-32 bit.

  The built-in speakers make a crackling noise and do work only intermittently. When you adjust the volume upward or down, they work for a few seconds and then cut.

  I tested the sound through the headphone jack that works perfectly. I have also reinstalled the device driver (Conexant HD Audio 4.119.0.61) but it did make a difference.

  Is there anything else I can try, or is it a warranty issue?

  Appreciate any advice.

  Concerning
  Pete

  > I tested the sound through the headphone jack that works perfectly.
  Hmm. This would mean that this has nothing to do with the sound card or audio driver but with faulty speakers.

  I therefore recommend to ask a technician for a notebook check possibly speakers must be replaced. If the warranty is valid, everything must be done free of charge.

• Cancellation of order is currently under construction.

  I ordered my Moto X PE to 24 Sep and almost immediately got the status 'pending '. I have clarified the issue with the order specialist and she told me to wait 48 hours. Two days later they told me to wait another 48-72 hours for approval. I decided to cancel my order and buy another phone. At the time of the cancellation of the order status was still "hold it or cancelled. So I did the final cancellation to 26 Sept. But today (29 September) I received a surprising e-mail "we are assembling! Customer support just told me: 'Yes. you have cancelled your order three days ago, but the review team did not notice and we cannot do anything right now. " I'm a little frustrated.

  What is the best way to do in my case?

• Kind for groups under construction according to the Source file name property

  Hello

  I use a script to load the 4 files in th data portals and later graphic some selected channels. The problem is that when I choose the files via a dialog box, the order mixes in the data portal. I wish the files to be sorted according to the name of the source file. Here's the script of loading:

  Dim i, intLoop, group b
  
  Call Data.Root.Clear)
  
  If FileDlgShow (DataReadPath, "TDMS files, *.tdms", "DataSelection", True) = "IDOk" then
  
    For i = 0 to UBound (FileDlgNameList)
  
  Call the DataFileLoad (FileDlgNameList (i), "TDMS", "Load") DataFilename, FileImportFilter, ImportAction
  
  Next
  
  End If

  Is there a way I can do?

  Thank you!

  Hi Saloutios,

  You can sort the table of FileDlgNameList using the BubbleSort algorithm, for example:

  Void BubbleSort (arr)
  
      Dim value, numEls
  
      Dim index
  
      Dim firstItem
  
      Dim indexLimit, lastSwap
  
      "take into account the optional arguments.
  
      numEls = UBound (arr)
  
      firstItem = LBound (arr)
  
      lastSwap = numEls
  
      Do
  
          indexLimit = lastSwap - 1
  
          lastSwap = 0
  
          For index = firstItem to indexLimit
  
              value = arr (index)
  
              If (value > arr (index + 1)) then
  
                  "If the elements are not in order, redeem them
  
                  (Index) ARR = arr (index + 1)
  
                  ARR (index + 1) = value
  
                  lastSwap = index
  
              End If
  
          Next
  
      LastSwap loop while that
  
  End Sub

  The input array is sorted after that you called this procedure.

  Hope this helps

  Winfried

• Build error cannot find the distribution under construction

  I had a similar problem like this thread.

  http://forums.NI.com/T5/LabVIEW/build-error-can-t-find-distribution-being-built/TD-p/1462842/page/2

  My old guard Installer and ask for copy of the installation is finish. Quite annoying because it takes so long to get there. Any advice would be appreciated. I've attached a screenshot of my error message.

  You created this problem by running a build already install on your development computer. If you are distributing drivers with your installer you should NEVER run the installation program on the machine on which you build.

  Here's what happens:

  All software shops NOR where it was installed since in the Windows registry. When you initially installed it note where you install (DVD, network drive, etc.).

  When you build an installer in TestStand will prompt for this location if it cannot find the original installation files (that is, if you take the DVD from the drive disconnected from the PC from the network, etc.)

  What happened on this PC is you have to build a Setup program, and then you run this installer on the PC, and because the pilots were already present it replaced the path stored in the registry with the path where your Installer (e.g.) was C:\Temp\long path)

  I'm guessing that you have now deleted this former Installer. That means that you have to re - run installers for ALL the software to, OR that you have installed on this machine so the registry is updated to point to the path of DVD or the network path.

• Help topic not found this content under construction

  Hello

  I have a Pavilion PC with Windows Vista 32 bit OS.  My help and Support feature does not work in offline mode or online. I just installed the 32-bit hotfix for HP Advisor (sp43112) hoping that would resolve the problem. No luck. Any suggestions will be greatly appreciated.

  Hello

  The proposed solution did not help. I found another suggestion (somewhere, I can't find it now) which lead me to the solution of my problem with no function 'help and Support '. The solution was to fix some permissions problems. I downloaded the program monitor and started then tried to access to help and Support one or two times and then closed the monitor program. Then I saved the file as an excel (.csv) file and open it in Excel. I've sorted the file on the column of search results then all files listed with the result of denial of access.

  There were six files "access denied." I opened all the files and hidden folders then went to each file and changed the security settings allowing everyone access to the files. Here is an example of the path I followed to locate the files where access has been denied: C: / > ProgramData > Microsoft > support > customer > 1.0 > US, then the name of one of the files is: Help_MValidator.H1D

  I always try to find the fix someone provied so I can thank this person, any help on this would be appreciated.

  I hope this helps someone, be it finally resolved my problem. BTW, while I was working this issue and try various suggestions, I got a virus and which of course added to my frustration...

• How to install windows 8 using an product key OEM (under construction)

  Hello everyone. I bought a computer laptop sony vaio about a year ago and he had 8 integrated windows which clrealy means that the product key is embedded in the motherboard. Now the thing is I want to dual boot with ubuntu and use it alongside windows 8.1 (that I've updated 8) and the ubuntu installation went a little worse. When I went to reinstall I erased by mistake my hard drive and all I was left with was an operating system reinstalled ubuntu.  Now I know that the product key for the windows kernel 8 is in my motherboard, so I want to install windows 8 on it, but it seems that there is no way I can get the iso standard for installation. I tried to use the 'upgrade of windows with a single product key' by Microsoft after the extraction of my key by using a program, but it says my key cannot be used to obtain a version of windows.

  Im stuck pretty bad here now, and any help would be appreciated. -There should be a solution because after all I don't have a genuine product key-

  As you probably know, most of the machines are supplied with recovery disks more, they just put in another partition on the hard drive.  Sometimes, you can get this in now shift while clicking the option restart from the menu of the power.

  Given that, most of the manufacturers have prepared with their own solutions. My computer Vaio from Sony has a button of special pinhole that I had to press with a paper clip to enter into recovery mode.  Other manufacturers have other options, some require a USB thumbdrive to enter recovery, or a CD.

  At this point, you probably want to contact your manufacturer to find out which method of recovery they use.  I hate to bring bad news, but they'll probably say "why did not a recovery USB disk? (as if someone creates their own set of disks of repair when they receive a new computer).

  Help a friend with a Dell laptop (did not have a problem, but wanted to install a pure one)

  passing), Dell sent us a free night FedEx ship from a restore CD. The manufacturer of your can be so nice. I know that Sony was not. If the recovery of my Vaio button didn't work, they wanted $60 for a CD!

  Anyway, the manufacturer is your best bet, that now, if you don't have a USB self made for recovery.

• Capital - asset group

  Hello
  
  Anyone who is familiar with the following grouping fields in FA is:
  
  P partial unit retirement
  Pension complete F
  T of outgoing transfers
  N no active that depreciates
  Reclassified R
  B Bonus depreciation amount
  
  Thank you

  Hello.

  In fact, all other indicators come from the FA_TRANSACTION_HEADERS table.

  Octavio